'could not connect to administration server" in essbase console

Hello friends,
while i was trying to login to eas console iam getting this error message as "could not connect to administration server" even after restarting the services.
Thanks in Advance..

Rakesh,
Is this the first time you are trying to log on to EAS console ?
First check if your database is up or not ( with which essbase configuration is done).
If your db services are running, then Go to Oracle EPM system, EAS and Start Administration Services from Start Programs ( I assume you are on 11 and on Windows).
If still you get the same problem, then check the logs.
@Prabhas,
To my knowledge and based on Essbase architecture, both EAS and Essbase services are different. If Essbase is up and EAS is down, still you can access Essbase through add-in or some other tools.

Similar Messages

  • Could not  connect to Administration server Essbase in EAS console 11.1.2.2

    Hi All,
    I successfully installed and configured Essbase 11.1.2.2 version. When I tried to connect with administration server in eas console it throwing me error as,
    Could not connect to Administration server Essbase.
    Kindly guide me.
    Thanks and Regards
    Sai

    Hi John,
    Thanks for your response. These are the following message I found in HyS9eas-sysout.log and HyS9eas-syserr.log.
    HyS9eas-sysout.log:
    <May 11, 2012 8:43:26 PM IST> <Error> <HTTP> <BEA-101216> <Servlet: "InitServlet" failed to preload on startup in Web application: "WebAnalysis".
    com.hyperion.atf.services.ServiceManager$ServiceRecursiveInitException: Could not start critical service: "assignable.admin", all services are being rolled back.
         at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:591)
         at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:309)
         at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:341)
         at com.hyperion.atf.security.assignables.AssignableManager.getAssignableAdmin(AssignableManager.java:28)
         at com.hyperion.atf.security.assignables.AssignableManager.getDefaultHomeDirLocation(AssignableManager.java:77)
         Truncated. see log file for complete stacktrace
    >
    <May 11, 2012 8:43:27 PM IST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'WEBANALYSIS [Version=11.1.2.0]'.
    weblogic.application.ModuleException: [HTTP:101216]Servlet: "InitServlet" failed to preload on startup in Web application: "WebAnalysis".
    com.hyperion.atf.services.ServiceManager$ServiceRecursiveInitException: Could not start critical service: "assignable.admin", all services are being rolled back.
         at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:591)
         at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:309)
         at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:341)
         at com.hyperion.atf.security.assignables.AssignableManager.getAssignableAdmin(AssignableManager.java:28)
         at com.hyperion.atf.security.assignables.AssignableManager.getDefaultHomeDirLocation(AssignableManager.java:77)
         at com.hyperion.analyzer.servlet.HYAInitServlet.checkUserDir(Unknown Source)
         at com.hyperion.analyzer.servlet.HYAInitServlet.init(Unknown Source)
         at javax.servlet.GenericServlet.init(GenericServlet.java:241)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
         at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: com.hyperion.atf.services.ServiceManager$ServiceRecursiveInitException: Could not start critical service: "assignable.admin", all services are being rolled back.
         at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:591)
         at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:309)
         at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:341)
         at com.hyperion.atf.security.assignables.AssignableManager.getAssignableAdmin(AssignableManager.java:28)
         at com.hyperion.atf.security.assignables.AssignableManager.getDefaultHomeDirLocation(AssignableManager.java:77)
         Truncated. see log file for complete stacktrace
    >
    <May 11, 2012 8:43:39 PM IST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <May 11, 2012 8:43:39 PM IST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EPMServer.>
    <May 11, 2012 8:43:42 PM IST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    <May 11, 2012 8:44:11 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <May 11, 2012 8:44:12 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <May 11, 2012 8:44:21 PM IST> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
    <May 11, 2012 8:44:24 PM IST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_29\jre\lib\security\cacerts.>
    <May 11, 2012 8:44:29 PM IST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
    Version: V3
    Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: Sun RSA public key, 512 bits
    modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
    public exponent: 65537
    Validity: [From: Fri Mar 22 01:42:27 IST 2002,
                   To: Wed Mar 23 01:42:27 IST 2022]
    Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
    Key_CertSign
    Algorithm: [MD5withRSA]
    Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 172.16.2.14:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 172.16.2.14:9443 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 127.0.0.1:9443 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <May 11, 2012 8:44:29 PM IST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EPMServer0" for domain "EPMSystem" running in Production Mode>
    <May 11, 2012 8:44:29 PM IST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
    <May 11, 2012 8:44:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <May 11, 2012 8:44:38 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    HyS9eas-syserr.log:
    Creating rebind thread to RMI

