Could not find any import/export licenses
Hi,
I have configured License determination for Export in my GTS system. I have created license type ENC and a license of this license type. But, When i send a docuement to GTS,it fails to find license for this license type. Below are the screenshots:
Please let me know if I have missed any configuration or there is a problem in License determination procedure.
Regards,
Madhav
Hi Madhav,
Do you really need both the license types to be checked and determined for the legal regulation?
If yes, please activate "Check Multiple License Types" under control settings for Legal control.
Once this is done, you will have to assign authorities in the license type. Authorities can be managed via Customs code lists.
I had bookmarked a previous thread where similar discussion happened and Mike Wells had put in step wise details for this. Just sharing the link. Please check this and try,
Triggering multiple license types within a single legal regulation
Thanks
Dhilipan
Similar Messages
-
I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again" when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
Anyone?
ThanksHi Stan.
I had the same problem as you did though I am using Adobe CC. I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version.
Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup ) first and updated my NVidea card to no avail. Eventually what did the trick was this...
After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it. Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again. I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care. That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
Let me know if this works.
Cheers and good luck -
Could not find any available Global Catalog in forest when running RemoteMailbox cmdlet
My current Exchange environment is a hybrid configuration of Office 365, Exchange 2013 hybrid, and Exchange 2007 on-premise.
I have a script responsible for enabling remote mailboxes and assigning O365 licenses to a list of users; essentially provisioning users an O365 mailbox. This script runs every hour through a defined scheduled task in the Task Scheduler.
The script is proven to work but will intermittently throw an error on some days: "Could not find any available Global Catalog in forest root.xyz.com"
Here are the nuances of the error when it does occur:
It will only throw the error when the script is run via scheduled task - the script will work fine if executed from the command line
The error occurs when "Enable-RemoteMailbox" or "Get-RemoteMailbox" is called.
The same error will occur with ANY script that calls "Enable-RemoteMailbox" or "Get-RemoteMailbox" and is ran via scheduled task - even when the RemoteMailbox cmdlet was the only line in the script
Here is the output and error when Get-RemoteMailbox -verbose is ran:
VERBOSE: [15:49:52.474 GMT] Get-RemoteMailbox : Active Directory session
settings for 'Get-RemoteMailbox' are: View Entire Forest: 'True',
VERBOSE: [15:49:52.489 GMT]
Get-RemoteMailbox : Runspace context: Executing
user: ,
Executing user organization: ,
Current organization: ,
RBAC-enabled:Disabled.
VERBOSE: [15:49:52.489 GMT] Get-RemoteMailbox : Beginning processing
VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Current ScopeSet is: {
Recipient Read Scope: {{, }},
Recipient Write Scopes: {{, }}, Configuration Read Scope: {{, }},
Configuration Write Scope(s): {{, }, },
Exclusive Recipient Scope(s): {},
Exclusive Configuration Scope(s): {} }
VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Resolved current organization: .
VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Searching objects "abose" of type "ADUser" under the root "$null".
VERBOSE: [15:49:52.536 GMT] Get-RemoteMailbox : Previous operation run on global catalog server 'evw-xyzdc-p02.ad.xyz.com'.
Get-RemoteMailbox : Could not find any available Global Catalog in forest root.xyz.com.
At C:\IDM_In\Scripts\MinimalTest.ps1:42 char:14
+ $abose = Get-RemoteMailbox 'abose' -verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-RemoteMailbox], ADTransientException
+ FullyQualifiedErrorId : E421EF0B,Microsoft.Exchange.Management.RecipientTasks.GetRemoteMailbox
VERBOSE: [15:49:52.567 GMT] Get-RemoteMailbox : Ending processing
What could be the cause of this intermittent error?
Thanks for any helplooks to me permission error as when you are running it via a schedule task is is not able to call exchange shell/ commands {confirm this} where as when you running this manually looks to me you open exchange shell, may be as admin also and then running
the script.
schedule task process is not able to get the permission..
