Counting Posted docuemnt in FI based on Document Type

Hello Team,
As a part of audit trail...I need to count all the posted FI documents based on document type and Company code. Table BKPF does not meet my requirement as it takes lot of time to count the documents and even not possible to get the break-up. is there any report / T.Code with with i can achieve my purpose.
Please reply.

Hi,
1. Go to T-code TAANA and click on Start table analysis (F8).
2. Enter BKFP as table name and click the push button "Analysis variant". In the next popup,  click     on "Ad Hoc Variant" button.
3. Select the fields Company code, Fiscal year, Doc type and continue.
4. Select the new variant and continue.
5. Select the run in background option and proceed.
6. Click on Immediate and the save the job
7. Click on Job (F9) to see the job status
    Once job finish click on back
8. Double click on AD-HOC to see the results.
Regards
Rohidas Shinde

Similar Messages

  • Based on document type , editable schedule qty in me22n, me52n

    Dear Gurus,
    based on document type , the schedule qty field under delivery schedule tab to be editable, at present it is in greyed out mode, is there any config settings are dev if so whatever please share with more details

    Hi,
       As of my knowledge, the change mode screen layout cant be defined based on document type. You can make the field as editable or non editable  in the field selection key AKTV (for both PR and PO).
       An alternate method is explained in the KBA: 2048405 - How to control the field layout
       If you still want to make the field selection based on document type in ME22N / ME52N, then you may go for development.
    Regards,
    AKPT

