Crack'N'pop problem Solved (at least on my syst

Just got my new system, which came with a X-fi extreme gamer. Had the standard crack'n'pop issues, and came to this forum. I was able to get it resolved temporerily by selecting bit matched playback, which wasn't an acceptable solution.
I now?have a permenant fix, it was completely by accident I discoved this, but the card now works perfectly. I hope this helps in tracking down the problem, and that it fixes it for other people too.
After I installed my guitar recording interface drivers the problem just went away. The interface I use is here, its a great product.
http://line6.com/podstudioux/index.h...gn=PODStudioUX
You can try downloading the line 6?drivers and installing them even if you don't have the device, since the x-fi?it works for me even when the line 6 device isn't plugged in.
the drivers are here:
http://line6.com/software/readeula.html?rid=2408
Gi've it a try let me know if it fixes your issues
/matt

it probably installs a mp3 codec which is faster then the default one in windows
I installed ffdshow set of codecs, and set it to play mp3 with libmp3 which is probably faster then the windows one
here is the link : http://sourceforge.net/projects/ffdshow
ffdshow also lets you play almost any format in windows media player also, so you dont need to download separate codecs

Similar Messages

Macbook Air kernel_task problem SOLVED (a least for me)

Hi,
Introduction:
I bought my MBA original (A1237) this January. Soon after the kernel_task problem arised - it consumed some 130% - 160% of CPU.
The problem did not occur when in Safe Mode. So I asembled a list of kexts that were running after normal boot but were not running in Safe Boot. I tried to remove them manually one-by-one .... with no result. The problem persisted.
Then I began to experience problems with the top case. First my powerbutton died, then the trackpad started to behave crazy and finally my keyboard refused to work as whole.
So I bought another A1237, with cracked LCD. I disassembled both computers (using ifixit.com guides - it is really not difficult!) and put my screen assembly (the whole piece with hinges etc.) to the new-bought computer. Unfortunately the logic board had EFI password on and the seller did not know it
I've been going crazy and as a last resort I removed the logic board and replaced it with my original logic board.
Well - now it works No kernel_task problem, the comp has been now running for 24 hrs and both cores are performing between 5 and 50%.
WHY did it work?
I don't know.
The top case problem probably had nothing to do with it. It just happened by the way.
Well, many users have reported this problem as a CPU temperature related.
The only thing I can imagine is that the thermal paste, that assures thermal conductivity between the cores and the heatsink was "worn", old, dried, cracked... This can happen when it is exposed to low temperatures. The cores overheat then. My system reported CPU temp between 30-50 Celsius, but I think that this is measured at the heatsink, not at the CPU directly.
Solution you may want to try:
Disassemble your Air to the point where you remove the heatsink. Remove the thermal paste from both the CPUs and the heatsink a replace it with a new layer. (My paste cost some $5.) Then put it all back together. Use guides at www.ifixit.com, there is guide for applying the thermal paste too. You will need just a tiny screwdriver.
I cannot tell for sure that this will work for you but I simply cannot imagine anything else, that could have solved the problem for me. Sometimes it is probably just disassemble-reassemble.
Unfortunately I have no clue why the kernel_task problem did not occur when in Safe Mode.
Well, that's all I know. I know a little but am happy to have it working in the end...

Seems to be related with AppleHDA Audio Codecs (old ones from OS10.8 work), that's why when you guys unplug the headphones the CPU level cames to normal levels. This problem is still not solved.
I've been chating with some Apple amployees about it and they say it's a Maverick's problem. I've said them that so many people is having this problem in Apple's official forums and they reccommend me to say you guys to open a "Feedback Bug Report" in Apple's website: http://www.apple.com/feedback/
They told me that in the forums where you guys explain this issue, they don't read it them all, and the worst of all, apple enginyeers don't read them. So, i reccommend you to open a Bug Report in order to let them know about this problem and giving them enough information to solve it.
Thanks

Soundblaster Live - Popping problem - solved on my sys

I found away to eliminate the popping on my Soundblaster Li've that I have not seen posted.
I tried almost all the other suggestions and [size="3" face="Times New Roman">accidentally did this:
Windows Start Menu> Program list>Creative>Soundblaster>Creative Diagnostics - DO TESTS. After TEST have finished, then go to TEST SPEAKERS, when at TEST SPEAKERS, I changed the setting from "2 Speakers" to "5. Speakers" and then hit TEST. All popping immediately stopped. Speakers tested fine with no more noise what so ever?- I only have a 2 speaker system. When I put it back on "2 speakers" or even "4 speakers" the popping returned.