  • EAS server error: Could not connect to administration Server

    Hi,
    I have installed Hyperion suite in Windows server 2008 R2. It was working fine but now when i tried to login in to the EAS console, I am getting the following error:
    "Server Error: Could not connect to administration server".
    I tried accessing the same through the web URL and I found "404 error - file or directory not found".
    I verified all my services are up and running fine. I am able to connect to the essbase sever through Excel as well as planning.
    The log retireved from the HyS9eas-sysout.log file is below:
    <Sep 11, 2013 7:06:56 AM JST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Sep 11, 2013 7:06:57 AM JST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Sep 11, 2013 7:06:58 AM JST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
    <Sep 11, 2013 7:07:04 AM JST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0  Fri Dec 17 20:47:33 PST 2010 1384255 >
    <Sep 11, 2013 7:07:15 AM JST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
    <Sep 11, 2013 7:07:15 AM JST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
    <Sep 11, 2013 7:07:15 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Sep 11, 2013 7:07:15 AM JST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00410. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>
    <Sep 11, 2013 7:07:48 AM JST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Sep 11, 2013 7:07:56 AM JST> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
    <Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getDomainConfiguration()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getRuntimeService()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
      return com.bea:Name=EPMSystem,Type=Domain
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
    Calling getRuntimeService()
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\registry_update.xml file
    EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
    Template for EAS#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar
    Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM Calcmgr, Oracle EPM Planning libraries, Oracle EPM EAS libraries, Oracle EPM Misc libraries, Oracle EPM Xerces libraries]
    BPMUI shared webapp not referenced from EAS#11.1.2.0
    Application name: EAS#11.1.2.0
    Application source: eas.ear
    Server name: EssbaseAdminServices0
    Server port: 10080
    Server SSL port: 10083
    Application context: eas
    Registry product type: ESSBASE_PRODUCT
    Registry physical web application type: ADMIN_SERVICES_WEB_APP
    weblogic.Name property is 'EssbaseAdminServices0', seems to be WebLogic mode
    registry.isRegistryDatabaseCreated()true
    Registry was initialized sucessfully
    Executing pre custom update for EAS#11.1.2.0
    EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
    <Sep 11, 2013 7:09:06 AM JST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EAS [Version=11.1.2.0]' due to error java.lang.NullPointerException.
    java.lang.NullPointerException
    at java.io.File.<init>(File.java:222)
    at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.NullPointerException
    at java.io.File.<init>(File.java:222)
    at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    Truncated. see log file for complete stacktrace
    >
    <Sep 11, 2013 7:09:06 AM JST> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>
    <Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
    <Sep 11, 2013 7:09:22 AM JST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
    <Sep 11, 2013 7:09:48 AM JST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
      Version: V3
      Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
      Key:  Sun RSA public key, 512 bits
      modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
      public exponent: 65537
      Validity: [From: Fri Mar 22 05:12:27 JST 2002,
                   To: Wed Mar 23 05:12:27 JST 2022]
      Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
      Key_CertSign
      Algorithm: [MD5withRSA]
      Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82  .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4  .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF  .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C  .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.14.126.11:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.14.126.11:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.14.34.75:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.14.218.238:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.14.218.238:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 10.14.34.75:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>
    <Sep 11, 2013 7:09:48 AM JST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
    <Sep 11, 2013 7:09:48 AM JST> <Warning> <Server> <BEA-002611> <Hostname "SJ015040", maps to multiple IP addresses: 10.14.126.11, 10.14.34.75, 10.14.218.238, 0:0:0:0:0:0:0:1>
    <Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
    HyS9eas-syserr.log is empty and I dont find anyother details from the other log files.
    Kindly help me out in solving this issue.
    Thanks in advance.
    Regards,
    Balaji P

    Hi John,
    Sorry for replying late.
    I ran the EPM diagnostic and found EAS & APS application are failed. So as you mentioned, i tried re-deployment through EPM configurator.
    But Re-configuration fails with error "An unexpected error occurred and the application will have to shut down" .
    When i looked in to the Config tool.log,I got the following messages.
    [2013-09-17T18:17:04.635+09:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Parsing server FinancialReporting0 on port 8200 from registry
    [2013-09-17T18:17:04.827+09:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Unexpected error:[[
    java.lang.NullPointerException
    at com.hyperion.hit.tool.deploy.utils.UIPortUtil.<init>(UIPortUtil.java:83)
    at com.hyperion.hit.tool.deploy.utils.UIPortUtil.getInstance(UIPortUtil.java:53)
    at com.hyperion.config.wizard.DeploymentField.getAppServerDeploymentData(DeploymentField.java:235)
    at com.hyperion.config.wizard.DeploymentField.<init>(DeploymentField.java:56)
    at com.hyperion.config.wizard.impl.DeploymentForm.<init>(DeploymentForm.java:57)
    at com.hyperion.config.wizard.impl.DeploymentState.initializeBeforeShowOnNext(DeploymentState.java:56)
    at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:522)
    at java.lang.Thread.run(Thread.java:619)
    Since it is similare to the Oracle konwledge base article - (Doc ID 1570293.1), I tried adding the shared service domain to the Windows host file. But i am still recieveing the same error message as above.
    Appreciates your help.
    Thanks & Regards,
    Balaji P

  • Could not connect to administration server

    Hi All,
    We are using Essbase 9.3.1.2 and installed in sunsolaries 64 bit system. I have sucessully done the configuration of EAS, Essbase Server and Shared services however when i try to login into the the console with user admin and i am getting the error as "could not connect to administration server." I can connect to excel add-ins sucessfully and also i am able to connect to the server through maxl but i am getting the above error while connecting through essbase console. Kindly help me out in this regard.
    Note: I have done the configuration multiple times but the same error persists.
    I have also restarted the services many times.
    Regards,
    VJ

    Hi,
    I have solved the issue. We have not done the configuration properly. We are giving the sever name instead we should give it as EAS for EAS and then configure and it works fine.
    regards,
    VJ.