  • Restrict the user   based on document type on migo transaction-prepare GRN

    Hi,
    We are running ECC6.0 R/3 system.We had a requirement as follows
    In MIGO transaction , we want to restrict the user on document type i.e. we want that a particular user can  prepare GRN for document type  STO only. He cannot prepare GRN for other document type.
    We checked  SU24->maintain check indicators for transaction codes->enter migo->execute->check indicator.This returned us the authorisation objects present in Migo transaction.We checked the help of all these objects,but none of them we found suitable for above mentioned requirement.We were planning to find out the proper authorisation object to add to Profile generater.
    The following is the objects which we have checked for.
    A_B_ANLKL-->     Asset Postings: Company Code/Asset Class
    A_B_BWART-->     Asset Postings: Asset Class/Transaction Type
    B_USERSTAT-->     Status Management: Set/Delete User Status
    B_USERST_T-->     Status Management: Set/Delete User Status using Process
    C_AFKO_AWK-->     CIM: Plant for order type of order
    C_CACL_DSG-->     Interface Design
    C_DRAW_BGR-->     Authorization for authorization groups
    C_DRAW_DOK-->     Authorization for document access
    C_DRAW_TCD-->     Authorization for document activities
    C_DRAW_TCS-->     Status-Dependent Authorizations for Documents
    C_KLAH_BKP-->     Authorization for Class Maintenance
    C_STUE_BER-->     CS BOM Authorizations
    C_STUE_WRK-->     CS BOM Plant (Plant Assignments)
    C_TCLA_BKA-->     Authorization for Class Types
    C_TCLS_BER-->     Authorization for Org. Areas in Classification System
    C_TCLS_MNT-->     Authorization for Characteristics of Org. Area
    F_BKPF_BUK-->     Accounting Document: Authorization for Company Codes
    F_BKPF_BUP-->     Accounting Document: Authorization for Posting Periods
    F_BKPF_KOA-->     Accounting Document: Authorization for Account Types
    F_FICA_FOG-->     Funds Management: authorization group of fund
    F_FICA_FSG-->     Funds Management: authorization group for the funds center
    F_FICB_FKR-->     Cash Budget Management/Funds Management FM Area
    F_KNA1_APP-->     Customer: Application Authorization
    F_LFA1_APP-->     Vendor: Application Authorization
    F_SKA1_BUK-->     G/L Account: Authorization for Company Codes
    G_GLTP  -->       Spec. Purpose Ledger Database (Ledger, Record Type, 
                                   Version)
    J_1IDEP_SL-->     Authorization object for depot sale transaction
    J_1IEXC_OT-->     Authorization object for Other Excise Invoice Create
    J_1IEX_PST-->     Autorization object for posting Other Excise invoice
    J_1IGRPT1-->     Auth. for PART1 at GR
    J_1IINEX  -->            Incoming Excise Invoice
    J_1IRG23D-->     Authorisation object for Depo Transactions
    K_CCA-->                     CO-CCA:  Gen. Authorization Object for Cost Center 
                                    Accounting
    K_CSKS     -->                CO-CCA:  Cost Center Master
    K_CSKS_SET-->     CO-CCA: Cost Center Groups
    K_PCA-->                    EC-PCA: Responsibility Area, Profit Center
    L_TCODE-->                    Transaction Codes in the Warehouse Management System
    M_ANFR_BSA-->     Document Type in RFQ
    M_ANFR_EKG-->     Purchasing Group in RFQ
    M_ANFR_EKO-->     Purchasing Organization in RFQ
    M_ANFR_WRK-->     Plant in RFQ
    M_BEST_BSA-->     Document Type in Purchase Order
    M_BEST_EKG-->     Purchasing Group in Purchase Order
    M_BEST_EKO-->     Purchasing Organization in Purchase Order
    M_BEST_WRK-->     Plant in Purchase Order
    M_MATE_CHG-->     Material Master: Batches/Trading Units
    M_MATE_STA-->     Material Master: Maintenance Statuses
    M_MATE_WRK-->     Material Master: Plants
    M_MRES_BWA-->     Reservations: Movement Type
    M_MRES_WWA-->     Reservations: Plant
    M_MSEG_BMB     -->Material Documents: Movement Type
    M_MSEG_BWA-->     Goods Movements: Movement Type
    M_MSEG_BWE-->     Goods Receipt for Purchase Order: Movement Type
    M_MSEG_BWF-->     Goods Receipt for Production Order: Movement Type
    M_MSEG_LGO-->     Goods Movements: Storage Location
    M_MSEG_WMB-->     Material Documents: Plant
    M_MSEG_WWA-->     Goods Movements: Plant
    M_MSEG_WWE-->     Goods Receipt for Purchase Order: Plant
    M_MSEG_WWF-->     Goods Receipt for Production Order: Plant
    M_RAHM_BSA-->     Document Type in Outline Agreement
    M_RAHM_EKG-->     Purchasing Group in Outline Agreement
    M_RAHM_EKO-->     Purchasing Organization in Outline Agreement
    M_RAHM_WRK-->     Plant in Outline Agreement
    Q_TCODE     QM -->         Transaction Authorization
    S_ADMI_FCD-->     System Authorizations
    S_ALV_LAYO-->     ALV Standard Layout
    S_BDS_DS-->     BC-SRV-KPR-BDS: Authorizations for Document Set
    S_BTCH_ADM-->     Background Processing: Background Administrator
    S_BTCH_JOB-->     Background Processing: Operations on Background Jobs
    S_CTS_ADMI-->     Administration Functions in Change and Transport System
    S_DATASET-->     Authorization for file access
    S_DEVELOP-->     ABAP Workbench
    S_DOKU_AUT-->     SE61 Documentation Maintenance Authorization
    S_GUI-->                     Authorization for GUI activities
    S_OC_DOC-->     SAPoffice: Authorization for an Activity with Documents
    S_OC_ROLE-->     SAPoffice: Office User Attribute
    S_OC_SEND-->     Authorization Object for Sending
    S_PACKSTRU-->     Internal SAP Use: Package Structure
    S_PRO_AUTH-->     IMG: New authorizations for projects
    S_RFC-->                     Authorization Check for RFC Access
    S_SCD0     -->                Change documents
    S_SPO_DEV-->     Spool: Device authorizations
    S_TABU_DIS-->     Table Maintenance (via standard tools such as SM30)
    S_TCODE     -->                Transaction Code Check at Transaction Start
    S_TRANSLAT-->     Translation environment authorization object
    S_TRANSPRT-->     Transport Organizer
    S_WFAR_OBJ-->     ArchiveLink: Authorizations for access to documents
    V_LIKP_VST-->Delivery: Authorization for Shipping Points
    V_VBAK_AAT-->Sales Document: Authorization for Sales Document Types
    V_VBAK_VKO-->Sales Document: Authorization for Sales Areas

    Have you executed a trace while a functional user executes the transaction code for the specific parameters? (i.e. document type). The trace will then show which objects are being checked; then look at the object documentation in txn Su21 to determine if there are any ways to restrict on the particular value; in some cases, if the authorization group field is being checked, additional configuration is needed in order to implement the security (Su21 will explain in detail for the particular object).

