Counter output 2V when using gate and source at the same time..

I'm using NI TIO-6601.
I connected output of counter_0 to pfi 34 and pfi27 on hardware(CB-68LP).
pfi 34 is used for gate to counter_1 and counter_2.
With this gate, counter_1 and counter_2 generate pulse trains when the gate is in high state.
pfi 27 is used for source to counter_3.
With this source, I'm trying to let counter_3 count event on counter_0.
However, after this connection, the voltage from counter_0 is about 2V measured by Oscilloscope.
Also, counter_3 cannot count the event on counter_0.
Is there any problem on my connection ? or any tips for solving this problem??
Thanks in advance!!
p.s. It works when only two counters are working.
for example, when counter_0 generates pulse tra
in and output is connected to pfi_27, then counter_3 can count the event on counter_0.
Thanks again!

Hello,
Thank you for contacting National Instruments.
This issue may be related to amount of current the output of counter 0 can produce. You may want to try a different method for making these connections. Try routing your counter 0 output on to RTSI line 1. Then use RTSI1 as the gate for counters 1 and 2 and the source for counter 3. This way, you will not need to use two seperate PFI connections.
If you are using Trad. DAQ and LabVIEW you will need to use the Route Signal.vi. If you are using DAQmx, you will need to use the Export Signal.vi
Regards,
Bill B
Applications Engineer
National Instruments

Similar Messages

  • I cannot use data and voice at the same time.

    I cannot use data and voice at the same time.
    I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
    This is a very basic issue, am I missing something? Please help.
    My Model is lumia 820 with the latest portico update.
    TIA
    Sandeep

    I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

  • Can we use exceptions and conditions at the same time?

    can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

    Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
    But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

  • My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    OK great info!
    I found 2 possible ethernet to USB adapters:
    By "Plugable":  USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
    2. Apple USB Ethernet Adapter
    Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance.  BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
    One person commented: 
    This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
    Thanks for any additional comments.
    Best regards,
    Steve Schulte
    Sunday 6 January 2013

  • IPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

    iPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

    Talk to your email provider. They control their servers and what happens to your email.

  • My SB Audigy 2 card can't use headset and musicamplifier at the same time

    Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
    The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
    In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
    I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
    But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
    Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
    please help, thx.
    Michael

    If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
    Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
    Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    Another option:
    Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
    --> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
    = You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
    .jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

  • Ipod nano (5th generation) - want to use headphones and charge at the same time

    I have an ipod nano (5th generation).  Do I need a special set of headphones to use the headphone jack and charge the ipod at the same time?

    The iPod nanos have a 30 pin dock connector and a headphone jack. When you charge the iPod you use the dock connector therefore you can use and charge at the same time. You cannot use and charge the iPod shuffle at the same time. You might have the two mixed up.

  • Can WRT54G use WPA and WEP at the same time?

    I used to have a smc 802.11b wireless router and a dlink 802.11b wireless print server.
    In order to have WPA and a firewall, I replaced the wireless router with a linksys WRT54G.
    Then I realize the dlink print server, even though it has the "g" keyword in the model name, does not do WPA (DP-G321).
    Do I have to buy a 802.11g wireless print server? Or is there another solution?
    I don't supposed the linksys router can do both WPA and WEP at the same time?
    Connecting the print server to the router with a cable is not feasible. They are on different floors.

    both of your devices are has a wireless b technology settings, just set a wep encryption on your network rather than wpa because some wireless b devices don;t work with wpa. with regards to your query if wep and wpa can be used at the same time, the answer is no.

  • I have an iPad 2 (wifi 3G). Is it correct to use wifi and 3G at the same time ? Or one at time depending on connectivity? Thanks.

    I have an iPad 2 (Wifi + 3G). Is it correct to use the Wifi and 3G at the same time, or one at a time, depending on connectivity? Thanks in advance.

    Your iPad will use wifi first if available. If wifi is not available, it will use 3G.
     Cheers, Tom

  • Using LIKE and IN at the same time

    Is it possible to use both LIKE and IN at the same time such as:
    select first_name from emp where user_id LIKE IN('1%','2%')
    Thanks in advance
    --Joshua                                                                                                                                                                                                                                                                                                                                   

    Or consider the IN - parameters as a string. Then you can do the following:
    SQL> SELECT ename
      FROM emp
    WHERE EXISTS (
              SELECT NULL
                FROM (SELECT RTRIM (SUBSTR (nums,
                                            INSTR (nums, ',', 1, iter.pos) + 1,
                                              INSTR (nums, ',', 1, iter.pos + 1)
                                            - INSTR (nums, ',', 1, iter.pos)
                                   ) nums
                        FROM (SELECT ',' || 'SCO,BLA,CLA' || ',' nums
                                FROM DUAL) csv,
                             (SELECT ROWNUM pos
                                FROM all_objects
                               WHERE ROWNUM < 50) iter
                       WHERE iter.pos <=
                                  (  (  LENGTH (csv.nums)
                                      - LENGTH (REPLACE (csv.nums, ','))
                                   / LENGTH (',')
                                - 1)
               WHERE ename LIKE '%' || nums || '%')
    ENAME    
    BLAKE    
    CLARK    
    SCOTT    
    3 rows selected.