  • EAS Error: Could not connect to Administration Server

    Hi Genius,
    I have installed and configured Hyperion (11.1.2.1) Essbase & Planning successfully on windows server 2008 64 bit. For that I installed Oracle 10g Standard Edition as supported RDBMS. Due to RAM consumption I planned to install the Oracle Express Edition instead of Standard Edition. For that I export the tablespace which contains metadata of Hyperion products from existing database(SE) to current database(XE). After that I reconfigured all the Hyperion Products.
    Once re-configuration completed, I tried to log-in to the Administration Server via EAS Console by providing server name as localhost and username as Admin. Then EAS console throwing error as "Could not connect to Administration server".
    To solve this issue I tried following steps,
    1> Remove the Cwallet.sso and create a new Cwallet.sso by using orapki bat file.
    2> Backup the original ESSBASE.SEC file and rename the ESSBASE.BAK file to ESSBASE.SEC then I started the Essbase Administration service.
    3> I re-installed and re-configured the EAS console.
    After following these steps I am not able to overcome this issue.
    For your kind information,
    1> I can able to login to the Essbase through ESSCMD.
    2> I can able to view the list of essbase applications through Smart View.
    Kindly guide me how to overcome this issue.
    Best Regards
    SC

    Hi John,
    Thanks for your response. I observed the EAS logs clearly and came to know that there were no errors in Hypeas-syserr.log.
    The warnings listed below are mentioned in Hypeas-sysout.log,
    Dec 11, 2013 6:18:46 AM PST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.><Dec 11, 2013 6:20:56 AM PST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <Dec 11, 2013 6:20:56 AM PST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
    <Dec 11, 2013 6:21:01 AM PST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    <Dec 11, 2013 6:21:26 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Dec 11, 2013 6:21:26 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Dec 11, 2013 6:21:50 AM PST> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
    <Dec 11, 2013 6:21:50 AM PST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Dec 11, 2013 6:21:50 AM PST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
    <Dec 11, 2013 6:21:51 AM PST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
    Version: V3
    Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4 Key: Sun RSA public key, 512 bits
    modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
    public exponent: 65537
    Validity: [From: Thu Mar 21 12:12:27 PST 2002,
    To: Tue Mar 22 13:12:27 PDT 2022]
    Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4] Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
    Key_CertSign
    Algorithm: [MD5withRSA]
    Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#< ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:ac10:538:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:40e8:3a49:3d4b:1fd1:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 172.16.5.56:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:40e8:3a49:3d4b:1fd1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 172.16.5.56:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on fe80:0:0:0:0:5efe:ac10:538:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Dec 11, 2013 6:21:51 AM PST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices1" for domain "EPMSystem" running in Production Mode>
    <Dec 11, 2013 6:21:51 AM PST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
    <Dec 11, 2013 6:21:56 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Dec 11, 2013 6:21:56 AM PST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode> 
    Best Regards
    SC

  • Unable to connect to administration server from essbase console,

    Hi All..
    After successfully completely installation and configuration of essbase 11.1.2.3 iam unable to connect to administration server from essbase console,
    and also while connecting to oracle database it says "oracle not found".
    essbase 11.1.2.3 is installed in windows 2008 server R1.
    kindly help us.

