CP Segment - Missing Segments-BIGS2- abap short dump
hi,
i am facing a very typical problem, when i copy character set 8300 from 4.6c to ECC 6 and do the SCP, i have not problem in consistency check but when do the copy of 8300 ->9300 in 4.6c and then export to ECC6 and then run the SCP i have the error BIGS2 - Doesnot exits and when tried to check, it is throwing ABAP DUMP, please find the attached file for more detailed error update
I dont know how to attached the screen shot of the error, please let me know if any more information needed.
Hello,
as of WebAS 6.10. the structure of code pages changed.
For that reason, all customer defined code pages (i.e. code pages starting with 9) need to be converted to comply with the new structure, otherwise errors might occur. As you copied SAP Code Page 8300 to 9300, you have to convert this code page with report RSCP0126. Please refer to SAP Note 485455 for details. The application help in transaction SCP also contains a short description.
Hope this helps.
Best Regards,
Michaela
Similar Messages
-
ABAP short dump with "CNTL_ERROR"
Hi,
I am getting an ABAP short dump with "CNTL_ERROR" while using an input script. What do I do?
Thanks,
Sreekar.Hi,
Newer versions of SAP GUI and R/3 include external controls called as ActiveX (OCXs). ABAP code internally issues some commands to flush and refresh these controls. Since, when using GuiXT and input scripting, these controls are not created, and ABAP dumps. Use keyword "Enable controls" (without quotes on a separate line) in a screen block that has an ActiveX control.
Example:
Screen SAPLCOIH.3000
Enter "/Menu=4,1,5"
Screen SAPLSP01.0100
Enter "=No"
Screen RIPLKO10.1000
Enable controls
Set F[Group] "UG"
Enter "/8"
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
Hi All
We had do done a DBEXPORT of our R/3 4.6C while doing there was a increment conversion pending and we got error during the export, we finished the conversion and then started the DBEXPORT again and it completed successfully, however after this we are receiving ABAP Short dumps which says DBIF_RSQL_INTERNAL_ERROR, Internal error when accessing table "T179 ". Practically for any new entry we do in database.Kindly suggest how to go about.
Regards
ArunHi Micheal
we had done an incremental conversion for DBTABLOG table which is forbidden also was not complete,so we completed the conversion and removed a field which was added in the table (this was cause of error),we removed the field and activated teh table and the short dump was resolved.
Anyway thanks for your reply.
Arun -
ABAP short dump error while creating an invoice
Hi All,
We are creating a delivery(Unit is EA) for the material for which the Unit Conversion is maintained as 1CS = 48 EA. So while creating a delivery If I maintain the delivered quantity is less than 24, I am not able to create an invoice.It's throwing an ABAP short dump error BCD zerodivide run time error.
If I deliver greater than or equal to 24, then the invoice is created without any issue
I have checked if there is any CMIR record but no record is maintained.
Can anyone help me out on this?
Regards,
ManjunathHi Manju,
Can you post the dump screen shot, which should contain the source code for that dump.
Regards,
Krishna -
ABAP short dump when loading data into Infocube
Hello All,
I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
I ran the code to compress the Infocube, no improvement still getting the same error.
Error Analysis:
A raise statement in the program "SAPLRSDU_PART" raised in the exception.
Internal Notes:
The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
The internal operation just processed is "FUNE"
Advance thanks !!!
SivHello Siv,
try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
SAP notes that might help: 385163, 590370
Regards,
Marc
SAP NetWeaver RIG, US BI -
ZGUIXT16 produces an ABAP short dump
Hi,
The program ZGUIXT16 (intended to generate the local value help files) always stops and produces an ABAP short dump. What could be the reason?
Thanks,
Varsha.Hi,
ZGUIXT16 uses the SAP standard function CHECKTABLE_GET in order to generate the local value help. For some reason, this function aborts for several domains, depending on the R/3 release.
Solution: In ZGUIXT16 some domains are already excluded:
Exclude some domains (error in SAP value list generation):
CHECK DOM-DOMNAME NE: 'HIERANM', 'IM_POSNR', 'IWEXTSYMBL', 'P02_BTRTE'.
Here you can enumerate domains that lead to errors, and then restart the program.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
SPAM update of DMIS stalled with ABAP Short Dump
Hi Experts,
Was wondering if someone could help me. I am trying to install DMIS on my NW 702 system. The installation sort of halted half way and now I am just not able to get into SPAM. Everytime I try to start SPAM the system loops for a good few minutes and it short dumps as below:
Category
ABAP Programming Error
Runtime Errors
TIME_OUT
ABAP Program
SAPLOCS_SEMAPHORE
Application Component BC-UPG-OCS
Trigger Location of Runtime Error
Program SAPLOCS_SEMAPHORE
Include LOCS_SEMAPHOREU02
Row 85
Module type (FUNCTION)
Module Name OCS_QUEUE_SEMAPHORE
55 * OCS is locked, remember this
56 ev_locked = on.
