CP and BP is not being created in E-Recruitment after PFAL

Dear Experts,
I need your valuable insight into the below issue:
We are implementing SAP E-Recruitment in our company and we have a stand alone system for e-rec, i.e. I2-B scenario. Release 604.
We defined the process model, filter groups as described in note and many threads here. We are able to transfer (distribute) objects O, S, C, Q and QK using PFAL. When I am trying to distribute object P (IT0000, 0001, 0002, 0006, 0009, 0105 and 1001), object P is getting created with PA infotypes but system does not create the CP, BP and NA objects in E-Rec. My understanding after reading the documentation and some threads on SCN is that system should create these objects (CP, BP and NA) on distributing Object P from ECC.
Do we need to Run the HRALXSYNC program in E-Recruitment to create these objects? We thought of running this program as well but the Employee Check box in the selection screen of the program is disabled. Even after implementing BADI HRALX_HRALXSYNC_BADI it remains disabled.
Any sort of help would be greatly appreciated...
Kind Regards
Syed Aijaz

Dear Salil,
Thank you for the quick response.
I had considered maintaing the number ranges for CP in E-Recruitment, but had two concerns/doubts about it:
1. We have already generated CP in ECC for all Persons and the numbers are taken from an internal range Subgroup ($$$$) and CPs have their own IDs starting with 5XXXXXXX. Now if I maintain a number range in E-Rec, different from this, would that be an issue? I understand that we need to have the same CP ID in both the systems (ECC and E-Rec). Kindly clarify.
2. We have not maintained any number ranges for other objects (O, S, C, Q, & QK) in E-Rec system. But system has created these objects in E-Recruitment on running PFAL.
Currently we are doing all these settngs in Sandbox system only.
Kindly advise....
Thanks
Edited by: meetaijaz on Feb 1, 2012 9:38 AM

Similar Messages

Itunes 11 shows zero photos in Aperture and ApertureData.xml not being created in library

I've tried to do some trouble shooting of this problem. I've rebuilt permissions, I've repaired and rebuilt the Aperture library, I've made sure sharing previews is always for iLife and iWork, I've created a new library, switched to it and switched back and I can't get iTunes to see my albums and pictures from my iPhoto library when I try to sync through Aperture. What I have found is when I created the new temporary library and loaded one pic into it, a file in the package contents called ApertureData.xml is created, which isn't created in the iPhoto libary, it has AlbumData.xml. iTunes does recognize the temp library and photo. I deleted the AlbumData.xml, but it was just recreated. It seems Aperture is supposed to be creating a file that it isn't. Any help would be appreciated, I'm trying to migrate from iPhoto to using Aperture exclusively to manage photos and sync with devices. All software is up to date. Thanks.

in case anyone searches and finds this question, but importing by iphoto library to aperture into a new library, I fixed the problem. I do not know how to fix the original issue of the aperturedata.xml not being created in the origianl iphoto library.

Local and Roaming profiles not being created

Hello all,
I'm in need of help and I wondered if there was anyone out there with some suggestions.
The problem is that one of our sites has Netware 5 and Zfd3.2 and there are no longer any roaming profiles or local profiles being created. Volatile user is not used. Roaming profiles go to the users home directory. All file rights are fine. DLU is still working. Novell client on W2K workstations is 4.90. All other sites appear to be OK.
I suspected that the user policy was at fault and so created a test user package and associated a test user to it = same result.
I have checked from top to bottom and compared all settings to other sites and can see no difference or anything unusual. I've been working on this for 2 days now and I'm going grey and bald.
Any suggestions anyone?
I'll buy a pint for anyone with the answer - LOL.
Thanks in advance
Alan Graham
email: [email protected]

elvisgraham,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

[svn:bz-trunk] 23143: Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method .

Revision: 23143
Revision: 23143
Author:   [email protected]
Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
Log Message:
Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method. Promote it to be at the top instead of at the bottom.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

Revision: 23143
Revision: 23143
Author:   [email protected]
Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
Log Message:
Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method. Promote it to be at the top instead of at the bottom.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

When I try to open Lightroom5 (creative cloud) I am taken to the Select Catalog screen but I have no catalogs and I am not being allowed to create new ones. What can I do?

