Could someone provide the link to where the SQL test can be taken online ?

Good morning,
Apologies for the lame question. I did search!
I read in another thread in this forum the following:
>
The SQL test you can take online, which should allow you to take it as soon as you're ready.
>
After some googling and looking around in the Oracle web site. I can't find the page where the SQL test can be taken.
If someone would be so kind to provide the link, I'd very much appreciate it.
Thank you.
John.

Hi John,
440bx - 11gR2 wrote:
I read in another thread in this forum the following:
>
The SQL test you can take online, which should allow you to take it as soon as you're ready.
>
After some googling and looking around in the Oracle web site. I can't find the page where the SQL test can be taken.
If someone would be so kind to provide the link, I'd very much appreciate it.In regards with the above I can just say that, 'online' perahps meant that the exam is computer-based which can be taken from any PV centre or at Oracle centre. That is what I know about the exam coz I don't think you can take exam from home as Oracle/PV is very strict regarding their policies to avoid any case of cheating and doesn't allow the candidates to carry anything, including wallet while taking exam at any PV centre.
Regards,
Sree

Similar Messages

  • Please could someone confirm the Graphics card needed to support a Eizo ColorEdge CG275W monitor, resolution 2560x1440

    Hello, community, Please could someone confirm the Graphics card needed to support a Eizo ColorEdge CG275W monitor, resolution 2560x1440. I currently have a Mac Pro with a NVIDIA GeForce 7300 GT VRAM (Total):          256 MB, which I'm guessing by it's age will not handle the new monitor. Any advice greatly appreciated.
    Kindly Andrew Nash

    https://discussions.apple.com/message/5024326#5024326
    I would dump the 7300GT regardless and get the ATI 5770 $249
    Apple ATI HD 5770
    5770 in the 2006 Mac Pro

  • Could someone  send the BUSINESS BLUEPRINT for FICO?

    Could someone send the BUSINESS BLUEPRINT documentation for FI-CO and specifically CO  and Cost Center Accounting, Profit Center Accounting, Internal Orders and COPA(profitability Analysis)
    Please send it over to [email protected]
    Your help would be really appreciated. I would be very generous in assigning full points.
    Awaiting your replies.
    Thanks & Regards,
    Sandeep

    hi
    Cost Centre Accounting
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COALE/COALE_ALE_060.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COOMCCA/COOMCCA.pdf
    Profit centre accounting
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/ECPCA/ECPCA.pdf
    Internal Order
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COOMOPA/COOMOPA.pdf
    COPA documentation
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPA/COPA.pdf
    nagesh

  • Can anybody provide the SQL query to find the files uploaded in a particular folder?

    Hi All,
    Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
    GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
    Any help is greatly appreciated.
    With best regards,
    Nevin

    Nevin,
    Be great if we could know the version of Portal. For Rel. 1, here's the query
    select id,masterthingid from wwv_things
    where siteid = &site
    and cornerid = &corner
    &site - Content Area id
    &corner - Folder id
    if you don't know the folder id, use
    select id from wwv_corners where siteid = &site
    and name = &folder
    Hope this helps. I have run into this situation before. Usually, the culprits were
    one of the following:
    1. Junk Characters in description of item (caused due to Copy-Paste)
    2. Special Characters in the File name
    Hi All,
    Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
    GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
    Any help is greatly appreciated.
    With best regards,
    Nevin

  • HT1338 Just got an Apple and totally new to this system please could someone tell me how and where I can connect my HP Photosmart 3310 for wifi? Thanks, Mike

    Just got an Apple and totally new to this system please could someone tell me how and where I can connect my HP Photosmart 3310 for wifi? Thanks, Mike

    Welcome to Apple Communities
    Start the printer, go to System Preferences > Print and Scan, press the + button and select the printer. Your printer and Mac must be connected to the same Wi-Fi

  • Wndows could not start the SQL Server (MSSQLSERVER) service on Local computer

    I have 2 instance of SQL Server in same server. A is installed first and B next.
    Somehow A cannot start at all when I try to start from Windows Services.
    B can be started normally.
    A worked normally week ago. There has been only one thing what I may have to server since that.
    I have installed MondoDB. Currently MondoDB it is stopped. 
    windows could not start the SQL Server (MSSQLSERVER) service on Local computer
    Error 31: A device attached to the system is not functioning.
    Kenny_I

    I don't see anything special in event logs.
    Data file of both SQL Server instance are located on same C drive of same server.
    Kenny_I
    Hello Kenny,
    The main issue is not related to SQL server .SQL is at receiving end its hardware or the cables ( not sure which one) are the one causing issue.
    I serached
    http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/111da2ae-0a86-41a5-ba03-7d1c0cc91ea9/windows-error-code-31a-device-attached-to-the-system-is-not-functioning-properly?forum=wdk
    http://www.chicagotech.net/netforums/viewtopic.php?f=1&t=6467
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • How could I find the SQL statement who get this message ?

