"Could not find the application that created this file" error when trying to combine files
I am working with a user that is trying to combine a pdf & word doc (docx). When they try to combine the files she gets the error: "Could not find the application that created this file" & "Please select a file created by an application that resides on your computer". The computer is running windows XP, with office 2010 SP1, & Adobe Acrobat Pro X.
Per previous suggestions, I have already checked to see if Adobe PDFMaker is enabled as a Word plugin, and it is.
Recentley the user was running Acrobat 6, and this error did not occur. It is only after upgrading to Acrobat X that this is happening. Any help with this issue would be appreciated.
This can also be caused if the files are in a folder deep in the file system. For example C:/xxxxxxxxxxxxxxx/yyyyyyyyyyyyyyy/zzzzzzz/aaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbb /cccccccccccccccccccc/dddddddddddddddd/eeeeeeeeeeeeeeeeeeee/ffffffff/ggggggg/hhhhhhhhhhhhh hhhhhhhhhh/myPDF.pdf
At some point Adobe PDFMaker cannot handle the path length (also, Windows can't handle the path length either eventually)
Solution: move the files to a shorther path (perhaps the desktop) and try from there.
I am filing a bug report with Adobe. A descriptive exception message should be thrown instead of "could not file the app.."
Similar Messages
-
Could Not Find The Application That Created This File
Hello Community,
I have already been to the Acrobat forum with this post and they re-directed me to this forum.
My problem seems to be with a InDesign file that will not export to a PDF, nor can I create the PDF from within Acrobat itself. BTW I have Acrobat 8.1.6 on a Vista OS.
Here is what I've done thus far:
restarted my computer, which didn't correct anything
printed the InDesign file to the PDF printer unsuccessfully
Checked for InDesign and Acrobat updates and found I'm current with the updates
Please NOTE: I have no problem with creating a PDF with either a Word or Illustrator file; it's the InDesign file that's giving me a problem. The message I get when I try to export from within InDesign to a PDF file is "Could not find the application that created this file; please select a file created by an application that resides on your computer."
Please help. Thank you very much.Hi John,
Before replying to you, I decided to give it another go. This time out, I
was finally able to export the InDesign file, which I created, to a PDF.
Hooray!
I have found, in the past, that restarting my computer will clear something
in my system, and then I can create the PDF. Sometimes this inability to
create a PDF happens in Word. But this time around it was InDesign that was
the problem file.
Maybe it has something to do with the preferences menu. I'll have to check
this out. Otherwise, all is fine. Thanks for answering.--Pat -
Could not find the application that created this file Acrobat Pro XI and .pptx file
Hi,
I just installed Acrobat Pro XI and I am trying to combine files into one pdf. The combine feature works fine with Word, excel, other pdfs but does not work with powerpoint files (.pptx). I have searched and found others have been having this issues for many past versions. I found a workaround (print the powerpoint to pdf and then merge the files) but I should not have to do it that way. Can someone help me out? Powerpoint is installed on my computer, the print pdf function works, and the Adobe add-in is active (these are the 3 solution I keep encountering) but it still will not combine a powerpoint file. Any help would be greatly appreciated.
Thank You,
SteveHi Stephen ,
Could you please elaborate a bit more that what exactly happens when you try to combine .pptx file?
Do you get any error message?
If yes ,please share the screen shot of the same.
Are you facing challenge with the powerpoint files only?
I have tried the same on my end and it is working perfectly fine .
Try updating your Acrobat to the latest version .
Launch Acrobat>Navigate to Help>Check for Updates .
Regards
Sukrit Dhingra -
Hello,
I am working with Acrobat Pro 8 and am trying to create a pdf by converting a word doc. When I try that, I keep getting an error message, " Could not find the application that created this file...please select a file created by an application that resides on your computer." I can always convert a word into pdf first and then insert it into the pdf project that I am working on, however I have multiple files and I really would like to bypass that long step.
