Create an internet link for a PC in an apple environment

I am a complete beginner, bear with me. I have an ibook G4 and a G5 both running Tiger 10.4.2 and linking to the internet via airport extreme. I am trying to link a PC so that it too can access wirelessly through the airport and have the ability to print to 2 printers also in the apple loop. I have set the PC up with wireless 802.11b & 802.11g software but cannot get it to connect. The PC software is asking for a network key but I don't know where this can be found? Additionally do I need to adjust any Apple settings?
Many thanks for any helpful tips!

You may find the guides here useful:
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP1)
http://www.ifelix.co.uk/tech/1010.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html

Similar Messages

  • Creating a Database link for a user

    Hello All,
    I am trying to create a database link for one of my users.
    When I create it as sysdba the link gets created in the SYS schema which tells me that my syntax is working/fine.
    But when I ALTER my SESSION and set my CURRENT_SCHEMA = <USER_NAME> I get ORA-00990: missing or invalid privilege
    So I tried granting the user CREATE DATABASE LINK, CREATE PUBLIC DATABASE LINK, and DROP PUBLIC DATABASE LINK.
    Same error.
    Any ideas what I am missing?
    Thanks,
    Craig

    CraigBoyd wrote:
    Hello All,
    I am trying to create a database link for one of my users.
    When I create it as sysdba the link gets created in the SYS schema which tells me that my syntax is working/fine.
    But when I ALTER my SESSION and set my CURRENT_SCHEMA = <USER_NAME> I get ORA-00990: missing or invalid privilege
    So I tried granting the user CREATE DATABASE LINK, CREATE PUBLIC DATABASE LINK, and DROP PUBLIC DATABASE LINK.
    Same error.
    Any ideas what I am missing?
    Thanks,
    Craigyou need to create a new session after the GRANT was issued.

  • What bluetooth devices may create a internet-brigde for iPad?

    What bluetooth devices may create an internet-bridge for iPad?
    Can't find information in tech specs.
    Is it Apple devices ONLY (iPhones, iPods ...) or it can be other devices like mobile phones or stuff?

    Have a look at this article:
    iOS: System requirements for Personal Hotspot
    Device requirements
    To connect to a Personal Hotspot, your device requires:
    Personal Hotspot using a Wi-Fi connection
    A device with Wi-Fi with support for WPA/WPA2 encryption.
    Personal Hotspot using a USB connection
    Mac running Mac OS X v10.5.8 or later or a PC running Windows XP Service Pack 3 or later, Windows Vista, or Windows 7.
    iTunes 9.2 or later downloaded and installed on your computer.
    Dock Connector to USB cable.
    Personal Hotspot using a Bluetooth connection
    Mac or PC with Bluetooth 2.0 capability and Mac OS X 10.4.11 or later, or Windows XP Service Pack 3 or later, Windows Vista, or Windows 7.
    iPad or iPod touch using iOS 4.3 or later can also connect using a Bluetooth connection. You cannot share a celluar connection using Bluetooth with other iPhone devices.

  • How to create an URL link for product cancellation using an FM

    Hi,
    I have tried creating an external attachment i.e URL link for a workorder by triggering a custom FM by exporting business object type , order id ,realtion type , title and link with return parameter as a message .
    But i'm not being able to create URL link for workorder using the custom FM.
    Kindly please suggest some solutions regarding how the URL link can be created using an FM instead of manual creation.

    given that there can be a variety of reasons for something to crash, you can sometimes initialize a buffer by wiring a non-null data structure to the left terminal of the call library function node. for example, if the output is to be a string no more than 100 characters long, create a string that long of nulls, blanks or anything and attach that to the left terminal for that output. no guarantees, but i have seen that work.
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • What is the Behavior.Navigation URL for creating navigation bar links for search scopes for security group and distribution groups?

