Could not find code page for receiving system

Hi Experts,
When I scheduled a PC i got this Error Msg. What is the real cause and how can i correct it?? Thanks
Dave
"Could not find code page for receiving system"

Hi Praveen,
The detailed error msg says the following.
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Business Information Warehouse . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive.

Similar Messages

Infopackage Idocs in status 2 - could not find code page for receiver system

Hi,
We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
We did not encounter this issues on our previous migration test runs..
Hope someone can help
Christophe

Hi,
Thanks for responding. We finally found out what the problem was.
We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
Regards
Christophe

IDoc Status 02 ( Could not find code page for receiving system )

Hi All,
I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
Error description.
Could not find code page for receiving system
Message no. E0266
Diagnosis
For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Procedure for System Administration
Possible causes are:
1. The entry no longer exists in the table of logical destinations.
2. The target system could not be accessed at runtime.
3. The logon language is not installed in the target system.
4. In the destination system, no logon language is maintained
Please help.
Thanks - Vinay.

Hi Vinay,
Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination is working fine and your able to connect to target system and also check correct port is assigned.
Regards,
Vinod.

Idoc Error: Could not find code page for receiving system

hi,
I am facing the following error while processing Idocs.
ERROR: Could not find code page for receiving system
Diagnosis
For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

Hi,
I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
If this helps you really award me the points.
~Katty

Idoc failed in Bi system "Could not find code page for receiving system".

Dear Experts,
i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
All the idocs have been successfully posted except one which is giving this error
Idoc status 02 - could not find code page for receiver system.
Please guide me
thanks
vamsi

Hello Vamsi,
check Note 647495 - RFC for Unicode ./. non-Unicode Connections
If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
Please check this thread - IDoc error - Could not find code page for receiving system
Hope it helps,
Thanks & Regards,
Amit Barnawal

BW Monitor error Could not find code page for receiving system

Hi All,
Frequent BW Monitor error - Could not find code page for receiving system
I checked SM59 and every setting is fine there. Any other possibility ?
Regards
Srinivas

The log updated in the status tab was:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.

Error "could not find code page for receiving system"

Hello Everyone,
We are trying to load data and receive the message:
Could not find code page for receiving system
We have searched notes and this forum and can't find anything. We also checked WE20 and could not find anything wrong.
Can someone please elaborate specifically what this error is and where to fix it?
Thanks so much.
Colleen

I just upgraded to NW 2004 SR1, and when loading data from a non-unicoded R/3 system to our BW unicoded system I experienced the exact problem. Here is the resolution that is stated in note #613389 (it's not very clear in the note).
- Language EN must be specified in sm59
- Under Special Options -> RFC Bit Options
Make sure that Use Found Communication Code Page has a check mark.
Once this was done, the data loads started completing successfully.

Could not find coding page for receiving system

Hi,
We have set up the configuration of RFC connections in SM59. We want to send an IDoc from a Unicode to a non-Unicode system. Message 'Could not find coding page for receiving system' appears. We activated some solutions described in OSS notes and added the required authorization to the communication user but it still doesn't work. What else can cause (solve) this problem?
Regards, Jan

Hello Jan,
I had the following situation:
After seup of an ALE/IDOC scenario with another SAP but Non unicode system sometimes the outbound PROJECT idocs failed with the error message "Could not find code page for receiving system". Status of Idoc was 02. When reprocessed some minutes later with report RBDAGAIN it worked.
It turned out that for what'o'ever reason the connectivity was down for a very short time but long enough to get the Idocs failed.
That's what I meant with the error text could be misleading.
We solved this problem with a daily job with report RBDAGAIN for reprocessing.
Regards
Michael

Could not determine code page Error in remote sys in XI

Hi,
When we try to send some IDOCS from ECC 5.0 sys to 4.6C sys via XI (M70) we are encountering below issue.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with XXXXX system I::000 FM NLS_GET_LANGU_CP_TAB</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: FM NLS_GET_LANGU_CP_TAB: Could not determine code page with XXXX I::000 FM NLS_GET_LANGU_CP_TAB</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When i checked table TCPDB is empty in 4.6 C system. Does it ring any bells guyz....
Regards
Vish

Hi,
Check out this thread
"Could not determine code page" inbound side error
XI IDOC Error...
Thanks,
Prakash
Message was edited by: Prakash Arunachalam

DB Tab RFCDES: Could not determine code page

Hello,
I have a simple scenario File->XI->IDOC(orders05)
The R/3 who receive the IDOC is an 46c system. When sending a file to the XI I receive the following error message in sxmb_moni on the last step "Call Adapter"
DB Tab RFCDES: Could not determine code page with <myr3>
Does anyone have an idea whats wrong ?
Regards Bernd

Hi Bernd,
did you have a look at SAP notes for idoc adapter code page problems? : 747322, 804570
Regards,
michal

ATTRIBUTE_IDOC_RUNTIME: Could not determine code page ... I::000

Hi guys,
well we have strange problem with code page. Scenario is IDoc2IDoc.
We receive IDoc from french-system and when IDoc comes in, we get following error:
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with E01CLNT100 I::000 FM NLS_GET_LANGU_CP_TAB</SAP:P1>
Does someone has experience with this?!
br

Can somebody help me with this?! in RFC-Dest. we thought to use MDMP but with no success.
Could it be that this depends on user-permissions of the RFC-User in target system?! What permissions are needed for this?!
br