I found another thread in this forum which talks about a simillar issue (http://forums.adobe.com/thread/429585).I tried the solution suggested there by Bill@vt regarding the print menu. I am not really sure if t have distiller installed, so I tried opening it in acrobat, but it failed. During the process, I got the follwing message "Check the Status column for a list of files that could not be printed".I do not have any clue how to check for AcroTray running in the background.
I would really appreciate any help.
Thanks!If Distiller failed to open, it sounds like you need to do a repair of your Acrobat installation. Have not heard that one before!
-
I am developing a WSS based WCM site for a customer which has a bilingual interface. Now everything is wokring fine in the development environment. Today I backed-up the Content Database and took the related control file (.ascx & .ascx.cs) to deploy it to the cusomter's test machine. I dint face any problems with the deployment, and after deleted and added the Content DB from Central Administration, I was able to access the English part of the website along with my changes without any problem.
But when I tried accessing the Arbic part of the website, Its giving me the following error,
تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Roughly translated, it means "Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new."
Can you please tell me what is the cause of the problem and how to rectify it? Also do I need to
Regards,
SoniSSPIt is searching for the page, but that page is not available. Did u install the current language pack?
-
'Could not complete your request because of a program error' when trying to use an effect
Hi all,
I have looked around and cant seem to find the ansewer to my very annoying problem. When I am trying to use the effect options with in the layers pallete I get the annoying message:
' Could not complete your request because of a program error. '
Has anyone come across it using these tools and has anyone found a fix for it. It was working fine then it went funny. I have restarted photoshop, my machine and re-installed the software but stiill not fix. ITs is very annoying as I use these options everyday in the job I do.
Cheers.
JonYou might try restting the photoshop preferences:
http://forums.adobe.com/thread/375776?tstart=0 -
I am constantly told by Itunes that 107 items are not synching from my Ipod Touch to/from Outlook Contacts. I try to resolve the issue and eventually a message pops up saying it could not be completed because it could not find the sync server. This started after one of the updates a couple of months ago. If anyone has found a similar problem and resolved it I would appreciate any assistance.
ThanksTry here:
Advanced troubleshooting for Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
Sync Services: Advanced troubleshooting for contact and calendar syncing -
Execute jar file: "could not find the main class" program will terminate
Hey,
I am new to Java. I have started to make a small java program which supposed to help me at my studies to lean the Dominic Memory System. I have used the latest version of Netbeans 5.5.1 to build my program in. I have two problems which I cannot figure out how to solve, please help me.
The first problem is that the java script I have made works when I compile it in Netbeans, but when I create a Jar file it does not work. I receive a pop up message in windows ?could not find the main class program will terminate? when I execute the jar file.
The second problem I have is that I need to compare the strings generated by the "numbers" and "TIP" and if the numbers is not identical the numbers in the ?Center? JPanel should be highlighted as red.
If anyone would like to clean up the code I would be pleased. I have copied quite a lot from anyone because of my one lack of knowledge.
* GoListener.java
* Created on 12. september 2007, 21:48
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package grandmaster;
import java.awt.event.*;
import javax.swing.*;
import java.util.Vector;
import java.util.StringTokenizer;
import java.awt.Color;
* @author Computer
public class GoListener implements ActionListener {
private JTextField viewer;
private JTextField TIP;
private JTextField freq;
private JTextField max_num;
private Vector numbers;
public GoListener(JTextField j,JTextField k, JTextField m, JTextField f, Vector n) {
freq = f;
max_num = m;
viewer = j;
numbers = n;
TIP = k;
public void actionPerformed(ActionEvent e){
int time = Integer.valueOf(max_num.getText());
int f = Integer.valueOf(freq.getText());
if (e.getActionCommand() == "GO") {
for (int i = 0; i< time;++i) {
int number=0;
number = (int)Math.floor(100*Math.random());
while(number>51){
