Could not find the Database Engine startup handle.
Why can't Microsoft make software that "Just Works" any more.
This is Sooooo frustrating! I'm a developer. I want to write database software and I'd like to use SQL Server. But I can't even get the damn thing to install on a fresh Windows 8.1 installation.
MySQL - installs no problem - it just works.
Oracle - Installs no problem - It just works.
I downloaded SQL Server 2012 Express with SP1, ran the Install, took most of the defaults, and I get:
Install Failed:
The following error has occurred:
Could not find the Database Engine startup handle.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254025
Of course, clicking on the link takes me to a non existing web page - what else? Just incompetence everywhere. This is Microsoft's own operating system yet they can't even get their own database to install while their competitors can.
How can they let this happen!
Then I googled the above error message. - Hundreds of hits and a lot of them are threads in forums and lots of civilians saying "try this try that" none of which works. Not a single Microsoft Employee to be found in any of the
discussions or answers. And this same problem has been happening since 2008! Yet Microsoft can't be bothered to fix it.
This kind of buggy software shouldn't have made it past Alpha testing.
Come on Microsoft, you just have to try harder. I can understand bugs that happen in unusual circumstances, after all I'm a developer too. But this won't even install on a clean Windows 8. It's tantamount to releasing a "Hello
World" program that crashes on startup!
Hi Bob,
If you make sure all your hardware and software requirements are met for installation of SQL Server 2012 on window 8.1 Its highly unlikely you will face issue.I can understand your situation so let me help you.As Kalman pointed can you paste output
of setup log file which was generated due to failed installation using Kalman's link.
Did you went thorugh below link
How to install SQL server on Win 8.1
Hardware and software requirements for SQL Server 2012
Please first read above links understand how it works and then proceed
Regarding startup handle error .AFAIK its because of Account with which you are trying to install SQL server somehow is not able to start it up after installation.Basically a righst issue.Can be different in some cases.Now whenever you install SQL server
alsway RK on Setup file and select run as administrator.When you reach page window where you need to select startup account for SQL Server please select NT Authority\System( or local system account) .
Details with steps
http://social.technet.microsoft.com/wiki/contents/articles/24364.sql-server-troubleshooting-could-not-find-database-engine-startup-handle-error-during-installation.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Similar Messages
-
Setup problem - sql server 2014 - "could not find the database engine startup handle" - 0x851a0019
I tried to install ,deleted and re-installed several times and no help at all.
visual studio 2013 with update 2 rc and adk installed in my computer.
error code: 0x851a0019
error messege in setup: could not find the database engine startup handle
edition: Microsoft SQL Server 2014 Enterprise (Evaluation)
logs:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 13:53:29
End time: 2014-04-03 14:47:48
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: ARIELUBA-PC
Machine processor count: 8
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS Database Engine Services 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS SQL Server Replication 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 ADK MSSQL11.ADK Database Engine Services
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 ADK MSSQL11.ADK SQL Server Replication
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3412.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Arie Luba\Downloads\WS2012R2DC\SQLServer2014-x64-ENU\x64\setup\
Installation edition: Evaluation
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Hebrew_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME:
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: ARIELUBA-PC\Arie Luba
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Hebrew_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\SystemConfigurationCheck_Report.htm
2014-04-03 14:14:28.01 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Enterprise Evaluation Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
2014-04-03 14:14:28.01 Server UTC adjustment: 3:00
2014-04-03 14:14:28.01 Server (c) Microsoft Corporation.
2014-04-03 14:14:28.01 Server All rights reserved.
2014-04-03 14:14:28.01 Server Server process ID is 7148.
2014-04-03 14:14:28.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron N5110'.
2014-04-03 14:14:28.01 Server Authentication mode is WINDOWS-ONLY.
2014-04-03 14:14:28.01 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-04-03 14:14:28.01 Server The service account is 'NT Service\MSSQLSERVER'. This is an informational message; no user action is required.
2014-04-03 14:14:28.01 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-04-03 14:14:28.01 Server Command Line Startup Parameters:
-s "MSSQLSERVER"
-m "SqlSetup"
-Q
-q "Hebrew_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-03 14:14:28.28 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-03 14:14:28.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-03 14:14:28.28 Server Detected 8099 MB of RAM. This is an informational message; no user action is required.