I upgraded my MBP15 to 10.5 on Friday. Last night, I was working on a draft that I had saved on my IMAP account. For some reason, I changed the "send" account to .Mac and the program quit. Then I got a message that I had never seen before about "resetting to factory settings" or something like that. The program would then open up, made new drafts for every minute I had worked on the message, 12:06 - 12:26. It would quit every five drafts or so, and then I would open it up after the "reset" message. By the time it was done quitting, 192 drafts were stored "On My Mac." At some point during this whole fiasco, I did see the "append" error several times.
I finally got the program stable and sent my message. I heard the "swoosh," but it did not save in the "sent folder." I made sure that, in fact, there still was only one "sent" folder for the IMAP account and tested it by sending an IMAP to .Mac test. Sure enough, it sent without saving a copy in the sent folder. The same problem happens with 10.5 on an iMac G5, but it's all good on my 10.4 mini G4.
Perhaps this has something to do with the Daylight savings mix-up. I've been using .Mac webmail this morning, and it adjusted back to standard time already.

Cracking and popping noise Sound Blaster x-Fi Platinum Running on Windows 7 32 Bit

Hi everyone, I am using a x-fi platinum card and it simply wont work with Windows 7 Ultimate 32 Bit. I have been using both windows 7 public beta and release candidate for last 8 months. Let me give you my PC configuration.
Intel Pentium D 3.4GHz
2GB DDR2 Memory running in Dual Channel Mode
ATI Radeon HD 4670 Video Card With 52MB DDR3
It has a built in sound on mother board (Disabled at the moment)
With the above configuration I tried using my x-fi platinum on both Windows XP and Windows Vista, and it worked perfectly without any problem. When I upgraded to windows 7 beta for the first time with the creative beta driver for windows 7, I noticed that whenever there is any on screen activity, such as minimizing and maximizing windows, switching windows, scrolling, photo or webpage transition, etc. there are cracking and popping noises. And if there are continuous or too much activity on the screen at some times the sound card completely fails and unable to provide any sound. When I took the sound card out and enabled the on board audio chip (Realtek HD Audio), the sound was fine without any cracking or popping issue. I eventually upgraded to Windows 7 RC and also currently using the latest driver for windows 7 and I am still having the same problem. As a reasult I am being forced to use the on board realtek audio solution which provides really crappy sound compared to x-fi platinum.
It appears that the problem exists only when I try to run x-fi platinum on windows 7. I really hope there is a solution for this otherwise I will have to sell my beloved sound card which I have been using for at least 3 years on ebay and stick with low quality Realtek HD sound system.

Sille wrote:
seems X-FI cards got the problem.... shud be hotfixed by creative.
Not all of them, I have none of those problems with my Xtreme Music. This won't help the guy asking about the Xtreme Audio (search the Sound Blaster section for the one for your card), but using this,
http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485
with this installed over the top,
http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Auzen-Forte-driver-2-20-000-HomeTheater-HD-RC4/td-p/53548
I don't get any of the popping and cracking that others do.

Cracking and popping over FireWire

Audio or videos files played back with QuickTime over my FireWire connection are accompanied by quite a bit of cracking and popping. The crackling is not heard during quiet portions of the file. The format of the file doesn’t seem to matter (.mov, .wav, etc.). I can play back the same files over FireWire with other playback software, like VLC, and the problem disappears.
Interestingly, this problem with QT also disappears when listening with headphones plugged into the jack on my mac. In other words, the problem only occurs when I use QT and pipe the output through FireWire.
My FireWire goes into a mixer, an Onyx-1220i and from there gets piped into my studio speakers using the "Control Room Out" jacks.
Listen closely to the link for a sample recorded directly from my studio speakers using my iPhone: https://dl.dropboxusercontent.com/u/15366433/Recording.m4a
I have a MacBook Pro Retina (2012 model).

this is a known bug to many users on the forums look at this thread
https://discussions.apple.com/thread/5470956?tstart=0
and this one about interfaces
https://discussions.apple.com/thread/5484036