57 * check if OCS is locked by other (OCS) tools
58 IF iv_tool = space. "maybe were are called in batch, check
59 IF sy-batch = off OR
60 ls_pat10-btch_state NA gc_batch_states.
61 * IV_TOOL = space but no batch processing
62 * -> foreign lock, you are not allowed to proceed
63 cs_sema = ls_pat10.
64 RAISE foreign_lock.
65 ENDIF.
66 ELSE.
67 IF ls_pat10-ocs_tool <> iv_tool.
68 * foreign lock, you are not allowed to proceed
69 cs_sema = ls_pat10.
70 RAISE foreign_lock.
71 ENDIF.
72 ENDIF.
73
74 * we are either in batch processing or IV_TOOL matches PAT10
75 * --> own lock, return it
76 IF iv_read_only <> space.
77 cs_sema = ls_pat10.
78 EXIT.
79 ENDIF.
79
ENDIF.
80 * update it
81
ls_pat10 = cs_sema.
82
ls_pat10-responsibl = sy-uname.
83
ls_pat10-imple_date = sy-datum.
84
ls_pat10-imple_time = sy-uzeit.
>>>>>
UPDATE pat10 FROM ls_pat10.
86
cs_sema = ls_pat10.
87 ENDIF. "sy-subrc = 4
88
89 ENDFUNCTION.
4 FUNCTION
SAPLOCS_SEMAPHORE
LOCS_SEMAPHOREU02
85
OCS_QUEUE_SEMAPHORE
3 FUNCTION
SAPLOCS_BATCH
LOCS_BATCHU07
186
OCS_DELETE_BATCH_SEMAPHORE
2 FORM
SAPMSPAM
MSPAMF06
190
READ_N_CHECK_BATCH_JOBS
1 MODULE (PBO) SAPMSPAM
MSPAMO01
776
READ_BATCH_JOBS
Would appreciate if someone can help and has faced something similar.
Regards,
ManishHi
The Abap programs get a timeout when trying to update table PAT10 ( OCS Semaphore).
Check in SM12 if there are locks on that table
Check also that table contents, there should be only one entry, what is in field OCS_TOOL ?
DMIS should be installed using transaction SAINT (in client 000) and not SPAM.
Regards
1468391 - Installation and delta upgrade of DMIS 2010_1 -
ABAP short dump after BI upgrade
hi all,
While executing any program in SE38, it is giving Short dump while same program executing in SA38, it is executing .
Firstly, we got short dump in TCode - RSRT, while executing report.
Regards,
Prasad
Edited by: Prasad Mahindrakar on Apr 14, 2010 8:15 AMKindly find the Error, which is generating at time of Report Execution
Error Analysis:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
caught in
procedure "WRITE_DATA" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely "GP42LSZTOVG57DGEB7BO763P3PN ".
However, program "GP42LSZTOVG57DGEB7BO763P3PN " does not exist in the library.
Possible reasons:
a) Wrong program name specified in an external PERFORM or
SUBMIT or, when defining a new transaction, a new
dialog module or a new function module.
b) Transport error -
Runtime errors COMPUTE_BCD_OVERFLOW
Exception CX_SY_ARITHMETIC_OVERFLOW
I want to move Currency variable with 4 decimals to another currency variable with 2 decimals. Please advice me with a suitable solution without causing short dump.
Appreciate Your Help in Advance.
Thanks.
Kannan.SAP catch the exception like this :
CATCH SYSTEM-EXCEPTIONS conversion_errors = 1
arithmetic_errors = 5.
xkwert = xkomv-kwert * 1000 * xkomv-kpein / komp-mgame.
xkomv-kbetr = xkwert.
ENDCATCH.
IF sy-subrc = 1 OR sy-subrc = 5.
xkomv-kbetr = 0.
xkomv-fxmsg = '802'.
komp-fxmsg = '802'.
ENDIF. -
Hi BW experts,
when i goto to t-code st22, i find number of runtime errors with name of runtime error as " Message_type_X" and also when i open a msg it says "the current application detected a situation which really shld not occur. Therfore a termionation with a short dump .......""
