Crazy Matrix Visuals

I've recently started experiencing some sort of graphics meltdown on my Powermac G5. I don't know much about graphics cards etc., so if anyone can tell me what's going on or where to start troubleshooting I'd appreciate it. It's an old G5, one of the pre-intel macs, dual 2ghz, etc. I'm running a Radeon 9800 Pro (the Radeon site lists a Mac edition and a Mac special edition for the drivers download, I'm not sure which one I have), on OX 10.5.2. When I turn the computer on there are strange bars running down the screen that consist of pixel patterns, when I log in they change colors and continue to fill the entire screen, altering and going crazy as I move bars etc. All of the programs within are running fine, and I know the monitor is alright because as I log in, the typical light blue screen that comes on for a moment is perfectly clear. The problem start when I was running World of Warcraft, so I don't know if that has been putting a strain on my older card and computer or what. Anyone know where to start or have experienced a similar problem?

I had a similar problem and Mac - do the following:
1. Run a Apple Hardware Diagnostic check from the Startup disk - hold down the Options key, Select Hardware Diagnostic and then select Extended. It takes about 2 hours. This confirmed that it was the Graphics board (Video (RAM)) and not the Logic board (contrary to the view of Apple and TechServe - both of whom wanted me to bring the G5 in for their diagnostic ... $150 +)
2. Purchased the new board (from B&H Photo):
http://ati.amd.com/products/Radeon9600/Radeon9600propcmac/index.html
3. Installed the new board - 5 minutes - remove one screw - carefully remove cooked 9800 board - install new board - replace screw. This is really easy to do.
4. Install new 9600 software (which the manufacturers suggest you do first) - it automatically overwrites the necessary 9800 files.
5. Purchase and connect the Apple ADC-to-DVI converter ($99) - this is required to connect the new 9600 video card to the Apple Cinema 23" display.
6. Reboot
Normal serve resumed.
Best
Dom

Similar Messages

Difference between Matrix.Visual RowCount and ...

Hi
Is there any Difference between VisualRowCount and RowCount of Matrix ??
thx

Hi Pankaj,
The help file explains it like this:
VisualRowCount: Returns a long integer specifying the number of rows in the matrix excluding deleted and collapsed rows
RowCount: Returns the number of rows in the matrix
Hope it helps,
Adele

Scanning a matrix with collapsible rows

Hello all,
I need to scan the right matrix (ItemUID = "2") on the "Purchase Order Confirmation" form. This matrix has collapsible rows, and I can only scan through them if they are all expanded (not collapsed).
Is there a way to check whether there are any collapsed rows in a matrix on a system form? I tried comparing Matrix.RowCount with Matrix.VisualRowCount, but it didn't work.
An even better solution cound be to expand all the matrix's rows through UIApi, but I couldn't do it either...
Thanks in advance,
Anton

Hi Anton,
Hope these threads will have some values to you:
Data from collapsed grid by Events
Re: difference between Matrix.Visual RowCount and ...
How do you read data from collapsed rows in a matrix
Thanks,
Gordon

Adding Columns to the matrix in SAP B1 user form using Visual studio 2010

Hi,
Using Visual studio 2010, I have created a SAP B1 user form( b1f ) with one matrix.Matrix is having 5 columns. Its working properly. Later, I want to add few more columns. Then I added columns to the matrix as I have created columns initially. But, it does not saves.
i.e, Whenever I run, In B1 I could see only old columns. Newly created columns are not showing.So, I closed the .net project and opened again. Created columns are not showing in visual studio b1f itself. So, I created again and saved. But, its not saving.I tried it many times.
What I am missing?
Any help is appreciated.
Thanks in advance,
Parvatha Solai.N

Hi Parvatha,
Are you using B1 Studio? Anyway try to clean the solution first then rebuild it. This would re-copy files to the output directory, that contain your changes.
Best regards,
Pedro Magueija

Photo Matrix from folder

Hello how are you?
I really really need your help.
I have an aleatory number of squared pictures (ex: 4x4 of 6x6, or 10x10, etc) that may change everytime.
These files together become a "big picture".
What I want is an action to photoshop make a collage respecting the number of rows and collumns.
So, row 1 would have: Picture 1.png in collum 1; picture 2.png in collum 2
than row 2 would have: picture 3.png in collum 1; picture 4.png in collum 2
How can I do that?
Can I make an action that if I settle the matrix size, photoshop can take all the pictures from one folder and fulfill that matrix?
Thank you so much!
L2berzins

Hello! I cannot believe I could have all these help in such a short time, you guys are amazing!!!
I am really a beginner, so yall are my photoshop guides! So I am sorry if I have so many questions.
What I am looking for is much much more simple than what i have been reading from you guys.
I am a beginner and i don't know what I am doing.
I saw the script, thank you, but First of all (and most important):
how do I save the script?
where do I save the script?
and how do i run the script?
So, hands on:
I went to your web page, I thought I was the only one in the world trying to do this crazy thing, so I was releived that I could have some help.
I saw that your final result is a poster that have 4 collums x 14 lines, with no border and no spacing.
I work in an orphanage and I have a folder 4x4 (640 pixels x 640 pixels) pictures in alphabetic order
What I want is:
a square poster, that the number os lines is equal the number of collumns.
I will receive a folder with images that all of them are either .jpg or .png, in alphabetic order, 640 pixels x 640 pixels.
What I DONT WANT is:
Neither of the pictures cannot have any alteration (size, resolution, dpi, colors, etc)
No border and no spacing
I CANNOT be aleatory, it has to follow the alphabetic order
I dont want them to be in different layers
I dont want to use alpha channels
I just want the square shape, pictures to be side by side, in alphabetic order, like in your example
If my folder have pictures from zero to 15, the final poster with 4 collumns x 4 rows would be:
picture0.jpg   picture1.jpg   picture2.jpg   picture3.ppg
picutre4.jpg   picture5.jpg   picture6.jpg   picture 7.jpg
picture8.jpg   picture9.jpg   picture10.jpg picture11.jpg
picture12.jpg picture13.jpg picture14.jpg picture15.jpg
Can this be a simple action?
Thank you all so much,
[ unreadable colors removed by admin ]