Mediawiki, mysql, php? problems [SOLVED]

On Sunday my Arch install that is hosted by Slicehost became unresponsive to them so they had to do an emergency reboot. After it came back up my install of mediawiki was (and still is) only returning a blank page (at least in Firefox). After some digging I found out that part of the problem was that mysqld wasn't starting so I managed to get that fixed by commenting out the lines relating to innodb and putting in skip-innodb into my.cnf. But I'm still getting a blank page.
According to Mediawiki's manual, "A blank white page indicates a PHP error which isn't being printed to the screen." They give two lines to put into LocalSettings.php to force error messages but after doing that I'm still getting a blank page. Changing display_errors in php.ini to ON didn't have any effect. When I load the wiki in Safari I get the following error: "Got java.io.EOFException (Server closed connection while sending the HTTP header.): http://some_url.com/mediawiki/index.php/Main_Page". I have no idea what this error means and googling java.io.EOFException doesn't bring up anything very helpful. My PHP Test Page indicates that PHP is up and running.
Any ideas on fixes or where I can find more clues?
[EDIT]
Mysql was definitely the root of the problems with Mediawiki. I tried nearly every suggestion listed in the forums for fixing a mysql install that wouldn't start but nothing worked. I even completely uninstalled mysql and reinstalled it but it still refused to start. I switched over to postgresql and switched mediawiki to run with that. Problem solved.
Last edited by k_odoma (2009-05-23 01:48:35)

There are some other things that must be done to connect to
the database
(such as passing the usernamee, password, and host info to
mysql_connect()
and storing the connection resource), and those might be in
the include
files. I generally place all of the connection parameters in
a separate file
that is located in a folder that can't be accessed by a
browser, for
security purposes.
Paul Swanson
Portland, Oregon, USA
"Amy Blankenship *AdobeCommunityExpert*"
<[email protected]>
wrote in message news:edk6ui$69c$[email protected]..
> What's in the include(s)?
>
> "83Dons" <[email protected]> wrote in
message
> news:edk5s5$4uk$[email protected]..
> > Here is the php code for the 'read' and 'write'
parts:
> >
> >
> >
> > <?php
> > include '......';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $sql = "select A1Answer from authorware where id =
'13'";
> > $result = mysql_query($sql);
> > $answer1 = mysql_result($result,0,"A1Answer");
> > print $answer1;
> > ?>
> >
> > <?php
> > include '............';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $newdata = $_GET['data'];
> > mysql_query("insert into authorware (A1Answer)
values('$newdata')")
or
> > die(mysql_error());
> > mysql_close(); ?>
> >
>
>

Cracking and popping on Inspire T2900 Speakers

There was a message exactly like this one on the forums about a year ago, perhaps more, and there were no responses...hopefully this proves more fruitful.
Yesterday my Inspire T2900 speakers began to pop and crack. The pops happen at regular intervals of maybe ten seconds or so, and distort sound whenever they occur. Even when there is nothing playing on them, the sound is simply obnoxious. The pops continue even when the speakers are 'off' (aka, the volume on the control is turned all the way down so that it clicks off), though they are quieter. Only when the system is unplugged completely (or the speakers unplugged from the sub unit) do they stop.
I have an audigy 4 sound card purchased this past summer. Even with headphones plugged in, the speakers still crack and pop.
Any help with this problem is greatly appreciated.

Do they still make the cracking if you unplug the leads to the computer at the speaker side? Are all connections (all computer cables, all speaker cables, and the power cable) firmly connected? Finally, it may sound silly and is highly unlikely, but nothing else in the house is being turned on to trigger it.
If none of those help i would assume the problem is with the speakers and your best bet is to contact support.

Cracking and popping so

Hey I am running the latest drivers. I have a X-Fi Fataty. and i am running Vista 64 bitAny one else getting VERRY BAD stuttering, cracking, and popping sounds in games?Titan quest for example on the main menu is COMPLETLY HORRIBLEWorld of Warcraft is doing the same issue. I didnt have this issue in XP?for Kicks i have tried moveing the card?to all my differnt PCI slots. and yes i am running ALchemy on TQ and WoW.

I have the same problem but I believe it is a Vista-64 issue not a Creative issue. I tried using my onboard sound instead and same problem. I have an nVidia 7900GTX on a 945P motherboard. The problem only happens in graphically intensi've tasks for me.