2014-04-03 14:14:28.28 Server Using conventional memory in the memory manager.
2014-04-03 14:14:28.31 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
2014-04-03 14:14:28.34 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-04-03 14:14:28.36 Server Query Store settings initialized with enabled = 1,
2014-04-03 14:14:28.36 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-03 14:14:28.36 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-03 14:14:28.38 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-03 14:14:28.39 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-03 14:14:28.39 spid8s Warning ******************
2014-04-03 14:14:28.39 spid8s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-03 14:14:28.40 spid8s Starting up database 'master'.
2014-04-03 14:14:28.42 Server Software Usage Metrics is disabled.
2014-04-03 14:14:28.48 Server CLR version v4.0.30319 loaded.
2014-04-03 14:14:28.56 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-03 14:14:28.62 spid8s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.63 spid8s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.64 spid8s SQL Trace ID 1 was started by login "sa".
2014-04-03 14:14:28.64 spid8s Server name is 'ARIELUBA-PC'. This is an informational message only. No user action is required.
2014-04-03 14:14:28.65 spid16s Password policy update was successful.
2014-04-03 14:14:28.66 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-04-03 14:14:28.66 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-03 14:14:28.66 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-03 14:14:28.67 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-03 14:14:28.67 spid16s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
________________________________________________________________________________________________Is it okay? (see below)
;SQL Server 2014 Configuration File
[OPTIONS]
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Detailed help for command line argument ROLE has not been defined yet.
ROLE="AllFeatures_WithDefaults"
; Use the /ENU parameter to install the English version of SQL Server on your localized Windows operating system.
ENU="True"
; Parameter that controls the user interface behavior. Valid values are Normal for the full UI,AutoAdvance for a simplied UI, and EnableUIOnServerCore for bypassing Server Core setup GUI block.
UIMODE="Normal"
; Setup will not display any user interface.
QUIET="False"
; Setup will display progress only, without any user interaction.
QUIETSIMPLE="False"
; Specify whether SQL Server Setup should discover and include product updates. The valid values are True and False or 1 and 0. By default SQL Server Setup will include updates that are found.
UpdateEnabled="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; If this parameter is provided, then this computer will use Microsoft Update to check for updates.
USEMICROSOFTUPDATE="False"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, MDS, and Tools. The SQL feature will install the Database Engine, Replication, Full-Text, and Data Quality Services (DQS) server. The Tools feature
will install Management Tools, Books online components, SQL Server Data Tools, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,DQ,AS,RS,RS_SHP,RS_SHPWFE,DQC,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,DREPLAY_CTLR,DREPLAY_CLT,MDS
; Specify the location where SQL Server Setup will obtain product updates. The valid values are "MU" to search Microsoft Update, a valid folder path, a relative path such as .\MyUpdates or a UNC share. By default SQL Server Setup will search Microsoft Update
or a Windows Update service through the Window Server Update Services.
UpdateSource="MU"
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console.
INDICATEPROGRESS="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Specify the root installation directory for shared components. This directory remains unchanged after shared components are already installed.
INSTALLSHAREDDIR="C:\Program Files\Microsoft SQL Server"
; Specify the root installation directory for the WOW64 shared components. This directory remains unchanged after WOW64 shared components are already installed.
INSTALLSHAREDWOWDIR="C:\Program Files (x86)\Microsoft SQL Server"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services
(RS).
INSTANCENAME="MSSQLSERVER"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will incorporate the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; The computer name that the client communicates with for the Distributed Replay Controller service.
CLTCTLRNAME="SQLDRC"
; The Windows account(s) used to grant permission to the Distributed Replay Controller service.
CTLRUSERS="ARIELUBA-PC\Arie Luba"
; The account used by the Distributed Replay Controller service.
CTLRSVCACCOUNT="NT Service\SQL Server Distributed Replay Controller"
; The startup type for the Distributed Replay Controller service.
CTLRSTARTUPTYPE="Manual"
; The account used by the Distributed Replay Client service.
CLTSVCACCOUNT="NT Service\SQL Server Distributed Replay Client"
; The startup type for the Distributed Replay Client service.