    Hi John 
    and thanks again for the reply
    These log files has following  information
    and rest of files are empty in the specified path.
            HyS9RaFrameworkAgentOut :
    Java App Loader V1.3 (C)2006 by Hyperion Inc.
    $> java -cp . -Dloader.application=xxx.app com.brio.one.common.utils.Loader [arguments]
    > Reading application file 'C:\Oracle\Middleware\EPMSystem11R1\common\raframeworkrt\11.1.2.0\bin\agent.app'...
    > Loading classes...
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/wksagent.jar ...OK
      file:C:/Oracle/Middleware/modules/javax.activation_1.1.jar ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/foundation.jar ..........OK
      file:C:/Oracle/Middleware/oracle_common/lib/java/shared/jsch/0.1.37/jsch-0.1.37.jar ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/iona63.jar ..................OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/comutil1_01.jar ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/eiengine.jar ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/misc/11.1.2.0/servlet-api.jar ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/JakartaCommons/jakarta-commons.jar ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/logJavaUtil.jar ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/javax.zip ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/bqservice.jar ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/bcel-5.1.jar ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/scorecard-search-api.jar ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/waservices.jar ...OK
      file:C:/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar ...OK
      file:C:/Oracle/Middleware/modules/com.bea.core.apache.velocity.dep_1.4.jar ...OK
      file:C:/Oracle/Middleware/modules/com.bea.core.apache.velocity_1.4.jar ...OK
      file:C:/Oracle/Middleware/modules/javax.mail_1.4.jar ...OK
    > Creating URLClassLoader...
    > Setting New Context ClassLoader...
    > Loading Main class 'com.oracle.cmc.Agent'...
    > Getting 'main' method...
    > Starting application...
           HyS9EssbaseStudio_epmsystem1-syserr:
    INFO    Server configuration file: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties.
    06:38:01 07/05/13 INFO    Logger configuration file: C:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bin\logging.xml.
    06:38:01 07/05/13 INFO    Starting up.
    06:38:01 07/05/13 INFO    Oracle Essbase Studio Server. Version 11.1.2.3.000, Build 4386, March 26 2013. Copyright © 2008 - 2013, Oracle. All rights reserved
    06:38:14 07/05/13 (system) INFO    Root folder for flat datasource files has been created: `C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\.\datafiles`.
    06:38:14 07/05/13 (system) WARNING Failed to load driver for sap.
    06:38:14 07/05/13 (system) WARNING Failed to load driver for teradata.
    06:38:14 07/05/13 (system) WARNING Failed to load driver for netezza.
    06:38:17 07/05/13 (system) SEVERE  Unable to establish connection to MySQL server: Communications link failure
    The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server..
    06:38:19 07/05/13 (system) SEVERE  Unable to establish connection to MySQL server: Communications link failure
    The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server..
    06:38:19 07/05/13 (system) SEVERE  Catalog.CannotInitializeStorage=Cannot initialize catalog storage. Make sure the server.properties file contains the correct information.
       -------------- Exception --------------
       com.hyperion.cp.catalog.exceptions.CatalogInitializationException: Cannot initialize data storage engine.
      at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:91)
      at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:104)
      at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:198)
      at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:81)
      at java.lang.Class.forName0(Native Method)
      at java.lang.Class.forName(Class.java:169)
      at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)
      at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1507)
      at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:233)
      at com.hyperion.cp.server.RequestListener.init(RequestListener.java:174)
      at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:214)
      at com.hyperion.cp.server.ServerMain.main(ServerMain.java:296)
    Caused by: com.hyperion.cp.driver.util.DriverConnectionException: Cannot establish connection to MySQL server.
      at com.hyperion.cp.driver.adapters.sql.mysql.MySQLConnection.createSQLConnection(MySQLConnection.java:130)
      at com.hyperion.cp.driver.adapters.sql.SQLConnection$ConnectionPool.<init>(SQLConnection.java:1229)
      at com.hyperion.cp.driver.adapters.sql.SQLConnection.construct(SQLConnection.java:450)
      at com.hyperion.cp.driver.ConnectionManager.getConnection(ConnectionManager.java:113)
      at com.hyperion.cp.driver.DriverEngine.getConnection(DriverEngine.java:60)
      at com.hyperion.cp.server.QueueableTask.setMetadataConnection(QueueableTask.java:53)
      at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:73)
      ... 11 more
    Caused by: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure
    The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.
      at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
      at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
      at com.mysql.jdbc.Util.handleNewInstance(Util.java:411)
      at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1116)
      at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:344)
      at com.mysql.jdbc.ConnectionImpl.coreConnect(ConnectionImpl.java:2333)
      at com.mysql.jdbc.ConnectionImpl.connectOneTryOnly(ConnectionImpl.java:2370)
      at com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2154)
      at com.mysql.jdbc.ConnectionImpl.<init>(ConnectionImpl.java:792)
      at com.mysql.jdbc.JDBC4Connection.<init>(JDBC4Connection.java:47)
      at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
      at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
      at com.mysql.jdbc.Util.handleNewInstance(Util.java:411)
      at com.mysql.jdbc.ConnectionImpl.getInstance(ConnectionImpl.java:381)
      at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:305)
      at java.sql.DriverManager.getConnection(DriverManager.java:582)
      at java.sql.DriverManager.getConnection(DriverManager.java:207)
      at com.hyperion.cp.driver.adapters.sql.mysql.MySQLConnection.createSQLConnection(MySQLConnection.java:123)
      ... 17 more
    Caused by: java.net.ConnectException: Connection refused: connect
      at java.net.PlainSocketImpl.socketConnect(Native Method)
      at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
      at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
      at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
      at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
      at java.net.Socket.connect(Socket.java:529)
      at java.net.Socket.connect(Socket.java:478)
      at java.net.Socket.<init>(Socket.java:375)
      at java.net.Socket.<init>(Socket.java:218)
      at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:257)
      at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:294)
      ... 32 more

  • Essbase Administration Services "Can not Connect to Administration Server"

    Hi
    Here I am installed Oracle EPM 11.1.2.2 Essbase,Planning and Reporting and after sucessfull configuration. When I tried to open Essbase Administration Console and there is no option to open administration console and I opened the Hyperion extraction setup folder and I installed Essbase Administration Console setup manuallay and after sucessful installation I try to Open and when I create new server and ir=ts created and then I am trying to connect server its throw this error
    Error: Can not Connect to Administration Server
    Please give me possitive things.
    Thanks in advance..