  • APP RUN Based on document type

    HI SAP Gurus.
    While invoice posting(F-43/MIRO) User use Doc type KR & RE(may be different doc type instead of KR)..
    Now he want run APP for only KR document type....
      Please give me solution......

    Hello-
    In F110, after entering data in parameter tab in the next tab "additional fields" under selection criteria drop down where it says field name. A pop up box will show and here select "Document" and hit enter and it will list all the fields available for selection. You can choose document type and hit enter. It will now populate in the field name and for values enter what ever document type you want. In your case, enter KR and go to next tabs. By doing this, payment program will only pick documents that have the document type you entered. This way you can isolate payment runs by document type.
    Hope this helps.
    Shail

  • Changing std title based on Document type while creating po(me21n)

    Hi experts,
    when we enter me21n,there the std title is Cretae purchase order.Here requirement is whenever i select document type as standard po then in std title it should display "Standard po created". Changing the std title in me21n based on selected document type.for eg:if i selected doc type as "stock transport ord" then in std title bar system should display "Stock transport ord po created".
    Thanks in advance.

    Hi,
    You can define allowed item categories for purchase order and doc type config for po
    SPRO>MM>PUR>PO>DOC TYPE>SELECT DOC TYPE>ALLOWED ITEM CAT
    BR
    Diwakar

  • Posting of MIRO transaction with other document type

    Hi Every Body,
    We want to make MIRO with other document type for some particular transaction , not with RE , we have defined other document type VR , also number range but how to link it in MM part because MM number range same for RE and having provision for  only one number range . Can we define MM no. range also separate & other wise with same MM no. how we can linl VR doc type no. range..
    Please give some idea
    Thanks,
    Dharmveer

    Hi,
    Thanks for reply
    We mapped the system as suggested by you , but we get posting termination most of time while doing MIRO & changing document type VR in deatil tab in header part.
    Please suggest me, hoe we can create transaction variant of MIRO then we can process such activites apart from standard.
    Thanks,
    Dharmveer

  • Filtering data at the Source based on Document Type for 2LIS_02_ITM

    Hello All:
    I am trying to filter data based on certain purchasing document type for 2LIS_02_ITM and _SCL datasources.
    I want to filter in R/3 instead of in BW
    Any ideas on how to go about ?
    Regards
    Vijay

    Vijay,
        you are getting data for all the Document Types, so no need of any select Statements.
    use this code in your User Exit. and let me know if you have any questions.
    CASE I_DATASOURCE.
      WHEN '2LIS_02_SCL'.
        Delete C_T_DATA where BSART eq ‘C’.
    ENDCASE.
    Note: you need to give Document types which r not required fro BW extraction in EQ.
    'C' i gave for test... give the document types which r not required for you.
    all the best.
    Regards,
    Nagesh Ganisetti.

  • Triggering of Workflow for park documents based on Document type.

    Hi,
    I have activated workflow for park documents but it is triggering for all document types. Client dont want workflow for Customer park documents.
    I assigned SA document only in "release approval path" but it is triggering for all document types.
    Please help me.
    Thanks.
    Azeem

    Hi Azeem,
    We have the same requirement. Would you mind sharing how you were able to accomplish this?
    Thank you,
    Mark.