CLTSTARTUPTYPE="Manual"
; The result directory for the Distributed Replay Client service.
CLTRESULTDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir"
; The working directory for the Distributed Replay Client service.
CLTWORKINGDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir"
; RSInputSettings_RSInstallMode_Description
RSINSTALLMODE="DefaultNativeMode"
; RSInputSettings_RSInstallMode_Description
RSSHPINSTALLMODE="SharePointFilesOnlyMode"
; Specify the installation directory.
INSTANCEDIR="C:\Program Files\Microsoft SQL Server"
; Agent account name
AGTSVCACCOUNT="NT Service\SQLSERVERAGENT"
; Auto-start service after installation.
AGTSVCSTARTUPTYPE="Manual"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT Service\MsDtsServer120"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT Service\MSSQLServerOLAPService"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Hebrew_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Specifies the server mode of the Analysis Services instance. Valid values are MULTIDIMENSIONAL and TABULAR. The default value is MULTIDIMENSIONAL.
ASSERVERMODE="MULTIDIMENSIONAL"
; CM brick TCP communication port
COMMFABRICPORT="0"
; How matrix will use private networks
COMMFABRICNETWORKLEVEL="0"
; How inter brick communication will be protected
COMMFABRICENCRYPTION="0"
; TCP port used by the CM brick
MATRIXCMBRICKCOMMPORT="0"
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="Hebrew_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT Service\MSSQLSERVER"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Provision current user as a Database Engine system administrator for %SQL_PRODUCT_SHORT_NAME% Express.
ADDCURRENTUSERASSQLADMIN="True"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT Service\ReportServer"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Add description of input argument FTSVCACCOUNT
FTSVCACCOUNT="NT Service\MSSQLFDLauncher" -
SQL Server Express 2014 on Win8.1: Could not find the Database Engine startup handle
Hello,
I tried to follow all the similarly titled posts in this forum, yet no solution seems to work, so I hope I can find some up-to-date suggestion here (most of the older posts refer to versions from 2008 to 2012...).
I have installed Visual Studio 2013 (with the latest Update 2 RC) on a freshly installed development workstation with Win 8.1 with all its updates. Now I'd want to install SQL Server 2014 Express, but the setup keeps failing with the dreaded "Could
not find the Database Engine startup handle" error (the log follows below).
What I tried:
1) download again and repair. Same error.
2) completely uninstall by launching setup.exe /Action=uninstall (success), then rebooting the OS, then installing again. Same error. I did this twice, the second time I also manually removed any directory left out in C:\Program Files etc.
When I launch the setup, I select all the components for installation in the package SQLEXPRADV_x64_ENU.exe (1.12 GB, last downloaded today -Apr 3, 2014-), and accept all the defaults including the proposed services accounts. There is no preexisting
SQL Server instance, as expected.
The setup takes its time, and finally fails with the error quoted above. I really do not want to reformat my HD and fully reconfigure my workstation, which took about 3 days... Could anyone suggest a solution to have SQL Server 2014 setup so I can start
developing instead of wasting time in administering the system?
Thanks to all! The log follows.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 18:30:58
End time: 2014-04-03 19:04:41
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: DIOMEDES
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Daniele\Downloads\SQLEXPRADV_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, CONN, BC, SDK, BOL, SSMS, ADV_SSMS, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: DIOMEDES\Daniele
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\SystemConfigurationCheck_Report.htmThank you, it worked! I suppose that it was really your nr.3 which made the difference. I changed NT Service\MSSQL$SQLEXPRESS to NT AUTHORITY\System for the Data service. I'll then change it again as suggested (any suggestion about a "standard"
account to be used here?), even if this is a development workstation using SQL Server Express only as a local database for debugging, so security is not really a big concern.
Thanks for the feedback.Ya I know No3 was real step but just added more info so as to rule out any other possibility.
No not as such, you wont believe,quite few pf my clients I have worked for keep it with local system and they have not complained yet ,they are afraid to change account as few of them faced issue SQL Server not coming online due to logon failure( after changing
startup account to some domain a and that was happening due to some AD policy.But if you have nay plans to move Critical database in production which would be act as Database to some Internet facing application please follow my suggestion
of running SQL Server with Least privileged domain account.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
FrancescoWell, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana -
The system could not find the finished material in the stock.
