Counting Icons Just For Fun
Just for gee whizzes, how can I tell how many icons are in a
lesson? Is there a an already established function or variable
within AW 7.02? I know that a library gives you the count of how
many items are in the ''.a7l'' but was wondering if there was
something similar for an ''.a7p''.
TIA,
Jerry
Jerry,
- Select the root timeline
- Select Modify > File > Properties from the menu
Regards,
Andrew
Similar Messages
-
Hey guys! I want to connect my Imac 21 " with my Tv just for fun. Does anyone know , how it works?
Selecting the correct adapter and cable depends on which year model iMac you have and what inputs the TV has?
Check the User's Guide that came with your iMac or your Spec's at > Apple - Support - Technical Specifications
to see if your iMac has a Mini-DVI or Mini DisplayPort and then select that adapter with the correct connection for the TV.
Example: if you have a 2010 or 2011 iMac and an HDMI ready TV, then you would want the > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.) -
Yesterday I ran Disk Utility and came up with hundreds of permissions that needed repair. I hit the "repair permissions" button and waited until it said they were repaired, but just for fun I hit the "verify permissions" button again, and they all came back! I did this several more times and every time I would hit "verify permissions" I would get the same list. What's up? I've always suspected diagnostic programs, but this is Apple's own!
Ignore them. They aren't errors. You will keep seeing the same ones. As long as you get the message "Permissions repair complete," you're OK.
http://support.apple.com/kb/TS1448?viewlocale=en_US -
Generate DDL for objects (just for fun)
I'm been putting together queries that generate DDL. Considering exp/imp ROWS=0 can be used, or DBMS_METADATA there is little point. Though, with restricted access those may not be possible options, but then an external tool like TOAD could do it. Therefore, my justification for this is "just for fun".
Here is one for TABLEs. It does not generate the CONSTRAINTs (which i try to get in the next query), and no storage clauses. This query is also formatted for fixed width font with tabs equivalent to eight characters:
SELECT
SUBSTR
REPLACE
CASE
WHEN Columns.Column_Id = 1 THEN
'CREATE TABLE ' || Columns.Table_Name
|| CHR(10) || '('
|| CHR(10)
END
|| ' ' || Columns.Column_Name
|| RPAD(CHR(09), Tabs - FLOOR((LENGTH(Column_Name) +1) / 8), CHR(09))
|| Data_Type
|| CASE
WHEN Data_Type IN ('CHAR', 'VARCHAR2') THEN '(' || Char_Length || ')'
WHEN Data_Type = 'FLOAT' THEN '(' || Data_Precision ||')'
WHEN Data_Type = 'NUMBER' THEN
CASE WHEN Data_Precision IS NOT NULL THEN '(' || Data_Precision
|| CASE WHEN Data_Scale IS NOT NULL THEN ', ' || Data_Scale END
||')'
END
END
|| CASE
WHEN Data_Default IS NOT NULL
THEN
RPAD
CHR(09),
CASE Data_Type
WHEN 'CHAR' THEN CASE Char_Length WHEN 1 THEN 2 ELSE 1 END
WHEN 'DATE' THEN 2
ELSE 1
END,
CHR(09)
|| 'DEFAULT '
|| (
SELECT
ExtractValue
DBMS_XMLGEN.GetXMLType
SELECT
Data_Default
FROM
All_Tab_Columns
WHERE
Owner = ''' || Columns.Owner || '''
AND Table_Name = ''' || Columns.Table_Name || '''
AND Column_Name = ''' || Columns.Column_Name ||'''
'ROWSET/ROW/DATA_DEFAULT'
FROM
Dual
END
|| CASE
WHEN Columns.Column_Id = Info.Total_Columns
THEN CHR(10) || ');' || CHR(10) || CHR(10)
ELSE ','
END,
',' || CHR(10) || CHR(10),
',' || CHR(10)
1,
181
) Statement
FROM
All_Tab_Columns Columns,
SELECT
Owner,
Table_Name,
MAX(Column_Id) Total_Columns,
MAX(FLOOR((LENGTH(Column_Name) + 1) / 8)) + 1 Tabs
FROM
All_Tab_Columns
WHERE
Owner = 'SYS'
GROUP BY
Owner,
Table_Name
) Info
WHERE
Columns.Owner = Info.Owner
AND Columns.Table_Name = Info.Table_Name
ORDER BY
Columns.Owner,
Columns.Table_Name,