  • Schedule line display based on Document Type

    Hello Friends,
    I need to display the last or the latest schedule line for the particular document type.
    The document type and Schedule line both the objects belongs to NUMC data type.
    For EX: for doc type 5555 the schedule line may have from 111 to 1009.
    In between some schedule lines may be deleted. But i need to display only 1009 for the document type!!
    Can some one suggest the solution for this!!!
    Thanks and Regards
    Sri

    Hi Sri,
            you want to disply no.of schedul line numbers having particular Document type.
            means suppose doc type DR having 3 Sch line num
                  Doc Type         Schedule line Num    loads
                      DR                    1007                   1st
                      DR                    1009                   2nd
                      DR                    1010                   2nd
                      DR                    1007                   3rd
    the above scenario you want to disply Particular doc type having 4 Sch line num
       now you want to disply number '4' or
       you want to disply latest Scheduline number of DR 1007.
    Could you tell me Clearly I will help to you.
    Thanks & Regards,
    Ram

  • Line item posted?? document type wise

    Hi all sap guru's
    hwo to findout how many lines item posted for each doucment type???
    regards
    ss

    Hi,
    Goto T.Code:FB03
    Then click on Documents list
    Then you can give the inputs like company code,Fiscal year,Document type, posting date.
    Then you can get the list of documents posted based on document type.
    all the best
    Prasad

  • Document type with posting level 12 not being carryforward

    Hi gurus,
    We are now implementing SEM-BCS 6.0 in the BI 7.0 server.
    We have a document type u201CMIu201D which properties are:
    Posting level: 12
    Balance check: 0 error when balance note equal to zero
    Application: Other
    Posting: Manual posting
    Inversion: No automatic inversion
    The problem is that when we execute the Balance Carryforward in the subsequent year this is the only document type that is not being carryforward.
    Why is this happening?
    Thanks for your help.
    Best regards.

    This is by design
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/0c/ab0240536fe369e10000000a155106/content.htm
    "Data records for preparatory postings for consolidation group changes are neither translated nor carried forward."
    I'll try an example...
    Company A is sold from company 1 to company 2 in June (EoP)
    For periods 0 - 6:
    BCS reports company A's balance sheet under company 1
    BCS reports company A's income statement under company 1
    starting period 7
    BCS reports company A's balance sheet under company 2
    BCS reports company A's 0 - 6 income statement under company 1
    BCS reports company A's 7 income statement under company 2
    this is managed through the posting level 02 12 and 22 document types, as well as PL30 if using CoI.
    Assuming the period of first consolidation and period of divestiture were set correctly in the groups for company 1 and company 2, BCS wants to read all 0 - 6 data under group 1 and all 7 + data under group 2.  This is obviously incorrect from an accounting standpoint and the PCC postings correct that.
    So BCS books a PL02/12/22 in group 1 to zero out the balance sheet.  It then books another set of entries in group 2 to write up the entire balance sheet in the new group.
    However, once you get to the end of the year and run your BCF, the entire balance sheet is now sitting in period 0. The system is able to report company A's balance sheet under group 2 withou the aid of the PCC documents.  Therefore, the system does not roll these documents forward into the new year.
    The PCC documents were only required because of the periodic nature of the BCS data storage vs. the LTD nature of the balance sheet for reporting.  Once the full LTD balance is available in a single period, as is the case just after a BCF, the PCC documents are no longer required.
    Anyway, hope that made some sense.  If not, I'd encourange you to create an Excel sheet replicating how BCS stores the data in the cube, perfrom a divestiture, and see why the system is not carrying forward the documents.  This is how I came to understand it.
    Now, if you're doing something "non-standard" with the PL12, all bets are off
    Good luck,
    Chris

  • Delete house banks, document types, posting keys, etc...

    Hi Experts,
    I have a some issues in my project:
    Banks:
    - the company created a lot of payment methods, i want to delete all and create only the neccesary. The question is if I don't have problems with links between information that already exist in the system.
    - The house banks and bank determination have a similar problem, inneccesary or old data and create just the neccesary.
    Document types and posting keys:
    - Have a lot of inneccesary document types and posting keys, I just want to left the standard types for document and posting keys.
    My problem is that SAP have data for the operations, the changes will be necessary for the 01.01.2010, so please tell me if i don't have problems if I delete the innecesary data and start in the begining of the year with this changes.
    Thanks