The system could not find the finished material in the stock and gives the following error:
Only 0 YD of material 9000345 A-PIECE01 available.
I received the batch managed material from production with T-code=mb1c and mov type=521.
The received material is transferred into material with T-code=mb1b and mov type=309.
And finally the material is packed and thus the handling unit is created.
whenever i comes to make the delivery order in vl01n,the system could not find the stock packed in handling units and gives the error(Only 0 YD of material 9000345 A-PIECE01 available)
Regards:VijayHi Vijay,
I have a question that have you define the UoM properly in the material master.
Also check the stock is showing or not in the system for your material.
Regards,
MT -
I am developing a WSS based WCM site for a customer which has a bilingual interface. Now everything is wokring fine in the development environment. Today I backed-up the Content Database and took the related control file (.ascx & .ascx.cs) to deploy it to the cusomter's test machine. I dint face any problems with the deployment, and after deleted and added the Content DB from Central Administration, I was able to access the English part of the website along with my changes without any problem.
But when I tried accessing the Arbic part of the website, Its giving me the following error,
تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Roughly translated, it means "Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new."
Can you please tell me what is the cause of the problem and how to rectify it? Also do I need to
Regards,
SoniSSPIt is searching for the page, but that page is not available. Did u install the current language pack?
-
'Could not find the requested node error' when guests join the meeting room
I am working on a program where the owner would allow guests after they knock to enter the meeting room. Upon acceptance, they would also be permitted to publish/subscribe audio.
My ' meeting owner' application code is an adaptation of the Knocking Queue example. The 'owner app' code has the following settings in its creation complete.
// Require that guests must knock.Note that this line changes the setting of your room so that in future anyone guest coming in
// has to knock.
cSession.roomManager.guestsHaveToKnock = true;
//Enable autopromote
cSession.roomManager.autoPromote =
true;
I get an error when the owner logins in first and accepts the guest into the meeting room.
// Event handler function for displaying the selected Alert button.
private function alertClickHandler(event:CloseEvent):void {
var queue:Array = pendingArray;
if ( cSession.userManager.myUserRole == UserRoles.OWNER ) {
var item:Object = pendingArray.shift();
trace (item["label"]);
trace (item["descriptor"].userID);
if (event.detail==Alert.OK)
//Admit user for chatting
cSession.roomManager.knockingQueue.acceptUser(item["descriptor"].userID);
//Allow user to publish audio - supposed to be promoted through room setting
//audioPub.setUserRole(item.descriptor.userID, UserRoles.PUBLISHER);
else //if (event.detail==Alert.CANCEL)
cSession.roomManager.knockingQueue.denyUser(item["descriptor"].userID);
The 'client' application throws the following error.
SWF] C:\Documents and Settings\a246216\My Documents\Flex Builder 3\Client Chat Tool\bin-debug\ClientChatTool.swf - 1,572,471 bytes after decompression
AFCS Beta Build # : 0.92
requestInfo http://connectnow.acrobat.com/fidelity2/ramr?guk=ZzprOg==&mode=xml&x=0.011843591462820768
Getting FMS at https://na2.connectnow.acrobat.com/fms?ticket=1468amkp7k35g, attempt #1/3
result: <fms>
<origin>fms2.acrobat.com</origin>
<proto_ports>rtmps:443</proto_ports>
<retry_attempts>2</retry_attempts>
</fms>
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 protocols: [object ProtocolPortPair]
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 [attempt 1 of 2] Connecting to 0/0: rtmps://fms2.acrobat.com/cocomo/na2-sdk-825d634c-46ed-4ed3-aa58-7450f0f7e36a/ramr #startProtosConnect#
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 tempNetStatusHandler 0/1,NetConnection.Connect.Success
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 isTunneling? false
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 is using RTMPS? true
RECEIVED LOGIN AT SESSION
.user descriptor from server [object]
.displayName [string]= k
.userID [string]= GUEST-110858C2-4F16-4FE8-BF2C-D572F915FEC5
.affiliation [number]= 5
.role [number]= 5
RECEIVENODES UserManager
receiveAllSynchData UserManager
checkManagerSync:[object UserManager]
RECEIVENODES FileManager
receiveAllSynchData FileManager
checkManagerSync:[object FileManager]
RECEIVENODES AVManager
receiveAllSynchData AVManager
checkManagerSync:[object StreamManager]
RECEIVENODES RoomManager
receiveAllSynchData RoomManager
checkManagerSync:[object RoomManager]
RECEIVENODES Chat
receiveAllSynchData Chat
Error: Could not find the requested node.