Columns.Column_Id;This next query get CONSTRAINTs. No formatting is used, because it becomes quite unweildy (though, if it used multiple lines, that would change). Another interesting thing is whether the CONSTRAINT names were generated or not. If they were generated, this still uses the old name and does not generate a new one:
WITH
Cons_Columns
AS
SELECT
Owner,
Constraint_Name,
SUBSTR
REPLACE
REPLACE
XMLAgg(XMLElement("A", Column_Name)
'<A>',
'</A>'
4
) || '"' List
FROM
SELECT
Owner,
Constraint_Name,
Column_Name
FROM
All_Cons_Columns
ORDER BY
Position
GROUP BY
Owner,
Constraint_Name
SELECT
'ALTER TABLE ' || Table_Name
|| ' ADD CONSTRAINT ' || Constraint_Name
|| ' '
|| CASE Constraint_Type
WHEN 'C' THEN 'CHECK'
WHEN 'U' THEN 'UNIQUE'
WHEN 'P' THEN 'PRIMARY KEY'
WHEN 'R' THEN 'FOREIGN KEY'
END
|| '('
|| CASE
WHEN Constraint_Type = 'C' THEN
SELECT
ExtractValue
DBMS_XMLGEN.GetXMLType
SELECT
Search_Condition
FROM
All_Constraints
WHERE
Owner = ''' || Cons.Owner || '''
AND Constraint_Name = ''' || Cons.Constraint_Name || '''
'ROWSET/ROW/SEARCH_CONDITION'
FROM
Dual
WHEN Constraint_Type IN ('P', 'R', 'U') THEN
SELECT
List
FROM
Cons_Columns
WHERE
Cons_Columns.Owner = Cons.Owner
AND Cons_Columns.Constraint_Name = Cons.Constraint_Name
END
|| ')'
|| CASE Constraint_Type
WHEN 'R' THEN
SELECT
' REFERENCES (' || List || ')'
FROM
Cons_Columns
WHERE
Cons_Columns.Owner = Cons.R_Owner
AND Cons_Columns.Constraint_Name = Cons.R_Constraint_Name
|| ' ON DELETE ' || Delete_Rule
ELSE ''
END
|| ' ' || DEFERRABLE || ' ' || DEFERRED
|| ' ' || VALIDATED || ' ' || STATUS || RTRIM(' ' || RELY)
|| ';'
FROM
All_Constraints Cons
WHERE
Owner = 'SYS'
ORDER BY
1,
Constraint_Name;Shoblock, thanx!
For NUMBER is was using a wrong COLUMN, and also in the wrong order. Serves me right for not following the documentation. And, i just ignored FLOAT. But not it mostly matches DESC (except this query shows the ", 0" where DESC drop it instead).
I fixed the query above.
The XML part that gets the long has a failure. If the Data_Default contains an XML special char it will get encoded. The way to not encode it, it looks, requires PL/SQL. Which means it would not be done in one query (without a FUNCTION).
I am curious if anyone else is interested in such queries, whether for "fun" or otherwise. -
few days ago I have purchased Iphone casino games from itunes apps store. One of the game was made by the company called "ARISTOCRAT" dragan game. Usually we will get basic tokens to play the game, and if we ran out of the tokens all we need to do is going into "manu" and "setting" selete "dream" and reset that we should be able to continue play the game with same amount of the basic tokens. The one game would not let us to go back to the game. There were msg came out said" game center requires an active connection to the internet"? I didn't feel comfortable because we purchased the game for $1.99 to play for fun and not to gamble. We do have credit card on your file. We don't want to be charged alot of money for something not in our well. I need help to answer the question on the following:
1. Are we able to ever play this game again without going to internet? We don't even know which site to go to, because when we press the ok button nothing else came out to direct us to any area.
2. We only purchased the few days ago order ID: MGT74GN6V7 on 10/03/12. all the other games we purchased we were able to continue to play by doing the same setting.
Thank you for your help and looking forward to hear from you!You need to contact itunes support
We are all itunes users just like you.
http://www.apple.com/support/contact/ -
Just for fun: Can you guess how I did this?
A few months ago a thread here discussed different way to stroke 3D objects in After Effects. There were lots of clever suggestions.