Running object track code on visual c++ with open CV

Dear all,
I am newbie to config the open CV in visual c++.
i have visual studio 2013 desktop version & open CV beta v3.0; I have config the data as per link shared
Config opencv I have downloaded the example code from youtube ; link for the code as followyoutube
link
visual c++ code
#include <sstream>
#include <string>
#include <iostream>
#include <opencv\highgui.h>
#include <opencv\cv.h>
using namespace cv;
//initial min and max HSV filter values.
//these will be changed using trackbars
int H_MIN = 0;
int H_MAX = 256;
int S_MIN = 0;
int S_MAX = 256;
int V_MIN = 0;
int V_MAX = 256;
//default capture width and height
const int FRAME_WIDTH = 640;
const int FRAME_HEIGHT = 480;
//max number of objects to be detected in frame
const int MAX_NUM_OBJECTS=50;
//minimum and maximum object area
const int MIN_OBJECT_AREA = 20*20;
const int MAX_OBJECT_AREA = FRAME_HEIGHT*FRAME_WIDTH/1.5;
//names that will appear at the top of each window
const string windowName = "Original Image";
const string windowName1 = "HSV Image";
const string windowName2 = "Thresholded Image";
const string windowName3 = "After Morphological Operations";
const string trackbarWindowName = "Trackbars";
void on_trackbar( int, void* )
{//This function gets called whenever a
// trackbar position is changed
string intToString(int number){
std::stringstream ss;
ss << number;
return ss.str();
void createTrackbars(){
//create window for trackbars
namedWindow(trackbarWindowName,0);
//create memory to store trackbar name on window
char TrackbarName[50];
sprintf( TrackbarName, "H_MIN", H_MIN);
sprintf( TrackbarName, "H_MAX", H_MAX);
sprintf( TrackbarName, "S_MIN", S_MIN);
sprintf( TrackbarName, "S_MAX", S_MAX);
sprintf( TrackbarName, "V_MIN", V_MIN);
sprintf( TrackbarName, "V_MAX", V_MAX);
//create trackbars and insert them into window
//3 parameters are: the address of the variable that is changing when the trackbar is moved(eg.H_LOW),
//the max value the trackbar can move (eg. H_HIGH),
//and the function that is called whenever the trackbar is moved(eg. on_trackbar)
// ----> ----> ---->
createTrackbar( "H_MIN", trackbarWindowName, &H_MIN, H_MAX, on_trackbar );
createTrackbar( "H_MAX", trackbarWindowName, &H_MAX, H_MAX, on_trackbar );
createTrackbar( "S_MIN", trackbarWindowName, &S_MIN, S_MAX, on_trackbar );
createTrackbar( "S_MAX", trackbarWindowName, &S_MAX, S_MAX, on_trackbar );
createTrackbar( "V_MIN", trackbarWindowName, &V_MIN, V_MAX, on_trackbar );
createTrackbar( "V_MAX", trackbarWindowName, &V_MAX, V_MAX, on_trackbar );
void drawObject(int x, int y,Mat &frame){
//use some of the openCV drawing functions to draw crosshairs
//on your tracked image!
//UPDATE:JUNE 18TH, 2013
//added 'if' and 'else' statements to prevent
//memory errors from writing off the screen (ie. (-25,-25) is not within the window!)
circle(frame,Point(x,y),20,Scalar(0,255,0),2);
if(y-25>0)
line(frame,Point(x,y),Point(x,y-25),Scalar(0,255,0),2);
else line(frame,Point(x,y),Point(x,0),Scalar(0,255,0),2);
if(y+25<FRAME_HEIGHT)
line(frame,Point(x,y),Point(x,y+25),Scalar(0,255,0),2);
else line(frame,Point(x,y),Point(x,FRAME_HEIGHT),Scalar(0,255,0),2);
if(x-25>0)
line(frame,Point(x,y),Point(x-25,y),Scalar(0,255,0),2);
else line(frame,Point(x,y),Point(0,y),Scalar(0,255,0),2);
if(x+25<FRAME_WIDTH)
line(frame,Point(x,y),Point(x+25,y),Scalar(0,255,0),2);
else line(frame,Point(x,y),Point(FRAME_WIDTH,y),Scalar(0,255,0),2);
putText(frame,intToString(x)+","+intToString(y),Point(x,y+30),1,1,Scalar(0,255,0),2);
void morphOps(Mat &thresh){
//create structuring element that will be used to "dilate" and "erode" image.
//the element chosen here is a 3px by 3px rectangle
Mat erodeElement = getStructuringElement( MORPH_RECT,Size(3,3));
//dilate with larger element so make sure object is nicely visible
Mat dilateElement = getStructuringElement( MORPH_RECT,Size(8,8));
erode(thresh,thresh,erodeElement);
erode(thresh,thresh,erodeElement);
dilate(thresh,thresh,dilateElement);
dilate(thresh,thresh,dilateElement);
void trackFilteredObject(int &x, int &y, Mat threshold, Mat &cameraFeed){
Mat temp;
threshold.copyTo(temp);
//these two vectors needed for output of findContours
vector< vector<Point> > contours;
vector<Vec4i> hierarchy;
//find contours of filtered image using openCV findContours function
findContours(temp,contours,hierarchy,CV_RETR_CCOMP,CV_CHAIN_APPROX_SIMPLE );
//use moments method to find our filtered object
double refArea = 0;
bool objectFound = false;
if (hierarchy.size() > 0) {
int numObjects = hierarchy.size();
//if number of objects greater than MAX_NUM_OBJECTS we have a noisy filter
if(numObjects<MAX_NUM_OBJECTS){
for (int index = 0; index >= 0; index = hierarchy[index][0]) {
Moments moment = moments((cv::Mat)contours[index]);
double area = moment.m00;
//if the area is less than 20 px by 20px then it is probably just noise
//if the area is the same as the 3/2 of the image size, probably just a bad filter
//we only want the object with the largest area so we safe a reference area each
//iteration and compare it to the area in the next iteration.
if(area>MIN_OBJECT_AREA && area<MAX_OBJECT_AREA && area>refArea){
x = moment.m10/area;
y = moment.m01/area;
objectFound = true;
refArea = area;
}else objectFound = false;
//let user know you found an object
if(objectFound ==true){
putText(cameraFeed,"Tracking Object",Point(0,50),2,1,Scalar(0,255,0),2);
//draw object location on screen
drawObject(x,y,cameraFeed);}
}else putText(cameraFeed,"TOO MUCH NOISE! ADJUST FILTER",Point(0,50),1,2,Scalar(0,0,255),2);
int main(int argc, char* argv[])
//some boolean variables for different functionality within this
//program
bool trackObjects = false;
bool useMorphOps = false;
//Matrix to store each frame of the webcam feed
Mat cameraFeed;
//matrix storage for HSV image
Mat HSV;
//matrix storage for binary threshold image
Mat threshold;
//x and y values for the location of the object
int x=0, y=0;
//create slider bars for HSV filtering
createTrackbars();
//video capture object to acquire webcam feed
VideoCapture capture;
//open capture object at location zero (default location for webcam)
capture.open(0);
//set height and width of capture frame
capture.set(CV_CAP_PROP_FRAME_WIDTH,FRAME_WIDTH);
capture.set(CV_CAP_PROP_FRAME_HEIGHT,FRAME_HEIGHT);
//start an infinite loop where webcam feed is copied to cameraFeed matrix
//all of our operations will be performed within this loop
while(1){
//store image to matrix
capture.read(cameraFeed);
//convert frame from BGR to HSV colorspace
cvtColor(cameraFeed,HSV,COLOR_BGR2HSV);
//filter HSV image between values and store filtered image to
//threshold matrix
inRange(HSV,Scalar(H_MIN,S_MIN,V_MIN),Scalar(H_MAX,S_MAX,V_MAX),threshold);
//perform morphological operations on thresholded image to eliminate noise
//and emphasize the filtered object(s)
if(useMorphOps)
morphOps(threshold);
//pass in thresholded frame to our object tracking function
//this function will return the x and y coordinates of the
//filtered object
if(trackObjects)
trackFilteredObject(x,y,threshold,cameraFeed);
//show frames
imshow(windowName2,threshold);
imshow(windowName,cameraFeed);
imshow(windowName1,HSV);
//delay 30ms so that screen can refresh.
//image will not appear without this waitKey() command
waitKey(30);
return 0;
For above code i config as per in video. But didnt get OPENCV_DEBUG243 file.
error i am getting as below. Let me know how can solve the issue. What are additional info i need to include here.
1>------ Build started: Project: ObjectTrackingTest, Configuration: Debug Win32 ------
1> ObjectTrackingTest.cpp
1>c:\program files (x86)\microsoft visual studio 12.0\vc\include\cwchar(29): error C2039: 'swprintf' : is not a member of '`global namespace''
1>c:\program files (x86)\microsoft visual studio 12.0\vc\include\cwchar(29): error C2873: 'swprintf' : symbol cannot be used in a using-declaration
1>c:\program files (x86)\microsoft visual studio 12.0\vc\include\cwchar(30): error C2039: 'vswprintf' : is not a member of '`global namespace''
1>c:\program files (x86)\microsoft visual studio 12.0\vc\include\cwchar(30): error C2873: 'vswprintf' : symbol cannot be used in a using-declaration
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(38): warning C4244: 'initializing' : conversion from 'double' to 'const int', possible loss of data
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(40): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(40): error C2146: syntax error : missing ';' before identifier 'windowName'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(40): error C2440: 'initializing' : cannot convert from 'const char [15]' to 'int'
1> There is no context in which this conversion is possible
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(41): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(41): error C2146: syntax error : missing ';' before identifier 'windowName1'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(41): error C2086: 'const int string' : redefinition