at com.adobe.rtc.sharedModel::CollectionNode/getNodeConfiguration()[C:\work\main\connect\coc omoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:394]
at com.adobe.rtc.sharedManagers::StreamManager/getNodeConfiguration()[C:\work\main\connect\c ocomoPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:577]
at com.adobe.rtc.collaboration::AudioPublisher/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\collaboration\AudioPublisher.as:1009]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedManagers::StreamManager/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:1410]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedModel::CollectionNode/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveCascadingUserRole()[C: \work\main\connect\cocomoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:813]
at com.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveUserRole()[C:\work\mai n\connect\cocomoPlayer10\src\com\adobe\rtc\messaging\manager\MessageManager.as:715]
at com.adobe.rtc.session.managers::SessionManagerBase/receiveUserRole()[C:\work\main\connect \cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerBase.as:352]
The above error is thrown just when the 'guest' is accepted into the meeting room. The guest has not published anything at this point.
The chat part is working fine.
I have tried different ways to resolve this issue but I am not getting anywhere. I have tried different things. Your help is appreciated.
RamIt is win 7 64 bit system and same error on Illustrator x86 and x64.
-
Could not find the main class: oracle.ide.boot.Launcher. Program will exit
Hi,
I have installed Oracle11g_win64_11gR1, Database and Client.
The issue is unable to invoke "sqldeveloper", getting the following error message. Could you please help ?
FYI. I have already downloaded and installed installed JRE and JDK.
ie. C:\Program Files (x86)\Java\jre6\ and C:\Program Files\Java\jdk1.6.0_24, still did not work.
C:\Users\oracle>java -version
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02, mixed mode)
Let me know, if you need more information. Here is the error message.
Error Message
=========
(1) if I invoke sqldeveloper, directly from the location " C:\app\oracle\product\11.1.0\db_1\sqldeveloper\sqldeveloper\bin " using explorer, I do get error message
"Unable to find a java Virtual Machine.
To point to a location of java Virtual machine please refer to the Oracle9i JDeveloper Install Guide ( jdev/install.html)"
(2) if I invoke sqldeveloper, directly from the locationC:\app\oracle\product\11.1.0\client_1\sqldeveloper, it prompts me to enter "full path for java.exe".
When I enter full path and continue, still it continue to prompt and ask the same input.
(3) if I invoke sqldeveloper from from command prompt using the batch file "sqldeveloper.bat"
C:\Users\oracle>C:\app\oracle\product\11.1.0\client_1\sqldeveloper\sqldeveloper\
bin\sqldeveloper.bat
C:\Users\oracle>java -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10
-XX:JavaPriority9_To_OSPriority=9 -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_F
LAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.shell.font.languages= -Dide.co
nf="sqldeveloper.conf" -Dide.home.dir.name=.sqldeveloper -classpath ..\..\ide\l
ib\ide-boot.jar;..\..\jdev\lib\xmleditor.jar;..\..\ide\lib\oicons.jar;..\..\..\j
dbc\lib\ojdbc5.jar;..\..\jlib\jewt4.jar;..\..\jlib\share.jar;..\..\sqldeveloper\
lib\jle2.jar oracle.ide.boot.Launcher
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ide/boot/Launc
her
Caused by: java.lang.ClassNotFoundException: oracle.ide.boot.Launcher
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
Could not find the main class: oracle.ide.boot.Launcher. Program will exit.
