Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

What are the Variables settings, what is the text file’s content, …?

Similar Messages

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them.

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them. I opened & printed the image on my PC using PAINT.NET. No lines appeared. I sent the image to my daughter. She printed it and found no lines. I printed the image using Seahorse on my Mac and the lines still appeared. I used basically the same print settings on Mac and PC.

maahes wrote:
did so now, only now I'm getting a slightly different error: could not find udevd no such file or directory. I checked both grub.cfg's and my mkinitcpio.conf and there's no listing for udevd ....which I've never heard of, so I assumed it was a typo?
For clarification: udev is in the mkinitcpio.
I'm not sure whether I yet have a good intuition for how you have your machine set up, but I suspect you need to include a cryptdevice flag to the kernel in your grub config. The file isn't found because the kernel doesn't know your root directory needs decrypting first.
My setup is an LVM over LUKS over LVM sandwich. To boot into my system, the grub.cfg contains the line:
linux /vmlinuz-linux root=/dev/mapper/cryptvg-root cryptdevice=/dev/mapper/vg-crypt:root rootfstype=ext4 pcie_aspm=force acpi_osi=Linux acpi_backlight=vendor i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 ro
Now, most of those flags don't have anything to do with your problem, but note the cryptdevice. It tells the kernel it's dealing with an encrypted filesystem sitting in a logical volume called crypt on a volume group called vg. The bit after the colon tells the kernel to associate this encrypted filesystem with /dev/mapper/root.
As for how to fix your system, I'm afraid I still feel a bit fuzzy about how your LVM and encrypted layers relate to each other, whether you have LVM over LUKS, or LUKS over LVM, or something else. Was there a particular how-to that you followed?

I was in a car collision and need proof of my location when I called 911. The Police Dept., refused to respond, since there were no injuries. Now, I have a dispute with the other driver who is falsely stating accident happened at another intersection. I

I was in a car collision and need proof of my location when I called 911. The Police Dept., refused to respond, since there were no injuries.
Now, I have a dispute with the other driver who is falsely stating accident happened at another intersection. In addition of calling 911 twice, I also took pictures of damages. Unfortunately, I did not take pictures of the intersection signs.
My AT&T carrier states that this info. can only be disclosed by a subpoena. My insurance carrier states that they will not subpoena this info., since it is a civil case only.
The Police Department does not keep records of calls they do not attend to.
How can I get this location info. from my i phone device if at all possible?
Thanks,
Pecosa
iPhone 4, iOS 6.0.1

Johnathan Burger,
I did take photos of the damages to car and license plates, but NOT the intersection signs.
How do I get the GPS Data in the exit data of photos? Please advise.
Thanks,
Message was edited by: Pecosa
Message was edited by: Pecosa

HT204053 My iPhone 4 will not allow me to sign into iCloud it says there are too many accounts on this device how can I resolve it and sign in?

Please help me sign into icloud

If the message says that the maximum number of free iCloud accounts has already been created, you won't be able to create a new iCloud account on that phone. You can sign into an existing iCloud account, but not create a new one. Your only options are to either re-use one of the accounts previously created or create a new account to use on a different iOS device (running iOS 5 or higher) or Mac (running OS X Lion or higher), if you have one.

Could not parse manifest

I am trying to P2V a physical machine running Solaris 10, the collect phase works, the prepare phase on the target gives Could not parse manifest error, has anybody got a solution to this?

Hmm, SUNWldmp2v is independent of SUNWldm so installing the rest of the 1.3 software probably won't make a difference.
Can you mail me the failing manifest (put @sun.com at the end of my username).
As for upgrading to LDoms 1.3, it should have no impact on your existing configs (but be sure to do backups
in case - see http://docs.sun.com/app/docs/doc/821-0406/upgradeldomssystem?a=view)
You could upgrade SUNWldm now without rebooting and apply the firmware and S10 patches the
next time you have to powercycle the machine.

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

Change of a single line in a text file

Is there a option in CVI to change a single line in a text file (.txt), without reading the whole text file into the buffer and writing the whole buffer back after the editing from the one line?

Not that I am aware of.
I'll be glad to know such a function if somebody can point us to it!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

When installing Server 2008 Datacenter from disc, I get the error message "Windows could not parse or process the unattent answer file for pass [specialize].

