Could not complete the command because there is not enough memory (RAM)

Hi Folks:
I am running into an error (Could not complete the command because there is not enough memory (RAM)) when trying to open any file of any size or any format.on my Mac.
This error occurs when:
No other applications or files are open
Upon a fresh reboot
After Repairing Disk Permissions
The files can be opened by Fireworks and other image editor apps or video apps
My SPECS:
OSX 10.5.8
4GB 667 MHz DDR2 SDRAM
120.41 GB Free space available
Graphics: GeForce 8600M GT - VRAM 512 MB
PhotoShop settings:
Available RAM 3072 - Let PS use 90% (2764)
I really appreciate the help.

http://forums.adobe.com/thread/370739?tstart=0
http://forums.adobe.com/thread/370735?tstart=0

Similar Messages

Could not complete the command because there is not enough RAM

i have already made a few changes to an image but when i try to Distort>Wave then click ok it comes up with that message. i have looked on other forums which say to allocate more memory to photoshop but that doesn't work for me. Any ideas?

You did not say which verson of PS you are using. If CS5 and a 32 bit system you are handicapping youself.
Works best in 64 bit mode with 6-8 gigs of RAM.
If you are limited you keeping what you should also check you have enough free area on the scratch disk.

Trying to render smart filters at high resolution: 'Could not complete the command because Appletalk is not connected'

I'm trying to increase the size of a large file for printing as a banner. Whether I try to up the resolution or increase the size (maintaining the resolution) I get an error when the resizing finishes and it tries to recreate the halftone filter:
'Could not complete your command because Appletalk is not connected'
Any ideas?
Colin
Macbook Pro (late 2013)
2.3 Intel i7
16gb Memory
Graphics: NVIDIA GeForce GT 750M 2048 MB.

I seem to be able to work around the problem by converting the image I want to halftone into a smart object. That said, the error has popped up again a few times, especially when I've tried to apply the filter to an object that's larger than the canvas. I have to crop it to the canvas size and then it seems to work. The message has also popped up doing other random things.
It seems to be connected to lack of space for my scratch disks more than anything (though correlation is not causation so who knows). What that has to do with a network error God alone knows though.

Could not complete Save command because there is not enough memory (RAM).

So yeah. Recently I keep facing this problem when I am using my PSCS5. It happens randomly, be it on single-layered work or multi-layered ones.
I can't do anything because when this happens... yeah, I lose my work for sure - I can close every program except PS but it is still like this. In fact it just happened again, which prompted me to put this up.
I took a screenshot although I think it is not needed. Basically this error occurs. And it doesn't... tell me what to do.
The thing is, I am on Win7, 3GB usable. Based on my task manager I have only used 1.91GB of memory - there's a whole 1 GB more unused, yet I get this error. CPU usage is at a sweet 1~5%.
So... any advice on what I am supposed to do? >< Thanks all.

Though most of my experience is with Photoshop on my 64 bit system, I do do some testing on Windows 7 32 bit, and frankly I'm not finding problems with cranking the Photoshop RAM use even all the way up. I do this sometimes because my own plug-ins use malloc() and free(), not Photoshop's buffer suite, in some places and I need to see how they behave when Photoshop's got all the RAM for itself.
Thing is, Photoshop really CAN'T grab all the RAM for itself on a 3 GB 32 bit system... It can only glom on to up to only 2 GB in the normal case, so I really, really doubt that having your RAM setting up to (only) 75% is a problem.
Common lore about how to manage Photoshop's memory use is somewhat based on past experience with different operating systems, and that's simply been changed some with the modern Windows systems.
But I hope that the change does help you. Maybe just that it's different will be helpful, in that it will move things around.
-Noel

Could not complete the command because the extension could not be loaded

I was working in 3D with PS CS5 Extended. I went to the Window drop down menu and selected Color. I got the message "Could not complete the command because the extension could not be loaded" and the color pallet and swatches would not appear. I had to click on OK the error message three times to get rid of it as it kept reappearing. The the mini bridge and Brush pallets opened, including Brush Presets tab and Clone Source tab instead of the color pallets. How can I get my color pallets back?
I am on an iMac Intel core i3 running OS X Lion 10.7.2
Thanks for any help.
Thanks,
Don

I unstalled Photoshop. Then I installed on another drive. External. It did the same thing!!!! No mini-bridge, or any extentions loading. I don't know what is wrong.
I read something somewhere about a Panels file in photoshop. So I'm looking there.