number = (int)Math.floor(100*Math.random());
if(number<=9){
viewer.setText(" "+"0" + String.valueOf(number) + " ");
} else{
viewer.setText(" " + String.valueOf(number) + " ");
viewer.paintImmediately(viewer.getBounds());
numbers.add(number);
try {
Thread.sleep(f*1000);
} catch (Exception exp) {
viewer.setText(" XX ");
viewer.paintImmediately(viewer.getBounds());
if (e.getActionCommand() == "VIEW") {
try {
//int numb = Integer.valueOf( TIP.getText() ).intValue();
StringTokenizer tokenizer = new StringTokenizer(TIP.getText(), " ");
String[] split = null;
int tokenCount = tokenizer.countTokens();
if (tokenCount > 0) {
split = new String[tokenCount];
for (int current = 0; current < tokenCount; current++) {
split[current] = tokenizer.nextToken();
viewer.setText(" " + String.valueOf(numbers) + " ");
// k=numbers(1);
/*while(c<i){
String.valueOf(k).equals(split[1]);
c++;
TIP.setText(" " + split[2] + " ");
} catch (Exception exp) {
try {
//string testit = numb.toString();
//String str = "" + numb;
//viewer.setText(str);
//viewer.setText(numbers.toString());
numbers.clear();
} catch (Exception exp) {
* Main.java
* Created on 12. september 2007, 21:07
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package grandmaster;
import java.util.Vector;
import javax.swing.*;
import java.awt.event.*;
import javax.swing.JButton;
import java.awt.*;
import grandmaster.GoListener;
* @author Computer
public class Main extends JFrame {
private JTextField viewer;
public JTextField TIP;
// private TextInputPanel TIP;
private Vector numbers;
/** Creates a new instance of Main */
public Main() {
numbers = new Vector();
JPanel p = new JPanel(new GridLayout(0,4));
JButton go = new JButton();
JButton view_num = new JButton();
go.setText("Go!");
go.setVisible(true);
go.setActionCommand("GO");
view_num.setText("VIEW");
view_num.setVisible(true);
view_num.setActionCommand("VIEW");
JTextField max_num = new JTextField();
max_num.setText("5");
JTextField freq = new JTextField();
freq.setText("1");
viewer = new JTextField();
viewer.setText("XX");
TIP = new JTextField("");
p.add(go);
p.add(max_num);
p.add(freq);
p.add(view_num);
getContentPane().add(p,BorderLayout.NORTH);
getContentPane().add(viewer,BorderLayout.CENTER);
getContentPane().add(TIP,BorderLayout.SOUTH);
setSize(200,200);
GoListener g = new GoListener(viewer,TIP,max_num, freq, numbers);
go.addActionListener(g);
view_num.addActionListener(g);
* @param args the command line arguments
public static void main(String[] args) {
// TODO code application logic here
Main window = new Main();
window.setVisible(true);
}NetBeans questions should be posted to the NB site. It has mailing lists and associated forums.
This tutorial from the NB site addresses running programs outside of NB
http://www.netbeans.org/kb/articles/javase-deploy.html
When you compare objects, use ".equals()" and reserve == for comparing values. -
Setup problem - sql server 2014 - "could not find the database engine startup handle" - 0x851a0019
I tried to install ,deleted and re-installed several times and no help at all.
visual studio 2013 with update 2 rc and adk installed in my computer.
error code: 0x851a0019
error messege in setup: could not find the database engine startup handle
edition: Microsoft SQL Server 2014 Enterprise (Evaluation)
logs:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 13:53:29
End time: 2014-04-03 14:47:48
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: ARIELUBA-PC
Machine processor count: 8
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS Database Engine Services 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS SQL Server Replication 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 ADK MSSQL11.ADK Database Engine Services
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 ADK MSSQL11.ADK SQL Server Replication
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3412.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Arie Luba\Downloads\WS2012R2DC\SQLServer2014-x64-ENU\x64\setup\
Installation edition: Evaluation
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Hebrew_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME:
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: ARIELUBA-PC\Arie Luba
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Hebrew_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\SystemConfigurationCheck_Report.htm
2014-04-03 14:14:28.01 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Enterprise Evaluation Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
2014-04-03 14:14:28.01 Server UTC adjustment: 3:00
2014-04-03 14:14:28.01 Server (c) Microsoft Corporation.
2014-04-03 14:14:28.01 Server All rights reserved.
2014-04-03 14:14:28.01 Server Server process ID is 7148.
