Cp6 - scorm and question pools?

I have a particular activity that was formerly built in cp5.5 (non-scorm) which I've now republished in Cp6 and uploaded to our LMS.
This particular lesson has 32 questions which pull from 5 question pools.  The filmstrip shows 41 slides.
I set the "Success/Completion Criteria" to 'slide views' and 90%.  However, once complete the LMS is not recognizing the lesson as complete and continues to show 0% completion.
I have a different lesson without question pools that does show completion, and the slide view % is the same.  I can't find a difference between them other than the question pools.
Does the Success/Completion Criteria look at the question pool slides as part of the total, or does it only count the slides the learner might see?
thanks.

you have to design undebuggable version...

Similar Messages

  • Export a Captivate question pool

    Is there a way to export a Captivate question pool in an xml format, perhaps make a GIFT file or QTI format?

    Even if you could export them, you could not edit them. In
    other words, Adobe Captivate does not have a way to import
    questions that are not written in Captivate (you can't just type
    them in Word for example). In Captivate 4 you can make questons and
    question pools and import them, but the author needs to do that in
    Captivate 4
    One solution is to have Captivate 4 for each developer and
    that would simplify your work.
    Another solution woul be to design a Word DOC file that has a
    picture of the Question Style and then a place to type the Question
    and Answers for that style. The Captivate developer could then copy
    and paste the text into the question slides. If you run dual
    monitors, this is easy to do and it goes quickly.
    Joe C.

  • Quiz slide not advance when using question pools and advance answer options?

    Hi,
    I am using CP 5.5. I created a small test where I have just 2 question in a question pool.  The questions are using the advanced answer options to show some specific feedback. When I insert the questions in to the project using a random question slide, after the user answers where you should be able to press Y or click to move on, I click, but nothing happens.  You can't get off the quiz slide.  The quiz slides work fine when they are inserted in the project as reqular quiz slides, but not when they are being pulled from a question pool.
    Is this a known bug? Is there a workaround? Anyone else run in to this?
    Thanks!
      Lori

    I was having the same problem on the last Random Question slide (total 10 RQ slides), and was able to fix it by following the next steps:
    Make sure Quiz: Pass or Fail actions are set to Continue for both Passing and Failing actions in the quiz preferences.
    Delete the RQ slide not advancing, then duplicate one of the RQ slides working, and assign your question pool to the new slide if different from the original duplicate. This step will make sure you are using a good working RQ slide.
    For some reason, my last RQ slide was corrupted and wasn't advancing to the Score slide at the end of the quiz.
    I can finally finish this project.
    Good luck.

  • Lync 2013 Enterprise load balancing on the front end and edge pool

    Hi,
    I am setting up a Lync 2013 Enterprise deployment consisting of a Front End pool (x2 FE servers) and an Edge pool (x2 Edge servers).  I'm seeing some conflicting advice regarding load balancing using hardware or DNS for the front end and the edge.
    On the front end I have 2 internal DNS records 'lyncfepool1.contoso.local' each of which map to one of the IPs of the FE servers.  I've used my details to populate the Detailed Design Planner excel spreadsheet and am told that I require a HLB to load
    balance my front end pool.  I'm aware of the need to load balance HTTPS traffic internally (which will be done by TMG) however other traffic to the front end (SIP, etc) can be balanced by DNS only, and not require a HLB?
    Can someone clarify the front end requirement?
    Also - looking now at the edge pool - this site again have two edge servers in a pool.  We are using a total of six private IP addresses, two per edge service (2 x av.contoso.com, 2 x sip.contoso.com and 2 x webcon.contoso.com).  These will be
    NAT'ed by the external firewall and directed to the respective external (DMZ) IP addresses on the Edge servers on port 443.  I know this isn't true roundrobin due to the intelligence of the Lync client when connecting (in that the Lync client will connect
    to one of the public IPs and if it can't connect, it will know to connect to the other service IP), however I want to clarify this set up, particularly the need to direct the external public IP traffic at the DMZ Edge IP specified in the topology builder.
    I've attached a basic diagram of the external/DMZ/Edge side which hopefully helps with this question
    Persevere, Persevere, Per..