OS
==============
MS Windows 7 Home Premium
sqldeveloper.conf
===================
SetSkipJ2SDKCheck true
IncludeConfFile ../../jdev/bin/ide.conf
AddVMOption -Dapple.laf.useScreenMenuBar=true
AddVMOption -Dcom.apple.mrj.application.apple.menu.about.name="SQL_Developer"
AddVMOption -Dcom.apple.mrj.application.growbox.intrudes=false
AddVMOption -Dcom.apple.macos.smallTabs=true
AddVMOption -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true
AddJavaLibFile ../../jdev/lib/xmleditor.jar
AddJavaLibFile ../../ide/lib/oicons.jar
AddJavaLibFile ../../jlib/jewt4.jar
AddJavaLibFile ../../jlib/share.jar
AddJavaLibFile ../ide/jlib/xmlef.jar
AddJavaLibFile ../../sqldeveloper/lib/jle2.jar
AddJavaLibFile ../../sqldeveloper/lib/oracle.dbtools.logging.jar
AddVMOption -Dsun.java2d.ddoffscreen=false
AddVMOption -Dwindows.shell.font.languages=
IncludeConfFile sqldeveloper-nondebug.conf
SetJavaHome C:\Program Files\Java\jdk1.6.0_24
Edited by: sivapara on Feb 16, 2011 1:08 PMI was able to resolve this issue by performing following.
1. Go to the location where sqldeveloperW.exe is being executed from.
2. You will find a file sqldeveloper.conf in that location. Edit this file and change the value of IncludeConfFile to point to actual place. For me following were old and new values.
OLD (Wrong) : IncludeConfFile ../../jdev/bin/ide.conf
NEW (Correct) : IncludeConfFile ../../ide/bin/ide.conf
After making above change in the sqldeveloper.conf file. Save and close it. Restart SQLDeveloper. You will not get the error anymore.
Thanks
Ravi -
Could not find the specified responsibility
Hi All,
I have created project for Employee Self-Service.
Got all the relevant file by seeing through the "About this Page" link.
Firstly I am not able to find the envVO file. Can anybody tell me where it is ?
Secondly Compiled the project and run the EmpAppraisalsPG.xml
the .dbc file is as follows
TWO_TASK=VIS
GWYUID=APPLSYSPUB/PUB
APPL_SERVER_ID=1097ABE54D4F4CF0B290A5F309C4702439866149487687361833313420266071
GUEST_USER_PWD=GUEST/ORACLE
FNDNAM=APPS
APPS_JDBC_DRIVER_TYPE=THIN
DB_HOST=c3174.polaris.co.in
DB_PORT=1521
FND_MAX_JDBC_CONNECTIONS=100
FND_JDBC_CONTEXT_CHECK=true
But it gives the error shown below
Tutalii: C:\jdev\jdevbin\jdev\appslibrt\iasjoc.zip archive
ICX DIAGNOSTIC: routine getAppID : couldn't get a getAppID
ICX DIAGNOSTIC: FND_TOP = C:\jdev\jdevhome\jdev\myhtml\OA_HTML\
ICX DIAGNOSTIC: application_id = -1
ICX DIAGNOSTIC: responsibility_id = -1
ICX DIAGNOSTIC: security_group_id = -1
oracle.apps.fnd.framework.OAException: Application: ICX, Message Name: Could not find the specified responsibility. (Could not lookup message because there is no database connection)
at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:158)
at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80)
at runregion.jspService(runregion.jsp:96)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797)
at java.lang.Thread.run(Thread.java:534)
ICX DIAGNOSTIC: routine createSession: Stack Trace from createSession when active session not found
Can anybody help me out. its urgent...
Regards,
DeepakHi Deepak,
Please check the project's properties:
1. Common > Oracle Applications > Runtime Connection
Connection
User Name : XXX
Password : *******
Responsibility
Application Short Name: AK
Responsibility Key : FWK_TBX_TUTORIAL
To make sure that the mentioned parameters' value are correct
2. Check valid OA user XXX to contain the following valid resopnsibilities:
OA Framework ToolBox Tutorial(Key:FWK_TBX_TUTORIAL)
OA Framework ToolBox Tutorial Labs(Key:FWK_TOOLBOX_TUTORIAL_LABS)
Good luck.
