Could not start transport control program tp while releasing the TR
Hello experts,
i have a problem if any one phase this kind of problem & if u know the solution please share to me its urgent
problem in Development system ,for this i had updated kernel , TP patch level , R3trans patch level in development and quality system , but still the problem is occurring in development system . while releasing the Transport Request this error is coming that too not in frequently some times it is happening some times it not happening ( some times its working fine )
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An
error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway
Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then
execute the command again.
please suggest me what can i do for better , how can i resolve this issue
Thanks & Regards,
Narasimha
Hello experts ,
Last one and half month on-words we are phasing some problems on STMS
while releasing the Transport Request getting this error messages on
status-bar
1. "could not start transport control program tp"
2. while importing the TR into quality system getting this error message" RFC Error :timeout during allocate/CPIC-CALL "
3.while forwarding the TR from QAS to PRD : " RFC Error :timeout during
allocate/CPIC-CALL "
after continues refreshing,we are able to release the request and importthe request into quality system. But after some time again same problem
coming
for this we did the kernel upgrade , tp , & R3trans update and STMS RE-
Configuration etc...But no use with this we got the same problem after
finishing all these workaround , but don't know what happened after 2-3
days STMS starts working fine DEV-QAS-PRD ,
Now we are in the same problem after continues refreshing,we are able torelease the request and import the request into quality system. But after
some time again same problem coming
please suggest us what could be the reason behind this & what we can do
for better
Similar Messages
-
Stms Error Could not start transport control program tp
Hi Experts,
We have installed new system and trying to configure STMS, but we are facing Issue like " Could not Start transport control program tp ". Can anyone please suggest us how to continue further...
Tasks we have done :
1. Upgraded kernel, tp , r3trans to latest.
2. Added Dbms_type = mss in Environmental variables
3. Reconfigured STMS by deleting old one..
Thanks in Advance...
Regards,
Krishna.MHi Benjamin,
We have checked for Authorizations to the dirve, we are having full authorizations also host file entries are correct, but we are unable to find the dev_tp trace file. Can you please tell me where can i find that file. For more information please find the image....
Please suggest me how to resolve the issue..
Regards,
Krishna.M -
Could not start transport control program tp
Hi all
when i am trying to see the TP Parameters i am getting the below error:
System DV2 Command TMS_MGR_READ_TPPARAM
Client 000 Service Transport Service
User TMSADM Start Online
Date 10/18/2008 Function TMS_TP_READ_TPPARAM
Time 12:03:39 Message TP_CALL_FAILED
Could not start transport control program tp
RFC error: Error when opening an RFC connection
and in SMGW i am seeing the below error:
Sat Oct 18 11:09:33 2008
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >/usr/sap/DV2/DVEBMGS00/exe/tp< [gwr3cpic.c 6135]
ERROR => GwISearchPartner: HOST: hostname, conv ID: 60516439 [gwr3cpic.c 6148]
please help me to solve this.
Thanks:
GiridharHi Giridhar,
I think its a cpic timeout occurring before reading tp could start. Please check the parameter gw/cpic_timeout in your system. The default may be 20 sec for this parameter.. You can consider it increasing to 60 sec.
https://service.sap.com/sap/support/notes/638701
Regards,
Debasis. -
SMLT Could not start transport control program tp
Hello.
I want to install language on fresh system ERP 2005 SR2. Platform is AIX and Oracle. In SMLT i get error:
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
trace from SMGW:
Fri Sep 7 15:22:10 2007
ERROR => GwISearchPartner: timeout, partner LU: >sapdb2<, TP: >/usr/sap/TR3/DVEBMGS01/exe/tp< [gwr3cpic.c 5842]
ERROR => GwISearchPartner: HOST: sapdb2, conv ID: 58517568 [gwr3cpic.c 5855]
Fri Sep 7 15:22:12 2007
ERROR => GwIConnectHandle: conversation 58517568 not found
(lu=sapdb2 , tp=tp , host=sapdb2) [gwxxrd.c 7762]
I have update the kernel and tp to the newest version.
Can anybody help me to solve this problem ?