Can anyone suggest whats happening?? Thank you
DaveHi Dave,
Now when you know the load has failed for the load you did from 1 infoprovider to other then go to the monitor of the failed request and then under status tab you will have short dump pushbutton at the bottom click on that which will take you to the dump after giving R/s ID and p/w there you check the error reason of the dump as said under error analysis.
Or go to RSMO there check out the load for today and try identifying the data target you loaded and then follow the above steps.
Hope it will help..
Regards,
Rohini -
ABAP short dump when posting to FICO
We are testing payroll on a upgraded version of our live system and recieving an abap error stating an issue with object "COSTS" . This is only occuring when trying to post the results to FICO and only for one particular employee. On searching we have found SAP note 890828 which seems a rather larger problem than just affecting one employee.
Anyone have any idea's?Hi
The ABAP dump should be as follows:
Runtime errors CONNE_IMPORT_WRONG_STRUCTURE
Exception CX_SY_IMPORT_MISMATCH_ERROR
Error when importing object "COSTS".
You need to follow the instructions in note 890828.
The CLASS CL_HR_PAY_RESULT_GB is used by RPCIPE00 in release your upgrade release
You have two choices in the note.
1) a modification in SAP standard to "ignore structure boundaries".
2) run the conversion program RPUSTRCL_COSTS.
Regards -
Error "ERROR_PERIOD_VERSION" when loading DTP - Abap short dump
Hi,
I got this Error when loading with DTP. it occured in the transformation end routine.
I have this function module in my End routine. * REBW_FIRST_DAY_OF_PERIOD_GET*
Information on where terminated
Termination occurred in the ABAP program "SAPLREBW_UTIL" - in
"REBW_FIRST_DAY_OF_PERIOD_GET".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 41
of the (Include) program "LREBW_UTILU03".
Source Code Extract
Line SourceCde
11 *" REFERENCE(E_SPERIOD) TYPE XFELD
12 *" EXCEPTIONS
13 *" ERROR_PERIOD
14 *" ERROR_PERIOD_VERSION
15 *" FIRSTDAY_NOT_DEFINED
16 *" PERIOD_NOT_DEFINED
17 *"----
18 DATA:
19 DATUM(8),
20 TAG(2),
21 IMONAT TYPE I,
22 JAHR type rsfiscyear,
23 DATE type rscalday,
24 PERZAHL(4) TYPE N,
25 IRC(1) TYPE N,
26 ls_t009 like t009,
27 ls_t009y like t009y,
28 ls_t009b like t009b.
29
30 *
31 * Version der Periodenermittlung nachlesen
32 *
33 IF I_FISCVAR NE ls_T009-PERIV.
34 SELECT SINGLE * FROM T009
35 into ls_t009
36 WHERE PERIV = I_fiscvar.
37 IF SY-SUBRC NE 0.
38 *
39 * In Tabelle $ fehlt der Eintrag $
40 *
>>>>> RAISE ERROR_PERIOD_VERSION.
42 ENDIF.
43 ENDIF.
44 *
45 * Periode überprüfen
46 *
47 PERZAHL = ls_T009-ANZBP + ls_T009-ANZSP.
48 IF I_FISCPER < 1 OR I_FISCPER > PERZAHL.
49 *
does any knows how I can resolve it.
thankscheck table t009, it seems you have some entries missing (based on fiscal variant)
you can solve this, by going to the source system tree, right-click on your source system and choose transfer global settings.
you can transfer all settings now...
M. -
SAP Short Dumps and PCI Compliance
We've run into an issue with our PCI Compliance audit around being able to see unencrypted credit cards in short dump messages in SAP. Has anyone run into this issue?
Only work around I've got at this point is to restrict all access to short dumps and require many documented signoffs before turning on and off access to a short dump. This is pretty cumbersome, and still leaves a hole in my overall security.
We've managed to purge restricted CC data from our XI logging, and done everything right with encryption, but this short dump issue just doesn't seem to have a solution.
Can anyone help? We're on 6.0.
Thanks!Hi David,
This is an interesting situation you have described. ABAP short-dumps or run-time errors as they are also known as, are unhandled exceptions during program execution. The conditions that cause such exceptions is unknown or cannot be handled at run-time. To help analyze what went wrong with the said program during execution, it is necessary for the dump to contain all possible information including data values passed between programs when the error occurs. Encryption of restricted data values is a program step in itself. If the dump were to occur after this step then of course it would contain encrypted CC info. Unfortunately in your case it exposes restricted CC info because the dump occurs BEFORE this step.