I made a TV spot last week that uses growing 3D ribbons to spell out the 2012 in the product title. There are straight planes and curves within the ribbon paths, and lighting and shadows were required to match the original album art it replicates. I needed to get the job done quickly and didn't have time to use a 3D application, so I used (what I think) was a rather innovative approach.
So, for a bit of fun, can you pick how I did this? The project is created entirely in AE, in one composition.
Apologies for the heavy compression in the video.Thanks Todd!
My first attempt was exactly Rick's, using stacked solids with Stroke applied. I gave up on it because, once shadows were applied, the "ribbons" seemed to develop a mottled texture, presumeably because each layer in the stack casts a shadow on the layer behind it. Using Rick's design above, here's an example:
So in the end, I used text layers! Each ribbon is simply a long string of Helvetica "I" characters, with their kerning pulled back so all the characters touch. Convert to per-character 3D, rotate X axis 90 degrees, and apply mask as text path. Then I use a simple Text Animator on opacity to draw the lines on or off.
The great advantage of this is no cumbersome stack of layers. Each colour is one layer, so there's just five layers in my comp for each object. The "20" is one object, then the "1", then the "2" - 15 layers in all for the whole thing. Changing colours is as easy as changing a single text layer.
A total render hog, all the same: it took 11 hours to render the 15 second spot, on an 8 core Mac Pro with 16GB of RAM. But in 3D Draft mode the comp was surprisingly easy to work with. It's just the lighting and shadows that slow things down.
Anyways, perhaps this may inspire someone else to do something interesting with text layers. -
Reg: Just for fun [Off-Topic] -
Hi All,
Has anybody ever seen Mr. Thomas Kyte over here?
Or, Steven Feurstein behind the 'The PL/SQL Challenge'?
Just getting curious to know because I've never seen those biggies over here.
@Mod - Sorry for getting off-topic.
- RanitRe: DISTINCT not working with wmsys.wm_concat
-
Just for fun...contest problem
I attended a programming contest and one of the problems stumped me a bit. I just wanted to share it with you so if you had some free time, you could play with it. It has to do with the longest increasing substring of numbers. If you were given a sequence of numbers like "1 3 11 6 2 8 10 9 12 5 7 0" where 0 symbolized the end of input, your program would have to find the longest path of increasing numbers. The answer to this one should be 6, "1 3 6 8 10 12". The tough part on this one for me was that my program just chose the first available path, "1 3 11 12", so reported 4.
Because I was under a time constraint, and I saw that this would take a while, I skipped over it. How would you experienced programmers go at solving this with a time constraint of < 30 minutes?
I feel I need to stress again that this contest is over, and my question reflects pure curiosity. :)I still can't see the entire effect of a recursive
function at first. I have learned to recognize which
problems lend themselves to be recursive solutions. I
just start by laying the code and testing it. It takes
a while to figure out what to change so that a
recursive function will act like I want it too. If
you do it enough times, it gets easier.Since this is in regard to the thread I posted...I'll bump it and give you some advice too. Since your recursive solution seems to be a bit simpler than mine was, although I don't yet know how it'll perform against the one I have.
Anyway, recursion is basically a couple things:
1. Base case, Test if you've solved the problem appropriately. When you've solved or completed your problem, you stop. If there could be more than one answer and you are looking for the best one, you should check your current answer that you're looking at against your best. If it is better, then store the better one and return. The returning part is essential as it stops the path from continuing since it has succeeded.
2. Do some work to get closer to a solution. (In this case, remove a number). The work you do should not hinder your solution, but it should better it. If there is more than one choice, this will be your branch part. Choose a branch, add what you chose to your solution, and recur.
3. Repeat 2 choosing the next branch.
And that's really about it. All you have to remember to do is insure that you keep a constant view of the problem as it entered your function between branch choices. Otherwise you can really mess stuff up. Anyway, this is how I tackle recursion, and it always works for me.