2014-04-03 14:14:28.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron N5110'.
2014-04-03 14:14:28.01 Server Authentication mode is WINDOWS-ONLY.
2014-04-03 14:14:28.01 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-04-03 14:14:28.01 Server The service account is 'NT Service\MSSQLSERVER'. This is an informational message; no user action is required.
2014-04-03 14:14:28.01 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-04-03 14:14:28.01 Server Command Line Startup Parameters:
-s "MSSQLSERVER"
-m "SqlSetup"
-Q
-q "Hebrew_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-03 14:14:28.28 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-03 14:14:28.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-03 14:14:28.28 Server Detected 8099 MB of RAM. This is an informational message; no user action is required.
2014-04-03 14:14:28.28 Server Using conventional memory in the memory manager.
2014-04-03 14:14:28.31 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
2014-04-03 14:14:28.34 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-04-03 14:14:28.36 Server Query Store settings initialized with enabled = 1,
2014-04-03 14:14:28.36 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-03 14:14:28.36 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-03 14:14:28.38 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-03 14:14:28.39 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-03 14:14:28.39 spid8s Warning ******************
2014-04-03 14:14:28.39 spid8s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-03 14:14:28.40 spid8s Starting up database 'master'.
2014-04-03 14:14:28.42 Server Software Usage Metrics is disabled.
2014-04-03 14:14:28.48 Server CLR version v4.0.30319 loaded.
2014-04-03 14:14:28.56 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-03 14:14:28.62 spid8s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.63 spid8s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.64 spid8s SQL Trace ID 1 was started by login "sa".
2014-04-03 14:14:28.64 spid8s Server name is 'ARIELUBA-PC'. This is an informational message only. No user action is required.
2014-04-03 14:14:28.65 spid16s Password policy update was successful.
2014-04-03 14:14:28.66 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-04-03 14:14:28.66 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-03 14:14:28.66 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-03 14:14:28.67 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-03 14:14:28.67 spid16s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
________________________________________________________________________________________________Is it okay? (see below)
;SQL Server 2014 Configuration File
[OPTIONS]
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Detailed help for command line argument ROLE has not been defined yet.
ROLE="AllFeatures_WithDefaults"
; Use the /ENU parameter to install the English version of SQL Server on your localized Windows operating system.
ENU="True"
; Parameter that controls the user interface behavior. Valid values are Normal for the full UI,AutoAdvance for a simplied UI, and EnableUIOnServerCore for bypassing Server Core setup GUI block.
UIMODE="Normal"
; Setup will not display any user interface.
QUIET="False"
; Setup will display progress only, without any user interaction.
QUIETSIMPLE="False"
; Specify whether SQL Server Setup should discover and include product updates. The valid values are True and False or 1 and 0. By default SQL Server Setup will include updates that are found.
UpdateEnabled="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; If this parameter is provided, then this computer will use Microsoft Update to check for updates.
USEMICROSOFTUPDATE="False"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, MDS, and Tools. The SQL feature will install the Database Engine, Replication, Full-Text, and Data Quality Services (DQS) server. The Tools feature
will install Management Tools, Books online components, SQL Server Data Tools, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,DQ,AS,RS,RS_SHP,RS_SHPWFE,DQC,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,DREPLAY_CTLR,DREPLAY_CLT,MDS
; Specify the location where SQL Server Setup will obtain product updates. The valid values are "MU" to search Microsoft Update, a valid folder path, a relative path such as .\MyUpdates or a UNC share. By default SQL Server Setup will search Microsoft Update
or a Windows Update service through the Window Server Update Services.
UpdateSource="MU"
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console.
INDICATEPROGRESS="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Specify the root installation directory for shared components. This directory remains unchanged after shared components are already installed.
INSTALLSHAREDDIR="C:\Program Files\Microsoft SQL Server"
; Specify the root installation directory for the WOW64 shared components. This directory remains unchanged after WOW64 shared components are already installed.
INSTALLSHAREDWOWDIR="C:\Program Files (x86)\Microsoft SQL Server"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services
(RS).