Thanks.I found problem in TCP/IP RFC connection CALLTP_AIX :
I tested it several times, and sometime it returns error:
Logon Cancel
Error Details timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout bei
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host sapdb2 / sapgw01
Error Details DETAIL: no connect of TP /usr/sap/TR3/DVEBMGS01/exe/tp from host sapdb2 after
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 192
Error Details MODULE: gwr3cpic.c
Error Details LINE: 5873
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Fri Sep 7 16:04:55 2007
Error Details VERSION: 2
Also report RSTPTEST somitemes return problem in step RFC ping:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout beim Verbindungsaufbau (Partner vorhanden ?)
Message was edited by:
Evgeniy Druzkin -
"Your disk could not be partitioned" "An error occurred while partitioning the disk"
hello, i am operating on a model a1286 mbp mid 2009 laptop, with 4 gb ram 360 gb hdd,
snow leapord updated to maverick,
bootcamped w/ win 7 32-bit
i tried in mac os x maverick to use bootcamp assistant to partition my bootcamp 180 gb partition to be erased and then to start the install of 64-bit.
the partitioning was stuck at about 17 percent for an hour, so i quit the bootcamp assistant - ive seen on reddit this was a bad thing to do, but i did it anyway because i saw someone posted about being to reboot and do a hdd repair then reboot and try to partition again
now when i startup my rEfit program that shows me option of loading mac os x maverick or Bootcamp Legacy Os instead of bootcamp win 7 32-bit
when i tried partioning again its asking me to free up space for 28 gb in bootcamp assistant , i did that, inserted win 7 64-bit dvd install and hit continue dialogue button in bootcamp assistant
this is where i see i only have 145 gb used in mac os x with 18 gb free and in the windows side 14 gb
status partitioning disk,
but then i get an error message saying the partition failed with errors
i googled and saw i had togo into single user mode by pressing cmd-s during boot and typing /sbin/fsck -fy
i got a msg saying this command function is not recognized. - along those lines
how do i reboot and start a repair of the disk?
also i did a repair file permisions in disk utility but forgot to put back the power cord, so the battery drained and i assume the repair file permissions didnt finish and the mbp just auto shutdowned
is there a command i could enter into the EFI shell? or single user mode? to repair the hdd partition in the mac os x maverick and the bootcamp legacy os side since the first time i tried erasing everything on the win 7 32-bit side bootcamp assistant got stuck at 17 percent partitioning then I voluntarily quit the program = now i cant partition bca gives me error of:
"Your disk could not be partitioned" "An error occurred while partitioning the disk"
thanks in advance,
-rIs that the complete error message? Are you trying to partition the correct drive? It may be that you do not have enough contiguous free space on the drive for the partition.
-
C:\Windows\SysWOW64\vidperf.dll The path could not be found? What does this mean? How do I re-install this packet and eliminate this error message?
Dell Laptop inspiron 1525 with Windows 7 Premium with open rights.P
Just to eliminate the possibility please run Malwarebytes
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag -
Error: Test call of transport control program (tp) ended with return code 0
Hi Experts,
When we are trying to transport Request.
Error: Test call of transport control program (tp) ended with return code 0208
in STMS what are the steps to fallow to just back up the code.
Any Solutions is Greatly Appreciable...
Thanks in Advance,
Ram,Hi,
a)If your system is UNIX check /usr/sap/trans is mounted or not?
b)After configuring TMS did you save and activate?that can be one reason.
c)tp might be corrupted.u need to upgrade your tp. (or you can upgrade to the latest kernel)
Please check the below link
could not start transport control program tp
However as suggested by NIbu, you should restart the server once before doing any other checks
Thanks
Debdeep
Edited by: Debdeep Ray on Jul 13, 2009 4:28 PM -
Transport control program tp could not be started
Hi,
While importing a request to Quality Server , transport terminates with an error "Transport control program tp could not be started" RFC error.
Function TMS_TP_IMPORT
Message TP_CALL_FAILED
Tp output says "This is tp version 340.16.37 (release 640)
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBSWPATH is no longer used."
340.16.37.kernel release 640,patch number 193.
RSTPTEST was successful .