I don't believe there is a way to prevent this from happening -- for the same reason that the program logic does not know at run-time how to "handle" the exception. If occurrences of such dumps is fairly common in your system, you may want to investigate the likely causes -- for example, missing or incorrect customization. Analyzing the short dumps will probably give you a clue. Your customization team may be able to identify a pre-condition that causes this unhandled exception. If this exception can then be handled (via a program change) that returns a meaningful error instead of a short dump you would be able to close the security hole. This however entails modification to SAP standard code. I don't usually recommend such changes, but given the sensitive nature of your data it may be worth consideration.
I personally advocate restricted access to ST22. The steps you have undertaken to enforce this may be cumbersome despite efforts to keep it simple. I suppose that's the price we pay in administering the system. If you have not already done so, you may also want to ensure that short-dumps that contain restricted CC info are not saved (using the "Keep" feature in ST22) for easy retrieval at a later point in time or they are saved, it be available only to 'restricted eyes'. Short-dumps are normally saved in the system for 7 or 14 days (not sure of exact # of days). The bigger challenge in my opinion is: How do you prevent the restricted info from being viewed by the user who during the course of program/transaction execution encounters the said short dump? No amount of security controls around ST22 will mitigate this risk. The only option that remains is program change (as mentioned above). But to get there you first need to know what causes the exception.
Regards.
Ashutosh -
Short Dump While creating a Value Driver Tree
Hi all,
I am trying to create a value driver tree in CPM. i am on SEM verion 3.1b. I am able to create the value driver tree but when i goto the graphical view it generates a ABAP short dump. does anybody have any idea on thishi srini,
Elaborate it clearly .
Regards ,
Muneeh Gitta. -
Short dump with TPM_TRD1 000
hi everyone,
when I run the Tcode:TBB1,i come across a ABAP short dump error.
my system environment is:
PC
windows2003NT
oracle10.2
independant system without SLD control
The error info as follow:
Note 837202 - TPM_MIGRATION:tpm18: Short dump with TPM_TRD1 000
Summary
Symptom
You migrate from Release CFM or Enterprise 1.10 to ERP 2.0 or higher. There are already parallel valuation areas in use. In tpm_migration_cat, you specify a key date. In the test system, the following short dump occurs for the parallel valuation areas:
Error message short text:
Internal error: SLD
Message class: "TPM_TRD1"
Number: 000
Variable 1: "SLD"
Other terms
CL_DISTRIBUTOR_SLD, TPM_TRD1000
Solution
In the production system, you have to carry out tpm18 before the technical upgrade for all business transactions that are before the key date from tpm_migration_cat.
I do not understand how to do with the soluton
eg.what is "tpm18"?
Do need your helps,
Thank you very much
PeterHi Peter,
I guess you found note 837202 when you were looking for a solution for the TBB1 dump you encountered.
This note deals with a special situation when executing tpm18 (which is the transaction for fixing and posting derived flows) in a test system after migration and it tells you you should run tpm18 in production before the technical upgrade.
I am not sure if this really applies to your situation, maybe you should rather check if note 821854 and the solution therein can be helpful.
But without more information (e.g. knowing more about your release, your 'migration history' and the part of the coding where the dump is raised), it is quite difficult to give a diagnosis.
Maybe you should think of sending a customer message to SAP support via the SAP marketplace if you cannot get rid of this problem on your own.
Maybe you are looking for
-
Null value in detail table's primary key
I use Business Components Data Form to define a master-detail java panel. I don't display the primary key column in the detail grid control. Then I click on "+" to add a row, enter a value (the 2nd part of the detail table's primary key) and click co
-
How do I transfer RAW+jpg to cloud storage under iOS 8?
I want to transfer Canon RAW+jpg CR2 files, imported from the camera via the camera connection kit, from my iPad to cloud storage in Dropbox. Prior to iOS 8, I could accomplish this by exporting from the photography workflow app PhotosInfoPro. That f
-
Invalid results with SDO_RELATE
I am getting what appears to be invalid results when using the ANYINTERACT mask for the SDO_RELATE operator on our 8.1.7 system. The following query counts 85 linear geometries interacting with the "DC" polygon while the same spatial selection in ESR
-
Problem with viewing videos using spacebar quicklook preview in Lion
I've always thought it was great to be able to preview videos quickly by just pressing the spacebar and have been on my Macbook running Snow Leopard for months. I recently bought a new iMac running Lion however but it seems there are some issues with
-
Pages has extremely delayed typing, how do I fix this?
Lately when I use Pages, I have to sit and wait on the text to catch up with my cursor. All other computer programs I have on my Mac do not have this problem and run just fine when I am typing. My Pages program is up to date and has been fine in th