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin -
I am attempting to update from iMovie 9 to iMovie 10. I have many movies with iMovie 9. Yet, on iMovie 10, when I press "update projects and events", it states "iMovie could not find any projects or events to update". Somehow it doesnt' see all the movies I have on iMovie 9 library. What do I do?
I'm dealing with this same issue. At one point, it did recognize the Update function but then said it could not import the cache.mov and plist files which apparently means that imovie 10 can't see any of these past events. I can't figure it out.
-
Could not find any content hosted eligible apps
Hi....
my X-code version is 5.0, IOS version is 7.0
I created test user and test products in in app purchase option under my application in itunes connect. I want to display content for each test products when user buy my free products. For displaying content i followed the below process:
Creating App Store Hosted Content:
In order to have the App Store host your content, the content must first be put in a package.
Notes:
Before starting the steps below, login to iTunes Connect, create a "Free Subscription" in-app purchase, and select "Yes" for
"Hosting Content with Apple" for that purchase.
Creating Xcode In-App Purchase Content projects :
1).Created a .txt file and .jpeg file
2).Start by selecting File > New Project from the menu, and choosing In-App Purchase Content:
3).Enter the Product Name and Company Identifier such that the Bundle Identifier matches the Product ID you entered in iTunes Connect for this product.
4).Now you will have a blank In-App Purchase Content project. You can right-click and Add Files... or drag them into the Project Navigator. Ensure that the ContentVersion is correct (it should start at 1.0, but if you later choose to update your content, remember to increment it).
This window shows Xcode with the content files included in the project and the plist entries visible in the main window:
5).Once you have added all your content files you can save this project and edit it again later, or begin the upload process.
Uploading .PKG Files :
6).The easiest way to upload content packages is with the Xcode Archive Tool. Choose Product > Archive from the menu to begin:
The content package will then appear in the archive in new window. Notice the archive type and icon show this is an In-App Purchase Content Archive. Click Validate... to check our content package for errors without actually preforming the upload.
7).Login with your iTunes Connect credentials:
At step 7 when i go for validate the archive I'm getting the below error
"Could not find any content hosted eligible apps"
Please guide me why am getting the above errorYou are better of asking questions like this in the developer forums : https://devforums.apple.com/index.jspa
-
Could not find any capable video play modules upon startup.
After installing Premier Pro CC, I received this error message (also pictured below): "ADOBE PREMIER PRO STARTUP ERROR. Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again."
And here is an Adobe help page that offers four solutions to this issues, Error "Premiere Pro could not find any capable video play modules" | Startup. But I'll be honest, I feel like I need my hand held through solutions 2-4. I know nothing about video adapter drives, AMD Radeon cards or BIOS setup.
Could someone here expand upon these solutions for me? It would be much appreciated.
FWIW, I'm on a MacBook Pro, OS X 10.9.4, 2.6 GHz Intel Core i5 processor, 8 GB 1600 MHz DDR3 memory, and Intel Iris graphics.
Thanks
HarrySo according to Apple, Premiere Pro simply cannot run on my laptop. It does not have and never will have a "Adobe-certified GPU card for GPU-accelerated performance".
Adobe, is this true? -
The system could not find any entries that are relevant to costing.
plz give the solution ,its urgent
Message no. CK060
Diagnosis
The system could not find any entries that are relevant to costing.
System Response
The system did not cost the object.
Procedure
Check whether the following objects should be flagged as relevant to costing:
Items in the BOM
Display BOM
Operations in the routing
Control key in the routing
1. Look at the message log.
2. Check whether a quantity was specified in the confirmation.hi,
iam facing the problem while creating the
stnadard cost estimate ck11n
the system prompts the following message
confirmation
Logistics - General (LO)
Information from the vendor to the recipient about the status of the purchase order.