This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
EDIT: [Redacted]
EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
second time, it installed fine.
I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
That is when I tried another install of Server 2008 and received this error message about an answer file.
I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
answer file.
I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!

Hi,
As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
I asked "OEM or retail" because of this known issue:
"Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2425962
An answer file may already contain in the disc which causes the issue.
If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
If you have any feedback on our support, please send to [email protected]

Windows 8.1 having same issue: Windows could not parse or process unattend answer file (C:\Windows\Panther\unattend.xml) for pass [specialize]. A component or setting specified in the answer file does not exist.

I know there are similar other issues with IE 10 and Windows 7. This is WINDOWS 8.1, and the IE Welcome message is totally absent from the default unattend.xml in the c:\windows\panther directory. In fact, I did a sysprep without using any injected
unattend.xml - this is the Microsoft Default!
So I suspect this will start appearing all over again soon. Anyone figure out what was causing it?
Here is the new Specialize section from the xml:
<settings pass="specialize">
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-SQMApi" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <CEIPEnabled>0</CEIPEnabled>
        </component>
        <component name="Microsoft-Windows-SQMApi" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <CEIPEnabled>0</CEIPEnabled>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            
            <ComputerName>Win8</ComputerName>
            <TimeZone>Pacific Standard Time</TimeZone>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            
            <ComputerName>Win8</ComputerName>
            <TimeZone>Pacific Standard Time</TimeZone>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
               
                <RunSynchronousCommand wcm:action="add">
                    <Description>Enable Admin Account</Description>
                    <Order>3</Order>
                    <Path>net user administrator /active:yes</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>powercfg -h off</Path>
                    <Order>4</Order>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>5</Order>
                    <Path>cmd /c %WINDIR%\Setup\Specialize_x64.cmd</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
               
                <RunSynchronousCommand wcm:action="add">
                    <Description>Enable Admin Account</Description>
                    <Order>3</Order>
                    <Path>net user administrator /active:yes</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>powercfg -h off</Path>
                    <Order>4</Order>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>5</Order>
                    <Path>cmd /c %WINDIR%\Setup\Specialize_x86.cmd</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
         <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <BlockPopups>yes</BlockPopups>
            <CompanyName>FYM Inc</CompanyName>
            <DisableAccelerators>true</DisableAccelerators>
            <DisableDevTools>false</DisableDevTools>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <DisableOOBAccelerators>true</DisableOOBAccelerators>
            <DisableWelcomePage>true</DisableWelcomePage>
            <EnableLinksBar>false</EnableLinksBar>
            <FavoritesDelete>true</FavoritesDelete>
            <FilterLevel>High</FilterLevel>
            <Help_Page>www.google.com</Help_Page>
            <Home_Page>www.google.com</Home_Page>
            <LockToolbars>false</LockToolbars>
            <MSCompatibilityMode>false</MSCompatibilityMode>
            <NoDial>true</NoDial>
            <ShowCommandBar>true</ShowCommandBar>
            <ShowInformationBar>true</ShowInformationBar>
            <SuggestedSitesEnabled>false</SuggestedSitesEnabled>
            <SearchScopes>
                <Scope wcm:action="add">
                    <DisplayQuickPick>true</DisplayQuickPick>
                    <ScopeDefault>true</ScopeDefault>
                    <ScopeDisplayName>Google</ScopeDisplayName>
                    <ScopeKey>Search1</ScopeKey>
                    <ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
                    <ShowSearchSuggestions>true</ShowSearchSuggestions>
                    <ShowTopResult>true</ShowTopResult>
                </Scope>
            </SearchScopes>
        </component>
        <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <BlockPopups>yes</BlockPopups>
            <CompanyName>FYM Inc</CompanyName>
            <DisableAccelerators>true</DisableAccelerators>
            <DisableDevTools>false</DisableDevTools>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <DisableOOBAccelerators>true</DisableOOBAccelerators>
            <DisableWelcomePage>true</DisableWelcomePage>
            <EnableLinksBar>false</EnableLinksBar>
            <FavoritesDelete>true</FavoritesDelete>
            <FilterLevel>High</FilterLevel>
            <Help_Page>www.google.com</Help_Page>
            <Home_Page>www.google.com</Home_Page>
            <LockToolbars>false</LockToolbars>
            <MSCompatibilityMode>false</MSCompatibilityMode>
            <NoDial>true</NoDial>
            <ShowCommandBar>true</ShowCommandBar>
            <ShowInformationBar>true</ShowInformationBar>
            <SuggestedSitesEnabled>false</SuggestedSitesEnabled>
            <SearchScopes>
                <Scope wcm:action="add">
                    <DisplayQuickPick>true</DisplayQuickPick>
                    <ScopeDefault>true</ScopeDefault>
                    <ScopeDisplayName>Google</ScopeDisplayName>
                    <ScopeKey>Search1</ScopeKey>
                    <ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
                    <ShowSearchSuggestions>true</ShowSearchSuggestions>
                    <ShowTopResult>true</ShowTopResult>
                </Scope>
            </SearchScopes>
        </component>
         <component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <fAllowFullControl>true</fAllowFullControl>
                <fAllowToGetHelp>true</fAllowToGetHelp>
         </component>
         <component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <fAllowFullControl>true</fAllowFullControl>
                <fAllowToGetHelp>true</fAllowToGetHelp>
         </component>
         <component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableWER>1</DisableWER>
         </component>
         <component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableWER>1</DisableWER>
         </component>
        <component name="Microsoft-Windows-powercpl" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
             
