Could not complete the smart sharpen command because there is not enough memory (RAM)

Hi,
I'm trying to complete the AutoSharpen (Filter->Sharpen->AutoSharpen) feature but, i'm getting the following error when i click on "Ok".
Error in Dialogue Box "Could not complete the smart sharpen command because there is not enough memory (RAM)".
Request the SME's and Adobe community team members to help me overcome this step to proceed further.
I'm using a 32 Bit Win7 OS and have a 4GB RAM on board.
Regards,
Sachin_

As Curt says, Photoshop got more hungry for RAM from CS4, and 32bit systems just weren't cutting it, but there was a trick we used to use to squeeze a bigger slice of the available installed 4Gb
Run the Command Prompt as Administrator, and type:
"bcdedit /set IncreaseUserVa 3072" (I can't remember whether the quote marks are needed or not.)
That used to work for me with XP, and it is _supposed_ to work with Windows 7, but I know it doesn't always.
If it doesn't work, or has unwanted consequences, turn it off with:
"bcdedit /deletevalue IncreaseUserVa"
If you want to research it before trying, seach for 'Windows 7 3Gb switch'.

Similar Messages

"Could not complete the Save As command because there is not enough memory (RAM)"

I'm trying to save a file and an error keeps popping up saying ""Could not complete the Save As command because there is not enough memory (RAM)". I'm using Adobe Photoshop CS5 Extended. I have no other windows open. I checked the RAM allocated to Photoshop, in the Preferences > Performance tab, and I have tried it at 60% (980 MB) and 90% (1483 MB), still with no luck. I tried Purging the undo, clipboard and history with no help either.
I read a couple of other posts that were similar to this and people suggested " resetting the preferences as described in the FAQ." but is there any way to do this without closing Photoshop?
I can't loose this file, so any help woudl be appreciated.

I'm sorry to hear it locked up on you, and with only a GIF saved (which is probably useless). Perhaps I should have suggested Select All / Copy first.
As far as what went wrong... It might be helpful to know some of the specifics:
What operating system are you running?
Do you see any errors in the Windows error logs corresponding in time to this problem, and if so, what are the specifics?
Do you have Photoshop updated to 12.0.3?
What video card do you have, and do you have updated video drivers?
Is OpenGL enabled in Edit - Preferences - Performance?
What kinds of operations did you do since you started the session of Photoshop that ultimately went bad?
What other applications were you running?
What kind of computer is it (specifically, can you install more RAM)?
It might not be possible to pinpoint just what went wrong, but perhaps we could make some general suggestions that might help.
-Noel

Could not complete the Refine Edge command because of a program error.

This is kind of me being a smart ***… but, I’ve found an Error with the new refine edge. And I’ve solved the problem:
If you check “remember settings” and refine a selection with output set to “New Layer with Layer Mask” and then try and refine another selection when you have an adjustment layer selected, the “New Layer with Layer Mask” is greyed out, but unless you change the output setting to something not greyed out, you get the error "Could not complete the Refine Edge command because of a program error.”.
I’m sure there’s a better place I could have posted this and all that, but there you have it.
Oh, and the solution is to just change the “Output to” to something not greyed out.

Without system information and details on what exactly you are trying to do like what channel/ mask/ slection you are trying to refine in what specific image nobody can really say anything. Such errors are always specific. It would be best if you provided a screenshot of the selection in the image.
Mylenium

Could not complete the Render Video command because of a problem with Adobe Media Encoder.

So initially, my problem was solved, but it stopped working again. Same issue. I tried installing the media encoder app, but no luck please help!
Here's the original post:
Hello, I'm running a macbook pro retina, and previously I was able to render video with no issue, and now this is popping up. I've tried deleting and reinstalling photoshop, but it was not helpful. I would very much appreciate any help or guidance. Thanks!
Here's the error message I get:
Could not complete the Render Video command because of a problem with Adobe Media Encoder.
Here's the original thread: Could not complete the Render Video command because of a problem with Adobe Media Encoder.

Have you tried re-installing Photoshop?
Benjamin

Video rendering : Could not complete the Render Video command because the settings in the file are invalid. What is this?

not sure how to get past this?

0s x 10.9.5
2.9Ghz Intel Core i7
16gb ram
Intel HD Graphics 4000 1024 MB graphics
Adobe CC 2014
When I was half way through exporting it. That message came up.
Could not complete the Render Video command because the settings in the file are invalid.

"Could not complete the render video command because of program error?"

Hello,
Does anyone know what to do to fix this problem?
When I go to File>export>video render> then I click for it to render, up
pops this window saying "Could not complete the render video command
because of a program error." I would appreciate any and all work around
ideas.
Thanks
Windows XP Pro SP3
Photoshop extended CS3 with all the latest updates.
Asus P5B Deluxe Cpu Duo 2 E8400 4gigs ram.

Thank you so much for your reply. My PC does have the latest quick time version.I went into QT Preferences and under advance, I checked "Enable encoding using legacy codecs" but this change didn't help. Is that the one you were talking about?. Where do I find "GDI-only mode without hardware acceleration" ? The weird part is no matter what format I choose to render out I still get the pop up. Photoshop doesn't even try to do anything at all, just shoot up the error window. Is there by chance something I needed to install but didn't? I install photoshop CS3 as part of production premium set. PP and AF render video just fine no problems.