The term confirmation covers different types of information from the vendor to the customer, such as order, loading or transportation confirmation and the shipping notification.
If materials planning takes place without a confirmation, planning can only be based on the delivery dates and quantities in the purchase order. In contrast, confirmations make it possible for the customer to plan the materials more precisely because between the purchase order and planned delivery date, more reliable information has become available.
Logistics - General (LO)
Communication sent by a vendor to a customer regarding the status of a purchase order.
The term "confirmation" (short for "vendor confirmation") is an umbrella term for various types of information provided by a vendor to a customer, including order acknowledgments, loading or transport confirmations and shipping notifications.
If the customer's materials planning and inventory control system does not work with confirmations, it can only refer to the delivery dates and quantities set out in the purchase order. The use of confirmations, on the other hand, makes the materials planning and inventory control process more precise, since between the PO date and the planned delivery date the customer receives increasingly reliable information about the pending arrival of ordered goods.
Treasury Management (TR-TM)
After concluding a financial transaction, a confirmation of the related contract data is sent to the relevant business partner. Confirmations can be printed or sent electronically directly from the R/3 System. Confirmation forms are defined via the correspondence type.
Logistics - General (LO)
Part of order monitoring, this documents the processing status of operations or sub-operations. In the SAP System, a distinction is made between partial and final confirmations.
A final confirmation is used to determine
at which work center the operation should be carried out
who has carried out the operation
the quantities of yield and scrap quantities that have been produced
the size of the standard values required for the actual operation
Materials Management (MM)
Communication from a vendor to a customer providing information on the status of a purchase order.
As used in this sense, the term "confirmation" can cover a number of different documents, such as order acknowledgment, loading confirmation, or shipping notification. Also termed "order acceptance/fulfillment confirmation".
If the materials planning and control system operates without such confirmations, it can only work on the basis of the delivery dates and quantities in the purchase order. Confirmations, on the other hand, enable the customer to plan more exactly. In the period between the issue of the PO and the planned delivery date he is provided with more up-to-date and increasingly reliable information on the expected delivery.
Project System (PS)
A confirmation is a part of network control. It documents the state of processing for network activities and activity elements. There are two types of confirmations in the R/3 System: partial and final confirmations.
A confirmation is used to record:
the work center where the activity was carried out
the person who carried out the activity
the yield and scrap produced in an activity
the actual values for the standard times
Intellectual Property Management (CRM-IM-IPM)
A report made by the licensee and defined in the rights sale contract on sales volumes or other quantities (such as audience figures for a film) during a period.
Receiving (ECO-BBP-REC)
An electronic document that combines the functions of goods receipts and service entry sheets. By creating a confirmation:
Vendors can confirm that they have fulfilled their orders
Employees can confirm the goods and services they ordered via their shopping baskets
Central goods recipients can confirm the goods and services ordered by employees for whom they are responsibleconfirmation
Logistics - General (LO)
Information from the vendor to the recipient about the status of the purchase order.
The term confirmation covers different types of information from the vendor to the customer, such as order, loading or transportation confirmation and the shipping notification.
If materials planning takes place without a confirmation, planning can only be based on the delivery dates and quantities in the purchase order. In contrast, confirmations make it possible for the customer to plan the materials more precisely because between the purchase order and planned delivery date, more reliable information has become available.
Logistics - General (LO)
Communication sent by a vendor to a customer regarding the status of a purchase order.
The term "confirmation" (short for "vendor confirmation") is an umbrella term for various types of information provided by a vendor to a customer, including order acknowledgments, loading or transport confirmations and shipping notifications.
If the customer's materials planning and inventory control system does not work with confirmations, it can only refer to the delivery dates and quantities set out in the purchase order. The use of confirmations, on the other hand, makes the materials planning and inventory control process more precise, since between the PO date and the planned delivery date the customer receives increasingly reliable information about the pending arrival of ordered goods.