1> c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(40) : see declaration of 'string'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(41): error C2440: 'initializing' : cannot convert from 'const char [10]' to 'int'
1> There is no context in which this conversion is possible
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(42): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(42): error C2146: syntax error : missing ';' before identifier 'windowName2'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(42): error C2086: 'const int string' : redefinition
1> c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(40) : see declaration of 'string'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(42): error C2440: 'initializing' : cannot convert from 'const char [18]' to 'int'
1> There is no context in which this conversion is possible
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(43): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(43): error C2146: syntax error : missing ';' before identifier 'windowName3'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(43): error C2086: 'const int string' : redefinition
1> c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(40) : see declaration of 'string'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(43): error C2440: 'initializing' : cannot convert from 'const char [31]' to 'int'
1> There is no context in which this conversion is possible
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(44): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(44): error C2146: syntax error : missing ';' before identifier 'trackbarWindowName'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(44): error C2086: 'const int string' : redefinition
1> c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(40) : see declaration of 'string'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(44): error C2440: 'initializing' : cannot convert from 'const char [10]' to 'int'
1> There is no context in which this conversion is possible
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(54): error C2146: syntax error : missing ';' before identifier 'intToString'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(54): error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(54): error C2373: 'string' : redefinition; different type modifiers
1> c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(40) : see declaration of 'string'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(59): error C2440: 'return' : cannot convert from 'std::basic_string<char,std::char_traits<char>,std::allocator<char>>' to 'int'
1> No user-defined-conversion operator available that can perform this conversion, or the operator cannot be called
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(60): error C2617: 'intToString' : inconsistent return statement
1> c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(54) : see declaration of 'intToString'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(65): error C3861: 'namedWindow': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(79): error C3861: 'createTrackbar': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(80): error C3861: 'createTrackbar': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(81): error C3861: 'createTrackbar': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(82): error C3861: 'createTrackbar': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(83): error C3861: 'createTrackbar': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(84): error C3861: 'createTrackbar': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(97): error C3861: 'circle': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(99): error C3861: 'line': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(100): error C3861: 'line': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(102): error C3861: 'line': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(103): error C3861: 'line': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(105): error C3861: 'line': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(106): error C3861: 'line': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(108): error C3861: 'line': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(109): error C3861: 'line': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(111): error C3861: 'putText': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(119): error C2065: 'MORPH_RECT' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(119): error C3861: 'getStructuringElement': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(121): error C2065: 'MORPH_RECT' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(121): error C3861: 'getStructuringElement': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(123): error C3861: 'erode': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(124): error C3861: 'erode': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(127): error C3861: 'dilate': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(128): error C3861: 'dilate': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(138): error C2065: 'vector' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(138): error C2059: syntax error : '>'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(139): error C2065: 'vector' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(139): error C2275: 'cv::Vec4i' : illegal use of this type as an expression
1> h:\softwares\opencv\build\include\opencv2\core\matx.hpp(357) : see declaration of 'cv::Vec4i'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(139): error C2065: 'hierarchy' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(141): error C2065: 'contours' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(141): error C2065: 'hierarchy' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(141): error C3861: 'findContours': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(145): error C2065: 'hierarchy' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(145): error C2228: left of '.size' must have class/struct/union
1> type is 'unknown-type'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(146): error C2065: 'hierarchy' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(146): error C2228: left of '.size' must have class/struct/union
1> type is 'unknown-type'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(149): error C2065: 'hierarchy' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(151): error C2065: 'contours' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(151): error C3861: 'moments': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(159): warning C4244: '=' : conversion from 'double' to 'int', possible loss of data
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(160): warning C4244: '=' : conversion from 'double' to 'int', possible loss of data
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(170): error C3861: 'putText': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(176): error C3861: 'putText': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(196): error C2065: 'VideoCapture' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(196): error C2146: syntax error : missing ';' before identifier 'capture'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(196): error C2065: 'capture' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(198): error C2065: 'capture' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(198): error C2228: left of '.open' must have class/struct/union
1> type is 'unknown-type'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(200): error C2065: 'capture' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(200): error C2228: left of '.set' must have class/struct/union
1> type is 'unknown-type'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(201): error C2065: 'capture' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(201): error C2228: left of '.set' must have class/struct/union
1> type is 'unknown-type'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(206): error C2065: 'capture' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(206): error C2228: left of '.read' must have class/struct/union
1> type is 'unknown-type'
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(208): error C2065: 'COLOR_BGR2HSV' : undeclared identifier
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(208): error C3861: 'cvtColor': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(223): error C3861: 'imshow': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(224): error C3861: 'imshow': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(225): error C3861: 'imshow': identifier not found
1>c:\users\user\documents\visual studio 2013\projects\objecttrackingtest\objecttrackingtest\objecttrackingtest.cpp(230): error C3861: 'waitKey': identifier not found
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
AMPS12

