Could not found any usage key in the work center WC001(Use T-CODE CR02)?

my question:
(1) I have created one Work Center WC001 and one Plant HJW1.
(2) I have created one Routing with T-CODE CA01.
(3) Then I use T-CODE CA02 to change this Routing.
(4) When I enter the Head details screen,I click the Operations button to enter the Operations Overview screen.
(5) In the Operations Overview screen list,I input the Work Center WC001 and the Plant HJW1 at the first line and press enter.Then the sap raise error message like below.
(6) The question was: I could not found any usage key in the work center WC001(Use T-CODE CR02)! Could any one tell me the answer or give me some advice to resolve the problem?Thank you so much.
error message:
Work center WC001 plant HJW1 does not exist for task list type N
Message no. CR084
Diagnosis
You want to allocate the work center WC001 to a task list of the type N . However this work center is not intended to be used in a task list of the type N.
Procedure
The usage of a work center in task lists is restricted via the usage key. You define this key in work center customizing and allocate to it those task list types in which a work center with this usage key can be used.
Proceed as follows:
Check the usage key for the work center WC001 in work center maintenance.
If necessary change the usage key in the work center or change the allocation of task list types to the usage key in customizing or
allocate to the task list a work center which is valid for use in a task list of the type N.

Hi
1) Check what task list usage key you entered for the work center in the basic data . If it is 009 then the work center can be used in all task list type.
2) If you have defined and used any other usage key , ensure that for this key , the routing type N is allowed in OP45.
Regards,
Ramasamy

Similar Messages

Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do?

Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do? Any help at all would be appreciated.

Have you tried scanning the source image? Disk Utility > Images menu > Scan Image for Restore…

I could not find any option to export bookmarks. I am using firefox 5.o on ubuntu 11.04

when I go to "Bookmarks" -> "Show All Bookmarks" the only word that happens in the header is "Library", there is no way to do nothing more for management.
tank you

Absolutely brilliant answer!
Been trying to import my favourites from Ubuntu 10.04 LTS version for a while now, and just couldn't find the Import Backup link. Thanks very much.

The system could not determine any material BOMs

Hello All,
I am testing the Preference Processing scenario.
I have a BOM available in Feeder system which gets exploded in Sales Order. The preference indicators and every BOM material is already transferred to GTS system
When I am transferring the Initially BOM then system gives the message that "System could not determine any material BOMs."
The main material already has been flagged for Configurable material.
If I use the transaction /SAPSLL/KMATWLR3_03 (Display worklist of Configurable Material), I am able to see the sales order but when I select the line item and press the push button to transfer the BOM to GTS system gives message that Error in BOM Explosion
Please help me to resolve the issue
Thanks & Regards
Rahul

Hello Dave,
I have maintained the BOM Usage 3 and 5 for Global, Country and Plant level.
The table entries are displayed as below
But still I am getting the same error while transferring the BOM

I COULD NOT FIND MY PRODUCT KEY

SIR MY NAME IS ASHISH TIWARI I HAVE PURCHASED HP PAVALION G6 LAPTOP ON 8 NOV 2012 DATE. INVOICE NO 1002 FROM HP WORLD MP NAGAR ZONE 2 BHOPAL MADHYAPRADESH INDIA.I COULD NOT FOUND MY PRODUCT KEY. SIR I WANT TO UPDATE FEATURE WINDOWS 8.1 BUT MY SYSTEM WANT A PRODUCT KEY. SO PLEASE PROVIDE ME A PRODUCT KEY OF MY LAPTOPMY LAPTOP DETAILS ARE PC NAME- NB PC PAVILION G6-2206TX-HP SR NO- 5CD2380WZZBCT NO- 6BUEP4RCF2WK10CCT NO- WBGUE0A1R3GB1L MY CONTACT NO IS- +91-8602964034 THANKSASHISH TIWARIINDORE

Dear ovey
you can repartion you HD without installing a different version of the operating system that you have if any other versions are used you will need to purchase a new product key
but be noted that resizing the HDD will delete the recovery partition and the one key recovery property will not be working any more
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Data selection procedure 400 could not find any data

Hi ,
I am getting the Information message "Data selection procedure 400 could not find any data " while doing the Result recording of a inspection lot
Inspection lot status :- REL CALC
Inspection lot Origin :- 04 GR from production order
No user status active
This message i am getting in some inspection lot only
Kindly help me to understand the possible resaon for this message
Thanks,
Ishwar

hi,
u r using any copy inspection result like of thing, if not than please provide the Mssg number. and possible than check ur plan properly.
F9 i have checked, this prblm occurs when u using the Copy inspecttion result during RR in QA32, ma suggesstion is to checck ur config "Copy inspection results" in SPRO properly against inspection type "04", and than check ur qaulity plan, than execute it will resolve.
For more information:
SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
Regards
Edited by: D GURU on Dec 5, 2011 8:35 AM

IW41: automatic update of activity type when changing the work center?