Treasury Management (TR-TM)
After concluding a financial transaction, a confirmation of the related contract data is sent to the relevant business partner. Confirmations can be printed or sent electronically directly from the R/3 System. Confirmation forms are defined via the correspondence type.
Logistics - General (LO)
Part of order monitoring, this documents the processing status of operations or sub-operations. In the SAP System, a distinction is made between partial and final confirmations.
A final confirmation is used to determine
at which work center the operation should be carried out
who has carried out the operation
the quantities of yield and scrap quantities that have been produced
the size of the standard values required for the actual operation
Materials Management (MM)
Communication from a vendor to a customer providing information on the status of a purchase order.
As used in this sense, the term "confirmation" can cover a number of different documents, such as order acknowledgment, loading confirmation, or shipping notification. Also termed "order acceptance/fulfillment confirmation".
If the materials planning and control system operates without such confirmations, it can only work on the basis of the delivery dates and quantities in the purchase order. Confirmations, on the other hand, enable the customer to plan more exactly. In the period between the issue of the PO and the planned delivery date he is provided with more up-to-date and increasingly reliable information on the expected delivery.
Project System (PS)
A confirmation is a part of network control. It documents the state of processing for network activities and activity elements. There are two types of confirmations in the R/3 System: partial and final confirmations.
A confirmation is used to record:
the work center where the activity was carried out
the person who carried out the activity
the yield and scrap produced in an activity
the actual values for the standard times
Intellectual Property Management (CRM-IM-IPM)
A report made by the licensee and defined in the rights sale contract on sales volumes or other quantities (such as audience figures for a film) during a period.
Receiving (ECO-BBP-REC)
An electronic document that combines the functions of goods receipts and service entry sheets. By creating a confirmation:
Vendors can confirm that they have fulfilled their orders
Employees can confirm the goods and services they ordered via their shopping baskets
Central goods recipients can confirm the goods and services ordered by employees for whom they are responsible -
I have a late 2013 MacBook Pro Retina with NVIDIA GeForce GT 750M 2048 MB.
Ever since the Premiere CC 2014 update, on launch, I get this error right after it shows "ExporterQuickTimeHost.bundle" loading (I tried removing this, but it still did it, so I don't think it has anything to do with the QuickTime plugin):
Adobe Premiere Pro Startup Error
Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.
I never got this in the CC version. I have the latest CUDA driver: version 6.0.46 & GPU Driver: version 8.26.21 310.40.35f08
The computer is unusable for about 4-5 mins after this happens until it all clears up. This whole process takes up 7-8 mins!
This same thing also happens with Prelude CC 2014.
If anyone knows what's going on I would be very grateful.
Thanks, MazI found a solution that worked for me. Seems to be a permissions problem. Here's the solution I found (found it here: CC 2014 startup issues : Adobe Premiere Pro):
In the finder menu click and hold on the GO menu. Hold the option button and the User library will show up. Click the User Library.
In that folder go to preferences and find the adobe folder.
Right click on adobe folder and click get info.
In the Sharing & Permissions section there should be three names.
All should say Read & Write next to them.
Unlock the lock, switch them all to read and write.
Then click on the little gear directly under the names or to to the left of the lock and in the pulldown click on "apply to enclosed items.
Then lock the lock again.
Now go to your OS Hardrive and click on Users, your user name, Documents.
Find the adobe folder there.
Right click on adobe folder and click get info.
In the Sharing & Permissions section there should be three names.
All should say Read & Write next to them.
Unlock the lock, switch them all to read and write.
Then click on the little gear directly under the names or to to the left of the lock and in the pulldown click on "apply to enclosed items.
The lock the lock again.
Wait 1 minute. Then launch Premiere.
This fixed it for me. -
I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay -
Premiere CC/Nvidia Card - could not find any capable video play modules
I just purchased a new Toshiba x75 Qosmio laptop with an Intel HD Graphics 4600 and Nvidia 770M graphics card.