    Did you deploy the web applications to one managed server in the configurator, if you did then EAS is probably running on port 9000 so you would need to enter the server in the EAS console as servername:9000
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • EAS Console Error - Could not connect to Administartion server

    Hi All,
    Installed 64 BIT EAS on windows 2003 server R2 (64 BIT)
    Oracle Application Server (32 Bit) is used as a java application server.
    Configuratio of EAS was successfully completed but when i try to login into the console "Could not connect to Administartion server" error message appears.
    Checked "C:\Hyperion\logs\eas\easserver.log" which says:
    Information message (May 23, 2011 10:26:36 AM):
    Initializing AppManServlet
    Information message (May 23, 2011 10:26:36 AM):
    EAS_HOME=C:\Hyperion\products\Essbase\eas
    Exception message (May 23, 2011 10:26:36 AM):
    C:\Hyperion\products\Essbase\eas\server\bin\EnvironmentJni.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform
              java.lang.UnsatisfiedLinkError: C:\Hyperion\products\Essbase\eas\server\bin\EnvironmentJni.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform
                   at java.lang.ClassLoader$NativeLibrary.load(Native Method)
                   at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
                   at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1676)
                   at java.lang.Runtime.loadLibrary0(Runtime.java:822)
                   at java.lang.System.loadLibrary(System.java:993)
                   at com.essbase.eas.utils.Environment.<clinit>(Unknown Source)
                   at com.essbase.eas.server.AppManServlet.init(Unknown Source)
                   at javax.servlet.GenericServlet.init(GenericServlet.java:256)
                   at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2528)
                   at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:5006)
                   at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4930)
                   at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:5118)
                   at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1283)
                   at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:848)
                   at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:435)
                   at com.evermind.server.Application.getHttpApplication(Application.java:592)
                   at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:2280)
                   at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:2199)
                   at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1833)
                   at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:304)
                   at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:120)
                   at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:92)
                   at oracle.oc4j.admin.internal.ApplicationDeployer.bindWebApp(ApplicationDeployer.java:825)
                   at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:276)
                   at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:100)
                   at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
                   at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
                   at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
                   at java.lang.Thread.run(Thread.java:595)
    Warning message (May 23, 2011 10:26:36 AM):
    java.library.path=C:\product\10.1.3.1\OracleAS_1\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\product\10.1.3.1\OracleAS_1\opmn\bin;C:\product\10.1.3.1\OracleAS_1\opmn\lib;C:\product\10.1.3.1\OracleAS_1\bin;C:\WINDOWS;C:\WINDOWS\system32;C:\Hyperion\products\Essbase\eas\server\bin
    "

    Have a read of - "Can't load AMD 64-bit .dll on a IA 32-bit platform" When Starting Essbase Administration Services (EAS) [ID 848673.1]"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Safari will not open on my iPad Air...."Safari cannot open the page because it could not connect to the server." There were recent updates on my iPad Air. How can I fix this problem?

    How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days ago.....now on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."

    Hello Beckieor,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
    iOS: Troubleshooting Wi-Fi networks and connections
    Follow these steps to troubleshoot the above issues:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Running transactional replication on SQL server 2008R2 but: "The process could not connect to subscriber 'SERVER NAME'"

    I've set up Replication (transactional replication) between two remote servers. On the one of server that I configure Distribution & publication .another server is subscription. The subscription is all set & snapshot agent is started .but the actual
    replication doesn't take place.
    When viewing the Synchronization Status of the subscription, i get an error, saying "The process could not connect to Subscriber ‘Server name'."
    Clicking on start, this is the error message I get:
    The agent could not be started.
    Additional information:
    An exception while executing a Transact-SQL statement or batch.
    SQL Server Agent Error: Request to run job Server1-EDUSRV-Pubs-Server2-14 (from User Server1\Administrator) refused because the job is already running from a request by User sa.
    Change database context to 'EDUSRV'.(Microsoft SQL Server Error:22022)
    What can i do?
    Please help me.Thanks

    The error The process could not connect to Subscriber 'Server name' indicates that the Distribution Agent process account does not have enough permissions to connect to the Subscriber.
    If this is a push subscription, verify the Distribution Agent process account is db_owner in the distribution and subscription databases, is a member of the PAL, and has read permissions on the snapshot share.
    If this is a pull subscription, verify the Distribution Agent process account is db_owner in the subscription database, is a member of the PAL, and has read permissions on the snapshot share.
    The permissions required are covered in
    Replication Agent Security Model.
    If you have anymore questions, please let me know.  I hope this helps.
    Brandon Williams (blog |
    linkedin)

  • CS5 - Contribute could not connect because the server is down

    we have a client who has site hosted with us. They are using Contribute CS5 to connect to our web server and make changes to their site. They've been using Contribute for a month when all of a sudden they started receiving the error:
    Contribute could not connect because the server is down or not accepting connections. Please contact your administrator.
    Our server is up and running, their site is up, their ftp password is not locked and network said they can see can see end to end FTP transactions, logins and authentications. Communications between the application and the server is being allowed through all the various firewalls and devices along the way.
    I've done some research but cannot find a definitive resolution. Any help with your product would be appreciated.