             <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
             
             
             
             
        </component>
        <component name="Microsoft-Windows-powercpl" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
             <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
        </component>
       <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
           <Identification>
               <JoinWorkgroup>Workgroup</JoinWorkgroup>
           </Identification>
       </component>
       <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
           <Identification>
               <JoinWorkgroup>Workgroup</JoinWorkgroup>
           </Identification>
       </component>
        <component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
        </component>
        <component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
        </component>
    </settings>
I'm thinking of dumping the entire IE section and see what happens.

I too received this error as I tried to run my first Windows 8.1 deployment. Per another post I commented out this line
<IEWelcomeMsg>false</IEWelcomeMsg>
from the IE section of the unattend.xml. I was then able to run my deployment. I do not see this line in your posting though.
I referenced this link even though it was for Windows 7.
http://social.technet.microsoft.com/Forums/en-US/c41a2b69-a591-4cd3-86ab-6a0f8a73b858/getting-windows-could-not-parse-or-process-the-unattend-answer-file-for-pass-specialize-with?forum=mdt
Hope this helps someone.
JayTheTech
To clarify, I edited the unattend.xml file from from Deployment Share, not C:\Windows\Panther.
DS\control\task sequence ID\unattend.xml
JayTheTech

From an iPhone 5, I receive the following error message when trying to download content from a radio show app: "Alert Could not parse feed." How do I fix?

From an iPhone 5, I receive the following error message when trying to download content from a radio show app: "Alert Could not parse feed." How do I fix?

Since you're using a 3rd party app, suggest contacting the app developer or looking at their support site for help.

Getting "Windows could not parse or process the unattend answer file for pass [specialize]" with IE10 integration? Read this...

Hey guys,
I just discovered an issue with using MDT to integrate Internet Explorer 10 into Windows 7 & 2008 R2 image files. Building the images was no problem at all, but when I tried to deploy them it would bomb with this error every time:
"Windows could not parse or process the unattend answer file for pass [specialize]."
So a very annoying and cryptic error to say the least. Obviously the issue was with the unattend.xml file that gets auto-generated by MDT, but all the items under "specialize" had worked just fine when I built the image and the IE version
was the only item that had changed. After comparing the Windows 7 & Server 2008 R2 unattend.xml files to my Windows 8 & Server 2012 unattend.xml files (because they have IE 10 native) I discovered that the following flag was missing
from the Windows 8 & Server 2012 unattend.xml files:
<IEWelcomeMsg>false</IEWelcomeMsg>
So I simply commented it out like so:
Re-ran my test deployment and viola, 100% successful with zero errors. I was a little embarrassed/annoyed that this took me so long to track down, then I realized others might be struggling with this too so thought I'd share.
Hope my time spent saves someone else some grief!