Changed auth/rfc_authority_check to value '0' in the profile and restarted.
user id provided in RFC connection is TMSADM and the user is
having "S_RFC" authorization object.
This error started after putting the oracle patchset 9.2.0.8.
SAP version 4.7, Oracle 9.2.0.8, on AIX 5.2
It will be appreciable if any one can help me out in this issue.
Regards,
Saji KumarHi,
provide result for
tcode - stms_import -> import queue -> check -> transport tool
also execute RSTPTEST report on QAS,
RFC error indicate problem in RFC connection , check it using SM59
regards,
kaushal -
Could not start program with Version 8.0.25010
After I updated version 8.0.25010 I could not start the program and screen shows a warning " NtlmWebAuthException:2"
Hi Kevin,
Thank you for posting in Windows Server Forum.
If possible please try to reinstall and then check the result. Apart from that, have you make any changes related to connection setting on server side? Have you provided RD Gateway address or you are connecting directly?
The remote PC might only allow PCs to connect that have Network Level Authentication set up. For more info, see
What types of Remote Desktop connections should I allow?
For more information refer below article.
Remote Desktop Client on iOS: FAQ
http://technet.microsoft.com/en-us/library/dn473015.aspx
Hope it helps!
Thanks.
Dharmesh Solanki -
I can't publish a folio into my DPS Professional Account.
This is the error message:
An error has occurred while trying to publish your folio.
We could not start this operation. Please try again later.
Anyone can help?
TksHi,
It seems there is something wrong with your sign up process, sorry for the inconvenience, this is technical forum, the account issue is out of our range, please follow steps below to contact with azure support, it's a best choice for you.
Get the support channel at:
http://www.windowsazure.com/en-us/support/options/
If you have any other concern, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi Experts,
When I am installing Oracle client 32 bit software on Windows 7 32 bit I am getting error as "could not find main class program will exit"
I have tried installing latest Java software 7 also JDK 1.6.0_34 still I am getting the same problem below is my " oraparam.ini " details
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.xml
LICENSE_LOCATION=
BOOTSTRAP_COMPS="oracle.swd.oui:11.1.0.6.0,oracle.swd.oui.core:11.1.0.6.0,oracle.jdk:1.5.0.1.1"
JRE_SCRATCH_LOC=jdk/jre
JRE_MEMORY_OPTIONS=" -mx96m"
DEFAULT_HOME_LOCATION=product\11.1.0\client
DEFAULT_HOME_NAME=OraClient11g_home
NO_BROWSE=/net
NLS_ENABLED=TRUE
BOOTSTRAP=TRUE
EXT_JLIB=../stage/ext/jlib
OUI_VERSION=11.1.0.6.0
## JRE_VERSION is only for Windows. This is to copy accessbridge dlls
JRE_VERSION=1.4.2
ACCESS_DIR=../install/access
#SHOW_HOSTNAME=ALWAYS_SHOW shows the hostname panel always
#SHOW_HOSTNAME=NEVER_SHOW does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW shows the hostname panel on condition
SHOW_HOSTNAME=NEVER_SHOW
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
SILENT_VARIABLE_VALIDATION=TRUE
[Generic Prereqs]
MIN_DISPLAY_COLORS=256
[IMAGES]
FILE1=images/billboards.gif
LICENSE_LOCATION=license.txtDuplicates of the other two times you asked this question:
https://forums.oracle.com/thread/2559093
https://forums.oracle.com/thread/2558027
(and this time, your question does not appear to have anything to do with this particular forum space, either)
Duplicate is locked.
Do not EVER multi--post. That is extremely bad forum etiquette. -
I have a iphone3GS. It could not be boot up. When i press the sleep/wake button, the apple logo appear and then disappear. The password login screen didnt' come on. When i tried to connect my phone to the itune on my laptop, there isnt this button that i can sync my phone with the laptop.
Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
http://support.apple.com/kb/HT1808
Hope this helps
- Greg -
Transport control program tp ended with error code 0212
Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
service: transport service
start : online
Function: TMS_TP_SHOW_BUFFER
message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t : Test. All database changes are rolled back.