Hello colleagues,
when doing a time confirmation with IW41, we have following problem:
In the PM order the operations are assigned to a neutral executing work center, as it not known which individual technician is completing the operation later on.
Now when the individual technician is entering the time confirmation with IW41, system is proposing the work center indicated in the operation from the PM order, then technician is overwriting the work center proposal with his own individual work center ID (and pressing Enter), but the activity type is not getting updated automatically. So the technician must jump to field "activity type" and choose the correct activity type.
Is there any solution (hopefully with user exits!) to have the field "activity type" automatically updated with the one indicated in the work center, which was entered manually?
Thanks for your ideas!
Regards,
Patrick

Hi Maheswaran,
yes, as usual all PM work centers have only 1 activity type assigned in the costing tab.
We also checked the settings of the activity type (KL03), but we just found one difference: the price indicator was set on 3 "Determined manually" - we've changed to 1 "Plan price, automatically based on activity" (..same setting as for the act. type of the work center with working update of act.type).
We tested already all possible constellations and scenarios, but we have not found any good reason for the behaviour.
Thanks for your efforts so far!
Patrick

The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. O.O?

The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. WHAT 'success? The report says the console like this: (at approximately 12.30)
No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOneInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOrchestralInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRhythmSectionInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRemixToolsInstruments' found at '/'.
03/05/11 12:08:32 MIDIServer [255] MIDIServer [255] starting; arch = i386
03/05/11 12:34:35 com.apple.launchd [1] *** launchd [1] has started up. ***
03/05/11 12:35:06 com.apple.launchd.peruser.501 [86] (com.apple.ReportCrash) Falling back to default Mach exception handlers. Could not find: com.apple.ReportCrash.Self
03/05/11 12:35:09 com.apple.launchd.peruser.501 [86] (com.apple.Kerberos.renew.plist [110]) Exited with exit code: 1
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:32 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:36:06 com.apple.WindowServer [64] Tue May 3 12:36:06 MacBook-Pro-17-of-Admin.local WindowServer [64] <error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
03/05/11 12:43:39 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.

Do you have backups of all the data on the startup drive? If not, do nothing else until you've backed up that data, if you still can.

The system could not find any entries that are relevant to costing.

plz give the solution ,its urgent
Message no. CK060
Diagnosis
The system could not find any entries that are relevant to costing.
System Response
The system did not cost the object.
Procedure
Check whether the following objects should be flagged as relevant to costing:
Items in the BOM
Display BOM
Operations in the routing
Control key in the routing
1. Look at the message log.
2. Check whether a quantity was specified in the confirmation.