// cwchar standard header
#pragma once
#ifndef _CWCHAR_
#define _CWCHAR_
#include <yvals.h>
#ifdef _STD_USING
#undef _STD_USING
#include <wchar.h>
#define _STD_USING
#else /* _STD_USING */
#include <wchar.h>
#endif /* _STD_USING */
typedef mbstate_t _Mbstatet;
#if _GLOBAL_USING && !defined(RC_INVOKED)
_STD_BEGIN
using _CSTD _Mbstatet;
using _CSTD mbstate_t; using _CSTD size_t; using _CSTD tm; using _CSTD wint_t;
using _CSTD btowc; using _CSTD fgetwc; using _CSTD fgetws; using _CSTD fputwc;
using _CSTD fputws; using _CSTD fwide; using _CSTD fwprintf;
using _CSTD fwscanf; using _CSTD getwc; using _CSTD getwchar;
using _CSTD mbrlen; using _CSTD mbrtowc; using _CSTD mbsrtowcs;
using _CSTD mbsinit; using _CSTD putwc; using _CSTD putwchar;using _CSTD swprintf; using _CSTD swscanf; using _CSTD ungetwc;
using _CSTD vfwprintf; using _CSTD vswprintf; using _CSTD vwprintf;
using _CSTD wcrtomb; using _CSTD wprintf; using _CSTD wscanf;
using _CSTD wcsrtombs; using _CSTD wcstol; using _CSTD wcscat;
using _CSTD wcschr; using _CSTD wcscmp; using _CSTD wcscoll;
using _CSTD wcscpy; using _CSTD wcscspn; using _CSTD wcslen;
using _CSTD wcsncat; using _CSTD wcsncmp; using _CSTD wcsncpy;
using _CSTD wcspbrk; using _CSTD wcsrchr; using _CSTD wcsspn;
using _CSTD wcstod; using _CSTD wcstoul; using _CSTD wcsstr;
using _CSTD wcstok; using _CSTD wcsxfrm; using _CSTD wctob;
using _CSTD wmemchr; using _CSTD wmemcmp; using _CSTD wmemcpy;
using _CSTD wmemmove; using _CSTD wmemset; using _CSTD wcsftime;
using _CSTD vfwscanf; using _CSTD vswscanf; using _CSTD vwscanf;
using _CSTD wcstof; using _CSTD wcstold;
using _CSTD wcstoll; using _CSTD wcstoull;
_STD_END
#endif /* _GLOBAL_USING */
#endif /* _CWCHAR_ */
* Copyright (c) 1992-2013 by P.J. Plauger. ALL RIGHTS RESERVED.
* Consult your license regarding permissions and restrictions.
V6.40:0009 */
this is line where it go when i clicked
AMPS12