    Can you please try clearing the Contribute preferences once?
    In Windows -
    Quit Contribute.
    Go  to C:\Documents and Settings\<username>\Local  Settings\Application Data\Adobe\ and delete the Contribute CS5 folder.  (In Windows Vista or Windows 7, go to  C:\Users\<username>\AppData\Local\Adobe\ and delete the Contribute  CS5 folder.)
    Also, run reg delete "HKCU\Software\Adobe\Contribute 6" /f
    In Mac -
    Quit Contribute.
    Go to Users/<username>/Library/Application Support/Adobe/ and delete Contribute CS5 folder.
    Also, go to Users/<username>/Library/Preferences and delete Adobe Contribute 6 Preferences file.
    Note: Doing this will remove all the existing connections in Contribute. It will be like a fresh installtion of Contribute.

  • Contribute could not connect because the server is down"

    My client tries to connect to the website with Contribute and
    gets the error "Contribute could not connect because the server is
    down" however I connect with no problems, using Contribute or
    Dreamweaver.
    I sent him a new connection key but the same error.
    Only problem I ever have is that sometimes I get a "can't
    save files to shared something-or-other" on exit after
    administrating, but I don't know if that's related or not - it
    never seems to affect anything at my end.
    Please help! Thanks

    OK, problem solved here:
    The access denied or file does not exist error was being
    caused by the fact there was a 0KB index file somehow.
    Once we got rid of that we still had the "Contribute could
    not connect because the server is down or not accpeting
    connections" error to get round.
    I had previously asked my client to go in an change the FTP
    settings in the Advanced screen to be Choose FTP server settings
    manually and select Use Passive FTP to connect to the server and
    make sure Use FTP Performance Optimization is not selected. I don't
    think this was ever done (and if it had been it would have saved me
    HOURS of time spent trying to diagnose this problem).
    Today I ended up backing up every contribute related file and
    folder on the server to my local machine then deleting them. After
    having done that I asked my client to create a new connection using
    the FTP details (not a connection key). That still didn't work so I
    got them to (and this time they did it) change the advanced FTP
    settings as above and BINGO! they can now publish.
    I'm guessing that if I had sent a connec tion key with the
    same settings specified in the Advanced FTP then it still would
    have worked.
    I hope this saves someone else some time. I am going to have
    a few beers now to celebrate.

  • Could not connect to the server "localhost".  Need Help!!!!!!

    I have installed CF MX 7.0.1 in my Mac (Intel Duo), but, for
    some reason I have to configure my "built-in-server" manually!!!
    When I tried to access to te configuration wizard @
    http://localhost:8500/CFIDE/administrator/index.cfm
    I get an error message: Could not connect to the server
    “localhost”. Please, help!!!!!!
    I uninstalled and reinstalled CF several times... no luck...
    I don't have experience with this product and at this point I'm
    going crazy!!!
    Thanks...
    Natacha
    Text

    quote:
    Originally posted by:
    lyfizgood
    I too am having problems with this. I purchased Studio8 and
    using the ColdFusion Getting Started tutorial, I get as far as
    testing server settings in Dreamweaver. But then when instructed to
    enter the RDS password, I get '1. The url specified for this site's
    testing server may be incorrect:
    http://127.0.0.1:8500/CFIDE/administrator/
    2. The testing server may be incorrectly configured (for example,
    ColdFusion may not be running).' I have tried not including 8500,
    changing to localhost, CFIDE/gettingstarted/tutorial, etc. I have
    also checked to see if jrun.exe is running to verify that CF is
    running. I assume that is one way of verifying. Any suggestions?
    Lyfisgood... youre using windows right? If so you may want to
    actually open a second thread... I saythis only as youll probably
    get more of a response as there seem to be more peopel running it
    on Win than OS X. But ill try and help as much as i can... ive
    installed on XP before so maybe ill have something of value to
    offer.
    Do you have windows firewall or any other firewall running?
    Are you sure its actually running on port 8500 as opposed to
    8000,8100, 8001?

  • How to fix ipad error -1004 "could not connect to the server"

    I am trying to access the tablet edition of Vanity Fair. I already have a subscription and when I click on the "Tap here for acces to the tablet edition" it takes me to a screen & this error message pops up:
    Cannot Open Page
    This page cannot be opended because of an error
    This error is "Could not connect to the server."(-1004).
    I have deleted, reinstalled via itunes on my mac, done a hard restart and nothing seems to be working. I can browse the web using safari and am connected to the internet via wifi.
    Any suggestions?