  • Does Apple TV output audio via both HDMI and Toslink at the same time?

    I would like to know if Apple TV outputs audio via both the HDMI and Toslink ports AT THE SAME TIME... 
    Ideally, I want to use it in my main zone connected to my TV via HDMI and convert the Toslink signal to analog to be exported to Zone 2 on my receivers.  (My receiver - as do most - can only direct analog sources to Zones 2, 3, and 4)

    Hey Bob,
    I have this same issue.  I was wondering what model of toslink to analog adapter you went with and how well it works?
    Thanks!

  • How to choose witch window will open external links when using multiple Firefox profiles at the same time?

    I am using 2 firefox profiles at the same, one for working and another for reading news. I start them with "firefox -no-remote -P profilename", so there are 2 firefox processes running.
    It works well, but when I click a link in an external app (like in Google Talk), the link is opened in the first firefox process I launched. I mean, if I ran the "news" firefox first, it will always open the external links.
    Is it possible to change this behavior? I'd like all external windows to be opened in the "news" firefox, never in the "working". Of course I'll achieve that if I open it first, but if I first run the "news", then the "working", then I close the news for any reason, now links will always open in the "working" until I close it.
    I running linux (opensuse 11.3).

    '''traysh''',
    Profiles '''''period''''' are "unsupported" by Mozilla. Profiles are "there" but the developers want no part of non-developers using them or fixing anything related to Profiles that has been suggested in a Bug report, or documenting much related to Profiles. Profiles as we know them now are going to disappear from Firefox in the near future, although no specific version number or date has been fixed for that to happen. It is up to us user's to share our experiences with Profiles with other user's. I'm a relative noob to Linux, and all my experience with running multiple Profiles and -no-remote is with Windows OS's.
    '''cor-el''',
    So are you saying that on Linux external links will only open in the first Profile that was opened if multiple Profiles are running?
    And that external links won't open a Profile that isn't already running - if any Profile is already running?
    ''I wish the differences between Windows and Linux as far as '''-no-remote''' and running multiple Profiles were better documented for "us" Linux noobs over at the MozillaZine KnowledgeBase - hint. Unless I am not looking hard enough in the MZ KB for that information....''

  • Can't use Skype and PhotoBooth at the same time?

    I recently updated my Skype to the new version. I used to be able to have my camera on PhotoBooth and Skype working at the same time, however since I made the update I cannot. Depending on which programme I open first, the other will not work. If Skype is working, then the error message 'Camera offline' comes up. I have tried uninstalling and reinstalling Skype and that has not solved the issue. Does anyone have any ideas? Thanks.

    Never seeing this problem.
    Are you using a MobileMe IMAP account or another provider and account? Is problem when using the Apple Mail application in OS 10.4.11 on your listed G5?
    Ernie

  • Can't use iPhone and Mail at the same time

    When my iPhone is on I can't receive Apple Mail on my computer. I get an error message on the computer that says another client is using the mail (or something to that effect). If I turn off the iPhone the error message usually disappears on my computer allowing me to access mail. Is there something I can do so I can keep my iPhone on and also get Apple Mail at the same time?

    Never seeing this problem.
    Are you using a MobileMe IMAP account or another provider and account? Is problem when using the Apple Mail application in OS 10.4.11 on your listed G5?
    Ernie

  • Use headset and Mic at the same time

    The latest MacBook Pro does not come with Mic port. How can I use my professional Mic for audio recording and my editor can listen the recording through headset at the same time.

    Oh, but the Retina was irresistible....  The regulars have digital and analog audio input and output.
    So, ample pocketed Mac users get to choose between audio input/output adapters that plug into the USB or the Thunderbolt ports.

Maybe you are looking for

  • Outlook Quirk With E-Mail Submission of XML and/or PDF

    Hello all. I am running into an annoying little Outlook quirk when testing e-mail submissions of PDF forms. When the submit button is clicked, Outlook will open a new message window as it should, but the Send button will not trigger when clicked. The

  • HP Web OS Tablet

    HP Web OS Tablet Problem HP tech support referedme to this site for expert level technician help for my HP Web OS Tablet. The problem is that it does not open and play photos and videos transfered to it from a PC. You can see the files have actually

  • After excise invoice.?

    Hi...Gurus, I successfully created the excise invoice. BED and AED are coming in to the excise invoice. So wt are the things to do for SD part? Here Iam using the TAXINN procedure. Gurus...waiting for u r Suggestions.. Regards, jyothi.

  • What is the best practice for Enumeration for ADF?

    Dear All, What is the best practice for Enumeration for ADF? I need to add enumeration to my application. ex: Gender, Marital Status. How to provide? Custom Declarative Components or are there any other way? Thank you. Erdenebayar

  • I am getting the error "There was an error in the App Store. Please try again later. (100)"

    I am getting the error "There was an error in the App Store. Please try again later. (100)" when trying to buy Logic Pro X. How do I fix this? I've tried all of the solutions I've found online and nothing has worked.