Could not complete the ... command because of a problem with the filter module interface

I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
Stu

Not sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu

"Could not complete the image size command because the file name was not valid"

Hello,
Some one please help me,when i try to resize psd file its showing this message ...whats the issue ???
"Could not complete the image size command because the file name was not valid"
Thanks !

Can you change other images via Image > Image Size?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)

Can't copy text into photoshop: Could not complete the Paste Text command because the clipboard data is empty or invalid.

Getting this error message for 2 weeks: Could not complete the Paste Text command because the clipboard data is empty or invalid.
What's up?

I have the same problem!
Can't find the solution...

When I try to use the Smart Brush I keep getting this message "Could not use the Smart Brush tool because it is not a valid Photoshop document"

When I try to use the Smart Brush I keep getting this message "Could not use the Smart Brush tool because it is not a valid Photoshop document". Can someone please help me fix this? It's never done this before until now...

First go to the editor preferences>general and click this button, then restart the editor and try again. If that doesn't do it, more info, like your version of PSE and your operating system:

The operation cannot complete because there isn't enough memory (RAM) available

Illustrator CS5 Verison 15.1 on a MacBook Pro Retina, 15-inch, Early 2013 Processor 2.7 GHz Intel Core i7, Memory 16 GB 1600 MHz DDR3,
Graphics NVIDIA GeForce GT 650M 1024 MB. Illustrator opens .ai and .pdf files. When I try to open a .dwg file, I get the following message, “The operation cannot complete because there isn’t enough memory (RAM) available”. I have been using the program for some time to successfully open .dwg files. This is a recent occurrence and I have not made any changes to the hard drive other than installing OS 10.9

Have you already opened that specific file at some former time?
Have you already tried a restart?
Apart from that:
Illustrator CS5 cannot use more than 3 GB of RAM, no matter how much is installed. OS 10.9 causes all kinds of problem even with newer versions of Illustrator.

Ai - The operation cannot complete because there isn't enough memory (RAM) available.

Hi I got this message "The operation cannot complete because there isn't enough memory (RAM) available." when I was trying to scale the image or transform it to 3D. I just signed up for Adobe Creative Cloud a few days ago. Please help. Thank you.

Have you already opened that specific file at some former time?
Have you already tried a restart?
Apart from that:
Illustrator CS5 cannot use more than 3 GB of RAM, no matter how much is installed. OS 10.9 causes all kinds of problem even with newer versions of Illustrator.

Could not complete the camera raw command because of disk error

Hi,
First off, I am using a Mac (OS X ver. 10.9.2) and Adobe Creative Cloud Photoshop (2014). I just downloaded the preset pack off VSCO for Adobe Camera RAW and I am having trouble getting it to work.
When I try to launch the "Camera Raw Filter", I get the message 'Could not complete the Camera Raw Filter command because of a disk error.' (this also happens sometimes when i try to import the RAW files into photoshop...I don't know if it's the way i'm importing them or what...?)
I've tried uninstalling and re-installing photoshop cc several times and restarting my computer and have searched online but cannot find anything at all to help me (or i just don't understand, urgh).
Please help!

I'm getting same error and I think it's related to Adobe Camera Raw. I see several manifestations of this problem:
1) Open a RAW file (.NEF) directly using Photoshop CC 2014 - I get an error "Could not complete your request because of a disk error."
2) In Photoshop CC 2014. I go to Filter > Camera Raw Filter - I get an error "Could not complete the Camera Raw Filter command because of a disk error."
I can do the following successfully:
1) Open and edit a RAW file successfully in Lightroom 5.7
2) Open a RAW file successfully in Photoshop from Lightroom 5.7 (when I do an "Edit in Photoshop CC 2014" from Lightroom 5.7)
I was previously on LR3 and Photoshop CS5 on Mac OSX 10.6.8 (Snow Leopard) and bought an upgraded MacBook Pro last week.
My upgraded system is now:
Mac OSX 10.10.1 (Yosemite)
Photoshop CC 2014
Lightroom 5.7
I've uninstalled / reinstalled Photoshop and Lightroom numerous times and the problem still occurs.
Anyone else having the same problem?

Why am I getting this err -Could not complete the Split Extrusion command because of a program error

To recreate this error, draw 2 simple shapes in Illustrator CS6, copy and paste them together as a Shape layer in Photoshop CS6.
Then go to 3D > New 3D Extrusion from Selected Path. I just accept the defaults.
Then go to 3D > Split Extrusion.
The error is thrown at this point. No matter what I do, I can't get it to work.
I've tried rasterizing the shape, but then I get a different error. When I select 3D > New 3D Extrusion from Selected Layer, I get the error: "Could not complete the New 3D Extruions from Selected Layer command because the path is too complex." This is ridiculous. I can't get the 3D to work at all.
Is Photoshop just this buggy or am I trying to do something that should not be possible? If so, the error message certainly should be more helpful than what I'm seeing.

You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

Safari could not download the file "Mad_Zach_Fingerdrumming_Tutorial_Soundpacks.zip" because there is not enough free disk space.

What do I need to do so these download?

Available disk space can be viewed at the bottom of a Finder window.
There may not be enough available disk space for those files to open.

Could not complete the smart sharpen command because there is not enough memory (RAM)

Similar Messages

Maybe you are looking for