Cracking and popping has returned with version 4.3.5

I just updated to 4.3.5 and the popping and cracking is back. This is so annoying. A $300 iPod and have crap sound quality when using it in the car. I didn't have the issue with the cracking and popping when 4.3.4 was on the iPod. Can I go back to 4.3.4 on my Touch? This is unexcusable for such a high dollar mp3 player to have the same problem over and over and over. Hopefully Apple will get this taken care of.

You do see the devices heading on the left sidebar? If you don't see the sidebar, go to View>Show sidebar in the iTunes menu and then check to see if the device appears.
If that isn't the problem, go through the troubleshooting steps. It could be the Apple Mobile Device Service issue.
iOS: Device not recognized in iTunes for Windows - Support - Apple

Cracks and popping sound: A never ending sto

A few years ago i had few cumputers (always custom made) in which i always used the same SB Li've! 3.0 card (Windows 98 SE). Worked like a charm without any problem.
Then i upgraded to Windows XP and the problems started. I still kept using that SB Li've! 3.0 but i had cracks and pops in about every sound environment i used (games, CD playback etc). In the end, i got rid of the SB Li've! 3.0 and started using the onboard sound from the motherboard (ASUS at first). This was a RealTek AC97. All problems gone, no cracks, no pops, just great sound without any problems.
I did upgraded again, now to an MSI motherboard also with integrated sound (RealTek AC97). Just as with the ASUS, not a single problem soundwise.
Then a few days ago, i decided to look for an add-on soundcard again to reduce the CPU workload a bit. Guessing the old SB Li've! 3.0 and XP didn't go along fine, i went for cheap SB Li've! Audigy. Disabled the onboard AC97, removed it's drivers, installed the Audigy without any problems, updated the Creative drivers to the latest version and rebooted my system... guess what... the cracks and the pops in the sound are back in about every sound environment i use.
Today, i reverted back to the AC97... No more cracks and pops!!!!
Since i used a varity of hardware with various chipsets which all worked fine as long as there was no Creative soundcard involved, i can only conclude that your product has some serious problem (and regarding the same remarks made on various forums, i'm far from the only one). I tried about every solution i could find, without succes until this date.
Therefore, i decided that this will be my last Creative product ever bought.

Well, i got it working. I tried about everything i came accros (IRQ settings, PCI latency and stuff like that) but nothing really helped. Forcing IRQ's in the MB's BIOS didn't help and Latency was AOK.
Then i did read here somewhere that you can change your computer setting from ACPI to Standard PC in the device manager and that this helped. So i checked that but i could not change to a Standard PC like mentioned in a previous topic. Since i'm planning a complete re-install when my new Videocard arri'ves this week, i thougt "what the heck", let's do some extra testing. The only thing i could do was uninstall the ACPI driver. I did this, rebooted and i had to set a few settings (video and stuff) back to my settings because they reverted back to default. Also, every hardware on the USB asked for a re-install. Since everthing was still install, this was a piece of cake.
So after removing the ACPI driver (although the device manager says that it's still an ACPI PC), and resetting a few setups + re-installing a bit of hardware, i tried and soundcard and BINGO!, no cracks, no pops, no tics anymore. Sound is just as smooth as a baby's ass now.. :-)
BTW: For those interrested in my setup: MSI K8T Neo motherboard, AMD Athlon 3000+ 64bit, GB Ram, GT6600 256MB DDR3, SB Audigy LS, 200GB SATA Harddisk & a 40 GB HD on IDE as back up, Plextor CD 6x burner, HP printer, Cougar stick and throttle (modded), TrackIR, etc...