    That is because you will always need HLB for a front-end server since it hosts the Lync webservices which use HTTP/HTTPS traffic.
    The description on the calculation tool also describes this correctly:
    Supports Standard and Enterprise pools (up to 12 nodes), with pure device-based load balancing or a combination of DNS load balancing and device-based load balancing (for
    Lync web services)
    You can use either Hardware or DNS loadbalancing for SIP traffic only, but you will always need a HLB for the webservices.  Both are applicable for the Front-End so you have either
    full HLB for both SIP and HTTP(S) traffic
    DNS LB for SIP traffic and HLB for HTTP(S) traffic
    Hope this is more clear :-)
    Lync Server MVP | MCITP Lync Server 2010 | If you think my post is the answer to your question, please mark it as answer so future visitors can easily find it.

  • How can I get Captivate to score across multiple question pools?

    I have set up a Captivate assessment as follows:
    A core set of 50 questions will be presented to all learners
    Depending on where the learner is, he will receive an additional 10 questions from one of 5 location-specific pools
    Learners will see a total of 60 questions
    I have my question pools set up and branching correctly, and am using the Branch Aware option to assist with this and the progress indicator. Before the first question I have the learner click one of several buttons (not quiz elements) to set a location variable, and after presenting the core questions I use this variable to determine which random question slide to jump to next (with set of slides pointing to a different question pool). After asking the 10 random questions from that pool the learner is then redirected to the review slide so only one set of location-specific slides is encoutnered on each attempt.
    All of that seems to be working as designed but the scoring is not behaving as I had expected; despite the fact that all questions are asked before the review slide is presented (i.e. all questions are within the quiz scope in both the edit-time and run-time sense) the review slide only reports results from the first question pool. For example, in a test file I reduced the question slides for the first pool to only display 2 questions, for a total of 12 presented, but my results show "0 of 2 correct" or "2 of 2 correct." The pass/fail results of the module match the review slide, so this is not a simple display issue; if I miss either of the two questions from the first pool I fail regardless of what happens in the second pool.
    What am I missing? Surely there wouldn't be the option of using multiple question pools if only one could be graded ...
    I am working on Captivate 6.0.1 64-bit for Windows. FWIW the file was originally created in Captivate 5 and has since been upconverted, but the additional question pools weren't introduced until after the conversion processes so I wouldn't expect this to be related to residual crud left over from that process.

    Thanks for the quick response ...
    I had already tried deleting the review slide itself, though Captivate wouldn't let me - it just hid it. I tried again using the method you recommended but the slide remained in the filmstrip, so I tried deleting again, then re-added it from the Quiz Settings page ... no joy, same behavior as before.
    I checked the Advanced Interaction page and confirmed that all of the scored questions were configuredthe same way as the non-scored questions, with the only difference being the pool that they were drawing from.
    Other thoughts? I am by no means a Captivate expert but this one really feels like it shouldn't be this hard, and I'm more than a little afraid that it's the file itself that's jacked up ...

  • How to make a question pool with MANY questions?

    I would like to make a question pool
    with several thousand questions, which I currently have in an
    Excel file. Is there a way around having manually to enter all
    questions in a Captivate question pool?
    Thanks.

    I would use the XML function from Captivate 4.
    - Make yourself a test quiz with two slides, one being a multiple choice.
    - Export it to XML
    - Open the XML File in Excel
    Good point to start with is ns1:g and ns1:Source26.
    Most likely you can get all your question into captivate that way.
    Mr_TD

  • Resolution of question pools

    I have created a pool of question from which I want to add
    random questions to a few different presentations but when I import
    the question pool and then add a random slide to the project the
    question is cut off by the size of the project. I think I was in a
    project that was 1024x768 when I created the questions but when I
    add the questions to a project that is 640x480 the question get cut
    off. I just thought the text would wrap and the answers would just
    move down but this is not happening.
    If anyone has any suggestions how I can get round this
    without having to enter in all the questions again

    Welcome to our community, IDWT
    Have you tried opening just one of the questions for editing
    in the smaller project?
    Sometimes that is all that is needed with some applications.
    You may find that the elements pop into the viewable area if you do
    that.
    Then again, it may make no difference whatsoever. Nothing
    should be lost by trying to see.
    Cheers... Rick

  • Cp4 - question pool - time limit not working

    I am putting together a bunch of quiz modules & I am having so many problems with this, it's driving me crazy!
    I am using question pools & I have a bunch of questions in my pool.  I am trying to edit the questions to place a time limit on each one.  When I edit the question, I choose the Options tab & select Show time out message. I then choose the Reporting tab & enter a time limit of two minutes.  Yes, the Time limit selection box is checked.
    Now, when I look at my question slide - there is no time out message & when I publish my module... the question has no time limit!
    The crazy thing is that I have been putting these modules together all day & this is the first one that is acting this way!  I have successfully added time limits to other quiz modules.
    One thing I tried.. was to save the problem captivate file & then re-open... but when I look at each question's properties - they all have the time limit defined.  So it is saving the info, it's just not implementing it.
    I'm running into all kinds of crazy problems with my question pools... (among other things, the question pools manager won't save any of my edits to the questions!)
    any advice?
    thx in advance...