Regards,
Arone -
"Could not find the application that created this file" error when trying to combine files
I am working with a user that is trying to combine a pdf & word doc (docx). When they try to combine the files she gets the error: "Could not find the application that created this file" & "Please select a file created by an application that resides on your computer". The computer is running windows XP, with office 2010 SP1, & Adobe Acrobat Pro X.
Per previous suggestions, I have already checked to see if Adobe PDFMaker is enabled as a Word plugin, and it is.
Recentley the user was running Acrobat 6, and this error did not occur. It is only after upgrading to Acrobat X that this is happening. Any help with this issue would be appreciated.This can also be caused if the files are in a folder deep in the file system. For example C:/xxxxxxxxxxxxxxx/yyyyyyyyyyyyyyy/zzzzzzz/aaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbb /cccccccccccccccccccc/dddddddddddddddd/eeeeeeeeeeeeeeeeeeee/ffffffff/ggggggg/hhhhhhhhhhhhh hhhhhhhhhh/myPDF.pdf
At some point Adobe PDFMaker cannot handle the path length (also, Windows can't handle the path length either eventually)
Solution: move the files to a shorther path (perhaps the desktop) and try from there.
I am filing a bug report with Adobe. A descriptive exception message should be thrown instead of "could not file the app.." -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
11.1.1.4:Could not find the item selected to match the value of type Number
Hi,
I have a taskflow with an input parameter.
The input parameter value is to be assigned to a list item as the default selected value.
I have mapped the pageFlow scope parameter to set value to the list item using input page parameters defined in task flow.
but When i Run the task flow the value does not get assigned to the drop down list and jdevloper console screen shows up the following message
"Could not find the item selected to match the value 2 by type: oracle.jbo.domain.Number in LOV."
But If I click the Lov to check the values it shows that value is present in the list.
The same configurations works if the list of values is for a column with type as java.lang.String.
Is it somethng different that is to be done for a Number field to assign value from a taskflow parameter?
Edited by: user3067156 on Jun 25, 2011 3:34 PMHi Jobinesh,
I am assigning the default value in the task flow using input page parameters ...
<view id="VIEW1">
<page>/title.jsff</page>
<input-page-parameter>
<from-value>#{pageFlowScope.pInputTyp_Id}</from-value>
<to-value>#{bindings.pTyp_Id1.attributeValue}</to-value>
</input-page-parameter>
</view id>
It does not assign the value, if Bind variable(pTyp_Id1) NDtype and task flow input parameter(pInputTyp) class type, both are set to use type oracle.jbo.domain.Number.
If I change both to use java.lang.String and additionally also change the VO defination the accept the bind variable of type string, it assigns the value correctly.
Usecase:
I have a a task flow for which has its first page a search page.
The Search page is created using operation execute with params and dragging the query parameters on the page.
The Query parameters are to be filled using a select one choice option and the list is bound to the master values.
This task flow can be used inside a standalone page as a region to provide a search page
The same task flow can be called from within another taskflow which will provide the default values for the drop down lists ..
Since the search page is a jsff fragment i dont have a page on load handler to provide default values..
So assiging the values using input page parameters defined in task flow view tag.
For testing I am passing the taskflow input parameters by calling the task flow from a jspx page a region . When I configure this task flow a region in a page its asks for providing the values for the parameters
And the same gets configured in my testpage def as
<executables>
<variableIterator id="variables"/>
<taskFlow id="Flow1" taskFlowId="/WEB-INF/Flow1.xml#Flow1"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding">
<parameters>
<parameter id="pTyp_Id" value="1207"/>
</parameters>
</taskFlow>
</executables>
Edited by: user3067156 on Jun 27, 2011 1:50 PM -
Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP. I am using the Design Studio 4.3.2 for building the O2A 2.1.0 PIP. Please let me know how to resolve this issue. Here I am enclosing the log file .
We have basically the same issue when we try to create the interpreter using the embedded method..
I was able to use the interpreter embedded in a java client as long as the weblogic jars were located in a weblogic install if I tried to use them from a maven repository no luck at all...
All of this worked easily in 9.2 now in 10.3 it seems more error prone and less documented.
I have seen close to a 100 posts on issues related to this so is there a document which outlines specifics....