Visualizing sound over a period of time/comparing 2 audio files graphically

Hello, this question might be a bit abstract, but I would love it if anybody could offer some insight or ideas. Apologies if there is anything related to this on the forum--I did a search but couldn't find anything. I suppose it's not entirely Logic related, but it's what I've been working with and don't really know where else to turn. Okay, so here goes:
I'm studying graphic design, and as part of a project, I need to create some information graphics to basically represent visually two similar sound sources over a period of a couple seconds. Basically, one will be an audio sample of a three second drum intro, and the second will be an approximation of that using a sampler (Logic's EXS24).
Now I have an idea in my head that I would like to explore, but I can't figure out how to get the raw data I need to illustrate it. I think what could work for me would be to take a certain number of samples, say about thirty per second, and get the raw data, say like, the amplitude of each frequency at that exact moment. Then I could draw or graph that out. And layer them. I'm sort of envisioning something along the lines of this:
I'm not really trying to be too scientific or accurate in this. It's more an attempt to sort of create a physical, or almost 3D representation of the sound, and give a sense of the physical form and time in a 2D graphic. In doing so, I hope to show some difference between the original sample (old analog recording, drenched in reverb, etc) and the dry MIDI-based one.
I'm not sure if any of this is making sense, but I hope someone might be able to offer some ideas. I've been going crazy trying every single Mac shareware audio analyzer product I can find. The problem seems to be that most of them are designed for real-time audio analysis, or that they don't really offer a way to export the data over a period of time (I think I found one that can export something that Excel can read, but it's just for one split second of audio, and not a duration.)
Sorry this is so convoluted. I'm sort of new to the audio game. Oh ya, and I have Logic Pro 7 and also have Ableton Live 5 so that's what I'm working with. Thank you so much!

call fadeSoundF() and pass the movieclip where the sound is instantiated, the sound, the end volume and the number of seconds over which you want to fade. nothing below should be changed.
function fadeSoundF(mc:MovieClip,s:Sound,vol:Number,sec:Number):Void{
clearInterval(mc.fadeI);
var volumeInc:Number = vol-s.getVolume()/(10*sec);
mc.fadeI=setInterval(fadeF,100,mc,s,volumeInc,vol);
function fadeF(mc:MovieClip,s:Sound,inc:Number,endVol:Number):Void{
s.setVolume(s.getVolume()+inc);
if(Math.abs(s.getVolume-endVol)<inc){
clearInterval(mc.fadeI);

How to use the transformation matrix in Placed Suite.

I am in trouble how to use the transformation matrix Placed Art (PlacedSuite ).
       AIRealMatrix rasterMatrix;
AIRealMatrix placedMatrix;
if (artType == kRasterArt {
     error = sAIRaster-> GetRasterMatrix (art, & rasterMatrix);
} else if ((artType == kPlacedArt) {
     error = sAIPlaced-> GetPlacedMatrix (art, & placedMatrix);
When I converted to using the transformation matrix of PlacedArt, the target art could not be converted to expect.
I could convert in case of the RasterArt. (The reference point of the transformation matrix of RasterArt is (0,0).)
In the PlacedArt, preference point is not (0,0)?
The tx/ty of the transformation matrix of PlacedArt is not correct?
In the transformation matrix of RasterArt and Placed Art, how are those two different?

The short answer is "no", (0, 0) is not the origin of placed art (unlike kRasterArt). Off the top of my head, I believe when you place art, its original state is upside-down and flipped horizontally in the upper-right of the artboard. If you want to see where it starts, simply create an identity matrix and apply that as the matrix for the kPlacedArt and you'll see how it starts. Yes, its pretty crazy.
minimum99 posted some code that might help. I haven't tried it (I rolled my own years ago) but I'd give it a whirl:
http://forums.adobe.com/message/3195790#3195790

How to add a cell from 2 different tables in 2 different Matrix(s) that reside on the same rdlc report?

Hello Community
    Using Visual Studio 2008 I have created a Windows Forms Application in which I created
Embedded Reports (rdlc).
    The embedded reports (rdlc) uses Matrix(s).
    Now on this one rdlc I have dragged 2 Matrix(s) onto the body.
    One of the Matrix datasource dataset name and table name is "DataSet1_Table1.
    A cells in the Matrix has a total column on the end as follows:
=FormatNumber(Sum(Fields!fld1.Value)+Sum(Fields!fld2.Value)+Sum(Fields!fld3.Value)+Sum(Fields!fld4.Value)+Sum(Fields!fld5.Value),"0")
    The other Matrix datasource dataset name and table name is "DataSet2_Table2.
    The cell in this Matrix has a total column on the end as follows:
=Sum(Fields!fld1.Value)+Sum(Fields!fld2.Value)+Sum(Fields!fld3.Value)+Sum(Fields!fld4.Value)+Sum(Fields!fld5.Value)
    As you can see each Matrix has a different table.
    I would like to add the total columns from each table in each Matrix but I haven't been
able to do it successfully. If I have to drag another Matrix or a Textbox on the
body to do it that is okay and/or add another/different formula to a cell onto the body that is
okay too.
    So my question is how can I add the contents of the total in cell from each table in each matrix
which will create the "grand total"?
    Thank you
    Shabeaut

It is possible to reference SSRS elements directly using the ReportItems collection. If your total tablix cell is outside of yoour matrix groups, you can use this collection to accomplish what you want:
=ReportItems!Matrix1Total.Value + ReportItems!Matrix2Total.Value
where Matrix1Total and Matrix2Total is the name of the cell that contains your totals. Note that for this to work, the cell name must be unique. If the total cell is inside a group, it will be repeated once for each instance of the group and will not be
unique.
You may be able to do it using the Sum aggregate and specifying the dataset for the scope variable:
=Sum(Fields!fld1.Value, "DataSet1")+Sum(Fields!fld2.Value,
"DataSet1")+Sum(Fields!fld3.Value,
"DataSet1")+Sum(Fields!fld4.Value,
"DataSet1")+Sum(Fields!fld5.Value,
"DataSet1")+Sum(Fields!fld1.Value,
"DataSet2")+Sum(Fields!fld2.Value,
"DataSet2")+Sum(Fields!fld3.Value,
"DataSet2")+Sum(Fields!fld4.Value,
"DataSet2")+Sum(Fields!fld5.Value,
"DataSet2")
This will work as long as you are not filtering the dataset in your Matrix properties. If you are, those
filters will not apply to this expression and the numbers will not total correctly.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Is there a way to combine matrix data?