    I have the same issue, too. My New Yorker subscription is fine, always has been. But my Conde Nast Traveler subscription won't work. I can get to the screen where you enter your information (either with name and address or subscription number and zip code), but once I press Continue I get the error.
    I emailed Conde Nast's customer service, and this is what they said:
    Dear Subscriber:
    Please accept our sincere apologies for the inconvenience you have
    experienced.
    We have applied a fix to the app for the server error and you will need
    to close and re-open your app. To do so, please double click the "home"
    button to close the running app and then re-open your app.
    Please let us know if you still experience any problems.
    If you should need further assistance, please be sure to include all
    previous e-mail correspondence.
    Thank you for your interest in Conde Nast Traveler.
    Sincerely,
    Shar
    That didn't work. I tried the restarting the iPad, as someone here suggested, but that didn't work, either. Interesting that this seems to be a Conde Nast issue - my NY Times and National Geographic subscriptions are just fine, too.
    I'm afraid I'm not sure what the guidance in this knowledge base article means: "Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software." How does one do that on one's iPad?
    I actually wonder if it's a firewall issue. Are any of you attempting to enter this information at work, for example? I am, and my company has a firewall/proxy that gives me issues sometimes. I'm going to try to find a wifi hotspot at lunch to see if it'll work there.

  • Could not connect to SQL Server 2012 Remotely

    Hello, 
    I have a situation as follows:
    The Server
    SQL Server 2012 Standard Edition installed on Windows Server 2012 Standard Edition
    Active Directory is installed on the same server as well
    Remote Access Role added and configured to connect VPN 
    DNS Role added
    Windows Firewall is disabled
    The Server is connected to the internet 
    SQL Server Service & SQL Browser both are running under domain accounts
    SQL Server allows remote connections
    The Router
    The router that connects the server to the Internet is configured to:
    Enable VPN Tunnels Protocols (PPTP, L2TP and IPSec)
    Forwarding > Virtual Servers (all requests on TCP and UDP on all ports to the server local IP)
    The Client
    PC running Windows 7 SP1 with SQL Server 2012 Express 
    Joined AD on the server
    Connected to the internet
    VPN Connected to the Server
    Can Remote Desktop the Server
    Can ping the server host name
    Can nslookup the server host name
    The Problem
    If Both the Server and the Client are connected in the same Local Area Network, Client can connect to the SQL Serve
    Once the Client is placed in different location connected to the Interent, VPN connected as described above, I could not connect to the Server using:
    Windows Authentication Domain Users or
    SQL Server users
    and the error message is:
    Cannot connect to SERVER\SQLINSTANCE.
    ADDITIONAL INFORMATION:
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
    Any thoughts
    Thanks in advance
     