Could not complete the command because of a problem using the Adobe Color Engine

Hi all
This bizarrely started this morning - completely out of the blue - and I've no idea why.
Setup: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)
Am working on images exported from LightRoom 4 (16bit A3 Pro Photo RGB PSDs) in PhotoShop CS5.
As part of my image grading process I have a PhotoShop Action that does the following: copy layer to new document (document respects all of copied layer settings) > Image > Adjustments > HDR toning > apply a certain HDR preset > copy to resultant image back to original doc > set opacity as 40%.
Totally out of the blue, after having this action for about 2 months, this morning I start getting a warning dialog of "Could not complete the command because of a problem using the Adobe Color Engine" and the action fails. The failure seems to take place at the 'make document' part of the action and seems to somehow be related to the contents of the clipboard.
I've tried trashing and re-creating the action. It works first time out fine and then - on the next image - errors again.
At present I can only safely carry out the work 'manually' by completing all the actions myself.
I can think of no settings that have changed and the OS hasn't been updated in a while.
I have found one other thread on a similar problem in PhotoShop Elements, but no definitive solution.
Any help appreciated as I have a shedload of stuff to process.
Best wishes
TP

OK: trash of prefs didn't work. Tried thrice. Re-created orig action. same problem.
BUT!
Your 'Image > Duplicate' suggestion does seem to work. If I use that in a new action as the method for creating the HDR version doc (instead of 'Select > Copy > New > Paste), it seems to work.
Will try that out this afternoon, but for now: WIN!
Many thanks for the suggestion!
TP

Could not complete the command because of a program error

I am running CS3 and for some reason, I get this error on many of the filter options. To reproduce:
- load any picture - it does not matter what format I use
- create a new layer by selecting the new layer icon at the bottom of the layers pallet
- with the new layer selected, going to the menu item filter/blur/Gaussian Blur
I have reset the preferences by pressing ctrl/alt/shift while bringing up Photoshop.
I also have reinstalled (repaired) Photoshop.
I've tried many different pictures with several formats (raw, .psd, .jpg) with no luck.
Interestingly enough, the filter Lens Blur does come up with the screen.
What am I doing wrong? This should not be rocket science.....
Thanks,
Steve

"...create a new layer by selecting the new layer icon at the bottom of the layers pallet..."
That produces a blank layer. With this blank layer selected, you should get the message "Could not complete the command because the selected area is blank".

Could not complete the command because of a problem using the Adobe Colour Engine??

When I am playing back a set of recorded actions, I receive a message that says "Could not complete the command because of a problem using the Adobe Colour Engine". This occurs after I copy a part of an image to paste it onto a new file. It occurs during the "Make" part(making a new file) and I was just wondering how to fix it.

It's a known (but esoteric) bug in Photoshop CS5 and earlier, seen with grayscale images. It used to crash utterly, but after I reported it I think they patched Photoshop 12.0.something to avoid the crash. However, the step still fails when you make a new grayscale image in an action.
I saw it because I created an action to paste the clipboard into new document, all in one motion. It virtually always works as long as I have a colored image in the clipboard. But not grayscale.
One workaround, which is not particularly convenient, is to turn on prompting for the Make new image step. I haven't used this workaround for a while, but it used to be that if you confirmed the "File New" operation manually it would continue and work. I don't know if the workaround is still valid.
-Noel

Hi when i open Photoshop i get this message in a little box (could not complete the command because Photoshop was unable to find the JavaScript plug-in.) Im using the trial version of Photoshop

im wondering if anyone can help with this
I get this message when i open PhotoShop
(could not complete the command because Photoshop was unable to find the JavaScript)

