CProject, task based costing, strat. 10, plan price for the role in ctr acc
Hello all.
According to the costing logic described in R/3 library the following strategies are available for costs when using task based controlling.
Costs for task
4. Different costs which you entered for the task
5. Costs per activity unit for the task in Customizing
Costs for roles
8. Different costs which you entered for the project role
9. Costs per activity unit for the role in Customizing
10. Plan price for the role in cost center accounting
Do anyone have experience with using strategy 10? If so, please elaborate.
Thanks for your help / Anders
Hi Sejo,
Thanks for your reply, Standalone cProjects works, but obviuosly it has to be integrated with ECC and configuration related to accounting in ERP has to be done.
Scenario is that I have created a Project and before transferring it to ECC(creation of internal order) I should be able to calculate the cost from cProjects, as these are just rough cost based on cost/revenue rate.Later when I calculate cost using internal order from ECC it should overwite.
Additionally as per the link I have already done the required configuration.
1. Activate Integration
2. Define Object Links for Accounting Integration
Default entry: 0FIN_INT_SOC_R3
defined RFC destination . Is webserver to be defined - required ?
3. Make General Settings
4. Define Cost/Revenue Rates
Cost revenue rates are defined here.
I havent maintained Organisation unit as it takes default 'zero'.
5. Replicate Cost/Revenue Rates
To replicate cost revenue rates from Cprojects to ERP.
6. Replicate Accounting-Relevant Characteristics
7. Make Settings in ERP System
Make settings in ERP system related to controlling
Create and Change Controlling Scenario
Define Controlling Scenario
Settings for Easy Cost Planning
Assign Cost Elements and Activity Types > Activity type must be open for period and must have proper cost element. (can be maintained in tcode: KP26).
Then also for Task based costing is not calculating and for role based it is showing Negative.
Please guide me where it is going wrong.Is it related to Organisational Mapping?
Regards,
Nitin Ghadge
Similar Messages
-
Material Ledger - release actual price as the standard price for the next-
Hi Gurus, Sap Library /documentation about Material Ledger says:
"At the end of the period, an actual price is calculated for each material based on the actual costs of the period. This actual price is called the periodic unit price and can be used to revaluate the inventory for the period to be closed. In addition, you can use this actual price as the standard price for the next period."
How Can I do that? i've calculated the new actual price but i could release it as a new standar costo.
Kind Regards
AndréHi Both,
I think there is something else to add to this, the new PUP price can only be applicable in the period N+2 where N=Period of closing. This is something that is not specifically mentions in SAP documents.(not that I know of ) but I found it the hard way!
Cheers -
If I purchase one song from an albumn in iTunes, but later want to purchase the entire albumn, does iTunes give credit for the single song purchased, or will I be charged once for the single song, and then the regular full price for the albumn?
Welcome to the Apple Support Communities
You'll purchase the rest of the album, so you'll pay the same as the cost of the album but without the cost of the previously purchased song -
I got logic pro and i was wondering if possible paying a little less for an upgrade!! or do i have to pay the full price for the pro x?!!!
Or if apple would work around this some way or another?If you bought Logic 9 less than a month ago then Apple will most likely refund you so that you can buy Logic X instead.
The full (only) price of Logic X is as staed on the App Store. This price (whether people agree or disagree, like it or not like it) is still less than any upgrade price for any other DAW.
A lot of people here are saying they bought Logic 9 6 months or a year ago and want a cheaper price. For me, I started on Logic 5.5. Logic 6, you could pay an upgrade price that was way over what the full app is now but you had to add costs as things like Space Designer were extra. Their serial numbers, once purchased, got added to you XS Key, which was a dongle that never got hacked in 6 and a half years.
Apple, on acquiring Emagic, dropped the price from $1000 to $499, included all the things you had to pay extra for then dropped the price to what it is now once they went over to the App Store. They also dropped the un-cracked dongle.
So myself and a lot of other people here went 5.5 to 6 (added the goodies that were extra) to 7 to 8 and to 9. When there was an upgrade price, the price was around what the app is now.
I'm amazed at how many people see this as a full price and want money off whereas in reality a complete piece of softwaser is being offered for an upgrade price.
My first paragraph will answer your question and you probably won't care about the rest of the post. $199 or £139 IS an upgrade price. -
Several plan orders for the same day
Hi SAP Experts,
In my company we have a requirement to produce the same finish material in two work centers, using different BOMs. This was achieved through production versions for production orders. Now we need to plan (Indipendent requirement & Plan orders )the material based on these two BOMs.
We enter the indipendent requirement in MD61. I have given the production version against the requirement (In schedule lines tab). However i am unable to give two different requirements for the same day in different production versions.
Then i tried using different planning versions and assigning the different production versions to different plan versions.
Although my indipendent requirements are taken in different production versions(As I can see in MD04). When i run MRP plan orders are raised as the total of the requirements and in only one production version.