    Hello Hilary,
    I have been working on a small replication test.
    On the Publisher, things went smooth and the Snapshot Agent was able to work and produce a snapshot written in a shared folder located on the Publisher
    On the Subscriber, as I am testing from SQL Server Express, I had run the following command:
    replmerg.exe -Publisher [SERVER\SQLInstance] -PublisherDB [dbRepl] -PublisherSecurityMode 0 -PublisherLogin rplMergeAgent -PublisherPassword p@ssw0rd -Publication [TEST Publication] -Distributor [SERVER\SQLInstance] -DistributorSecurityMode 0 -DistributorLogin
    rplMergeAgent -DistributorPassword p@ssw0rd -Subscriber [SUBSCRIBER\SQLInstance] -SubscriberSecurityMode 0 -SubscriberLogin rplMergeAgent -SubscriberPassword p@ssw0rd -SubscriberDB [dbRepl] -SubscriptionType 1 -OutputVerboseLevel 2 -Output C:\TEMP\mergeagent.log 
    Where 
    SERVER
    Publisher and Distributor
    dbRepl
    Database to replicate
    Merge Agent
    rplMergeAgent
    Subscriber
    SUBSCRIBER
    dbRepl
    Subscriber Database
    Merge Agent
    rplMergeAgent
    Password
    p@ssw0rd
    rplMergeAgent
    SQL Login defined in both Publisher and Subscriber with same password
    Granted the following at Publisher:
    Login to Publication Database (dbRepl)
    Login to Distribution Database (distribution)
    Member of PAL
    Granted the following at Subscriber:
    db_owner fixed database role in Subscription database (dbRepl)
    I couldn't grant rplMergeAgent Read Permission on SnapshotFolder as it is only a SQL Login.
    When I ran the above command line, I received the following error:
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    I am pasting below the whole log file written by the above command:
    2014-04-11 15:38:07.205 Microsoft SQL Server Merge Agent 11.0.2218.0
    2014-04-11 15:38:07.342 Copyright (c) 2008 Microsoft Corporation
    2014-04-11 15:38:07.389 
    2014-04-11 15:38:07.406 The timestamps prepended to the output lines are expressed in terms of UTC time.
    2014-04-11 15:38:07.433 User-specified agent parameter values:
    -Publisher SERVER\SQLInstance
    -PublisherDB dbRepl
    -PublisherSecurityMode 0
    -PublisherLogin rplMergeAgent
    -PublisherPassword **********
    -Publication TEST Publication
    -Distributor SERVER\SQLInstance
    -DistributorSecurityMode 0
    -DistributorLogin rplMergeAgent
    -DistributorPassword **********
    -Subscriber SUBSCRIBER\SQLInstance
    -SubscriberSecurityMode 0
    -SubscriberLogin rplMergeAgent
    -SubscriberPassword **********
    -SubscriberDB dbRepl
    -SubscriptionType 1
    -OutputVerboseLevel 2
    -Output C:\TEMP\mergeagent.log
    2014-04-11 15:38:07.497 Percent Complete: 0
    2014-04-11 15:38:07.517 Connecting to Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:38:07.518 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:07.608 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:07.613 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:07.617 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select
    collationproperty(@collation, N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) &
    0x1 = 0x1 then 0 else 1 end as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:07.637 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {?=call sp_helpsubscription_properties (N'SERVER\SQLInstance', N'dbRepl', N'TEST Publication')}
    2014-04-11 15:38:07.681 Distributor security mode: 0, login name: rplMergeAgent, password: ********.
    2014-04-11 15:38:07.682 Percent Complete: 0
    2014-04-11 15:38:07.683 Connecting to Distributor 'SERVER\SQLInstance'
    2014-04-11 15:38:07.684 Connecting to OLE DB Distributor at datasource: 'SERVER\SQLInstance', location: '', catalog: '', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:25.062 OLE DB Distributor: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: 
    user name: guest
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:28.887 OLE DB Distributor 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:29.842 OLE DB Distributor 'SERVER\SQLInstance': {call sp_helpdistpublisher (N'SERVER\SQLInstance') }
    2014-04-11 15:38:32.198 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:38:33.199 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_merge_agentid (0,N'dbRepl',N'TEST Publication',null,N'dbRepl',100,N'SUBSCRIBER\SQLInstance')}
    2014-04-11 15:38:34.451 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:34.560 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_profile (23, 4, N'')}
    2014-04-11 15:38:36.189 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:36.499 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_get_redirected_publisher(N'SERVER\SQLInstance',N'dbRepl',0)}
    2014-04-11 15:38:37.396 Percent Complete: 0
    2014-04-11 15:38:37.396 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.399 Initializing
    2014-04-11 15:38:37.401 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.403 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:38.427 Percent Complete: 0
    2014-04-11 15:38:38.428 Validating publisher
    2014-04-11 15:38:38.429 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:39.455 Percent Complete: 0
    2014-04-11 15:38:39.456 Connecting to Publisher 'SERVER\SQLInstance'
    2014-04-11 15:38:39.457 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:46.548 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:50.282 OLE DB Publisher 'SERVER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
    N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
    as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:57.393 OLE DB Publisher 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:59.236 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:39:07.271 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:39:45.229 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.234 Percent Complete: 0
    2014-04-11 15:39:45.235 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.236 Retrieving publication information
    2014-04-11 15:39:45.238 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:46.287 Percent Complete: 0
    2014-04-11 15:39:46.288 Retrieving subscription information.
    2014-04-11 15:39:46.290 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.472 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.478 Percent Complete: 0
    2014-04-11 15:40:00.479 Applying the snapshot to the Subscriber
    2014-04-11 15:40:00.480 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:02.535 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:40:03.559 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_mergesubentry_indistdb (0,N'SERVER\SQLInstance',N'dbRepl',N'TEST Publication',N'SUBSCRIBER\SQLInstance',N'dbRepl',1,1,0,N'',?,90)}
    2014-04-11 15:40:04.600 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:40:04.609 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:04.611 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:07.454 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSacquiresnapshotdeliverysessionlock
    2014-04-11 15:40:07.526 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MStrypurgingoldsnapshotdeliveryprogress
    2014-04-11 15:40:07.530 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSissnapshotitemapplied @snapshot_session_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\', @snapshot_progress_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST
    PUBLICATION\20140411082109\Person_2.sch'
    2014-04-11 15:40:24.659 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSreleasesnapshotdeliverysessionlock
    2014-04-11 15:40:24.663 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.665 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:24.690 Percent Complete: 18
    2014-04-11 15:40:24.692 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.693 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:27.541 Percent Complete: 0
    2014-04-11 15:40:27.542 Category:NULL
    Source:  Merge Replication Provider
    Number:  -2147201001
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:28.563 Percent Complete: 0
    2014-04-11 15:40:28.565 Category:AGENT
    Source:  SUBSCRIBER\SQLInstance
    Number:  0
    Message: The process could not read file '\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\Person_2.sch' due to OS error 1326.
    2014-04-11 15:40:28.566 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.568 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.569 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.570 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.571 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.573 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.575 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.577 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.578 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    2014-04-11 15:40:28.579 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    I can say it is about how can the rplMergeAgent read the Shared folder.
    What do you think?

Maybe you are looking for