Just sometimes (as in the problem in this thread and the one I just posted without realizing this one existed) my recursive solution was too slow to be practical all the time and I went on a week long hunt to find an iterative solution (which I'm almost convinced doesn't exist at this point). -
Just for fun, my new site
I had to do a little blog-like site for my web class. The code isn't perfect (I only had a couple of days to take this from start to finish) but the results are pretty cool. You guys always help me with my questions and projects so thought you'd like to see some of my current work. http://mat.miracosta.edu/MAT235/studentwork/Ng_Gary/
The inspiration for this was an old school notebook I found at my parents house from when I was a kid. Lots of doodles and stuff that I would do instead of paying attention in class. So I put a few silly widgets on the side for those with ADD like me . I also tried to do things I had never tried, like google web fonts. Lots to do still to clean it all up, but again just thought you would like to see this. Make sure you roll over the title!Welcome to the Apple Discussions. When iWeb publishes a site there is an index.html file that is created in the iDisk/Web/Sites folder that points to the last published site. So when you added a new test site and published the default became that new site. If you make a change to a page in the original site, just a minor one like moving pages as Wyodor mentioned, and republish the original site will again become the default.
If you plan on doing more with iWeb in the way of additional sites you might consider purchasing a domain name for your portfolio and have it point to your the first page of your original site. That way you can then publish additional sites and not have your portfolio site be replaced with a more recently published site.
OT -
ITS NOT A BIZZZZZNESS PHONE... JUST FOR FUN
IM USING PHONE FROM LAST 1 MONTH, I PURCHASED D FOR MY BIZZZNESS BUT ITS NOT FOR USEFULL...
BLACKBERRY CANT OPEN HEAVY SITES LIKE IRCTC.............. N SO ONNN
SO GUYZZ IF UR GOING TO BUY DIS PHN SO JUST REMEMBER DAT ITS USELESS FOR BIZZZZNESS
BEWARE OF ITRAJAN_653 wrote :
IM USING PHONE FROM LAST 1 MONTH, I PURCHASED D FOR MY BIZZZNESS BUT ITS NOT FOR USEFULL...
BLACKBERRY CANT OPEN HEAVY SITES LIKE IRCTC.............. N SO ONNN
SO GUYZZ IF UR GOING TO BUY DIS PHN SO JUST REMEMBER DAT ITS USELESS FOR BIZZZZNESS
BEWARE OF IT
Hellorajan_653,
It means you are unable to visit IRCTC but to visit sites like IRCTC which is one of the busiest site you need a good connection and speed and for that it is your Carrier Airtel which is responsible,So call your carrier and ask then . Unable to visit an website does not determine that what this Smartphone is capable of.
By the way what is this device " 2012 " I had not heard blackberry making such device model.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Photo locations moved just for fun?!?
I noticed that iPhoto 11 decided to move all of the photos/videos into new folders. Original photos are now stored in "Masters" instead of "Originals" and modified photos are stored in "Previews" instead of "Modified". Apple left the original folders in place and just made them aliases to the new folders. Now Carbonite has to back up 200 GB of my pictures and videos all over again just because Apple wanted to rename their folders. Thanks a lot Apple.
which is probably good for the long term - I wonder if the ability to reconnect to referenced photos has been improved in this change?
LN -
Has anyone yet tried using the MS Agent ActiveX interface to incorporate
speech input/output within Labview?
I installed it a while back, but there seems to be no documentation within
the package. Casual exploration of the ActiveX properties and methods
produces a VI that looks like it should talk, gives no errors, but remains
silent, and I'm not sufficiently motivated myself to go trawling through the
M$ site and end up wasting several hours on this simply to add a gimmicky
touch to things.Craig,
I've tried that, and there's even an example somewhere, but I can't
remember where I found it. I've got it zipped up if you want it. I
found, however, that it is easier to use MASH (a program which you can
use for free which makes executable scripts) (Microsoft Agent Scripting
Helper) and just call the script when you need it. Using that
technique, I can actually change the script but not have to change any
LabVIEW code.
Mark
In article <8mr8oh$ip4$[email protected]>,
"Craig Graham" wrote:
> Has anyone yet tried using the MS Agent ActiveX interface to
incorporate
> speech input/output within Labview?
>
> I installed it a while back, but there seems to be no documentation
within
> the package. Casual exploratio
n of the ActiveX properties and methods
> produces a VI that looks like it should talk, gives no errors, but
remains
> silent, and I'm not sufficiently motivated myself to go trawling
through the
> M$ site and end up wasting several hours on this simply to add a
gimmicky
> touch to things.