INSTANCENAME="MSSQLSERVER"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will incorporate the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; The computer name that the client communicates with for the Distributed Replay Controller service.
CLTCTLRNAME="SQLDRC"
; The Windows account(s) used to grant permission to the Distributed Replay Controller service.
CTLRUSERS="ARIELUBA-PC\Arie Luba"
; The account used by the Distributed Replay Controller service.
CTLRSVCACCOUNT="NT Service\SQL Server Distributed Replay Controller"
; The startup type for the Distributed Replay Controller service.
CTLRSTARTUPTYPE="Manual"
; The account used by the Distributed Replay Client service.
CLTSVCACCOUNT="NT Service\SQL Server Distributed Replay Client"
; The startup type for the Distributed Replay Client service.
CLTSTARTUPTYPE="Manual"
; The result directory for the Distributed Replay Client service.
CLTRESULTDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir"
; The working directory for the Distributed Replay Client service.
CLTWORKINGDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir"
; RSInputSettings_RSInstallMode_Description
RSINSTALLMODE="DefaultNativeMode"
; RSInputSettings_RSInstallMode_Description
RSSHPINSTALLMODE="SharePointFilesOnlyMode"
; Specify the installation directory.
INSTANCEDIR="C:\Program Files\Microsoft SQL Server"
; Agent account name
AGTSVCACCOUNT="NT Service\SQLSERVERAGENT"
; Auto-start service after installation.
AGTSVCSTARTUPTYPE="Manual"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT Service\MsDtsServer120"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT Service\MSSQLServerOLAPService"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Hebrew_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Specifies the server mode of the Analysis Services instance. Valid values are MULTIDIMENSIONAL and TABULAR. The default value is MULTIDIMENSIONAL.
ASSERVERMODE="MULTIDIMENSIONAL"
; CM brick TCP communication port
COMMFABRICPORT="0"
; How matrix will use private networks
COMMFABRICNETWORKLEVEL="0"
; How inter brick communication will be protected
COMMFABRICENCRYPTION="0"
; TCP port used by the CM brick
MATRIXCMBRICKCOMMPORT="0"
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="Hebrew_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT Service\MSSQLSERVER"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Provision current user as a Database Engine system administrator for %SQL_PRODUCT_SHORT_NAME% Express.
ADDCURRENTUSERASSQLADMIN="True"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT Service\ReportServer"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Add description of input argument FTSVCACCOUNT
FTSVCACCOUNT="NT Service\MSSQLFDLauncher" -
SQL Server Express 2014 on Win8.1: Could not find the Database Engine startup handle
Hello,
I tried to follow all the similarly titled posts in this forum, yet no solution seems to work, so I hope I can find some up-to-date suggestion here (most of the older posts refer to versions from 2008 to 2012...).
I have installed Visual Studio 2013 (with the latest Update 2 RC) on a freshly installed development workstation with Win 8.1 with all its updates. Now I'd want to install SQL Server 2014 Express, but the setup keeps failing with the dreaded "Could
not find the Database Engine startup handle" error (the log follows below).
What I tried:
1) download again and repair. Same error.
2) completely uninstall by launching setup.exe /Action=uninstall (success), then rebooting the OS, then installing again. Same error. I did this twice, the second time I also manually removed any directory left out in C:\Program Files etc.
When I launch the setup, I select all the components for installation in the package SQLEXPRADV_x64_ENU.exe (1.12 GB, last downloaded today -Apr 3, 2014-), and accept all the defaults including the proposed services accounts. There is no preexisting
SQL Server instance, as expected.
The setup takes its time, and finally fails with the error quoted above. I really do not want to reformat my HD and fully reconfigure my workstation, which took about 3 days... Could anyone suggest a solution to have SQL Server 2014 setup so I can start
developing instead of wasting time in administering the system?