I know the last reply was from a couple weeks ago, but honestly, I haven't been able to find anything else in the last week of searching Google. I'm new to the MDT process but I'm having the same issue with what you posted. I can shift-F10 during the "Applying
system settings" and open my unattend.xml file and remove the IEWelcomeMsg line and the image deploys perfectly, so I know that's my problem. I can't figure out where that line is coming from. I have edited every unattend.xml file in the Templates folder under
MDT and also the one in my deployment task sequence, but somewhere during that deployment, that one setting gets added back to the unattend file and nukes the whole image. I'm about to pull my hair out. I'm implementing MDT to save time but I feel like the
last couple of weeks trying to get it to work have been a waste. I have thought about backing my reference image back to IE9, but having to deploy IE10 post image seems like it's an unnecessary burden. Any help would be appreciated.
~Adam

Could not parse XMBMessage due to invalid content type for SOAP: TEXT/HTML

Hi all,
   I am working on a SOAP scenario,
the soap body is as follows
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
          <m:MT_test xmlns:m="http://titan.co.in/test">
               <name>String</name>
               <age>String</age>
          </m:MT_test>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
when i tried to request it using XML spy, following error i am getting ,
<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
     <SOAP:Body>
          <SOAP:Fault>
               <faultcode>SOAP:Server</faultcode>
               <faultstring>Server Error</faultstring>
               <detail>
                    <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                         <context>XIAdapter</context>
                         <code>ADAPTER.JAVA_EXCEPTION</code>
                         <text><![CDATA[
com.sap.aii.af.ra.ms.api.DeliveryException: com.sap.aii.af.ra.ms.api.MessagingException: Could not parse XMBMessage due to invalid content type for SOAP: TEXT/HTML
     at com.sap.aii.af.ra.ms.impl.core.queue.consumer.CallConsumer.onMessage(CallConsumer.java:158)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:916)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
          ]]></text>
                    </s:SystemError>
               </detail>
          </SOAP:Fault>
     </SOAP:Body>
</SOAP:Envelope>
the request is coming to xi, when i am monitoring the communication channel in RWB,
i am getting message, "request received, error occured"
this is anew xi server, is ther any configuration need to do.
Please help me.
Regards
Pradeep P N

I'm getting the same error. Please tell me how do i resolve this?
request:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soap="http://soap2soap">
   <soapenv:Header/>
   <soapenv:Body>
      <soap:mt_soapreqsender>
         <years>?</years>
         <interest>?</interest>
         <loan>?</loan>
         <tax>?</tax>
         <insurance>?</insurance>
      </soap:mt_soapreqsender>
   </soapenv:Body>
</soapenv:Envelope>
response:
<!see the documentation>
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>DeliveryException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: com.sap.aii.af.ra.ms.api.MessagingException: Could not parse XMBMessage due to invalid content type for SOAP: APPLICATION/OCTET-STREAM
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:144)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:831)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>