Photoshop installer should have installed a ScriptingSupport Plugin in each version of Photoshop you installed. Scan your system for ScriptingSupport I found six on my windows system. Here where I found them:

Safari could not download the file because there is not enough disk spacr

safari could not download the file because there is not enough disk space I have a 1TB hard drive and only use a small amout of space.Mac os x mountain lion (12.8.2), HD 978.59 free out of 999.35GB.Please help Brenton

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

"Safari could not download the file because there is not enough disc space"

"Safari could not download the file because there is not enough disc space"
I have 60gb available on my MBA and I have "read and write" privileges for the download folder. This error seemingly came out of nowhere. It doesn't matter if the file is 1gb or 10mb, I'll get the error. All I have to do is remove the .download extension and I can use the file which is complete despite the error.
This is really annoying so any help would be appreciated.

I never used to have a problem with creating a new folder and moving the download into it
But you'll have a problem if you do it now.

Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
Mylenium

Lighting effects not working, 'Could not apply the workspace because there is not enough memory (RAM)' with 4GB RAM?

Tried to use 'render/lighting effects' on 5 more or less new different laptops now. All kind of Window versions.
They all have at least 4GB RAM. The Graphic Card is compatible.
Layer to work on is RGB-Type.
It's all about Photoshop CC 2014, trial version.
When I go to 'Lighting effects' it says first:
'The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly.'
- I switched the 'Use Graphics Processor' on and off and restarted new - nothing happens.
- Video card is compatible.
Second it says:
''Could not apply the workspace because there is not enough memory (RAM)'
- RAM on all the computers I tested it with is at least 4GB
Please help!

We would need to know the amount of Video ram you have. If it is above 512 MB, then check for driver updates.
Windows OS
Click Start.
On the Start menu, click Run.
In the Open box, type "dxdiag" (without the quotation marks), and then click OK.
The DirectX Diagnostic Tool opens. Click the Display tab.
On the Display tab, information about your graphics card is shown in the Device section. You can see the name of your card, as well as how much video memory it has.
Once you know the kind of graphics card you have, visit the manufacturer's website to download the latest driver. Here are links for downloading drivers from the most common graphics card manufacturers:
NVIDIA: http://www.nvidia.com/content/drivers/drivers.asp
AMD: http://support.amd.com/en-us/download
Intel: http://support.intel.com/support/graphics/

The operation cannot complete because there isn't enough memory (RAM) available

Illustrator CS5 Verison 15.1 on a MacBook Pro Retina, 15-inch, Early 2013 Processor 2.7 GHz Intel Core i7, Memory 16 GB 1600 MHz DDR3,
Graphics NVIDIA GeForce GT 650M 1024 MB. Illustrator opens .ai and .pdf files. When I try to open a .dwg file, I get the following message, “The operation cannot complete because there isn’t enough memory (RAM) available”. I have been using the program for some time to successfully open .dwg files. This is a recent occurrence and I have not made any changes to the hard drive other than installing OS 10.9

Have you already opened that specific file at some former time?
Have you already tried a restart?
Apart from that:
Illustrator CS5 cannot use more than 3 GB of RAM, no matter how much is installed. OS 10.9 causes all kinds of problem even with newer versions of Illustrator.

Ai - The operation cannot complete because there isn't enough memory (RAM) available.

Hi I got this message "The operation cannot complete because there isn't enough memory (RAM) available." when I was trying to scale the image or transform it to 3D. I just signed up for Adobe Creative Cloud a few days ago. Please help. Thank you.

Have you already opened that specific file at some former time?
Have you already tried a restart?
Apart from that:
Illustrator CS5 cannot use more than 3 GB of RAM, no matter how much is installed. OS 10.9 causes all kinds of problem even with newer versions of Illustrator.

Could not complete the command because there is not enough memory (RAM)

Similar Messages

Maybe you are looking for