Could not install DPM agent on Secondry site DPM could not connect to the Service control manager : ID 33221

Hi,
We have two DPM 2012 R2 server installed at Primary and Secondary site Windows 2012 R2 installed.
We need to Protected Primary DPM from Secondary DPM.
When install DPM agent got error from secondary DPM console.
“DPM could not connect to the Service Control Manager on these servers ID: 33221”
Checked till now :
Visual C++ redistributable installed.
Checked DNS A record and both server can ping each other,
Widows Firewall off on both servers.
Net stop mpssvc ( Windows firewall service)
sc \\Server1 query
 àable
to see result
Thanks,

Hi
You mention checking the DNS A record, are these 2 servers not in the same domain? Can you ping -a computername?
Do you have any other AV software that have firewalls built in?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

    Hi,
    We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
    Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service.  Possible causes include: the service is either not installed or the specified service name is invalid.
    Any help is much appreciated.
    Thanks

    Hello,
    The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
    Sean Gallardy | Blog |
    Twitter

  • Hello all, i am in need of the newer version of Mobile Device Support as when updating the file was not installed, would anyone tell me where i could find a new version? thankyou

    Hello all, i recently updated my itunes but when i did this the Mobile Device Support file did not install, would anyone be able to help me find a download? thanks

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I threw up the box before installing photoshop elements 13 and now i can not installed my brand new photoshop because i do not have a serial number

    I threw up the box before installing photoshop elements 13 and now i can not installed my brand new photoshop because i do not have a serial number

    When you buy software, the serial number is really what you're buying, since the software is typically downloadable. So don't throw it away in the future.
    If you registered the software before you threw away your serial number, then Adobe may have a record of your purchase.
    You could try chatting with a Support Agent:
    https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html

  • Updates: "Could not connect to the service"

    Hi,
    Every time I click on the software update button in Ovi Suite it seems to be checking for updates, but after a while I get the message
    Could not connect to the service
    There seems to be a problem with connecting to the Nokia Ovi Suite update service. Make sure that your firewall and virus protection settings are correct. Also, make sure that the menu option for working offline is not selected in Internet Explorer. If you still cannot connect, the service may be unavailable. Please try again later.
    I got a similar message with an earlier version of Ovi Suite, so I uninstalled it and installed version 3.0.0.290 manually, but I am still getting this message.
    Thanks

    There has been a problem with Ovi suite where it has used some old GTE CyberTrust certificates from the pc and those old certificates have expired. If you run a trace on a failed Ovi login using wireshark then you might see something like this:
    10.1.1.3              184.27.103.249        SSLv3    Client Hello
    184.27.103.249        10.1.1.3              TCP      https > 4251 [ACK] Seq=1 Ack=89 Win=5840 Len=0
    184.27.103.249        10.1.1.3              SSLv3    Server Hello,
    184.27.103.249        10.1.1.3              SSLv3    Certificate, Server Hello Done
    10.1.1.3              184.27.103.249        TCP      4251 > https [ACK] Seq=89 Ack=1798 Win=64512 Len=0
    10.1.1.3              184.27.103.249        SSLv3    Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
    184.27.103.249        10.1.1.3              SSLv3    Change Cipher Spec, Encrypted Handshake Message
    10.1.1.3              184.27.103.249        TCP      4251 > https [FIN, ACK] Seq=301 Ack=1873 Win=64437 Len=0
    184.27.103.249        10.1.1.3              SSLv3    Encrypted Alert
    10.1.1.3              184.27.103.249        TCP      4251 > https [RST, ACK] Seq=302 Ack=1910 Win=0 Len=0
    10.1.1.3 ========> Windows XP pc behind router with NAT running Nokia Ovi Suite 3.0.0.290.
    184.27.101.249 ==> server in akamaitechnologies.com domain.
    The SSLv3 Encrypted Alert message in the trace might be related to those expired certificates. The workaround is to manually remove those certificates, but I don't think that has worked for everyone.
    It appears that there might have been some improvements in Ovi Suite 3.1.0.84, which is why satari is recommending to upgrade to Ovi Suite 3.1.0.84. If this works for people here, it would be really useful if those people could confirm, so other people can know if that fixed the problem.