When I try to open Lightroom5 (creative cloud) I am taken to the Select Catalog screen but I have no catalogs and I am not being allowed to create new ones. What can I do to correct this?

This could be a read/write permissions issue with the destination folder for the catalog. Use your favorite search engine to search for changing disk permissions. What operating system are you using?

XMP files not being created with DNGs...

I'm used to using Bridge with ACR to process Nikon NEFs. But a recent camera update has me experimenting with converting the D3's NEFs to DNG files and editing them with CS2 and Bridge 1.04 which works better on my system. I've also experimented with CS3 and Bridge 2.1.1.9 with the same DNG files.
In both cases XMP files are not being created when working with DNG files. I have enabled "Save image settings in : Sidecar ".xmp" files" turned ON. But they do not seem to be generated and I assume the ACR adjustments are being embedded in the DNG file. Meanwhile doing edits on NEF files continues to create .xmp files as expected.
I find .xmp files to be very useful and I'm wondering why they're missing with DNG files? Are they hiding somewhere other than in the same folder that the images reside in?
Thanks.
Russell

> The information contained in the XMP file is stored in the DNG file so there is no need for a separate file.
Aww, yuck!! That's a real drag...
When editing lots of files (yesterday's shoot produced 8GB) I back everything up to off-line storage and then, after doing all my edits and crops in ACR, I only have to copy over the small XMP files which takes no time at all.
So if I re-edit the DNG with ACR I have to re-copy ALL the files again to the off-line storage.
I used to sometimes even save 2 versions of the xmp files when I needed 2 different crops of the same images, such as doing a wide screen 'cinema' crop for a corporate client's Intranet presentation of their event, as well as more standard crops to be used for their newsletters.
Guess I won't be using DNG any more..
Thanks for the help Kees :-)
Russell

Group Folders not being created

Hi folks,
i think this is a simple question: i got Mac OS X 10.4.4 Server with OD and Mobile Homes configured. I set up some custom Groups but the Group Folders are not being created automatically. I think there is a terminal command to do this. Does anyone know that command?
Greets

Is it the CreateGroupFolder command?
(15297)

Inbox folders not being created from msf files

Last week, I noticed that my Inbox folder files weren't appearing in my profile. I posted a generalized question here: https://support.mozilla.org/en-US/questions/996903
The response I received didn't help that much. The folder I created appeared on the remote mailbox as empty folders.
My mail account is synced via IMAP to a remote Zimbra mail client using STARTTLS. I can view my Inbox. The other folders in my Inbox account are not visible. I can send and recieve messages from my INBOX.
When I select "Manage folder Subscriptions" In the account options, I can see the folders. When I select them, and click the "Subscribe" button, nothing happens.
Inspecting my IMAP directory, I see the following structure:
~/.thunderbird/13zr0oo0.default/ImapMail/mail.<zimbra_account>.com:
-rw-r--r-- 1 matthewe matthewe 1238 May 2 10:38 Archives.msf
-rw-r--r-- 1 matthewe matthewe 1235 May 2 10:38 Drafts.msf
-rw------- 1 matthewe matthewe 47500385 May 2 09:56 INBOX
-rw-r--r-- 1 matthewe matthewe 375885 May 2 10:36 INBOX.msf
-rw-r--r-- 1 matthewe matthewe 25 May 2 08:58 msgFilterRules.dat
-rw-r--r-- 1 matthewe matthewe 1233 May 2 10:38 Sent.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 10:38 site-errors.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 09:59 Templates.msf
-rw-r--r-- 1 matthewe matthewe 2275 May 2 10:33 Trash.msf
The msf files are created when I click the "Subscribe" button but subsequent Mail files containing the mail data are not (note that non-msf files exist only for "INBOX".)
Removing .msf files and restarting Thunderbird has no affect.
When I launch, the errors console reports the following three errors:
"Could not read chrome manifest 'file:///usr/lib/thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
-- There is no chrome.manifest file in my filesystem under /usr/lib/thunderbird/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}"
"While creating services from category 'profile-after-change', could not create service for entry 'Disk Space Watcher Service', contract ID '@mozilla.org/toolkit/disk-space-watcher;1'"
This is reported as https://bugzilla.mozilla.org/show_bug.cgi?id=883621 and has been resolved at https://bugzilla.mozilla.org/show_bug.cgi?id=895964 but my system still throws the error. (I have plenty of disk space. Permissions perhaps?)
[JavaScript Warning: "Calendar https://mail.zimbrahostedemail.com/home/matthewe@<zimbra_client>.com/Calendar has a dangling E-Mail identity configured."]
I'm not sure what that means.
I am using Thunderbird 24.5.0 on Ubuntu 13.10