If anyone can, please help me. Linear algebra is not my
specialty.
I am trying to make a function using the BitmapData.hitTest()
to see if two sprites on screen are hit.
I have got it working for sprites that are direct siblings
(ie they are on the root stage layer). However, if I nest sprites,
things get messy. The reason I want to test nested objects is so I
can test for collision with *parts* of other visual components, not
the whole thing as one.
I can get a proper tx, ty value for nested sprites by using
the localToGlobal functions, but these do not take into
consideration rotation. Is there something like localToGlobal that
works for an object's entire transform matrix (and if not, why
not?!)?
Does anyone have any advice?
The only thing I can think of is to go through a given
sprite's parents until it reaches the top (root) layer and collect
the matrix data on the way. But even if I do that, I don't know how
to add the matrices together properly. I am convinced I need to do
this. If I don't use the actual transform matrix, I cannot take
into account skewing, rotation, etc.

Well, I seem to have found a way to at least combine matrices
using the concat() method. Still, I have to cycle through each
parent matrix from the target sprite to the top level (stage) to
get a universal comparison.

Setup with MS Visual C++ Runtime Library Error, Win7/CS5

Hio All,
It's driving me crazy here trying to get my Photoshop and my Adobe Production Suite CS5 working. I had an Alienware computer with Windows 7 64-bit and it installed perfectly. Now my new computer is a Xeon E5-2660, with 32GB of RAM, an ASUS Z9-PE-D8 WS motherboard with a Radeon HD 5870 1GB VRAM video card (same video card on my Alienware). I did a fresh Win7 64bit Professional install, all goes well. I'm also installing other programs and they all go well. It's when I install CS5 (but really Photoshop is my biggest concern since I need it for freelance work) and sometimes RIGHT at the end of the third disc installation at 99% (installing the Language Pack for ENG) it crashes. Sometimes it doesn't, and goes through perfectly. Either case, when I open any Adobe CS5 suite program (except for Bridge), it would crash immediately with a dialogue box saying
"Microsoft Visual C++ Runtime Library" -- Runtime Error!
Program: C:\Pro...(truncated)
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
And that's it, the program logo doesn't even launch, just this box. After hours and hours of trying different settings, I found out was if I disabled the service "Windows Management Instrumentation" in msconfig, the dialogue box would go away and anay CS5 product would launch without a hitch. But, it leaves other programs that use that service unable to launch as well, and Windows Defender is the biggest one that uses that service.
I've searched the internet and hundreds of other threads relating to Visual C++ error here on this forum, but none give a definitive answer to why my computer may keep crashing. I've reformatted and reinstalled CS5 over and over again...still these crashes...Please help in anyway!!
Event Log when it crashes on loading:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
System
Provider
[ Name]
Microsoft-Windows-WMI
[ Guid]
{1edeee53-0afe-4609-b846-d8c0b2075b1f}
[ EventSourceName]
WinMgmt
EventID
10
[ Qualifiers]
49152
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-10-03T05:55:28.000000000Z
EventRecordID
530
Correlation
Execution
[ ProcessID]
0
[ ThreadID]
0
Channel
Application
Computer
Ackdoh-Xeons-PC
Security
EventData
//./root/CIMV2
SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99
0x80041003
and then when I hit close on the dialogue box:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
System
Provider
[ Name]
Microsoft-Windows-WMI
[ Guid]
{1edeee53-0afe-4609-b846-d8c0b2075b1f}
[ EventSourceName]
WinMgmt
EventID
10
[ Qualifiers]
49152
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-10-03T05:55:28.000000000Z
EventRecordID
530
Correlation
Execution
[ ProcessID]
0
[ ThreadID]
0
Channel
Application
Computer
Ackdoh-Xeons-PC
Security
EventData
//./root/CIMV2
SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99
0x80041003
and then when I hit close on the dialogue box:
Faulting application name: Photoshop.exe, version: 12.0.0.0, time stamp: 0x4bbc5b10
Faulting module name: MSVCR90.dll, version: 9.0.30729.4940, time stamp: 0x4ca2e32e
Exception code: 0x40000015
Fault offset: 0x0000000000042686
Faulting process id: 0xbe0
Faulting application start time: 0x01cda12b7a9fe1d4
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Photoshop.exe
Faulting module path: C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4940_none_08e4299fa 83d7e3c\MSVCR90.dll
Report Id: 47fae749-0d20-11e2-b992-10bf480cb285
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-10-03T06:05:08.000000000Z
EventRecordID
538
Channel
Application
Computer
Ackdoh-Xeons-PC
Security
EventData
Photoshop.exe
12.0.0.0
4bbc5b10
MSVCR90.dll
9.0.30729.4940
4ca2e32e
40000015
0000000000042686
be0
01cda12b7a9fe1d4
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Photoshop.exe
C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4940_none_08e4299fa8 3d7e3c\MSVCR90.dll
47fae749-0d20-11e2-b992-10bf480cb285
And then an Information Event Log after that for "Windows Error Reporting"
Fault bucket 28657682, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Photoshop.exe
P2: 12.0.0.0
P3: 4bbc5b10
P4: MSVCR90.dll
P5: 9.0.30729.4940
P6: 4ca2e32e
P7: 40000015
P8: 0000000000042686
P9:
P10:
Attached files:
C:\Users\Ackdoh\AppData\Local\Temp\WERAF51.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Ackdoh\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Photoshop.exe_3 559d21aa493ffb9e1b751cecea2f5e32c54a4_0fe2ba1a
Analysis symbol:
Rechecking for solution: 0
Report Id: 47fae749-0d20-11e2-b992-10bf480cb285
System
Provider
[ Name]
Windows Error Reporting
EventID
1001
[ Qualifiers]
0
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-10-03T06:05:11.000000000Z
EventRecordID
539
Channel
Application
Computer
Ackdoh-Xeons-PC
Security
EventData
28657682
4
APPCRASH
Not available
0
Photoshop.exe
12.0.0.0
4bbc5b10
MSVCR90.dll
9.0.30729.4940
4ca2e32e
40000015
0000000000042686
C:\Users\Ackdoh\AppData\Local\Temp\WERAF51.tmp.WERInternalMetadata.xml
C:\Users\Ackdoh\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Photoshop.exe_3 559d21aa493ffb9e1b751cecea2f5e32c54a4_0fe2ba1a
0
47fae749-0d20-11e2-b992-10bf480cb285
0
Thanks much for checking it out and helping!