Thanks to all! The log follows.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 18:30:58
End time: 2014-04-03 19:04:41
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: DIOMEDES
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Daniele\Downloads\SQLEXPRADV_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, CONN, BC, SDK, BOL, SSMS, ADV_SSMS, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: DIOMEDES\Daniele
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\SystemConfigurationCheck_Report.htmThank you, it worked! I suppose that it was really your nr.3 which made the difference. I changed NT Service\MSSQL$SQLEXPRESS to NT AUTHORITY\System for the Data service. I'll then change it again as suggested (any suggestion about a "standard"
account to be used here?), even if this is a development workstation using SQL Server Express only as a local database for debugging, so security is not really a big concern.
Thanks for the feedback.Ya I know No3 was real step but just added more info so as to rule out any other possibility.
No not as such, you wont believe,quite few pf my clients I have worked for keep it with local system and they have not complained yet ,they are afraid to change account as few of them faced issue SQL Server not coming online due to logon failure( after changing
startup account to some domain a and that was happening due to some AD policy.But if you have nay plans to move Critical database in production which would be act as Database to some Internet facing application please follow my suggestion
of running SQL Server with Least privileged domain account.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
[SOLVED] mutt error "Could not find the host"
I have been trying to set up Mutt, following the Mutt wiki page. Every time I run 'mutt' at the command line, the application opens but I get the following error message at the bottom of the window:
Could not find the host "imap.qmul.ac.uk"
I've tried various .muttrc variations, but no luck so far. Here is my current .muttrc file (with my username changed to 'user' but no other changes):
set imap_user = user
set folder = "imaps://[email protected]:993/"
set spoolfile = +INBOX
mailboxes +INBOX
unset imap_passive
(Eventually I will add smtp information, but it seems premature at this stage. I also tried putting my password in there, but it did not make a difference.)
It may be relevant that I also cannot telnet into the imap server in question (or get in there with 'ssh'). I set up telnet using the telnet wiki page.
The IMAP server itself seems to be working well: I can log in there and read and send emails just fine when I use a GUI-based email client.
Any ideas, anyone, on what's going wrong?
PaulE
Last edited by PaulE (2013-01-05 11:23:07)Just in case anyone stops by and is interested in the networking question, let me add, in partial answer to skanky's questions, that I can indeed ping the server:
$ ping imap.qmul.ac.uk
PING imap.qmul.ac.uk (138.37.6.143) 56(84) bytes of data.
And the telnet error message I get is as follows:
$ telnet imap.qmul.ac.uk
Trying 138.37.6.143...
telnet: Unable to connect to remote host: Connection timed out
But I've just noticed that if I include a port the telnetting works fine:
$ telnet imap.qmul.ac.uk 993
Trying 138.37.6.143...
Connected to imap.qmul.ac.uk.
Escape character is '^]'.
I don't know why that should be, since a port number is optional in the telnet documentation I've consulted, both on my system (via 'man') and elsewhere.
And if I include a port number in my .muttrc folder setting but keep the server name instead of the IP address...
set imap_user = user
# set folder = "imaps://[email protected]:993/"
set folder = "imaps://[email protected]:993/"
set spoolfile = +INBOX
mailboxes +INBOX
unset imap_passive
... it STILL doesn't work:
Could not find the host "imap.qmul.ac.uk"
Finally the GUI application that I mentioned was a webmail service. I just go to a web page and type in my username and password, so I don't know about its settings offhand. I can try to find them out if this issue is of interest to any networking expert who wanders by.
There are deep mysteries here, but I am content for the moment that I have mutt up and running.
PaulE -
Fiori leave request error "Could not start the app due to an internal error"
Hi,
I'm getting this error "Could not start the app due to an internal error" when accessing leave request application.
I don't get this error when I login and launch the app for the first time. when I go back to the home screen and select "My Leave Requests" app again, I get this error.
If I close the error message and do a browser refresh, everything is fine again for the first time, if I access the LR app again- same error .
Other apps are working fine.