Could not parse XMBMessage due to Can't parse the document

*Dear all,*
*i have a SOAP to RFC Scenario. XML Validation by Adapter is turned on in SenderAgreement.*
*XSD Files are placed in the correct directory. Incoming requests are validated. However,*
*it seems that responses produce an error in the soap adapter.*
*This is the error message i am getting:*
+SOAP:Fault>+
         +<faultcode>SOAP:Server</faultcode>+
         +<faultstring>Server Error</faultstring>+
         +<detail>+
            +<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">+
               +<context>XIAdapter</context>+
               +<code>ADAPTER.JAVA_EXCEPTION</code>+
               +<text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage due to Can't parse the document+
+     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1173)+
+     at sun.reflect.GeneratedMethodAccessor678.invoke(Unknown Source)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:592)....+
*In SXMB_MONI my response includes the following passages*
+- 
+<Trace level="3" type="T">Pipeline Service = PLSRV_XML_VALIDATION_RS_OUT</Trace>+
+<Trace level="3" type="T">Skip Inbound Validation =</Trace>+
+<Trace level="3" type="T">Skip Outbound Validation =</Trace>+
+<Trace level="3" type="T">Area = XML_VALIDATION_OUT</Trace>+
+<Trace level="1" type="T">Reading sender agreement</Trace>+
+<Trace level="3" type="T">Validation Mode = Validation by Adapter</Trace>+
+<Trace level="1" type="T">Outbound validation of response takes place</Trace>+
+<Trace level="3" type="T">Interface Name = SI_xxx_xxx_xxx_Sync_Outbound</Trace>+
+<Trace level="3" type="T">Interface Namespace = http://xxx.de/xxx</Trace>+
+<Trace level="3" type="T">Software Component Version = D390B9E10A6B11DF8C15C7540A484C06</Trace>+
+<Trace level="2" type="T">Java Validation Service Call</Trace>+
+<Trace level="1" type="T">System error occurred during XML validation</Trace>+
+<Trace level="1" type="E">CL_XMS_PLSRV_VALIDATION~ENTER_PLSRV</Trace>+
+</Trace>+
+<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />+
+- 
+<Trace level="3" type="T">Persisting message Status = 023</Trace>+
+<Trace level="3" type="T">Message version 009</Trace>+
+<Trace level="3" type="T">Pipeline CENTRAL</Trace>+
+</SAP:Trace>+
*I see the following error message:*
+<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>+
+- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XML_VALIDATION_OUT">CX_XMS_SYSERR_VALIDATION</SAP:Code>
<SAP:P1>Schema xxx.response.xsd not found in J:\usr\sap\xxx\SYS\global\xi\runtime_server\validation\schema\00000000000000000000000000000000\ u00D3u00B9u00E1 k u00DF u00C7T HL \SI_xxx_xxx_xxx_Sync_Outbound\urnsap-comdocumentsaprfc~functions\xxx.response.xsd (J:\usr\sap\xxx\SYS\global\xi\runtime_server\validation\schema)</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>not used at the moment.</SAP:AdditionalText>
<SAP:Stack>System error occurred during XML validation</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
There seems to be an error in the adapter trying to validate the response. Does anyone has a clue as to why ?

Since i cannot get i running, i helped myself using a java mapping, that i packaged into a jar
along with the xsd files. See code below:
import com.sap.aii.*;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.BufferedReader;
import java.io.OutputStream;
import java.io.OutputStreamWriter;
import java.io.UnsupportedEncodingException;
import java.io.InputStreamReader;
import java.io.Reader;
import javax.xml.transform.sax.SAXResult;
import javax.xml.transform.sax.SAXSource;
import javax.xml.transform.stream.StreamSource;
import javax.xml.validation.Schema;
import javax.xml.validation.SchemaFactory;
import javax.xml.validation.Validator;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
@SuppressWarnings("unused")
public class CustomValidator extends AbstractTransformation {
     public void transform(TransformationInput arg0, TransformationOutput arg1)
               throws StreamTransformationException {
          Validator validator;
          InputStreamReader insr;
          String inputPayloadString;
          try {
               // Trace
               getTrace().addInfo("com.xxx.pi.mapping.validation.CustomValidator called");
               InputStream inputPayloadStream = arg0.getInputPayload()
                         .getInputStream();
               insr = new InputStreamReader(inputPayloadStream);
               InputHeader inpHeader = arg0.getInputHeader();
               String intfName = inpHeader.getInterface();
               getTrace().addInfo("Interface Name is :" + intfName);
               String xsdName = "";
               if (intfName
                         .equalsIgnoreCase("SI_xxx_Sync_Outbound")) {
                    xsdName = "Z_xxx.xsd";
               if (intfName.equalsIgnoreCase("SI_xxx")) {
                    xsdName = "Z_xxx.xsd";
               if (intfName
                         .equalsIgnoreCase("SI_xxx_Sync_Outbound")) {
                    xsdName = "Z_xxx.xsd";
               if (intfName
                         .equalsIgnoreCase("SI_xxxx_Sync_Outbound")) {
                    xsdName = "Z_xxx.xsd";
               getTrace().addInfo("Using schema: " + xsdName);
               if (xsdName.equals(""))
                    throw new StreamTransformationException("Schema für "
                              + intfName + " nicht gefunden.");
               BufferedReader reader = new BufferedReader(new InputStreamReader(
                         getClass().getResourceAsStream(
                                   "/com/xxx/pi/mapping/xsd/" + xsdName)));
               // prepare document validator:
               String schemaLang = "http://www.w3.org/2001/XMLSchema";
               SchemaFactory jaxp = SchemaFactory.newInstance(schemaLang);
               Schema schema = jaxp.newSchema(new StreamSource(reader));
               validator = schema.newValidator();
          } catch (SAXException saxe) {
               throw new StreamTransformationException(saxe.getMessage());
          // validate
          try {
               SAXSource source = new SAXSource(new InputSource(insr));
               validator.validate(source);
          } catch (Exception e) {
               getTrace().addInfo(e.getMessage());
               String trace = e.getMessage();
               throw new StreamTransformationException(trace, e.getCause());
          // Write the response
          try {
               inputPayloadString = convertStreamToString(arg0.getInputPayload()
                         .getInputStream());
               arg1.getOutputPayload().getOutputStream()
                         .write(inputPayloadString.getBytes("UTF-8"));
               getTrace().addInfo("Schema Validierung erfolgreich !");
          } catch (Exception e) {
               throw new StreamTransformationException(e.getMessage());
     // helper to convert to String
     private static String convertStreamToString(InputStream in) {
          StringBuffer sb = new StringBuffer();
          try {
               InputStreamReader isr = new InputStreamReader(in);
               BufferedReader reader = new BufferedReader(isr);
               String line;
               while ((line = reader.readLine()) != null) {
                    sb.append(line);
          catch (Exception exception) {
          return sb.toString();