    ...the search scope is used to subset the SGs and DGs. The search scope itself shows expected results. The search scope filter used is: /Group[Type='Security' or Type='MailEnabledSecurity'][(Domain = 'DomainX') or (Domain = 'DomainY')]
    Tried the following, with the GUID being the resource ID from the search scope for security groups:
    ~/identitymanagement/aspx/customized/CustomizedObjects.aspx?type=Group&searchtype=e8ed98b6-e299-4b8d-bfe5-e4b2adf1cd60
    ~/IdentityManagement/aspx/groups/Groups.aspx?type=Group&searchtype=e8ed98b6-e299-4b8d-bfe5-e4b2adf1cd60
    Thanks

    are you talking about redirect URL in search scope ? FIM will automatically add the searchtype querystring
    for custom groups search scope you can use :
    ~/IdentityManagement/aspx/groups/AllGroups.aspx
    and configure you search scope to use the same UsageKeywords as for the security groups
    and restart your IIS server using the command "IISRESET"
    in your case if you want to create navigation bar link to your group-type search scope use may use this format:
    http://{your fim server}/IdentityManagement/aspx/groups/AllGroups.aspx?searchtype={your searchscope guid}&content=%2a
    ex : http://fimserver/IdentityManagement/aspx/groups/AllGroups.aspx?searchtype=47e0a973-0ab4-46f5-815f-f5028c1af58e&content=%2a

  • How to create a download link for video file?

    Hello guys,
    I know this is not a question directly related to OS X, but I just can't find a solution. So I was hoping that some of you might know the answer, or could recommend further reading.
    I have .mov video files (video footage) on the server. I would like to make these files accessible for download, via link.
    So I am wondering .... how can I create a link, which would allow people to download .mov video files from the server?
    Thanks for any advice or tip.

    The question is, where is the server?
    Is it on its own static IP? If it is not, it likely is on a DHCP configuration.
    For those with DHCP, I recommend http://www.dyndns.com as a workaround, otherwise the links given will have to change as often as every hour!
    Is it on a router, or does it have a firewall turned on in its sharing preferneces? Routers and firewalls block direct access from the outside. You need to setup the web sharing access on your router or firewall before someone can access it via the web.
    Is the .mov file saved via Quicktime? You would also need to provide link on your page to http://www.apple.com/quicktime so that it may be downloaded by those who don't have it. If it is another format, you'll need a link to whatever format it is.
    HTML for putting the video right on the page is usually controled by the EMBED function. That's covered here:
    http://www.htmlcodetutorial.com/embeddedobjects/_EMBED.html
    Otherwise a simple hyperlink to the file will do, once you have an open web sharing port on a static IP or dyndns controled domain.

  • Crystal report ( how to create a hyper link for the crystal report file)

    hello all,
    how to create a hyperlink for my report file....nd i want it open in excel format.

    Hello Uher,
    sorry for the insufficient details,
    actually we are calling some actuate reports from actuate server, and the URL looks like this
    "https://iconsole.xxx.com/iconsole/viewer/viewreport.jsp?
    outputFileType=XLSX&fromwhere=viewDocument&outputName=
    /filelocation/ReportOutputs/Reportname.xlsx&serverurl
    =http://xx.xxx.com:8010&volume=xxx&userid=xxx&password=xxx"
    which would generate an excel output,
    my question is, can we have some url in which we would specify the output format, as far my research i found  URL reporting
    some thing like this
    "http://" + servername +
    ":8080/OpenDocument/opendoc/openDocument.jsp?outputfiletype=xlsx/
    filelocation/userlogondetails
    but my client needs an excel output, with out going through any web page or viewer controls and generating buttons.
    Thank you

  • Creating PDFs with links for web searches

    Hi everyone. That title is not exactly the problem I'm having, but it's a good start.
    We have found that Firefox/IE/Chrome search our PDFs quite nicely, but when the link is clicked in the search results, all that happens is that the PDF opens to page 1. Users have to search again to find what they're looking for. Perhaps that is just how such a search is supposed to happen, but it seems that I've seen somewhere that a PDF opened to the page with the search term on it.
    What can we add to the FrameMaker source files or the PDF (before it's posted to the web) to ensure that a search link takes the user precisely to the text being searched for? We're TCS3 with unstructured FM but might soon be, um, strongly encouraged to switch to the structured version.
    I've looked through the FM and Acrobat forums for an answer, to no avail.
    Thanks for the help!