RFC_ERROR_SYSTEM_FAILURE: Could not ascertain code page

Guys:
Here is the solution i discovered and its going to error.
PI is in windows environment.
File to RFC ( in PI itself no remote SAP ECC sytem or any system)
-Sender com channle I am using the file adapter with FCC
-Receiver I am using a RFC fucntion mdoule (FM). Remember this RFC function module to convert the file (itab and masaget he data as required and use gui_downlaod and write to PI file system)is on PI ABAP
stack and I imported the function module . I Remote-enabled button in SE37 FM in PI ABAP stack.
I did the file to RFC mapping in PI java stack.
-Receiver Comm channel I used RFC and pointed to PI system itself with the PI appserver/sysno/userid/passowrd.
In SXMB_MONI i see a checkered flag as success and failing on the receiver adapter with the error
"RFC_ERROR_SYSTEM_FAILURE: Could not ascertain code page". The xml files on inbound payload and technical routing looks good.
Please help !

Hi Kumar,
Refer the last post in the forum post Re: RFC_ERROR_SYSTEM_FAILURE and see if there is any issue due to code page as mentioned.
Regards,
Srinivas
Edited by: Srinivas on Apr 29, 2010 8:28 PM

"Could not ascertain code page" Error.

Hello,
I have created an program for getting FI docs from BSEG table and downloading into excel file after doing some processing on the fetched data. The job, if run as a dialog process, works ok. But if scheduled to run in the background, gives the following error.(viewed through SM37).
Job started
Step 001 started (program ZFI_BUSINESS_AREA, variant &0000000000003, user ID LSMW_FI)
Could not ascertain code page
Job cancelled after system exception ERROR_MESSAGE
Any help is appreciated.
Thanks.
N.K.Verma.

It is soooooooooooooooooooooooooooooooo difficult to understand:
SAP is a client-server-system. Online means that you can DOWNLOAD something from SAP server to client PC.
There is no such thing like a background client PC.
PERIOD.
-EOF-

Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17: Error: Could not find a match for std::_Tuple_impl 0, unsigned&& ::_Tuple_impl(std::tuple unsigned&& , unsigned) needed in std::tuple unsigned&& ::tuple unsigned, void (unsigned&&).

I think I downloaded the latest Solaris Studio version. When I compile my code, I got the following error:
bash-3.00$ gmake -f Makefile.sun
CC -c -o metadata.o metadata.cpp -I. -I.. -g -O0 -std=c++11 -I/export/home/oracle/zhifan/boost_1_55_0 -I/export/home/oracle/zhifan/instantclient_11_2/sdk/include -V
CC: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
ccfe: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
"metadata.cpp", line 20: Warning: db hides databus::MetadataManager::db.
"metadata.cpp", line 26: Warning: db hides databus::MetadataManager::db.
Error: Could not find a match for std::_Tuple_impl<0, unsigned&&>::_Tuple_impl(std::tuple<unsigned&&>, unsigned) needed in std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: While instantiating "std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&)".
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: Instantiated from std::forward_as_tuple<unsigned>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/bits/stl_map.h", line 485:     Where: Instantiated from non-template code.
1 Error(s) and 2 Warning(s) detected.
gmake: *** [metadata.o] Error 2
with the same code, It can be compiled with g++ on Linux platform.
1 Is the issue same as 12.4 Beta, Error: Could not find a match for std::_Tuple_impl<0, std::string &&>::_Tuple_impl(std::tuple<std::string &&> ?
2 Do we have any workaround for this issue?
3 When will the final 12.4 release be available?

I can't say for sure whether your problem is fixed in the final release without a test case, but I'd say the chances are very good.
The final release will be announced soon. Watch this space, or the Oracle Solaris Studio page for an announcement.

Using Project Settings creates an app.config and dozens of errors about "Could not find schema information for the element...

I am trying to work with Application settings. I would just like to put together a very simple example of using these, but I can't get the most basic example to work. Virtually every tag regarding the new Settings produces an Error "Could not find the schema information for the element "applicationSettings". or the element "Settings" etc. etc. I am not using IIS, this is not a Web Project, and I am not working with User Settings. Just simple read-only Application Settings. I've read every MSDN page regarding this subject, I don't see that I am missing a reference - HELP !!!
REPRODUCING THE PROBLEM:
Step 1. Create a new C# solution and Windows Forms project.
Step 2. Add a reference to System.configuration
Step 3. Right click the project, choose Properties, then Settings.
Step 4. Using the Settings Designer, create ONE setting called "MySetting" as a String with the value "MyValue".
RESULT: Observe the Errors like these, complaining about all of the Settings tags and elements.
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'LoadOriginalLists.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
HERE IS MY APP.CONFIG, AS GENERATED BY THE SETTING DESIGNER TOOL:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="LoadOriginalLists.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
</configSections>
<applicationSettings>
<LoadOriginalLists.Properties.Settings>
<setting name="MySetting" serializeAs="String">
<value>MyValue</value>
</setting>
</LoadOriginalLists.Properties.Settings>
</applicationSettings>
</configuration>

Ummmm... okay so these are Messages that are in the Error List. Whether or not they are actually Errors is debatable. They are in the Error List, so they are errors.
The application runs, so my question is slightly changed to the following.
I would like to use Application Settings. However, having settings in my app.config pollutes my Error List with a bunch of meaningless messages like "Could not find the schema information for...". These messages then hide real errors.
Am I missing some setting or is there something I can do to make Visual Studio not show me these messages?

Could not find code page for receiving system

Similar Messages

Maybe you are looking for