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • Itunes was not installed correctly error 1114.  I have uninstalled and reinstalled using the steps several times., itunes was not installed correctly error 1114.  I have uninstalled and reinstalled using the steps several times.

    itunes was not installed correctly error 1114.  I have uninstalled and reinstalled using the steps several times., itunes was not installed correctly error 1114.  I have uninstalled and reinstalled using the steps several times.
    I have never been so close to packing the whole lot up and sending the ipad back!
    Please help!
    Kieran

    Issues installing iTunes or QuickTime for Windows
    iTunes 11.1.4 for Windows: Unable to install or open
    Troubleshooting issues with iTunes for Windows updates

  • My iphone 4 has a SIM card and lately is saying that it is not installed when it is, and it has a small light in the screen where the card goes into the slot, why is this happening?

    my iphone 4 has a SIM card and lately is saying that it is not installed when it is, and it has a small light in the screen where the card goes into the slot, why is this happening?

    Hi cosmoph1,
    If you are having issues with your iPhone not recognizing the installed SIM, you may find the following article helpful:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Regards,
    - Brenden

  • When I wants to syncronize my foto's from my computer to my Ipad, Ik get the message  "itunes photprocessor was not installed correctly, please reinstall itunes, error 7"  When i did so, the same message appears again and again??????

    When I want to syncronize my photo's from my computer to my Ipad, I get the message  "itunes photoprocessor was not installed correctly, please reinstall itunes, error 7"
    When I did so, the same message appears again and again.
    Anyone knows the solution?
    Thanks on forhand.

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

  • I can not instal some apps on my iPad. For example Dolphin browser. the icone of this app is not activated. Help Help help!

    I can not instal some apps on my iPad. For example Dolphin browser. the icone of this app is not activated. Help Help help!

    As Johnathan has written yes apps for iPhone will work in the iPad, however there is a '+' mark on the icon you touch or click for download which indicates both iPhone AND iPad apps. Those apps will display perfectly for the iPad.

  • I tried to install an app from Channel 4 in the UK and got a message that my account would not allow that. Now I appear to be permanently connected to the UK ITunes Store. How to get back to the USA store?

    I tried to install an app from Channel 4 in the UK and got a message that my account would not allow that. Now I appear to be permanently connected to the UK ITunes Store. How to get back to the USA store?

    Never mind, after about 20 minutes it switched back by itself.

  • Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

    Hi All,
    I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
    Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests.  The http status code and text is 400, Bad Request.
    awebsctl.log file has below errors:
    Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    AWEBSVCs http check returned hr=0, bFailed=1
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    Health check request failed, status code is 400, 'Bad Request'.
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
    Catalog Website is working.
    Thanks & Regards, Kedar

    Hi Jason,
    Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
    IIS Website: Default Web Site
    Port Number: 80
    with default value for Web Application Name configured.
    For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
    Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests.  The http status code and text is 400, Bad Request.
    Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate. 
    Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
    Possible cause: The designated Web Site is disabled in IIS. 
    Solution: Verify that the designated Web Site is enabled, and functioning properly.
    For more information, refer to Microsoft Knowledge Base.
    And awebsctl.log has the below error lines:
    Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    AWEBSVCs http check returned hr=0, bFailed=1
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    Health check request failed, status code is 400, 'Bad Request'.
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    STATMSG: ID=8100
    What should I check from IIS side?
    Application Catalog Website is functioning properly.
    Thanks & regards,
    Kedar
    Thanks & Regards, Kedar

  • HT4796 Can Windows 7 be installed on my new MacBook Pro, through my network connection?  The disc would be in my Windows desktop.

    Can Windows 7 be installed on my new MacBook Pro, through my network connection?  The disc would be in my Windows desktop.

    I wouldn't recommend installing through a network connection.
    For a Virtual Machine:
    If you have the Win 7 media (DVD), use an app like PowerISO or MagicISO to make an ISO file of the install disc and use that.
    For BootCamp:
    Use the original install media and BootCamp Assistant, to install from your DVD Drive.

  • Photoshop elements 12 keeps wanting me to register the product after installing but keeps telling me I have no internet connection or the clock is wrong, why does it keep asking me this? I have register online via the main webpage.

    Photoshop Elements Photoshop elements 12 keeps wanting me to register the product after installing but keeps telling me I have no internet connection or the clock is wrong, why does it keep asking me this? I have register online via the main webpage.

    Hi,
    You need to sign in when using Photoshop Elements 12 as it is the method of activation. If you sign out it deactivates that installation.
    If you are having problems, see if the following helps.
    Sign in, activation, or connection errors | CS5.5 and later
    Good luck
    Brian

Maybe you are looking for