-t4 : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory -
Hello Expert,
My SAP System environment as follow
SAP Product : SAP NetWeaver 04
Operating System : Windows 2003 32 bit
SAP Database : MS SQL 2005 32 bit
I have installed SAP NetWeaver 04 system with system copy option. I have installed Application server & Database server on different physical server. App server : SSC2PAS3SFWBW and Database Server : SSC2PAS3SFSQW1.
After SAP NetWeaver 04 installation with system copy I have done TMS configuration with virtual system for a test, It is working fine but while releasing request form SFD system (Development system) it get error “Test call of transport control program (tp) ended with return code 0200. Message no. TK094”
I have reconfigured the TMS and check but it can’t help. TR gets release and import with OS level but at SAP level it gets error.
Trans --> Log
1 ETP199 ######################################
1 ETP199X######################################
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP101 transport order : "SFDK905838"
1 ETP102 system : "SFD"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "340.16.72" "640"
1 ETP198
2EETP128 No target system defined. "SFDK905838" is not a transport request.
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP110 end date and time : "20140602150208"
1 ETP111 exit code : "12"
1 ETP199 ######################################
Steps for Reconstruction
# Upgraded latest SAP Kernel Non-Unicode 640_Rel Patch level 404
# Reconfigured the TMS
# Full User Permission has been set to all SAP Directory.
Rgds,
AshokHi Ashish,
I have removed virtual system form TMS and configured with Development & Production system, but the same error. Not able to release TR.
SLOG as below.
ERROR SFDK905832 SFD f 0012 20140602090930 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602093923 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602094059 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602102854 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602103633 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602104142 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602111140 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602112723 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113109 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113704 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113722 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113753 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113809 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905834 SFD f 0012 20140602125959 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905834 SFD f 0012 20140602130035 default_user BASIS@ORIGIN SSC2PAS3SFWBW
START EXPORT PREPARATION SFD e 20140602132917 sfdadm SSC2PAS3SFWBW 20140602132916001358
START tp_getprots SFD E 20140602132917 sfdadm SSC2PAS3SFWBW 20140602132916001358
STOP tp_getprots SFD E 20140602132920 sfdadm SSC2PAS3SFWBW 20140602132916001358
STOP EXPORT PREPARATION SFD e 20140602132920 sfdadm SSC2PAS3SFWBW 20140602132916001358
ERROR SFDK905836 SFD f 0012 20140602133526 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905836 SFD f 0012 20140602133540 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602144313 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602144350 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602144430 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602150202 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602150208 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603080634 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603081006 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603083952 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603084005 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603091608 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603091617 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905842 SFD f 0012 20140603091826 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603093805 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603101944 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603102709 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603114753 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603121948 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603122039 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603123438 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603135937 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603140114 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603140233 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603140339 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603141743 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603150924 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603152403 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603152753 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603153518 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162013 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162544 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162639 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162755 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603163347 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603163740 default_user A559420 SSC2PAS3SFWBW
Rgds,
Ashok -
Transport control program tp ended with error code 0211
Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
HarryDear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry...
Maybe you are looking for
-
Is there a way to import commercially purchased DVD Movie to my iPod?
Is there a way to import commercially purchased DVD Movie to my iPod? I tried the "Import" function and that didn't work. Is there a function to convert and import or is there a program that might accomplish this? Thanks in advance. Chuck Manetta
-
I am using Mandriva Linux now. But I am using Firefox 3.6.8, but I cannot install java plugin in it. Can anyone please help me how to install it?
-
"value cannot have more than 0 decimal places" error
CRM gurus, Whenever I try to create a Counter, I receive the following warning which doesn't allow me to do anything further.. "<b>value cannot have more than 0 decimal places"</b> I first received this when I tried to assign a counter to a product i
-
Iphoto crashes, when editing keywords and sometime when viewing photos.
*So my iphoto keeps crashing every few minutes as I add the keywords to my photos. Not too sure what to do...here is my crash report.* Process: iPhoto [21812] Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto Identifier: com.apple.iPhoto Version:
-
I just updated to OS X 10.9 and I tried connecting to the internet and it said that the passwords wrong and it dident have a IP address I tried the diagnostics for wi-FI and restarting it but nothing's working please help me with this problem