We / I have used weblogic now for almost 10 years and moving from 8.1 to 9.2 was painful and we expected the move from 9.2 to 10.3 not to be soo bad but its proving to be as painful if not more painful than moving to 9.2. We seem to spend a good bit of our time working around issues in the next new release that were not in the previous one..
Any help would be appreciated I think we will open a support case but even that is more painful...
Any help would be greatly appreciated..
PS: We confirmed that all jars in the startweblogic classpath were in the startup. The server we have the embedded wlst instance is a managed server and we are using the component in a war... Are there any restrictions which we are unaware of.
Error we get is
1 [ERROR] com.tfn.autex.order.weblogic.QueueMaintenanceUtility.addQueue():217 Error Adding Queue wowsers JNDI Name wowsers Exception: Invocation Target exception while getting the WLSTOffLineScript path -
"Java Virtual Machine Launcher- could not find the main class"
My system is working very slowly, especially during start-up.
During the start-up, a small pop-up appears that reads:
"Java Virtual Machine Launcher
could not find the main class. Program will exit"
Would this cause slow operation?
How do I fix this?
My system is Windows XP Professional, version 2002 SP1; Intel Pentium III Processor, 647 MHz, 128 RAM
Thanks for whatever help you can offer.
Lou
My experience level is
Beginner
Novice
Intermediate X
Expert
GuruThat popup message indicates that some program has tried to start the Microsoft JVM. When this occurs at startup, it often means that a spyware (or worse) program is operating. Go to this Sun site for more information.
http://java.com/en/download/help/spyware.jsp -
Hi All,
I am getting error while executing oDATA service from SAP Netweaver Gateway
Error details:
RFC call ended with "Communication Failure" exception (Function call failed; could not find the function
I am using SAP NG 740
Project is created in Gateway system using SEGW having Map to Datasource option used.
in SPRO manage alias, I had seleted Local App option. Screen attached
I had tried all troubleshooting like delete and add service and alias in "/IWFND_MAINT_SERVICE".
but still getting same error for all service.
Kindly advise.
Regards
VivekHello Vivek,
Service builder would have also generated code for RFC Exception handling to catch exceptions raised when communication fails between your GW and BE for some reasons.
Handling is done for 1. System Failure 2. Communication Failure & 3. Business Failure;
Put a BP in your DPC or DP_EXT class where exception code is written to check what exactly is has caused communication failure.
Check if that RFC is existing in that destination or not.
For your reference : Code would be something like this. Put BP here and check the problem.
* Error and exception handling
IF lv_subrc <> 0.
* Execute the RFC exception handling process
me->/iwbep/if_sb_dpc_comm_services~rfc_exception_handling(
EXPORTING
iv_subrc = lv_subrc
iv_exp_message_text = lv_exc_msg ).
ENDIF.
Go inside this method and check to get info on what has to be done to resolve issue.
Check carefully what has gone wrong and fix it accordingly.
No need of adding service & deleting as problem is not because of that.
Regards,
Ashwin
Maybe you are looking for
-
Pdf page rendered as white on white (works perfectly in windows, though)
Hi. I found an annoying bug on *all* my apple products. One pdf page in a book I am reading is rendered as white on white on any iOS or Mac OS software. The text is there (I can select it, highlight it, etc) but I could not find any way to display it
-
DB Link from Oracle to SQL Server error
Dear buddies, I need to perfome some select on the tables which reside in SQL Server 2005 from Oracle 10g. I followed the steps given in : http://www.dba-oracle.com/t_heterogeneous_database_connections_sql_server.htm I could perform a TNS ping which
-
Drag and drop onto/from a JTable but not onto itself on 1.5
Hi, i can drag files from Windows Explorer onto a Jtable ,and they get opened and listed in the table, and I can drag records from the table and drop them into Windows Explorer to make a copy of a file. In order to drag files from the table I just ne
-
I have a huge problem! I've forgot my Ipod touch password, so I tried it a few times! Now my Ipod is disabled. So I affiliated the ipod to itunes but it doesn't work, I can't restore it! So what should I do?
-
Installed 4.01, now no audio for DV files....
HD files taken with my Sony SR-HD12 are fine, but I can no longer hear any audio for any files shot in DV. Anyone else have this issue?