    Yes, I have a few threads going... I'm having a lot of problems!
    The other thread that Rod is helping me with is related to a different issue.... although it's still quiz-related.
    Here is a quick outline of what I'm doing here.  I have a small file that I'm using as a template.  It has 44 slides in it - 2 intro slides, 40 random quiz slides, and 2 ending slides.  I have a question pool defined that has one question slide in it - I'm just using this a placeholder for now.
    So, what I'm doing is using the template file as a starting point.  I then copy/paste question slides from other captivate files into my question pool.  I am creating a master quiz based on previous quizzes.  So there are anywhere from 9-12 captivate files that I'm taking questions from and copying into my new question pool-based quiz file.  This is where things are going wacky.  The problems I'm running into are really unpredictable.
    I'm thinking maybe the files that I'm taking the questions FROM might be corrupted in some way? Although, in the original files, the questions do NOT have a time limit.  This is something new I am adding after I bring them into my question pool.
    I will do what you suggest... if you have any other ideas, I would surely welcome those as well!!
    Thanks Lilybiri...

  • Captivate 4 Question Pool Slides Show Ghosts

    Random question slides display captions from previous slides
    when I publish to Flash 8-10. Publishing to Flash 7 or using the
    same questions (but not as random questions) cures the problem.
    The captions appear on all but one random question slide (8
    of 10 doesn't display the problem). The captions are from four
    upstream slides each of which has different rollover captions. The
    problematic question slides show all the rollover captions,
    superimposed over the question.
    The PC showing the problem is running Win XP SP3, Flash WIN
    10,0,22,87. Other PC's at the same site do have the problem when
    running the same published show.
    I've tried recreating the question pool from the original
    question slides, recreating the random question slides,
    uninstalling and reinstalling Flash on the target PC with the same
    results.
    Any one else noticed this?
    Any suggestions for a fix other than publishing in Flash 7?

    Did you or others submit an official bug report?
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Transition for Question Pool Slides

    Captivate v5.5
    I have a question pool of 20 slides with 5 random slides in the main project.
    I have applied "Blinds" as a transition option to all 20 slides in the question pool.
    When I test the questions (F8 starting on the slide before the first random question slide), the transitions do not work.
    Any idea?
    Noel

    Hi Rod,
    I previewed the whole project (F4) and still the transition did not work.
    Having to publish it (eg to .exe I presume you mean) before I can check the slide transition seems a little long winded - but I will give it a go just in case.
    Thanks...
    Noel

  • Convert to Question Pool random questions?

    We are updating a course we developed last year (prior to
    Captivate 3). This year we want to apply Captivate 3's "Question
    Pool random questions" to this course. Is there a way to create the
    question pool(s) in this existing quiz, and then add last year's
    questions to them without having to re-enter each question into the
    Question Pool Manager?
    Thank you for any tips!

    Hi Jan
    Sure thing. Just convert the version 1 or 2 project to a
    version 3 project. Then define a Question Pool. Once you have done
    that, switch to Storyboard view. Select the question slides you
    wish to add to the pool and right-click. You should be presented
    with an option to add the selected slides to the pool.
    Once you have moved the question slides to a pool, you would
    then insert Random slides that point to the pool.
    Cheers... Rick

  • Questions are not randomizing in question pool

    I have 30 questions in my question pool.  I have 10 random question slides but everytime I go to quiz, the same 10 questions come up.   I need help in troubleshooting this, please.

    Once you launch a module and it sets up the specific questions that will be selected from the pool for that session, those are the only 10 questions you are going to see, no matter how many times you hit the Retake Quiz button.  That is normal behaviour.
    However, if you close down the module entirely and relaunch again at a later time, in theory you should stand a chance of seeing at least some different quiz questions.  If you are consistently seeing EXACTLY THE SAME set of 10 quiz questions even after completely closing down and relaunching the session again, then that would be regarded as a randomization failure and you should report the bug to Adobe.