>
>
Sent via Deja.com http://www.deja.com/
Before you buy. -
The data table looks like this
date num1 num2 num3 num4 num5 num6
1/1/06 1 45 32 21 15 48
SQL script 1 should be able to do the following
show the Top 3 number pairs
another words if the pair 45 and 15 shows up 98 times and 32 and 12 shows up 3 times
then I want to have 45 and 15 show as one of the top 3 number pairs
I know this is a difficult one
So that being said see if I can re-explain it here
I have say two dates
1/1/2006 and 1/2/2006
on the first date I have six numbers being
1,24,45,35,47,14
and the second date I have
24,35,9,15,46,17
Now I can if it is needed to re do the data structure to reflect it like this
date num
1/1/2006 1
1/1/2006 24
1/1/2006 45
1/1/2006 35
1/1/2006 47
1/1/2006 14
1/2/2006 24
1/2/2006 35
1/2/2006 9
1/2/2006 15
1/2/2006 46
1/2/2006 17
Now somehow I am not sure how but I need to take the six numbers from each date and compare them with every other date.
so another words from date one take 1 and 24 and see if that combo matches other dates then go to 1 and 45 and do the same and so on.Hi,
Are you going to win some lottery? :)
WITH Test_Data AS (
SELECT TO_DATE('1/1/2006', 'fmDD/MM/YYYY') AS D, 1 AS Num FROM Dual UNION ALL
SELECT TO_DATE('1/1/2006', 'fmDD/MM/YYYY'), 24 FROM Dual UNION ALL
SELECT TO_DATE('1/1/2006', 'fmDD/MM/YYYY'), 45 FROM Dual UNION ALL
SELECT TO_DATE('1/1/2006', 'fmDD/MM/YYYY'), 35 FROM Dual UNION ALL
SELECT TO_DATE('1/1/2006', 'fmDD/MM/YYYY'), 47 FROM Dual UNION ALL
SELECT TO_DATE('1/1/2006', 'fmDD/MM/YYYY'), 14 FROM Dual UNION ALL
SELECT TO_DATE('1/2/2006', 'fmDD/MM/YYYY'), 24 FROM Dual UNION ALL
SELECT TO_DATE('1/2/2006', 'fmDD/MM/YYYY'), 35 FROM Dual UNION ALL
SELECT TO_DATE('1/2/2006', 'fmDD/MM/YYYY'), 9 FROM Dual UNION ALL
SELECT TO_DATE('1/2/2006', 'fmDD/MM/YYYY'), 15 FROM Dual UNION ALL
SELECT TO_DATE('1/2/2006', 'fmDD/MM/YYYY'), 46 FROM Dual UNION ALL
SELECT TO_DATE('1/2/2006', 'fmDD/MM/YYYY'), 17 FROM Dual UNION ALL
SELECT TO_DATE('1/3/2006', 'fmDD/MM/YYYY'), 24 FROM Dual UNION ALL
SELECT TO_DATE('1/3/2006', 'fmDD/MM/YYYY'), 10 FROM Dual UNION ALL
SELECT TO_DATE('1/3/2006', 'fmDD/MM/YYYY'), 1 FROM Dual UNION ALL
SELECT TO_DATE('1/3/2006', 'fmDD/MM/YYYY'), 46 FROM Dual UNION ALL
SELECT TO_DATE('1/3/2006', 'fmDD/MM/YYYY'), 35 FROM Dual UNION ALL
SELECT TO_DATE('1/3/2006', 'fmDD/MM/YYYY'), 17 FROM Dual UNION ALL
SELECT TO_DATE('1/4/2006', 'fmDD/MM/YYYY'), 24 FROM Dual UNION ALL
SELECT TO_DATE('1/4/2006', 'fmDD/MM/YYYY'), 10 FROM Dual UNION ALL
SELECT TO_DATE('1/4/2006', 'fmDD/MM/YYYY'), 20 FROM Dual UNION ALL
SELECT TO_DATE('1/4/2006', 'fmDD/MM/YYYY'), 4 FROM Dual UNION ALL
SELECT TO_DATE('1/4/2006', 'fmDD/MM/YYYY'), 35 FROM Dual UNION ALL
SELECT TO_DATE('1/4/2006', 'fmDD/MM/YYYY'), 17 FROM Dual
All_Pairs AS (
/* All possible pairs with no duplicates (a, b), (b, a) */
SELECT TD_1.D, TD_1.Num AS Num_1, TD_2.Num AS Num_2
FROM Test_Data TD_1, Test_Data TD_2
WHERE TD_1.D = TD_2.D
AND TD_1.Num < TD_2.Num
Pair_Cnts AS (
SELECT Num_1, Num_2, COUNT(*) AS Cnt
FROM All_Pairs
GROUP BY Num_1, Num_2
Pair_Ranks AS (
SELECT Num_1, Num_2, Cnt,
DENSE_RANK() OVER (ORDER BY Cnt DESC) AS Rank
FROM Pair_Cnts
SELECT Num_1, Num_2, Cnt
FROM Pair_Ranks
WHERE Rank <= 3
ORDER BY Rank ASC
NUM_1 NUM_2 CNT
24 35 4
17 35 3
17 24 3
10 35 2
24 46 2
10 17 2
10 24 2
35 46 2
1 35 2
17 46 2
1 24 2Regards,
Dima -
System.exit(int) - Just For Fun
import java.applet.*;
public class BrowserKill extends Applet {
public void init() {
System.exit( 0 );
}Terminate JVM while the browser is trying to contact JVM.