Is your question about files not being created, or because you cannot send and receive mail, or both?

Internal Order not being created in cProjects-Accounting Integration

Dear All,
We are working on cProjects 4.0 with ECC 6.0,
Trying to do Accounting Integration.
For only one Project I am able to create Internal Order,
But I am getting following error.
Cost/revenue rate YP002 is not valid in organization 00000000
Inspite of assigning these rates to the organization 00000000
For other projects, when I click on accounting:
I get following error
"Single-Obj.Controlling on InternalOrders 0188993B3E343947A046B554FD886E03 000006000032 does not exist"
When I go to Controlling Cockpit, I see this Internal Order not being created.
Have revisited all settings, project type, etc.
How do I go about this.
Kindly help,
Navendu

Dear All,
I was able to solve the one of the problem, with the following settings,
Assign Cost Elements & Activity Types:
Choose Organization, Start & End Dates, Cost and Revenue Elements, Currency.
The start and end date of the cost/ revenue did not fall within the start and end date of the Organization.
Regards,
Navendu Shirali

Tlanes not being created for all locations for one product

Hello Experts - I need some advice on the following situation:
We have a set of products where tlanes are only being created for 3 locations out of many. What would cause the tlanes to not be generated for all locations if all master data elements are present? We have a valid inforec, mrp views, etc. I can't see anything different with the 3 locations that are working correctly.
Any help would be much appreciated.
Thanks!

Thank you for your resopnse:
To answer your questions, yes, we have done all of these things and the tlanes are still not being created. We have been using SPP for 6 months and this is the first time we've seen this problem. Do you have any other suggestions or is there any more information I can provide you that would be helpful in solving.
Thanks in advance for your advice.
AAF1999

Class not being created when running from jar

Hi all,
Tech info first:
IDE: Sun Java Studio Enterprise 8
Plaform: windows xp
I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        Main receiver = new Main();
        receiver.getPropertiesFromFile();
        //Create and set up the window.
        frame = new JFrame("R�FILOG RFID Empf�nger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(receiver.mainPanel);
        frame.setJMenuBar(receiver.createMenuBar());
        frame.addWindowListener(receiver);
        frame.setLocationByPlatform(true);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        portListener = new RFIDReaderComm(receiver, "COM3");
        portListener.getConfiguration();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
thanks in advance.

Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
Updating my computers CLASSPATH with the relevant paths - not working
Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
Tried updating the manifest.mf in the following way:
Created a text file Manifest.txt with the lines:
Class-Path: RXTXcomm.jar
Class-Path: BrowserLauncher2-10rc4.jar
ran the command (in the same directory as Manifest.txt):
jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
META-INF/
META-INF/MANIFEST.MF
classes/
classes/CRCCalculator.class
classes/Main$1.class
classes/Main.class
classes/RFIDReaderComm.class
classes/URLDialog$1.class
classes/URLDialog$2.class
classes/URLDialog.class
the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
Please, can anyone help me?

Nodes not being created?