  • Results slide showing all question pool results not just the ones completed.

    I have several question pools which have the option to be taken independently or separately.
    If the user does not take all seven of the modules then the quiz results slide at the end is incorrect as it will report all of the questions not just the ones attempted.
    I have tried the Branch aware option in the quiz results option but that did not worth.
    It this an easy fix or does it require me to add a variable count for each correct answer.
    Many thanks
    Rick

    Branch aware should be just fine for that case, why do you tell it is not working? Branch Aware Quiz - Captivate blog
    When you say 'score slide is not reporting correctly', I had no such problems.
    You could create a custom score slide indeed, using variables, but what if you have to report as a SCORM? Only possibility in that case is Branch aware.

  • OES11 SP2 - Linux File System and NSS Pools & Volumes

    Planning to install our first OES11 SP2 server into an existing tree - the
    idea is to run this new OES11 server virtualized on VMware ESXi 5.5
    The existing tree has two physical NW6.5SP8 servers running eDirectory
    Version 8.7.3.10b (NDS Version 10554.64). One of the existing Netware
    servers is used for DHCP/DNS, File Sharing from three NSS volumes and
    Groupwise 7.0.4 whilst the second server is used for FTP services and
    eDirectory redundancy. Ultimately the plan is to have two virtualized OES11
    SP2 server with one for file sharing and the other for making the move from
    GW7 to GW2012. And we're planning to stick with NSS for file sharing on the
    new OES11 SP2 server.
    I've come across a couple of posts for earlier versions of OES which
    recommended not to put the Linux Native OS File System and NSS storage
    pools/volumes on the same hard drive. Apparently the advice was a result of
    needing to allow EVMS to manage the drive which could be problemmatic.
    I've read the OES11 documentation which says that "The Enterprise Volume
    Management System (EVMS) has been deprecated in SLES 11, and is also
    deprecated in OES 11. Novell Linux Volume Manager (NLVM) replaces EVMS for
    managing NetWare partitions under Novell Storage Services (NSS) pools."
    So I'm wondering if there is still a compelling requirement to keep the
    Linux Native File System and NSS pools/volumes on separate hard drives or
    can they both now safely co-exist on the same drive without causing
    headaches or gotchas for the future?
    Neil

    Hi Willem,
    Many thanks for the further reply.
    So we can just use the VMWare setup to "split" the one physical drive into
    two virtual drives (one for the OS and the second for the pools).
    And I've seen posts in other forums about the need for a decent battery
    backed cache module for the P410i controller so I'll make sure we get one
    (probably 512Mb module + battery).
    Can I ask what is the advantage of configuring each VM's virtual disk to run
    on it's own virtual SCSI adapter (by setting disk1 to scsi 0:0, disk2 to
    scsi 1:0, and so on)?
    Cheers,
    Neil
    >>> On 9/5/14 at 12:56, in message
    <[email protected]>,
    magic31<[email protected]> wrote:
    > HI Niel,
    >
    > xyzl;2318555 Wrote: >
    >> The new installation will run on a Proliant ML350 G6 with P410i>
    > controller
    >> so we can use the raid capability to create two different logical drives>
    > as
    >> suggested.
    >
    > As you will be using ESXi 5.5 as host OS, it's not needed to split
    > thehost server storage into two logical drives... unless that's what
    > youwant in perspective for "general performance" or redundancy reasons.
    > Italso depends on the options that P410i controller has.
    >
    > On a side note, I'm not too familiar with the P410i controller... domake
    > sure you have a decent battery backed cache module installed, asthat will
    > greatly help with the disk performance bit.
    > If the controller can handle it and the controller can handle it, go
    > forraid 10 or raid 50. That might be too big a space penalty but will
    > helpwith disk performance.
    >
    > Once you have your VMware server up and running, you can configure
    > thetwo VM's with each two or more drives attached (on for the OS,
    > thesecond or others for your pools).
    > I usually create a virtual disk per pool+volume set (e.g. DATAPOOL
    > &DATAVOLUME on one vm virtual disk, USERPOOL & USER volume on an other
    > vmvirtual disk).
    > With VMware you can than also configure each VM's virtual disk to run
    > onit's own virtual SCSI adapter (bij setting disk1 to scsi 0:0, disk2
    > toscsi 1:0, and so on).
    >
    >
    > xyzl;2318555 Wrote: > Do you have any suggestions for the disk space that
    > should be reserved> or
    >> used for the Linux Native OS File System (/boot, /swap and LVM)?
    >>
    >
    > Here's one thread that might be of interest (there are more
    > throughoutthe SLES/OES
    >
    forums):https://forums.novell.com/showthread...rtitioning-%28
    > moving-from-NW%29
    >
    > I still contently follow the method I choose for back in 2008, justwith
    > a little bigger sizing which now is:
    >
    > On a virtual disk sized 39GB:
    >
    > primary partition 1: 500 MB /boot , fs type ext2
    > primary partition 2: 12GB / (root), fs type ext3
    > primary partition 3: 3 GB swap , type swap
    >
    > primary partition 4: LVM VG-SYSTEM (LVM partition type 8E), takes up
    > therest of the disk **
    > LVM volume (lv_var): 12 GB /var , fs type ext3
    > LVM volume (lv_usr-install): 7GB /usr/install, fs type ext3
    > * there's still a little space left in the LVM VG, in case var needs
    > toquickly be enlarged
    >
    > One thing that's different in here vs what I used to do: I replaced
    > the/tmp mountpoint with /usr/install
    >
    > In /usr/install, I place all relevant install files/IOS's
    > andinstallation specifics (text files) for the server in question. Keeps
    > itall in one neat place imo.
    >
    > Cheers,
    > Willem-- Knowledge Partner (voluntary sysop)
    > ---
    > If you find a post helpful and are logged into the web interface,
    > please show your appreciation and click on the star below it.
    >
    Thanks!---------------------------------------------------------------------
    ---magi
    > c31's Profile: https://forums.novell.com/member.php?userid=2303View this
    > thread: https://forums.novell.com/showthread.php?t=476852