The registration shouldn't have anything to do with saving a PDF but I tried that and it didn't work... Thanks for the reply though! This is what's frustrating me so much is that there is seemingly no difference with the software from day to day but, Adobe has simply - "derrrp" - forgotten how to write to PDF and in it's own confusion tells Windows that it needs to shut down. It's also frustrating having to resort to these forums for answers because they're not in real time like a phone call or chat. If I could just talk to someone from Adobe about it, since it is their product, I could have tried that option hours (or days, really) ago and have already gone through a number of other options by now instead of being back at square one..... again.
I mean, for christ sake, I even tried a system restore in case I had mistakenly downloaded a font, brush, etc. that corrupted some files - didn't help anything.

Visual C++ Runtime Library Runtime Error! C:\windows\explorer.exe

Hi,
I have a got crazy problem. Firstly my system specs are,
CPU: AMD A8-6600k
Motherboard: Gigabyte F2A88XM-DS2
Ram : Transcend 4GB. 2GB*2
"This application has requested the Runtime to terminate it in an unusual way.
C:\windows\explorer.exe
Please contact the application's support team for more information."
I have spent two months attempting to find a fix for this error by reading a large number of similar posts and haven't found anything that helps. I have tried everything from editing the registry, installing Microsoft Fix IT apps, to uninstalling all
previous versions of Visual C++ and re-installing the most recent version 2013 also.
I get this error even if I format my system completely and reconfigure it as new system.The error just simply come from no where just pops up as soon I login into my system. Same with both Windows 7 SP1 or Windows 8.1
Please suggest me the solution as I am 100 percent sure, its the problem with Visual C++ only.

The reason could be a some background program.
I suggest you to perform a clean boot for troubleshooting.
http://support2.microsoft.com/kb/331796/en-us

Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
"Connection Error - Failure to get file list from server. An entry with the same key already exists."
I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
Issue Persists....
Thanks in advance,
Justin

Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

When using Live View, site looks great, browser testing goes crazy

I am creating a new website (and I am really unexperienced with Dreamwaver CS5). But when I check my site using "Live View" everything looks great, the way it is supposed to. Then when I go to test it in my browswer (Primary browser is Chrome) it goes crazy: I at first noticed that I had saved one copy as an .asp but then resaved it to .xhtml I did delete the first line of code already that the .asp file created as it kept giving me an error on line 1.
Then I tried to do a spry drop-down menu bar, which I have deleted since I thought I was doing something wrong with that and I should just stick to what I half-way know.
If I were to preview the template page it gives me this error:
This page contains the following errors:
error on line 150 at column 76: error parsing attribute name
Below is a rendering of the page up to the first error.
Here is line 150:
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
If I were to test the index.xhtml page in the browser, it ignores most images (all but one), and the first nav-bar (an editable region) appears to the left instead of under the header. The layout is totally ignored and everything is on the left-hand side of the screen instead of in a two column layout.
I am not testing this on a server just off of my computer.
I am assuming that the error has something to do with the .asp file I first did and when I resaved it, since I don't know what I would be looking for, is still in there screwing it up.
Here is the code from the template page:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Midwest Window Brokers | Page</title>



<style type="text/css">

</style>
<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
</head>
<body onload="MM_preloadImages('/images/home2.jpg')">
<div class="container">
<div class="header"><a href="/index.xhtml"><img src="../images/heading.jpg" alt="Midwest Window Brokers, Windows, Siding, Roofing, 605-791-5352" name="Insert_logo" width="950" height="200" align="right" id="Insert_logo" style="background: #FFFFFF; display:block;" /></a>
    <div id="h-navbar1"><a href="/index.xhtml"><img src="/images/home.jpg" alt="home" width="159" height="51" id="Image1" onmouseover="MM_swapImage('Image1','','/images/home2.jpg',1)" onmouseout="MM_swapImgRestore()" /></a><a href="/windows.html"><img src="/images/services.jpg" width="151" height="51" alt="services" /></a><a href="/freebay.xhtml"><img src="/images/specials.jpg" width="153" height="51" alt="specials" /></a><a href="/gallery.html"><img src="/images/gallery.jpg" width="152" height="51" alt="gallery" /></a><a href="/roofing.xhtml"><img src="/images/order.jpg" width="152" height="51" alt="order" /></a><img src="/images/blank.jpg" width="75" height="51" /><img src="/images/facebook.jpg" width="38" height="51" alt="facebook" longdesc="http://facebook.com/midwestwindowbrokers" /><img src="/images/twitter.jpg" width="37" height="51" alt="twitter" longdesc="http://twitter.com/midwestwindow" /><img src="/images/google.jpg" width="42" height="51" alt="google+" longdesc="http://https://plus.google.com/u/0/b/108071947231835835141/108071947231835835141/posts" /></div>
</div>