    ORA-01555 caused by SQL statement below (Query Duration=11191 sec, SCN: 0x0854.723b9c32)
    ... How could I find the SQL statement who got this message ?
    Thanks, Paul

    ORA-01555 means that the UNDO/ROLLBACK space is not large enough.
    This occurs because the SELECT statement is attempting to read the UNDO, but the UNDO has been released (transactions have committed or rolled back) and reused.
    The following are SOME of the reasons I have seen this to occur:
    1) Updates in a loop, with commits happening in the same loop
    - this will mark the UNDO available quickly and quickly reuse it. Then when the SELECT wants to rebuild a block, the UNDO used to rebuild the block has been reused (solution, make the UNDO bigger)
    2) A SELECT cursor used to control a loop in which updates are performed, and a 'done' flag is marked against the current cursor record, and commits are performed at the end of each loop, prior to fetching the next record
    - same problem as above, but it hits the current process. Same solution
    3) A 'month end' activity spike occurs, and all sorts of transactions create updates. There is a report that reports the activity - amusingly it needs to start at the beginning of all the work and updates periodically by doing a huge SELECT up front. This is then used to drive a loop which attempts to get information from the various transactions that have been updated and committed. After a while, the SELECT gets an ORA-01555
    - same problem as above and same solution. Get a bigger UNDO segment.
    You say this only happens once a month. That should give a hint.
    I wouldn't bother with which SELECT statement, as much as which APPLICATIONs are being run when it happens.
    One way around this - use 10g and set the guaranteed retention period. All sorts of other things will break, by no more 1555. <g>

  • How do I get my money refunded?  I am not getting what I want from this, cannot email anyone for help, cannot get someone on the phone I can understand, and keep getting disconnected.  I just want my money back.

    How do I get my money refunded?  I am not getting what I want from this, cannot email anyone for help, cannot get someone on the phone I can understand, and keep getting disconnected.  I just want my money back.

    "this" being what?  You posted in the Workspaces.acrobat.com forum, which is a free service.
    If you subscribed to any of the paid services see Cancel your membership or subscription | Acrobat.com online services

  • Could someone add this link to the announcement

    Sorry to be annoying again regarding the announcement, but could someone please add the link Francois provided in A very good article about Forms tunning to the Announcement in the Forms Forum: http://forums.oracle.com/forums/ann.jspa?annID=432
    thanks

    Whow, that was quite fast. Thanks again.

  • Could anyone provide the complete manual of SAP Query Creation

    Hi,
    Now I am learning to create SAP Query.
    I viewed many questions and answers about SAP Query.
    Some mentioned this,and some did that...
    Could anyone provide a complete manual of SAP Query Creation for developers.
    I can create SAP Queries step by step with it.

    http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
    http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
    Step-by-step guide for creating ABAP query
    http://www.sappoint.com/abap/ab4query.pdf
    ABAP query is mostly used by functional consultants.
    SAP Query
    Purpose
    The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
    Features
    SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
    All the data required by users for their lists can be selected from any SAP table created by the customer.
    To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
    ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
    To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
    use either SQ02 ans SQ01
    or SQVI tr code
    for more information please go thru this url:
    http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
    http://goldenink.com/abap/sap_query.html
    Please check this PDF document (starting page 352) perhaps it will help u.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
    check the below link will be helpful for u
    Tutorial on SQVI
    once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
    useful
    http://www.erpgenie.com/abap/code/abap47.htm
    regards,
    Prabhu
    reward if it is helpful

  • Could you provide the step by step for STO Plant2Plant and Sloc2Sloc

    Hi Guru,
    Could you provide me the step by step for STO Plant to Plant and Sloc to Sloc?
    I'm trying to set configuration and test these scenario but there are something wrong.
    So I would like you guide me all steps. Thank you very much.
    Regards,
    Saiya

    Please check this answered link:
    STO
    STO
    Edited by: Afshad Irani on Apr 27, 2010 7:46 PM

  • Could someone explain the select comparison

    I am supposed to compare inputs on 2 numeric controls and if they are equal they will turn on an LED. I figured out how to do it with the = sign but I am supposed to use the select comparison. Could someone please help me?
    Solved!
    Go to Solution.

    No, you would not have to have another front panel Boolean to use the Select function. You could directly wire the results of anything that returns a True/False. You can also use block diagram constants.
    Message Edited by Dennis Knutson on 01-20-2010 09:47 PM

  • Could someone explain the Factory Method Design Pattern

    Hi Experts.
    Could someone please explain for me the Factory Method Design Pattern. I read it a little and I understand that it is used in JDBC drivers but i'm not clear on it.
    Could someone explain.
    Thanks in advance
    stephen

    Basically, you have one class that's sole purpose is to create instances of a set of other classes.
    What will usually happen is you have a set of related classes that inherit from some base class. We'll say for example that you have a base class CAR and it has sub-classes FORD, GM, HONDA (sorry Crylser). Instead of having the user call the constructors for FORD, GM, and HONDA, you can give the user a Factory Class that will give him a copy. We'll call our factory class Dealership. Inside dealership, you can have a static function :
    public static Car makeCar(String type)
    if(type.equals("FORD")
    return new FORD();
    else if(type.equals("GM")
    return new GM();
    else if(type.equals("HONDA")
    return new HONDA();
    So when the user needs a car, they will just call
    Dealership.makeCar("FORD").
    This is a good way to hide the implementation of your classes from the user, or if you require complex initialization of your objects.
    Another good example of this is in the Swing library. To get a border around a component, you call static methods on BorderFactory.
    Hope this helped.
    Ed

  • HT1657 I rented a movie but had to interrupt the download as I was not near a Wi-Fi hot spot for a period of time.  I boarded a plane and then could not watch the movie.  Can I get a credit for the rental since I was not able to watch it?

    I was downloading a rented movie but could not finish the download before I had to board a plane.  I went to play the movie on the plane but received an error message and could not watch it.  I was charged for the rental.  Can I get a credit?

    Personally I would raise the problem with iTunes Store Support via:
    https://expresslane.apple.com
    You can also Report a Problem via the link in your Purchase Invoice e-mail or from your iTunes account Purhcase History by logging into your Account Settings in iTunes on a computer.

  • Please provide me link from where I can download IAS 10.1.3.4.0

    Hi,
    Please provide me link to download IAS 10.1.3.4.0 version..
    Thanks
    Sukumar

    It is patch number 7272722. Here is the link to download:
    http://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=7272722
    Thanks
    Shail

Maybe you are looking for