Could not open the file. Not enough memory

I have always used fireworks cs4 normally, but today, i experienced a bit of trouble. there is one png file that when i click to open it the fireworks loads but then a message pops up (could not open the file. Not enough memory) after a bit of researching, i found out that this error happens when i bring to stage one of the common libraries menu bars. (menu bar 4). Does anyone know how to fix this?
ps: I am able to open this file via file-open-*png. Please i really need help. Is the library corrupted maybe?

Hi,
It opened on mine (1.2Gb). I don't think it's a memory issue. I've used FWCS4 with 512mb RAM, never had such a problem. (of course it was very slow at the start, and i used to leave for a cup of coffee first and then come back when it was ready for work. That's why i upgraded to 1.2G .)
Import this menu bar from the common library, save it again as a png and then open it with fireworks the way you did, to see if the same error occurs.
Has this happened with other files as well?

Similar Messages

The Applications File Server could not open the file

Hi All,
We have shared appl_top between 2 nodes.
When running concurrent request such as active user report, i got the following error:
The Applications File Server could not open the file oXXXXX.out for read
I have found metalink note
The Applications File Server could not open the file o611681.out for read (Doc ID 1311372.1)
The $APPLCSF are all fine and so are the permissions.
I found out if i start my primary node first, wait till concurrent manager start, then start second node, it would be ok.
is this recommended practice?
i thought i can start up all node at the same time.
am i right to say that the last node run adautocfg is the primary node?
Thanks in advance

I found out if i start my primary node first, wait till concurrent manager start, then start second node, it would be ok.
is this recommended practice?Do you have PCP implemented? If yes, you do not need to start the CMs on the second node and running adcmctl.sh script on the first node would be enough.
i thought i can start up all node at the same time.What exactly do you start?
am i right to say that the last node run adautocfg is the primary node?Please explain what components are running on each node.
All the URLs Accessing EBS Are Getting Redirected to the Web Node Where Autoconfig Last Ran [ID 1349509.1]
Thanks,
Hussein

I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?

I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardrive

Try repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps.

Could not open the file

I had worked on the Illustrator CC 2014 with 19 slices of PDF presentation file for my assignment even in 15 minutes ago, and before closing it previous time, I have saved the file, and restarted my laptop, tried to open the PDF file again, but the message of "Could not open the file" was appeared each time I have tried to open it. I wonder what is wrong with it. And I do really have to working on it right now. Here I am attaching the pictures and please solve this problem. Thank you

Does it open in Acrobat?
Did it really complete saving? Or did it crash or did you abort the saving process?
In case you can open it in Acrobat, the PDF part of the file is still intact. Then you could create a niew file in Illustrator and place your file in it. Of course then most editing features will be lost, but at least you've got the content.
Use this script to place all pages at once:
Introducing: Open Multi-Page PDF win/mac

Could not open the file in application server

Hi All,
I have a Zreport which will write files on application server. When I tried to download it is showing me "Could not open the file". And when checked again with /nal11 the files does not exist. When I ran the Zreport again the file exist in application server but unable to download. And when checked again the file doesnot exist. Why it is getting archived? Please help me.
Thanks,
Venkata

Hi Sagar,
Below is my file path : /dv2/tmp/instl/salesdata.txt
When I checked in the below path the file exists.
/dv2/tmp/archive/salesdata.txt
Solved the issue.
Thanks,
Venkata

Web Intelligence report scheduling: Error "Could not open the file"

Hello,
we are on BO 4.0 SP9 Patch 1.
Since the update to this patch level we have intermittent failure of scheduled reports in Web Intelligence.
Error message is: "Could not open the file *.wid"
There has been neither a change of the report nor a promotion.
Former schedules finished successful.
SAP note search or SCN search only showed notes with the issue that this error occurs after a promotion.
Does anyone has experiences with this error?

Hi Sebastian,
If Hot Back is enabled I would suggest turning this feature off unless it’s a business requirement.
In addition as a workaround in the reoccurring jobs set the number of retries to something greater than 0.
This issue was fixed in BI4.0 SP08, I would suggest opening an incident with support.
Hope the above helps
~Valdrin

Adobe reader 10.1.2 could not open the file '/C/WINDOWS'

since adobe reader 10.1.2 urls don't work in pdf files to folders.
C:\WINDOWS\xy.xls
ok
C:\WINDOWS
not ok > adobe reader 10.1.2 could not open the file '/C/WINDOWS'
C:\WINDOWS
ok > with deactivated protected mode
no problems with 9.5.0 or 10.1.1 with activated protected mode
is that known? any other workaround?
thanks

Hi,
I also have Reader 10.1.2 installed on my machine and I also cannot open a link in the PDF, that will eventually call an exe file. I don't think that there would be different behaviour on your machine. So, I think, now this is the expected behaviour Reader 10.1.2 onwards.