<div id="h-navbar">
    <div id="h-navbar2">  Content for id "h-navbar2" Goes Here</div>
</div>

<div class="sidebar1">
    <ul class="nav">
    </ul>
    <p> <div id="wufoo-z7x3k1">
Fill out my <a href="http://midwestwindow.wufoo.com/forms/z7x3k1">online form</a>.
</div>
<script type="text/javascript">var z7x3k1;(function(d, t) {
var s = d.createElement(t), options = {
'userName':'midwestwindow',
'formHash':'z7x3k1',
'autoResize':true,
'height':'601',
'async':true,
'header':'show'};
s.src = ('https:' == d.location.protocol ? 'https://' : 'http://') + 'wufoo.com/scripts/embed/form.js';
s.onload = s.onreadystatechange = function() {
var rs = this.readyState; if (rs) if (rs != 'complete') if (rs != 'loaded') return;
try { z7x3k1 = new WufooForm();z7x3k1.initialize(options);z7x3k1.display(); } catch (e) {}};
var scr = d.getElementsByTagName(t)[0], par = scr.parentNode; par.insertBefore(s, scr);
})(document, 'script');</script></p>
    </div>

<div class="content">
    <h1>Instructions</h1>
    <p>Be aware that the CSS for these layouts is heavily commented. If you do most of your work in Design view, have a peek at the code to get tips on working with the CSS for the fixed layouts. You can remove these comments before you launch your site. To learn more about the techniques used in these CSS Layouts, read this article at Adobe's Developer Center - <a href="http://www.adobe.com/go/adc_css_layouts">http://www.adobe.com/go/adc_css_layouts</a>.</p>
    <h2>Clearing Method</h2>
    <p>Because all the columns are floated, this layout uses a clear:both declaration in the .footer rule. This clearing technique forces the .container to understand where the columns end in order to show any borders or background colors you place on the .container. If your design requires you to remove the .footer from the .container, you'll need to use a different clearing method. The most reliable will be to add a <br class="clearfloat" /> or <div class="clearfloat"></div> after your final floated column (but before the .container closes). This will have the same clearing effect.</p>
    <h3>Logo Replacement</h3>
    <p>An image placeholder was used in this layout in the .header where you'll likely want to place a logo. It is recommended that you remove the placeholder and replace it with your own linked logo. </p>
    <p><span style="font-size: 18px; color: #C00; font-weight: bold; font-style: italic;">Logo Replacement</span></p>
    <p> Be aware that if you use the Property inspector to navigate to your logo image using the SRC field (instead of removing and replacing the placeholder), you should remove the inline background and display properties. These inline styles are only used to make the logo placeholder show up in browsers for demonstration purposes. </p>
    <p>To remove the inline styles, make sure your CSS Styles panel is set to Current. Select the image, and in the Properties pane of the CSS Styles panel, right click and delete the display and background properties. (Of course, you can always go directly into the code and delete the inline styles from the image or placeholder there.)</p>
    <h4>Backgrounds</h4>
    <p>By nature, the background color on any div will only show for the length of the content. This means if you're using a background color or border to create the look of a side column, it won't extend all the way to the footer but will stop when the content ends. If the .content div will always contain more content, you can place a border on the .content div to divide it from the column.</p>
    
</div>

<div class="footer">
    <p class="footer"><strong>  <em>References Available!</em> We accept cash, check, Visa, Discover, MasterCard</strong></p>
      Copyright 2012 Midwest Window Brokers Inc. All Rights Reserved.
    </div>
</div>
</body>
</html>

I had saved one copy as an .asp but then resaved it to .xhtml
I'm assuming this is a static web site. Rename (F2) all your pages with .html or .htm extension.
.xhtml is not a valid extension.
Nancy O.

Visual Voice Mail not working with Telcel

I have 2 cell phones with Telcel in Mexico, one iPhone 4 (company) and an iPhone 5S (personal)
On the company phone, Visual Voice mail works perfectly. But for almost a year I've been trying to get Telcel to fix it on my iPhone 5S with absolutely no success.
They've reset my Voice Mail service on their end several times.
They've told me I'm crazy and that the automated recording I get when pressing on Voice Mail is the correct service.
They've told me they need to take my phone to a service lot and mess with it
They've told me I need to fully reset the phone and delete everything on it for it to work
One Rep even said that I needed the most expensive Premium VIP phone plan for it to work...
It's amazing that the biggest carrier in Mexico has absolutely no training for their reps, or customer care and support technicians regarding iPhones, and scpecifically about this issue...
About a month ago the red indicator for new messages turned on, and I've done EVERYTHING and it still stays on, reset the phone, reset network settings, have the carrier reset the voice mail service, used a carrier provided app to reset the service myself (it does disable an enable), upgraded to iOS 8, setup as a new phone, still the same issue.
Is there something Apple can do to enforce a minimum level of support from their business partners? If Visual Voice Mail did not work on my company phone... I would have no reason to complain, but its amazing that when I show both phones to the technicians with the different VM experience... they look at them like they are Moon Rocks, Asteroids, or a piece of God in my hands... Frustrating not being able to get an answer from the carrier after almost a year...

Well I guess we have to write in english although we are from mexico and speak spanish, so I have the very same problem but mine started not log ago when I upgraded to an iPhone 6 Plus, VVM worked fine then the red bubble appeared in the phone icon, I have gone several times and just like you say the reps know nothing, they have activated over and over, reset VVM, I have turned off and on my phone, actually it's 2 phones we have with the same problem.
I just performed what pakoriv said and at least the red bubble went away but when i tap VVM it still calls *86 in both phones, the second one it's an upgrade from an LG phone so I understand if VMM does't work right away, but the first phone (or line) has been used with iphone since day 1.
I'll let you know if pakoriv method causes another effect later on my phone.

Crazy Matrix Visuals

Similar Messages

Maybe you are looking for