Windows Could Not parse or process unattend answer file for pass [specialize] after WDT Litetouch 'sysprep and capture'

I setup an ACER VM6620G (Win7x86) how I wanted, including disabling the administrator account and creating an administrator user "PVA"
Navigated to \\wds\DeploymentShare$\Scripts and ran the litetouch script. Chose my "Sysprep and Capture" task.
Everything went off without a hitch until I restarted the technician pc.
I got the dreaded
"Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist"
I tried to deploy the captured image to the same computer and got the same error
I've scoured the internet for solutions (Shift+10 opens command prompt. Good to know!) with no luck.
I've saved the unattend.xml and looked for errors- going as far as to install an x86 Win7 virtual machine to validate the unattend.xml file in WISM
Other information that might be useful:
I never used WISM to create an unattend.xml nor did I attach one to the image.
I didn't try to copy user profiles/settings/migrate etc
I imported the captured image to WDT. Created a standard task and added 2 nodes
-Inject Drivers
-Install Application
As a side, I've got another image that I've already injected the drivers/installed the application as a test. Everything went smoothly.
+-----------------+
| Unattend.xml:
+-----------------+
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>2</PartitionID>
</InstallTo>
<InstallFrom>
<Path>\\10.0.0.1\deploymentshare$\Operating Systems\ACER Win7 x86 Capture\ACER Win7 x86 Capture.wim</Path>
<MetaData>
<Key>/IMAGE/INDEX</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<JoinWorkgroup>WORKGROUP</JoinWorkgroup>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName>PVA-PC</ComputerName>
<RegisteredOrganization>PVA</RegisteredOrganization>
<RegisteredOwner>PVA</RegisteredOwner>
<TimeZone>"Eastern Standard Time"</TimeZone>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>about:blank</Home_Page>
<IEWelcomeMsg>false</IEWelcomeMsg>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>disable user account page</Description>
<Order>3</Order>
<Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value></Value>
<PlainText>true</PlainText>
</AdministratorPassword>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain>.</Domain>
<Password>
<Value></Value>
<PlainText>true</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
</OOBE>
<RegisteredOrganization>PVA</RegisteredOrganization>
<RegisteredOwner>PVA</RegisteredOwner>
<TimeZone>"Eastern Standard Time"</TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
</unattend>