Specs:
Windows 8.1 x64
Intel i7-4700MQ 2.4Ghz
16GB Ram
2 500GB @ SATA 7200RPM
I have CS5 and wanted to use Premiere CC. Downloaded PPCC from Cloud and opened a few projects made on CS5 a couple time s. Had to add card to notebook for the better faster CUDA card to be recognized and all was fine. a few restarts later I recieved an error "Could not find any capable video play modules" and haven't been able to open PPCC since. It stops on Vignette.aex.
Opening Premiere CC was obviously using the intel card, which I I wanted to use the Nvidia so I assigned the better 3GB memory card to PPCC. I was able to open it a few times after.
I've tried:
Uninstalled and installed PP CC several times.
Uninstalled and installed Nvidia 770M driver several times. updated 770M driver several times.
changed "use as Administrator"
adding GeForce GTX 770Mcards" this had to be done to AFX and other programs. It was even recognized in Premiere while I could still open the program (before error started)
tried changing "Compatability" to different previous versions of Windows (found some fixes on adobe threads)
clearing "Profile-username" in "Documents/Adobe/PremierPro/Profile"
I have read all over Adobe forums, searched google and you tube, and this is a problem that's ongoing. I have not been able to find a definate answer from adobe or anyone else. Seems people are just throwing ideas out there and some work and some never get their issue resolve and give up. This does not help me resolve the issue and I need a list of To Do's that will help me resolve this issue right away, Please.>Intel HD Graphics 4600 and Nvidia 770M
Dual video problems
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2 -
Server could not find any Meta-Data devices!
Our MDC dropped out and the backups did not engage.
On a reboot of the MDC we were able to mount the volume, but all files (QuickTme movies, FCP projct files) could not be opened with an "unknown file type error".
We shut all the clients down we checked the volume and (cvfsck -nv) and while "dirty" it did not report any errors.
Stopped the volume and ran a cvfsck -w which gave us:
"Server could not find any Meta-Data devices!"
Checking Xsan admin logs shows us:
"PioOpen: no such device.
Fatal: Cannot open stripe group "md" - Operation not supported by device
Fatal: Physio_init failed."
Where "md" is our metadata storage pool.
We shutdown all switches, RAIDS, clients, etc, but bring them all back up and checking with one MDC or another is the same result. Volume will not mount.
All fiber connections seem good, checked in RAID admin and on switch.
Ideas?AppleCare suggested that maybe a metadata backup could have helped.
http://docs.info.apple.com/article.html?artnum=303371
In any case, we nuked and paved. -
"could not find any capable video play modules" on Premiere Pro CC 2014
Hello
I am just recently subscribed to Creative Cloud.
After I download Premiere Pro CC, I got a start-up error "could not find any capable video play modules" while there is no problem with After Effect CC and SpeedGrade CC
For the first few time, I did successfully launch Premiere Pro CC by launching SpeedGrade first
However it doesn’t work now. In the meantime, Photoshop CC, Lightroom CC also work fine.
My situation is very similar to https://forums.adobe.com/thread/1420782
The start-up error pops-up when the launching process is stuck at “ImporterQuickTime.prm”
I am really disappointed as I finally joined CC for Premium Pro but it fails to launch.
I have spent days searching on Google for solution, of course I did see the Adobe FAQ at https://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html but none of them works to me.
So far I have tried
erasing the Temp files of my PC
updating my graphic card’s driver to the latest version,
reinstalling Premiere Pro CC
But it is still not working at all.
Here’s the spec of my PC:
Motherboard: AsRock Extreme4 970
CPU: AMD Phenom II X6 1090T
Graphic Card: MSI N670GTX Power Edition (nVIDIA GTX 670)
RAM: 12GB DDR3
OS: Windows 7 64bit Home Premium
Interestingly, Premiere Pro CC works without any error on my Acer V5-571G laptop with Win8.1 64 bit.