    > I wonder whether it's a limitation of the search engine, rather than FM or Acrobat.
    That would be my guess. Search engines probably cannot search many PDFs in the raw at all (you don't have to turn on much security to turn a PDF binary into an encrypted mess). But if the PDF allows reading and/or printing, they can render the whole thing, and index what's displayed. The named destinations may not be recovered in that process, plus, you're not always assured that there will be an ND nearby everything you're indexing.
    Adobe might even provide some APIs that would allow deeper linking into PDFs as a search result, but it may also be that few enough have useful NDs that it just isn't worth the bother to look. NDs inflate the size of the PDF, so many publishers don't turn them on (we don't, and probably won't, until we need deliberate deep linking).
    If you want the info to be accessible like a web page, you multi-flow to HTML or a similar non-atomic format as well.

  • Creating a static link for an hdd in an lvm?

    One of the HDDs in my lvm has its "Advanced power management level" too low. I can't run a script to change it since you know the hdd name changes, and uuid is only for filesystems and not individual hdds.
    Whats a way I can get a static link to the hdd?

    Mr.Elendig wrote:lvinfu/vginfo/pvinfo will tell you what disk the data is on, if that is what you are after.
    I need something I can point hdparm to. I have to manually keep finding if its in /dev/sdb or /dev/sdd from fdisk and then run hdparm myself

  • How to I contact Apple about a support issue with Game Center--itself, directly. I changed my Apple ID and now I cannot access my game center account that I had previously. It created a new one for me with my new apple ID instead of keeping the old one.

    I want to submit an issue with Game Center--itself, directly. I had an account set up that I used to play online games. I changed my appleID and then I no longer could access my game center account. I, apparently, had a new game center account created for me (which is friends with my old account) and now I cannot access my original game center account.
    If I can't get access to email apple directly (which seems ridiculously difficult to do), then someone please tell me how to FIX the issue.
    Thank you

    Yes. I have tried that. When I use the ID I had before, it sets it up as a new account and I don't want to lose my stats attached to my old account.
    Let's say that my old nickname was "user10" and I used the email, "[email protected]" for my apple id. I changed my apple id to "[email protected]" and it changed my game center account to "mynew" and somehow I am friends with my old acct, "user10". I tried getting a password reset for "user10" but I apparently don't know my own birthday, which is possible because I usually give a false one, but the same false one each time.

  • Link for jumping from a JSP Appl. with a button to an external Web-Side

    Hi,
    I'm searching for the solution to create a button where I can jump to an external Web-Side! What I have to do for that in JSF????
    Regards Ingo

    Good to know that you're fine...
    For me all go well too.
    I'm now in charge of loading the datawarehouse on my society...
    And like a lot of others projects come on my hands I have to keep an eye on new technologies (like web service now).
    Still not tested ODI 11g, and I have to say that I'm a bit cold on migrating all my projects on the new version...
    Did you encountered issue when passing form ODI 10 to 11 ?
    I'm a bit curious knowing new features of this first Oracle version....
    Looking forward to reading from you
    Brice

  • How to create a database link to SQL Server from a RAC environment

    We have a 4 node RAC running 11.2.0.3 binaries on 64-bit linux.
    Grid owns the listener named listener.
    Oracle owns the database.

    Thanks all! But I tried to configure and I am getting
    TNS-01201: Listener cannot find executable /u01/app/oracle/product/11.2.0.3/dbhome_1/bin/InfoEdb10 for SID InfoEdb10
    Listener failed to start. See the error message(s) above...
    So! What I did was
    1. Configure the odbc from the OS (only one node) and create the DSN and its odbc files.  connectivity works from Operating Systems.
    2. Create the listener entry (under GRID) user.
    3. Create the remotedb.ora file under $ORACLE_HOME/hs/admin
    --- Here is listener.ora file
    LISTENER_NODE1_TG =
       (DESCRIPTION_LIST =
        (DESCRIPTION =
           (ADDRESS = (PROTOCOL = TCP)(HOST = devrac-a-01-vip.cssd.pitt.edu)(PORT = 1549)(IP = FIRST))
           (ADDRESS = (PROTOCOL = TCP)(HOST = devrac-a-01.cssd.pitt.edu)(PORT = 1549)(IP = FIRST))
    SID_LIST_LISTENER_NODE1_TG =
       (SID_LIST =
           (SID_DESC =
             (SID_NAME = InfoEdb10)
             (ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/dbhome_1)
             (ENVS = "LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0.3/dbhome_1/lib")
             (PROGRAM = InfoEdb10)
    any  help is appreciated