Please, Can some one help me to find a method to raise different plan orders for the same day in different production versions???
regards,
MadhushikaDear All,
I tried quota arrangements as a solution for above mentioned problem. What i require is to devide the PIR for a particular day in to two equal parts in two different production versions so that two plan orders will raise in equal quantities for the same day in two different production versions.
With quota arrangement what i get is alternative plan oders in different versions in diffrent days.
For example If my PIR are
Day 1 = 1000
Day 2 = 1500
Day 3 = 500
Day 4 = 1000
what i get is
Day 1 = 1000 - prd ver1
Day 2 = 1500 - prd ver2
Day 3 = 500 - prd ver1
Day 4 = 1000 - prd ver2
What i want is
Day 1 = 500 -prd ver1
Day 1 = 500 -prd ver2
Day 2 = 750 -prd ver1
Day 2 = 750 -prd ver2
Day 3 = 250 -prd ver1
Day 3 = 250 -prd ver2
Day 4 = 500 -prd ver1
Day 4 = 500 -prd ver2
Hope its clear to you all.
Please advise me how to configure the system according to this reqirement.
Best regards,
Madhushika -
Does SAP have function to allow the prices for the activities type to copy
Hi Expert,
Would like to seek for your help refer to above subject.
Does SAP have function to allow the prices for the activities type to copy from previuos fiscal year to current fiscal year so that we do not need to manually set up the acitvities types prices via KP26.
What are the T-code and what are the configuration need to be set in order to use the function.
Please help.
Regards,
KHHi,
Thank you for the prompt reply.
However, would like to seek for your advise does SAP provide standard report to view the cost of activities incur?What are the T-code?
Thank you.
Regards,
Karen -
Enter the price for the service item
Dear Experts,
We are implementing SRM 7.0 and we have upgraded our system with Service pack 7.Created a limit SC and approved at all levels. After approving SC system created PO in SRM but did not replicate to backend ECC system. When I looked PO in edit PO mode and system throws an error message "Enter the price for the service item".
Have any body faced this issue? If yes please guide me how to fix this issue or Suggest me any useful link or OSS messages.
Thanks in advance.
Thanks
UmakanthHello,
I assume you are using a Product category configured for Extended Classic scenario.
In this case a limit item in SC creates limit item in PO(in SRM). But when this PO is replicated to R/3, it always creates item with type 'D' for limit item in PO.
Now with respect to error message you get, can you check if you have specified all LImits (Overall value, Expected value etc)?
You can also try creating a PO directly in SRM with limit item (use same Product category as above) and see if it replicates.
If you get the same error, please raise a OSS message for SAP.
Thanks,
Sushil -
Help needed on balance sheet plan report for the current year
Hi BW gurus,
I have a problem with reporting.
I need to get Balance-Sheet Plan Reports for the Planned year and for the current year.
To get the report for the planned year its straight forward just by restricting 0balance by the version to 1 and the valuetype 20.
But I have a problem with the current year report.
I have fiscal year and the company code as the variables.
The report should be like this.
If we need the report as of today(July 26 2006),we may input 2006 for the fiscal year variable.
And the 0balance for the twelve fiscal periods should be as follows
From jan 2006 to june 2006(fiscal periods) it should have only the actuals
From july 2006 to dec 2006(fiscal periods) it should have only the plan
I have already built a query by having two restricted keyfigures on 0balance.
One by restricting version and valuetype 0 and 10 , and the other with 1 and 20.
But in the report I am getting two columns of data for each fiscal period for 12 periods.0balance with actuals and 0balance with plan.
But I need to get 0balance with actuals from jan to june(individually for each fiscal period columnwise),and 0balance with plan from july to dec(individually for each fiscal period columnwise).
Hope you people can visualize my report.
Please help me ASAP.
Any kind of help is appreciated.
My mail id is [email protected]
Thanks in advance
Regards
Sam MathewHi Sam,
Did u get this issue solved. I am having the same issue now. Can u please let me know if u have a solution for this.
Thanks
Prasad -
BAPI_PO_CHANGE to update the Price for the line item not updating the Price
Hi,
I am using BAPI_PO_CHANGE to update the Price for the line item. This BAPI is not updating the Price. I am using external cummit also, but the BAPI is not updating price.
I am passing following data to the BAPI.
Plant: CQ11
PO Material Price
4500002142 TEST_BATCH 12
Please provide suggestion.
Regards,
Jubin.Hi,
check this link...this has sample code
[http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm]
Regards,
Surinder -
How do we create user defined Task in OM & Which report we run for the Task
Hi
How do we create user defined Task in OM & Which report we run for the Task.
Regards
RajeshYou can create tasks using PFCT or path: Human resources> Organizational management> Expert mode> Task catalog in Easy access.