  • Data source for application using both pooled and non pooled connections

    Hi guys.
    I am integrating Oracle's connection pooling into an existing application that had formerly used dbConnectionBroker. It looks like this task should be quite straightforward. However, for consistency, I would also like to replace other Connection logic within the application to use Oracle classes. This will involve using OracleDataSource to obtain a Connection object. ( without pooling ).
    So in this case, the application will use both pooled and non pooled Oracle connections. They will be connecting to the same database. The question I have is in regard to the use of data-sources.xml.
    Are there any special considerations for the required attribute values within data-sources.xml under this scenario ?
    Help will be greatly appreciated.
    Regards.
    Steve.

    Hi Steve -
    It should be feasible for you to define a single datasource using multiple location entries to indicate what sort of pooling behaviour you wish to use.
    If you lookup and use the "location" attribute, you will receive a javax.sql.DataSource object which will not provide connection pooling.
    If you lookup and use the "ejb-location" attribute you will receive a DataSource object that will support connection pooling operations.
    Note that this is using the emulated datasource approach, and transaction support is limited to a single resource (one database) for these datasources - you won't get 2PC support for transactions.
    If you need a transaction to span two separate resources (ie two databases in same tx) then you will need to use the non-emulated datasource approach.
    There is a chapter in the J2EE Services Guide which describes the datasource model we have with OC4J. This might provide you with some more useful information. See Chapter 11 - http://otn.oracle.com/docs/products/ias/doc_library/903doc_otn/generic.903/a97690/ds3.htm#1004903
    cheers
    -steve-

Maybe you are looking for

  • CJ88 Posting in G/L account

    Hi All,     Query: When we execute CJ88 using WBS element, the Posting is happening into 1(One) G/L account, one SAP Standard FM is returning the G/L account number.    Problem: as per WBS element ID and PSPID(Project ID), the requirement is to posti

  • SQL Questions (New to Cisco)

    Hello. I work for Clarian Health in Indianapolis and am trying to learn as much as possible about the SQL databases, both AWDB and HDS so that I can handle the reporting for our Revenue Cycle Customer Service. I am currently working my way through th

  • ALV Download to Excel

    Hi Experts, Currently in my custom program I have an issue regarding downloading ALV to excel file where one of the fields in the report will output more than 400 characters which is in Chinese characters and this field already type to string. The pr

  • Function Module to determine the number of pages in a pdf file

    Hi All, Is there any standard function module to determine the number of pages in a pdf file? Thanks, Sai

  • Copy to the disk iTunes -4 unknown error

    On my iPad mini I keep getting this error when I try to sync: attempting to copy to the disk itunes failed -4 unknown error occurred