  • How to create odbc (dsn) connection for OBIEE AND INFOR in unix environment

    Hi,
    we are establishing OBIA in Unix environment we set all the things fine but we are getting problem how to create ODBC connection
    for INFORMATICA AND OBIEE. I searched some blogs thats telling there is a ODBC.INI file we need to configure.
    but i am not getting clear idea to give parameters and it will not showing any TNSNAME ..........etc
    please any body give clear idea about how to create ODBC connection and LOCATION of that file AND parameter which i need to give.
    Thanks,
    charan....

    Hi Dpka,
    yah i already checked that one but i have not find out any parameter for TNS NAME information.
    is OBIEE connected to ORACLE DATA BASE without giving TNS information?............in UNIX OPERATING SYSTEM.
    pls give me the clear idea abt how to connect OBIEE, INFORMATICA to ORACLE DATA BASE IN UNIX ENVRNMENT
    thanks,
    charan.

  • Download link for itunes not working on apple website

    I tried to download iTunes from apple webpage. Once I click the DOWNLOAD NOW I get the message of "thank you for downloading iTunes here is this video please learn more" but actually nothing happens. I tried on a different browser but It was the same result. Not possible to sync my iDevices without this software. Suggestions please.

    Use this direct link
    http://www.apple.com/itunes/download/

  • Link for how to kill spindump -- Apple please fix this infuriating software

    People have been complaining about spindump (stuttering audio, spindump taking over the entire processor and thrashing the disk when Leopard thinks a program "is not responding") for well over a year and it seems like Apple has done nothing to mitigate the problems with it.
    While I think I understand the need for spindump (to dump the contents of memory to disk at the moment of the offending program hangs so that it can be used for the crash reporter), the way it's implemented is horrible, and causes wild CPU usage and disk thrashing often when the machine can least afford it -- when a program is being paged in from disk and appears to the system to be hanging.
    I used the method here: http://matthew.kurowski.org/?p=109 to disable spindump, and it is just absolutely amazing how much more responsive my Mac is when it's having to page in huge applications (like Aperture/Photoshop/Illustrator/Dreamweaver) from virtual memory after having swapped them out to disk (which even with 4GB RAM tends to happen often for me because I tend to leave about 20 apps open at once). I now no longer have to look into Activity Monitor to see spindump fighting with all my other apps for processor and disk transfer bandwidth.

    Do you have anything useful to say or just snark? Spindump can be disabled without any negative consequences to the user (and with many reports of hugely positive consequences), and it's new to Leopard so if it can be put in it can be taken back out. Regardless, if your rush to cattiness hadn't gotten in the way, you might have noticed I was actually advocating fixing spindump. I'm not an engineer and I'm not paid to be, I pay Apple huge amounts of money on a near-yearly basis so I can have a computer that doesn't get in my way, and, again, spindump gets in the way at the absolute worst possible moments.
    BTW, I fully believe that many people don't realize that Spindump is choking their systems because it's a problem to track down (you have to have Activity Monitor running when the slowdown occurs because the processor pegging and disk thrashing that spindump causes prevents Activity Monitor from launching until spindump calms down).
    Since it's apparently a better use of your time to snark than search:
    http://discussions.apple.com/message.jspa?messageID=6796856
    http://jamesreubenknowles.com/disable-spindump-71
    http://macosx.com/forums/mac-os-x-system-mac-software/298908-crashreporter-spind ump-leopard.html
    http://macosx.com/forums/archive/t-298908.html
    http://lifestream.gatewayy.net/items/view/875
    http://forum.transmissionbt.com/viewtopic.php?f=4&t=4564&start=240
    http://skwpspace.com/2008/05/20/disabling-spindump-on-osx-to-prevent-slowdown-af ter-a-crash/
    http://www.archivum.info/uk.comp.sys.mac/2008-06/msg01972.html

Maybe you are looking for