    HI,
    1. You can create required payment methods for your company code and delte all other payment methods and assign this new payment method in all your Vendor Master data in place of earlier payment methods.
    Ensure that there should not be earlier payment methods in vendor master data.
    2. By default standard SAP provided important Document types and Posting Keys. you can use existing Document Types and Posting Keys. or else you can create your own document types and posting keys. But  better to use systemd defined existing Document types and Posting keys for good business practice.
    Thanks
    Chandra

  • Document types irrelevant to WF

    Hi all,
    I'm working on different WFs about FIPP object and I need workflow functionalities only for some document types (e.g. CA, TX, KR).
    In customizing (SPRO,Finance) I have set the "Posting Release" flag and it triggers the FIPP.created event, but I don't want the "Release necessary" flag in Workflow tab (in the document) to be set since it disables the posting function. Even if I have developed a custom WF with the FIPP.WFReleaseReset method (and a start condition), the Post command is still disabled as if workflow functionalities continue to be enabled.
    I'd like to avoid completely the workflow tab in the document for these types, but I don't know if it's possible.
    There are no OSS notes about it.
    Can you please help me to solve this issue?
    Best regards,
    Angelo

    Angelo,
    Instead of setting the "Posting Release" flag, you can use Business Transaction Events (BTE) to trigger the events for the FIPP object. Please search this forum as well as SAP-WUG forum (read the sticky at the top of this forum by Alan) for BTE usage. Depending on your SAP Version, you can either use Start Conditions or Check Function Modules for starting the WF based on document type.
    Let me know if you need more information.
    Cheers,
    Ramki Maley.

  • Document Type restirction by company code

    Hi All
    We have a scenario where they are different companies with a group company and DMS is installed in all companies under single client
    While defining Document types, one group company should not be able to view the Document type of another..
    We can give authorisation based on Document types, but they dont even want to see the Doc, type name of the other company while using search option..
    How is the possible?
    Can we differentiate Doc types by company code ?? so that only Doc types specific for one particular company only will be reflected while using F4 , Search option??
    Please suggest
    Regards
    Aby

    Hi,
    There are many authorization objects like C_DRAW_TCD, C_DRAW_TCS, C_DRAW_STA & C_DRAW_DOK, which might be helpful in your case.
    Regards
    Surjit

  • Document Type for Interest Postings

    HI all,
    I need to assign a seperate document type (other than DA) for interest postings from F.2A, F.2C, FINT and so for all interest postings.
    Could any none guide me where to do the configuration for assigning document types for interest postings.
    Thanks,
    DSK

    Hi
    You can assign any document type you want to use for Interest posting.
    Use T code OBV1. This will take you to interest posting screen Goto Main Menu --> Goto --> Document type here you can assign Document type to the Application.
    This will work. I used a separate document type for interest posting on my project.
    Thanks
    Arshad

Maybe you are looking for

  • Error while opening JDBC connection in external WLS

    Hi I created the ADF application on Jdev11.1.1 version.i deployed the application on External WLS 10.3.i got deployment successfull.but when testing from browser,i got the following error. Messages for this page are listed below. Error      Error whi

  • Macbook powers on but is stuck on white backround screen w/ apple icon

    hello, i was wondering if someone would be kind enough to point me in the right direction where I can find step by step instructions on how to solve my macbook issue and have OS running again? Basically I just turned on my Macbook and a white backgro

  • When I add a BB contacts and they accept me, their names still appear in Pending category?

    I add my friend last night using his BB PIN.  He accepts me already, but his name is still under my Pending group.  Also, when I accept other people their name still go into the Pending group!  Can you please tell me why and how to solve it?  COuld i

  • I could really use a second set of eyes on this VPN config. :)

    Hi all, I am attempting to setup a client -> server VPN using IOS 12.4, and Cisco Client 5.x. At this point, the client does connect, however, I cannot ping, or send / receive data over the VPN.  I am initially attempting a split-tunnel config, as th

  • Webparts deleted from the Web Part Gallery

    We have a situation in SharePoint 2010 where a Site Collection Admin accidentally deleted most of the web part definitions from the Web Part Gallery in one of our Site Collections.  I know I can use the "Populate Gallery" button on the screen that is