But the performance is unacceptably low during editing so I’m still hoping to use Premiere Pro on my desktop instead.
Can anyone help me.?http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
What is the screen size, in pixels x pixels of your laptop?
Did you read the computer requirements before trying to run PPro? -
in imovie 10.0.1 while trying to update projects and events i get a box telling me that imovie could not find any projects or events to update. Help, please.
Do you have Projects and Events form an earlier version of iMovie?
Matt -
Data selection procedure 400 could not find any data
Hi ,
I am getting the Information message "Data selection procedure 400 could not find any data " while doing the Result recording of a inspection lot
Inspection lot status :- REL CALC
Inspection lot Origin :- 04 GR from production order
No user status active
This message i am getting in some inspection lot only
Kindly help me to understand the possible resaon for this message
Thanks,
Ishwarhi,
u r using any copy inspection result like of thing, if not than please provide the Mssg number. and possible than check ur plan properly.
F9 i have checked, this prblm occurs when u using the Copy inspecttion result during RR in QA32, ma suggesstion is to checck ur config "Copy inspection results" in SPRO properly against inspection type "04", and than check ur qaulity plan, than execute it will resolve.
For more information:
SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
Regards
Edited by: D GURU on Dec 5, 2011 8:35 AM -
Unhandled Exception "Could not find any available Domain Controller"
Hi,
I keep on having exchange 2010 loosing contact to domain controllers.
"Unhandled Exception "Could not find any available Domain Controller.". EventID 1. Once I restart the sever, this error disappear and reappear again after a few days.
When I run AD setting, the result shows as below. Update version is currently as at 14.02.0342.003. And boths DCs have 100% uptime.
PS C:\> Get-ADServerSettings | fl
RunspaceId
: 9392eb25-bcdc-462e-816b-2d5626c572a5
DefaultGlobalCatalog
: DC2.com.au
PreferredDomainControllerForDomain
DefaultConfigurationDomainController
: dc1.com.au
DefaultPreferredDomainControllers
: {DC2.com.au}
UserPreferredGlobalCatalog
UserPreferredConfigurationDomainController :
UserPreferredDomainControllers
RecipientViewRoot
ViewEntireForest
: True
WriteOriginatingChangeTimestamp
: False
WriteShadowProperties
: False
Identity
IsValid
: True
Could you please help as this exchange server has our management team and their outlook keep on going offline.
Thanking you in advance.
Cheers,
PwintI have another issue. I was trouble shooting exchange bin folder for permission and as a result of it Exchange transport service stopped and couldn't restart. I quickly changed to local service account and able to restart. Fixed the transport roles folder
permission but don't know the password of network service account so I can't change it back. I can send and receive emails internally and externally but I am worried that by running with local account maybe not recommended? Is it safe to reset network service
password? Thanks. I am freaking out... Regards, Pwint
Maybe you are looking for
-
How can i remove password from my I Pod
how can i remove password from my I Pod
-
Triggers to Update rows in the same table
Hi, I have a table called as "Cal" which has the following fields CALID Description RecurringID There will be many records with the same recurring id and If the Description field is Updated, then I would like to Update the same description to all the
-
How to install Chinese fonts on my application server
Hi Experts, We are facing an issue in which the Adobe services PDF couldn't able to recognize chinese characters So, we want to install chinese fonts CNSONG,CNHEI etc on our application server (which is ABAP only system) Can any one share me the step
-
How to undeploy using telnet Adminstrator Tool in j2ee server
HI All, I have a problem in undeployment throw Telnet Adminstrator Tool,can any one tell how to undeploy using shell script? Regads, Boopathi M
-
Dual Language Data upload using SQL*Loader
I have to load data consisting of English and Traditional Chinese characters into 8.1.5 from external files. These external files are in MS Excel. Is there any way that I can user SQL*Loader for this ? If yes, how ? If not, is there any other way out