I don't see any error in gateway or App logs.
below is the Request URI
/sap/opu/odata/UI2/INTEROP/ResolveLink?linkId=%27LeaveRequest-createLeaveRequest%27&shellType=%27FLP%27&formFactor=%27desktop%27
Service call info
Anyone with similar issue? any SAP notes?
we are on
UI2_731 100 0009 SAPK-10009INUI2731 SAP UI2 IMPL. FOR NW 7.31
UI2_FND 100 0009 SAPK-10009INUI2FND SAP UI2 FOUNDATION
UI2_SRVC 100 0009 SAPK-10009INUI2SRVC SAP UI INTEGRATION SERVICES
UI5_731 100 0009 SAPK-10009INUI5731 SAP UI5 TEAM PROVIDER ON 731
UISAPUI5 100 0009 SAPK-10009INUISAPUI5 SAP UI5
UI_INFRA 100 0009 SAPK-10009INUIINFRA SAP UI INTEGRATION INFRASTRUCTURE
UIX01HCM 100 0003 SAPK-10003INUIX01HCM UI for HCM Application
Tags edited by: Michael ApplebyHi Masa,
We have required SAP notes now, we are on version 1.22.5.
It is still the same, working the first time I access the App, but subsequent access wont work until i refresh browser.
I've include the response and lpd/tile screens.
Thanks,
Phani -
Could not find application that created this file error in Acrobat
What is going on? I have an InDesign file that I want to convert by opening Acrobat and then converting to PDF. I am getting the error "Could not find application that created this file. [file name] Please select a file created by an application that resides on your computer."
I most often use this functionality when I have multiple files of different origins and need to combine them into one document. Now I'm reading the forums and some are saying this functionality is no longer supported by Acrobat. Pardon my language, but WTF?!?! This is functionality that is commonly used by me and I can only assume other users. Now you have two Adobe products that won't communicate? If so, then all the hoopla stating how great the Adobe suite is should be edited. I have never seen these products take such a step backward!
Sorry for the rant, but I find this to be ridiculous. What is the workaround, besides converting every document to PDF inside its own software and then combing the PDFs?InDesign uses a different method of making PDF files when you use the File->Export option in InDesign (even with Acrobat installed, it uses an internal copy of the PDF Library engine). As such, the two applications do not communicate directly with each other.
Support for driving the PDF conversion process from within Acrobat has been removed from Acrobat X, beacuse with the new features in InDesign CS4+, Acrobat doesn't have access to the settings it needs to control things such as multimedia, spreads and transitions. ID CS5 divides PDFs into two concepts - "print" and "interactive", neither of which match the presets used by Distiller. Creating PDFs from InDesign files must therefore take place from within InDesign itself. -
I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
-
When I use firefox to get on to the web I get the following message everytime: "Alert: Could not initialize the applications security component. The most likely cause is problems with files in your applications pforfile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security feactures." Once I click the "OK button" at the bottom of the alert box firefox starts but does not act right. For instance it will not let me look for software updates. When I click on "Check for Updates" from the "Help" drop down menu I get a message stating: "There were problems checking for, downloading, or installing this update. Firefox could not be updated because: Update XML file malformed (200). You can update firefox manually by visiting this link and downloading the latest version."
The following support articles should help:
* https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
* https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200
Maybe you are looking for
-
Does Time Machine make complete backups of Virtual Machines?
I am new to the forums, so forgive me if this has been asked before. I have a MacBook Pro and have VMWare Fusion 3 installed. I have Windows 7 and XP installed as virtual machines, and use an external hard drive to back up into using Time Machine. I
-
How to Install Windows XP on NB305?
Hi first sorry for my english:) Second i have problem with instaling win xp on nb 305... Toshiba already have drivers for xp on support page that is amazing but if you trying install win xp from usb flash disk you will stop on classic blue dead scree
-
Easy DMS cannot use additional data while creating a document
Hello, We have installed sap easy dms 7.0 We have a problem while creating a new document with SAP Easy DMS. On the DIR tab the additional data cannot be used. Do I have to change a registry setting? We already have defined classes and their features
-
HT1911 Can't remember my security question. How can I reset?
Hey everyone. How do you reset your security questions? Can't remember mine. Thanks for the help! Colby
-
I am working on a program that needs to be able to print some files. It should just be able to select files from a list and it should be able to send them to the printer (without opening them). To complicate matters more these files to be printed are