hi,
iam facing the problem while creating the
stnadard cost estimate ck11n
the system prompts the following message
confirmation
Logistics - General (LO)
Information from the vendor to the recipient about the status of the purchase order.
The term confirmation covers different types of information from the vendor to the customer, such as order, loading or transportation confirmation and the shipping notification.
If materials planning takes place without a confirmation, planning can only be based on the delivery dates and quantities in the purchase order. In contrast, confirmations make it possible for the customer to plan the materials more precisely because between the purchase order and planned delivery date, more reliable information has become available.
Logistics - General (LO)
Communication sent by a vendor to a customer regarding the status of a purchase order.
The term "confirmation" (short for "vendor confirmation") is an umbrella term for various types of information provided by a vendor to a customer, including order acknowledgments, loading or transport confirmations and shipping notifications.
If the customer's materials planning and inventory control system does not work with confirmations, it can only refer to the delivery dates and quantities set out in the purchase order. The use of confirmations, on the other hand, makes the materials planning and inventory control process more precise, since between the PO date and the planned delivery date the customer receives increasingly reliable information about the pending arrival of ordered goods.
Treasury Management (TR-TM)
After concluding a financial transaction, a confirmation of the related contract data is sent to the relevant business partner. Confirmations can be printed or sent electronically directly from the R/3 System. Confirmation forms are defined via the correspondence type.
Logistics - General (LO)
Part of order monitoring, this documents the processing status of operations or sub-operations. In the SAP System, a distinction is made between partial and final confirmations.
A final confirmation is used to determine
at which work center the operation should be carried out
who has carried out the operation
the quantities of yield and scrap quantities that have been produced
the size of the standard values required for the actual operation
Materials Management (MM)
Communication from a vendor to a customer providing information on the status of a purchase order.
As used in this sense, the term "confirmation" can cover a number of different documents, such as order acknowledgment, loading confirmation, or shipping notification. Also termed "order acceptance/fulfillment confirmation".
If the materials planning and control system operates without such confirmations, it can only work on the basis of the delivery dates and quantities in the purchase order. Confirmations, on the other hand, enable the customer to plan more exactly. In the period between the issue of the PO and the planned delivery date he is provided with more up-to-date and increasingly reliable information on the expected delivery.
Project System (PS)
A confirmation is a part of network control. It documents the state of processing for network activities and activity elements. There are two types of confirmations in the R/3 System: partial and final confirmations.
A confirmation is used to record:
the work center where the activity was carried out
the person who carried out the activity
the yield and scrap produced in an activity
the actual values for the standard times
Intellectual Property Management (CRM-IM-IPM)
A report made by the licensee and defined in the rights sale contract on sales volumes or other quantities (such as audience figures for a film) during a period.
Receiving (ECO-BBP-REC)
An electronic document that combines the functions of goods receipts and service entry sheets. By creating a confirmation:
Vendors can confirm that they have fulfilled their orders
Employees can confirm the goods and services they ordered via their shopping baskets
Central goods recipients can confirm the goods and services ordered by employees for whom they are responsibleconfirmation
Logistics - General (LO)
Information from the vendor to the recipient about the status of the purchase order.
The term confirmation covers different types of information from the vendor to the customer, such as order, loading or transportation confirmation and the shipping notification.
If materials planning takes place without a confirmation, planning can only be based on the delivery dates and quantities in the purchase order. In contrast, confirmations make it possible for the customer to plan the materials more precisely because between the purchase order and planned delivery date, more reliable information has become available.
Logistics - General (LO)
Communication sent by a vendor to a customer regarding the status of a purchase order.
The term "confirmation" (short for "vendor confirmation") is an umbrella term for various types of information provided by a vendor to a customer, including order acknowledgments, loading or transport confirmations and shipping notifications.
If the customer's materials planning and inventory control system does not work with confirmations, it can only refer to the delivery dates and quantities set out in the purchase order. The use of confirmations, on the other hand, makes the materials planning and inventory control process more precise, since between the PO date and the planned delivery date the customer receives increasingly reliable information about the pending arrival of ordered goods.
Treasury Management (TR-TM)
After concluding a financial transaction, a confirmation of the related contract data is sent to the relevant business partner. Confirmations can be printed or sent electronically directly from the R/3 System. Confirmation forms are defined via the correspondence type.
Logistics - General (LO)
Part of order monitoring, this documents the processing status of operations or sub-operations. In the SAP System, a distinction is made between partial and final confirmations.
A final confirmation is used to determine
at which work center the operation should be carried out
who has carried out the operation
the quantities of yield and scrap quantities that have been produced
the size of the standard values required for the actual operation
Materials Management (MM)
Communication from a vendor to a customer providing information on the status of a purchase order.
As used in this sense, the term "confirmation" can cover a number of different documents, such as order acknowledgment, loading confirmation, or shipping notification. Also termed "order acceptance/fulfillment confirmation".
If the materials planning and control system operates without such confirmations, it can only work on the basis of the delivery dates and quantities in the purchase order. Confirmations, on the other hand, enable the customer to plan more exactly. In the period between the issue of the PO and the planned delivery date he is provided with more up-to-date and increasingly reliable information on the expected delivery.
Project System (PS)
A confirmation is a part of network control. It documents the state of processing for network activities and activity elements. There are two types of confirmations in the R/3 System: partial and final confirmations.
A confirmation is used to record:
the work center where the activity was carried out
the person who carried out the activity
the yield and scrap produced in an activity
the actual values for the standard times
Intellectual Property Management (CRM-IM-IPM)
A report made by the licensee and defined in the rights sale contract on sales volumes or other quantities (such as audience figures for a film) during a period.
Receiving (ECO-BBP-REC)
An electronic document that combines the functions of goods receipts and service entry sheets. By creating a confirmation:
Vendors can confirm that they have fulfilled their orders
Employees can confirm the goods and services they ordered via their shopping baskets
Central goods recipients can confirm the goods and services ordered by employees for whom they are responsible

When i give end location from my location which is selected from the options available, also i receive the message that the directions could not found- pl. help

when i give end location from my location which is selected from the options available, also i receive the message that the directions could not found- pl. help

# Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
# Sign back in, and you will be asked to save the password you entered.
# This will save the password and autocomplete if you have this option turned on.
I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]

Download updates for the lion and I read the writing could not save any of the selected updates. Why?

why after Download updates for the lion 10.7 and I read the writing could not save any of the selected updates and I can't upgrade the software ?

The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps.

TS2830 When I synch my phone or other devices to itunes, I get a message that the following songs could not be synched to itunes because the file could not be converted. However, these are songs that I bought directly from Itunes. Any suggestions?

When I synch my phone or other devices to itunes, I get a message that the following songs could not be synched to itunes because the file could not be converted. However, these are songs that I bought directly from Itunes. Any suggestions?

Hello rafagee,
I understand that you are not able to sync a few songs you purchased from iTunes to your iPhone and other devices. There may be an issue with the file, but if you have the Apple ID and password used to purchase the songs, you can redownload them. You can even download the song directly to your iPhone. I found an article that will give you steps to do this on your computer and on your iPhone:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I am at the most current version of itunes, but when i try to burn a cd i get an error stating disc burner or software not found - any help?

I am at the most current version of itunes, but when i try to burn a cd i get an error stating disc burner or software not found - any help?

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas

I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas?

Hello tcampbell1549,
Thank you for using Apple Support Communities.
For more information, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario

When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

Could not found any usage key in the work center WC001(Use T-CODE CR02)?

Similar Messages

Maybe you are looking for