I am having a problem with my laptop. I had this issue with my USB stick which was fixed by manually creating nodes (discussed here http://bbs.archlinux.org/viewtopic.php? … highlight=). However, upon trying other usb devices that work just fine on my desktop, I have the same result as I did with the usb stick. The nodes are not being created in /dev/ even though dmesg shows that the usb device was connected. I have a custom kernel and hotplug is NOT installed.
Any ideas on where to look with this? I have tried reinstalling udev and upgrading the kernel. Thanks for any help,

jftaylor21 wrote:
hey jskier, what exactly did you have to enable in the kernel to get it working? I am having the same problem and cannot figure it out.
Thanks.
First, my apology for not mentioning what I did. My laptop is in for repairs, but from what I recall I just enabled CONFIG_HOTPLUG located at General Setup >> Support for hot-pluggable devices. I use 2.6.14, so if you can't find it there it may be somewhere else for different kernel versions. Good luck!

IOR files not being created

I'm currently experimenting with using the InDesignServerService (windows service) as our means of starting and managing instances of InDesign Server.
I seem to have it working for the most part but the IOR files are not being created and I cannot figure out why. I have been messing around with the command line arguments in the InDesignServerService MMC for quite some time with no luck. The instances seem to startup fine and show "running" in the event viewer info message.
Command line arguments used -
-pluginpath Server/Corba -iorfile c:\IDSQueues\Default\ior1.txt -previews
I've made sure the account the service is running under has writes access to the ior file path. I truely don't know what else to try or why this is happening.
Any help would be great! thanks!
FYI
Using InDesign Developer Server CS5 (for testing) on Windows 7 64bit.

Thanks for the response.
However, this will not work because I am using InDesignServerService to startup the instances. With the service, there is a field to specify a port number in so you do not include it in the command line.
Also, I have tried specifying this in the Command Line argument as well -
InDesignServer -pluginpath Server\Corba -iorfile c:\IDSQueues\Default\ior1.txt -previews
InDesignServer.com -pluginpath Server\Corba -iorfile c:\IDSQueues\Default\ior1.txt -previews
I've also tried
InDesignServer -iorfile c:\ior.txt -pluginpath Server\Corba
which is what the Intro to InDesign Server PDF says to use and it does not work.
I have tried many variations and nothing works. The IOR file is still not created.
I'm still trying to solve this, any help would be great!
Thanks,

User Profile Disk not being created

Hi,
I created a new 2012 VDI collection. Things seems to be working fine except for the User Profile Disks are not being created. From my understanding a .vhdx prefixed with the user's SID is supposed to be created when the user logs into one of the virtual
machines from the collection. I can see that a UVHD-template.vhdx" was created correctly but when logging on to one of the deployed virtual machines from the pool there is no other .vhdx files (except the template).
From what I've read the virtualization hosts must have write access to the share (they do). I can't seem to find any other requirements. I've searched through event viewer and found nothing. I'm not sure which logs to check on which server.
Anyone have any ideas what I'm missing?

Hi,
Thanks for your post in Windows Server Forum.
Kindly follow the below mention article and check the necessary steps for creating UPD, try to create new UPD.
1. Working with User Profile Disks on Session-Based Desktop Deployments
2. Easier User Data Management with User Profile Disks in Windows Server 2012
Hope it helps!
Thanks,
Dharmesh

Replenishment random storage -TO is not being created

Hello,
Fixed Bin replenishment
I am implementing the same above process for random storage.I have configured everything as mentioned above and made sure the stock is available for replenishment.For some reason the Replenishment TO not being created during the picking confirmation.
My random storage is SU managed.This storage type needs to be replenished from an open storage which is not SU managed. Is there any probem in the pelletization during the TO creation? Did i do something wrong having the random storage as SU managed?
Please suggest..

Hi Pranath,
Check the following (masterdata):
- the material must created for the replen st as well
- enter your max bin qty, min bin qty, round qty, replen qty
Chek the following config:
- Define Stock Transfers & Replenishment control
- Define Replenishment Control for Storage Type - Make sure you have "Replen Method" = 2. Did you specify a replen movement type? If not, I would suggest this...keeps everything tidy.
I remember from my initial testing that it didn't work, because my stock level was already below my min stock level. I added stock to my ST and moved it out again (with LT10 for testing) to a different ST. The replen TO was created automatically.
Let me know how it goes.
Hein

CP and BP is not being created in E-Recruitment after PFAL

Similar Messages

Maybe you are looking for