Wow ... I've tried this code in IE 6.0 ... It crashed my browser ...
What do you think ?
You can try this code in JSP/Servlet ...
I'm sure that the server will be crashed. (Because of terminating JVM)Wow ... I've tried this code in IE 6.0 ... It crashed my browser ...
What do you think ?Serves you right for using such a rubbish browser. The security manager should have trapped the call and thrown a SecurityException, killing the applet but not the VM. -
I read were Cortana might become available in a future version of Windows. I was thinking of what it would have been like to have Cortana available now. What might have I asked her? What would you ask her?
“Cortana, can you do my job for me? Will they still need me?”
“Cortana, what do you mean I should install both SSDT and SSDT?”
“Cortana, trusted administrator? When did I become an untrusted administrator?”
“Cortana, when I turned off UAC, I did not really turn off UAC?”
“Cortana, Metro will fail when I turn off UAC, even if though I did not really turn it off?”
“Cortana, when is a feature a feature and a bug a bug and not a bug a feature and a feature a bug?”
“Cortana, what do you mean I have to use an elevated command prompt to grant myself access to resources to which my non-elevated self already has access?”
“Cortana, why are explicit rights being granted to my domain account when local admin already has that access?”
“Cortana, the purpose of a service SID is to allow isolation of permissions, but GPO is not able to allow services SIDs to have isolated permissions?”
“Cortana, what do you mean a VS 2012 update installed SQL Server 2014?”
“Cortana, it's slow because of a cert validation failure but runs anyway? Why the validation then?”
“Cortana, is the Master Chief available to pay a visit to some of the UAC and GPO architects at MS?”
“Cortana, is there any easy way to run this script – the script I created to make it easier?”
“Cortana, are you being mysterious on purpose?”
“Cortana, what do you mean that you're not the only one that does not know what I'm doing? There's only the two of us.”
“Cortana, can I borrow that index key thingy?”
Randy in MarinHello,
I'd talk about this in the
Windows forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})
Maybe you are looking for
-
Can't See 5 GHz Net with EA6500 and Intel Dual Band Wireless-AC 7260 on Windows 8.1
I can't see the 5 GHz side of the router so I can't do 802.11ac. I can see 2.4. Any help? Thanks...
-
Using WWSBR_API.ADD_ITEM raises exception ITEM_CREATION_ERROR
All, i create a very simple procedure in the schema of the portal owner: create or replace procedure test_insert_item is l_item_nr number; l_site_id number; l_corner_id number; l_type_id number; l_type_caid number; l_region_id number; begin l_site_id
-
Java: how to handle user-defined character (UDC)??
Dear all, i am new to internalization and localization. i am now porting an application from vb.net to java. the vb.net version can handle (input/output [to file, screen, database] ...etc) user defined character (charset is big5 + extra characters) t
-
Restoring edit details after Quick time compression
How do I exit an i-movie editing session without loosing the details of those edits? When logging off I am required to share the movie via Quick time in order to store it for the next editing session..[I think,..]. When I return to continue working m
-
I am unable to open attachments other than pdf. What do I have to change?
Please advise on how I can open all attachments