Could not open the file. An internal error occurred.

Hi,
Anyone can solve my problem? Urgent!
I can't open a png file. Others files was ok, just only one file can't open after save.
It show : Could not open the file. An internal error occurred.
Thanks!

Seems like is corrupted during save or was caused by a Fireworks crash.
Try open with another version of Fireworks.
Linus
Fireworks Project Phoenix Product Manager
www.projectphoenix.io
https://www.facebook.com/groups/fwsingapore/
www.twitter.com/chunwui

Adobe Captivate could not open "the file" Ensure that:

Brand spanking new installation of the trail version of Captivate 5.5.
Try to open a file a client sent to me.
Receive message
Adobe Captivate could not open "the file" Ensure that:
-The files is not open already
- The file is not damanged.
-The hard disk has suffecient available space
-The system has suffeicent resources.
Researched the blog and tried 2 suggestions:
1. Clearing the cache. Did not work. I do not have a cache folder. I haven't created a Captivate 5.5 project. I'm just trying to open a file sent to me.
2. Tried deleted bak file. Didn't work. Captivate 5 keeps recreating the file.
Other facts:
Other people have been able to download the trial version and open the file.
I have Captivate 4 on my machine.
Any suggestions?
Thanks

I'm experiencing about the same problem:
I made a software demo using Macromedia Captivate on computer 1 en sent it by e-mail to computer 2.
On computer 2 I installed a Captivate 5.5 trial and I want to open the file in 5.5.
The file is not locked as far as I know (I right-clicked the file > properties > unlock)
I do have sufficiënt available space and resources. The file contains 135 slides but is not too large as I tried to do the same thing with a 50-slide file > same error message.
I tried creating a new blank project > I copied the slides into the blank project, saved again on a local drive, sent it to computer 2 again, but same error message.
Please help, I'm getting desperate.
Marieke

Adobe reader could not open the file

How do I fix: Acrobat could not open the file because it is either not a support file type or because the file has been damaged?

Open the file in a text editor and report the beginning of the first line.

How can I resolve error message, Linklok could not open the file ?

I have an MP3 subscription download link (with Abraham HIcks) but I am unable to complete the download because I get the error message "Linklok could not open the file".

Please have the site administrator contact us at vibralogix.com as it appears something is not setup correctly with Linklok on their site.

Acrobat could not open the file because it is either not a support

Acrobat could not open the file because it is either not a support file type or because the file has been damaged?

What it means is what it says.
Where is the file from?
What makes you sure that Adobe Reader is the right program to open it?

Not"ASC" then could we open the file D:\temp\saptest.xis in *any* editor?

please see the folllowing link http://help.sap.com/saphelp_46c/helpdata/en/fc/eb3d90358411d1829f0000e829fbfe/content.htm the example had we not taken the file type to be "ASC" then could we open the file D:\temp\saptest.xis in any editor?

i put it once more

RSCRM 085 Could not open the file

HI Guru's,
for two weeks we have trouble on RSCRM BAPI. we have a job which execute the function module to generate a file. yesterday we applied an OSS Note to solved the problem RSCRM164.
But now if i execute my process by the program i have the error RSCRM085 could not open the file.
If i execute the process by the transaction RSCRM_BAPI (with the same parameter) the generation is successfull.
Do you have an idea what problem i have ?
Thanks
CYril

Hello Cyril,
If you regenerate the coding and reactivate the program does it resolve the issue?
Best Regards,
Des

Fireworks CS4: could not open the file. Unknown file type

Hello, this is the second file created with Fireworks CS4 that can't be opened. I'm using the same Fireworks installation that created the file. The file is a 1.2 MB file containing the pages of a draft for a new website.
When I click on the file in Windows Explorer to open it, Fireworks tries to open it, but it can't. Instead, an alert pops up with this message: "Adobe Fireworks CS4 Could not open the file. Unknown file type"
Working with Windows Vista Business, Adobe Web Premium CS4 suite
I already tried opening the file, to no avail, with:
-another computer with Windows XP Pro SP3 and the same Fireworks version
-another computer with Windows XP Pro SP3 and Fireworks CS3
-another computer with Windows XP Pro SP3 and Fireworks MX 2004
Please help.

I tried to find a solution for you by using:
http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=error%20opening%20file&cat=su pport&product=fireworks
but I couldn't find anything. You may want to give it a go :-)
Can you open the file in another program, maybe an earlier version of FWs, or Photoshop or even Illustrator if you have it?
Not sure if there's a configuration folder that needs to be renamed and when FWs restarts it re-writes the config file... that's something to has to be done with DW when 'funny stuff' happens.
That's the best advice I have, I'm sorry :-(
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

Could not open the file. Not enough memory

Similar Messages

Maybe you are looking for