Check this link may be useful for you: http://help.sap.com/saphelp_40b/helpdata/pt/fb/135d89457311d189440000e829fbbd/content.htm -
Material has more than one plant, only show the price for the first on
Hi:
I am having the standard price for the material with the different plants ,I am seeing only one Material and Standard price(if a material has more than one plant, only show the price for the first one In the report ):
plant :de87 Material: 60020601 Standard price: 1237.00
plant:PT01 Material :60020601 Standard price: 634.00
In the report I am seeing DE87 with the standard price :1237.00 .
I am extracting from the 0MATERIAL_ATTR
Please help me how can I display all plants with the material and std price. In my data source there is no PLANT
rgrds
KumarHi:
Report is running on 0MATERIAL(Transactional master data),Data sourc: 0MATERIAL_ATTR,
We are having the standard price in the 0MATERIAL ,(Standard price is combination of plant and Material) .Plant is not available in the material,so in the report its displaying only first result
plant :de87 Material: 60020601 Standard price: 1237.00 --->Displaying this
plant:PT01 Material :60020601 Standard price: 634.00
In the above we are having the same material but different plant and different standard price. so I need to display the both in the report.
Rgrds
kumar -
Where to Configure the Price for the UoM Conversion
Hi All,
I have a requirment from my client here that he wants to change the UoM of the material at the billin document level. The UoM can be changed but I realized once it is changed the price has gone all wrong. Where can I configure the price for the UoM conversion because I cannot find it anywhere in SD itself.
Appreciate all of your inputs.
Thanks a lot!Hi Prashant,
I am trying to maintain the same material with different UoM but when I do so it says that the current condition is being processed at the current session. I guessed it meant that the conditiont record for that material type already exists?
How do I rectify this problem because when I enter the new line of material with the new UoM disappears.
Appreciate your input in this,
Thanks a lot!
Edited by: Yvonne Lee Sook Fun on Jun 16, 2009 4:32 AM -
Error msg: ZFI999:Maintain price for the material 254600254 in plant 1000
Hi gurus
18.02.2009 i created one STO PO. but material price in the accounting view the price was "Zero" in plant 1000. In plant 2000 the price has already maintained.
But today i updated the material price like Rs 200/- through MR21 for plant 1000.
After that while i transport the material through MB1B (351 mvt type) plant 1000 to 2000, i got the following error msg.
"ZFI999:Maintain price for the material 254600254 in plant 1000".
Regards
AmsiHi Amsi
the message no is not standard i think there has been a new message created. please check with your ABAPer about the message.
just want some clarification. you are doing STO from plant 1000 to 2000. the price should be picked for that material maintained in plant 2000.
in case of queries please revert back
Adwait Bachuwar -
Create Planning Application for the first time without using workspace
hi,all:
I come across a problem:The Hyperion Planning Application isn't configured into the workspace,but i have to create a Hyperion Planning Application for the first time.So, have any other methods to solve this problem? Can I use other tools or something to create it?
thanks very muchyellow wrote:
Hi,John,Thanks for your quick reply.
I think after install Hyperion Planning,at first time can't create application in this address:http://localhost:8300/HyperionPlanning/ ,usually create it in workspace.
Is the address you said different from http://localhost:8300/HyperionPlanning/?
thanksI gave you the address to create a planning application directly - http://localhost:8300/HyperionPlanning/AppWizard.jsp
Notice the AppWizard.jsp on the end.
If it version 11 you will be able to create your datasource from that location, if it is version 9 then you will have to create a datasource first from the configuration utility.
Cheers
John
http://john-goodwin.blogspot.com/ -
Why do I get a different movie price for the same movie on my iPad and iPhone. And 1 device says I can rent it but the other doesn't ,.?
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
Maybe you are looking for
-
I want to transfer pictures and music from my iphone 4S to a 5c. My pictures are not stored on icloud. Also, I would like to keep my apps and settings. Is all of this possible?
-
Do we install PT8.5 on existing release of PT for an upgrade?
Hi All, This is our first upgrade experience and we are a bit confused with the steps we should follow to upgrade PT. We are on 8.47 and planning to upgrade to 8.50. After reading the installation notes and other material, there is a bit of confusion
-
I have a question about developing code that can communicate to a port and therefore someting in the outside world. I see tutorials for doing this for various things but I don't understand how they know what to assign for different "packets" that the
-
I was trying to update my iphone4 and it froze on a screen telling me to plug it into itunes
i was trying to update my iphone4 and it froze on a screen telling me to plug it into itunes
-
ACE Configuration Synchronization failure
I have defined the FT group on ACE, but i don't see configuration getting update on the other module. The response for 'sh ft peer detail' is as follows Peer Id : 1 State : FSM_PEER_STATE_DOWN Maintenance mode : MAINT_MODE_OFF FT Vlan : 200 My IP Add