https://skydrive.live.com Here's the end of the log file:
2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info Also, here's my [Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
SkipDomainMembership=YES
DomainAdmin=Administrator
DomainAdminDomain=go.local
DomainAdminPassword=************
SkipTimeZone=YES
TimeZone="035"
TimeZoneName="Eastern SkipLocaleSelection=YES
KeyboardLocale=en-US
UserLocale=en-US
UILanguage=en-US
Bootstrap.ini:
[Settings]
Priority=Default
[Default]
DeployRoot=\\10.0.0.1\Dep UserID=Administrator
UserDomain=go.local
UserPassword=***********
KeyboardLocale=en-US
SkipAdminPassword=YES
SkipProductKey=YES
SkipBitLocker=YES /redir?resid=55C3109D61329D02!108&authkey=!AG793wDwQuFZa1s
CMI CBS_Core_Finalize:Calling cbs core finalize complete
CMI Callback_CMI_ConfigInstall: CBS startup processing re-run complete.
[0x030023] CMI Callback_CMI_ConfigInstall: Exit.
[setup.exe] UnattendSearchExplicitPath: Found unattend file at [C:\windows\Panther\unattend.xml]; examining for applicability.
[setup.exe] UnattendSearchExplicitPath: Found usable unattend file for pass [specialize] at [C:\windows\Panther\unattend.xml].
IBS Callback_Unattend_InitEngine:Using unattend file found at [C:\windows\Panther\unattend.xml].
[setup.exe] ValidateSMIPass: serialized settings stream; status 0x00000000
[setup.exe] ValidateSMIPass: construct settings context; status 0x00000000
[setup.exe] SMI data results dump: Source = Name: Microsoft-Windows-IE-InternetExplorer, Language: neutral, ProcessorArchitecture: x86, PublicKeyToken: 31bf3856ad364e35, VersionScope: nonSxS, /settings/IEWelcomeMsg
[setup.exe] SMI data results dump: Description = Setting is not defined in this component.
[setup.exe] ValidateSMIPass: load SMI settings; status 0x00000001
[0x060432] IBS The provided unattend file is not valid; hrResult = 0x80220001
[0x060565] IBS Callback_Unattend_InitEngine:The provided unattend file [C:\windows\Panther\unattend.xml] is not a valid unattended Setup answer file; hr = 0x1, hrSearched = 0x1, hrDeserialized = 0x0, hrImplicitCtx = 0x0, hrValidated = 0x1, hrResult = 0x80220001
IBS UnattendErrorFromResults: Hit an unattend error; dumping any info we have about the failure...
IBS UnattendDumpSetting: ------Unattend setting error / warning------
IBS UnattendDumpSetting: Error code = 0x80220001
IBS UnattendDumpSetting: Pass = specialize
IBS UnattendDumpSetting: --------------------------------------------
IBS UnattendErrorFromResults: Error text = Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.
[0x0600c2] IBS Callback_Unattend_InitEngine:An error occurred while finding/loading the unattend file; hr = 0x1, hrResult = 0x80220001[gle=0x00000490]
IBSLIB PublishCriticalError: Publishing blocked message [Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.]
This installation is blocked from completing due to compliance failures or invalid input; this is not an internal error.
customsettings.ini as I think it changes the unattend?
Standard Time"
loymentShare$

Windows could not parse or process unattend answer file (c:windows\panther\unattend.xml). Error message during setup.

I'm having an issue, with Windows 8.1 sysprep WIM, when applying the image and don't know what to do.
I am using the Windows 8.1 WADK/Windows Kits for Windows 8.1. Using the Image Manager for creating my answer file, using deployment/imaging tool for creating and editing my images, and using the same Windows 8.1 DVD media for my catalog as in my WIM. No MDT
involvement.
Using WinPE to clean and partition my disk and to apply the image.
I have done the best research I'm able to do at the moment and for this issue it all comes back to removing/editing the "IEWelcomeMsg" line.
I have left at false and removed the line as all have mentioned, however I'm still getting the error "windows setup: windows could not parse or process unattend answer file (c:windows\panther\unattend.xml). A component or setting specified in the answer
file does not exist".
Is there something I missed? From what I can tell for now, nope.
Any help to enlighten what might have been over looked would be beneficial.

Hi JFrederick,
Please try what Tripredacus suggested first.
For the error message, we have a similar thread for reference:
Windows
Could Not parse or process unattend answer file for pass [specialize]
The cause might be different, you may refer to the others who offered suggestions in the above thread.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

Similar Messages

Maybe you are looking for