PROBLEM SOLVED--CS5 WIN7 X64 INSTALL ERROR DEPENDENCY FAILURE

PROBLEM SOLVED!!!!!!!!!!!!
I just spent 9 hours straight on this, but will was stronger than "its". Now I have both cs4 and cs5, but hopefully it will work if you just have cs5 as well. I also did not try runnning cs5 installer first after implementing the fix, maybe that will work too..And when getting the cs5 error, I went to re-install cs4 but got an error as well so that is why I took the steps I did. On 7x64 do the followin
First run the cs5 cleanup tool and reboot.
Second, go into c:\program file(x86)\common files\adobe\installers . Delete everything in it
Then go into you registry (start, run, then type regedit) and expand to this registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\ Components ...(if this isnt there, try an install again, then go to the folder that you deleted the files from a moment ago and extract the log from the zip file and open it and go to the end. where it says error 1402 will be followed by a unknown\components\(a bunch of numebers right here)\(more numbers) ...
Copy the numbers directly after the components\ and go back into registry and click edit then "find" paste those numbers into the box and hit find..when you get to the key, scroll ALL the way back up to components again. Right click components and hit permissions.. Go to advanced and then the ownership tab up top.. click edit, hightlight administrator(s), check the box to "replace subcontainers" and click apply. respond yes to everything and close that and hit apply again if asked. then click the add button above the advanced button you just clicked. when the new box appears, click advanced and then click find now. Highlight Administrators and SYSTEM and hit OK. Then give both of them full rights and hit apply. Then click advanced again and in the first window check the box that says "replace all child objects...." and hit apply. accept the prompts and hit okay.
Now go into c:\windows and on the system32 folder, right click and go to properties. Go to the security tab. Click advanced and then "owner" and click edit. highlght administrators and check the box "replace all child object....." again and hit apply....
Now give Administrators, SYSTEM, AND TrustedInstaller full rights by clicking edit above the advanced tab in the first properties box.. Then click advanced again and in the first window click replace all child object....." again and hit apply....
Now do the same for the winsxs folder and (for good measure i did syswow64 but not sure if its necessary)...
Now you should be able to install both versions..(as i said, I installed cs4 first, maybe it was not necessary)...
If you dont like the idea of just blindly giving administrators full rights to all system folders, you can spend MANY MANY hours running the installs over and over and getting the faulty registry value that caused it to fail and create specific permissions for that and then go on to the next value that fails......what a pain
Message was edited by: DarkMatter78

Thank you for this.
I have been trying to install CS5 MC now for weeks. I first got it to install everything except After Effects and Premiere Pro. Then trying to follow all the suggestions on this forum I wound up not being able to install any part of it at all. Now..
Well...following your kind suggestions as much to the letter as I could I have now been able to install everything...except Affter Effects and Premiere Pro. Sigh.
At least I can get back to work on everything that doesn't require AE and PPro. I still need to get them installed and working.

Outgoing email problem solved

Several people have reported that after they switched to Yosemite, they can still receive emails on Exchange but they can't send emails. The problem may be attempting to send an email with a corrupted address. In Mountain Lion, attempting to send an email on Exchange with a corrupted address would trigger a warning saying the email cannot be sent. On Yosemite, there is no warning. The email with the corrupted address is held in the Outbox and all subsequent outgoing emails queue up behind it. It would save people a lot of time if Apple reestablished the warning. In the meantime, keep an eye on your Outbox.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

EMAIL Problem Solved!! Sending works on Roadrunner

I'm on a Roadrunner account. It has been impossible to send email when I switch to the Edge network.
Problem solved!
Go to www.fastmail.fm and sign up for the "Member" level of service. It's a ONE TIME charge of $14.95. Not a big deal and you never have to pay it again. Now you enter in their smtp server address and authenticate with your new name and password. When the iPhone switches networks, it no longer matters!
I know this involves paying a fee to get it to work. But it's the only way I have found to be able to use your own address to send and receive on Roadrunner. The gMail work around is fine but it's not the same as sending from your address that everyone knows.

roadrunner is a problem depending on where you are
connecting from. sometimes they may pick it up s
spam and reject sending email.
the easiest fix, and by far the cheapest (because it
is free) is to simmply put in at&t's wireless smtp
server info. under smtp server put in wcmx.com and
leave username and password blank. that's all you
have to do, and you odn't have to worry about being
in an area where roadrunner rejects email.
This works if you are on the Edge network outside a RR wifi connection. Once back to your home or office, you will not be able to send mail.
The only options are:
Create two accounts for each mail account--one with the RR info and one with the edge info. When you want to send a message, you send via the one that is currently connected.
or
Use an smtp server from fastmail.fm (or other) that will let you authenticate to send mail. Use that server as your outgoing mail server for POP accounts. It works, I'm using it now.

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

How to problem solve adf issue in the mx340 model

how to problem solve adf issue in the mx340 model

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

Crack'N'pop problem Solved (at least on my syst

Similar Messages

Maybe you are looking for