Create Boot camp partition on multiple partitions disk without reformatting

Hi everybody,
I am trying to install Windows 7 on a multiple partitions 1TB disk.
Currently I have 2 partitons:
300GB - OS X Lion
700GB - Data
I have read some tips and advices on how to install windows on multiple partitons disks - most of them are invasive (backing up to a removable drive and then reformatting). However, I haven’t found conclusive answer (hence my posting here):
I’m wondering does anybody know in any way - is it possible to do this more painlelssly - to divide second partition (or maybe first) and use that one as a bootcamp target?
Or am I stuck with reformatting to a single partition and then installing from scratch?
Thank you.

No. To use Boot Camp Assistant your drive must start with a single volume encompassing the entire drive - one partition. BCA will then create a second partition for Windows and modify the bootloader so you can select which volume to use for startup - OS X or Windows. BCA can also remove the Windows volume and restore the drive to its original state - single OS X partition.
If you have more than one partition already then BCA cannot modify it. If you have a drive configured with BCA and subsequently add a third partition then BCA is no longer able to manage the drive, and you may no longer be able to boot Windows because of changes made to the bootloader.
So, yes, you are stuck with "reformatting to a single partition and then installing from scratch."
Your alternative is to create however many partitions you want. Install Windows on one of them. Download rEFIt to replace the standard bootloader so you can select between Windows and OS X (or any other OSes you install.)

Similar Messages

OS X Partition split and duplicated when creating Boot Camp partition

Hi,
I have installed a larger internal HD 3TB into my iMac Late 2009 21.5 inch. All went well until I used Boot Camp to set up a Windows partition. My intention to have an OS X partition of 2.8TB and a Boot Camp partition of 200 GB. I am running the latest version of Yosemite.
Once the Boot Camp partition completed, and Windows 7 installed successfully, I have rebooted in OS X to find that the HD is now showing as a Partition of 200GB for Boot Camp, a partition of 2TB for Macintosh HD (with all my applications and data etc), and a second Macintosh HD partition of 800GB, also containing all my applications and data etc which appears to have been duplicated. Prior to completing the Boot Camp process, the internal HD was showing correctly as a single partition of 3TB.
I have completed this process twice, with the same result. After the first occasion, I reformatted the new internal HD and started completely from blank again (as I was unable to erase or change the duplicated partition in Disk Utility).
I used Migration Assistant to transfer my files, data etc from the old Internal HD which is now an external HD.
Any thoughts on what I am doing incorrectly?

This is expected behavior. On your Mac, the 3TB disk is partitioned to allow Windows to function properly in BIOS mode. BIOS mode (and CSM-BIOS, to be precise) has a limitation of a 2TB disk. on a larger disk (including 3TB Fusion drives), the disk is partitioned in such a manner that the Windows adheres to the 2TB limit.
You can can see the exact partitioning, if you are so inclined, using the following Terminal commands.
diskutil list
diskutil cs list
sudo gpt -vv -r show /dev/disk0
sudo fdisk /dev/disk0
The "sudo" commands will prompt for your password, and it will not be echoed back. You may also see a warning about improper use of "sudo" and potential data loss due to "abuse" of the command.

Can't create boot camp partition on new macbook pro

Hi all. Having an odd issue installing boot camp on my 2011 Macbook Pro. When I try and create a partition it gives me the following error message:
"The disk cannot be partitioned because some files cannot be moved."
It goes on to tell me that I need to reformat my drive and try again. Seems a little extreme and even worse, I'm wondering if this will work considering that I still have over 600GB of free space available on my drive. Thought I'd post here and see if anyone has had a similar issue before harassing support.

If you look at the pdf guide in Boot Camp Assistant, step one is to backup. Common sense before altering, installing new OS, and should be required of anyone even if just updating Mac OS.
Now, having fragmented space: Apple never considers defragging free space and says Mac OS X defrags some files, and that having more than 25% free should not impact Mac OS performance.
So I think that covers Apple support for their own OS.
When you install updates, applications and such, the patches are compressed, expanded, space is fragmented, and some vendors often choose to write their updates to the far end of the drive in order to leave high access for other portions.
the best and perhaps only way to move files is to boot from another hard drive, rather than pick yourself up by your own bootstraps and try to shuffle files.
I would never recommend using only built in tools. I don't advise Apple DU First Aid as the sole utility for maintenance and repairs for Mac HFS file system. nor would I use TimeMachine alone. They are free and there and better than nothing.
Create a bootable backup clone of Mac OS for one.
Repair your internal drive.
Try using Boot Camp Assistant; or iDefrag; or Paragon CampTune (yes, it can be used to install Windows partition as well as resize partitions now or later if needed). Does a better job.
The use of x86 Intel cpus opened up new possibilities. Some unintended or not foreseen I guess too. A competition challenge to see who could install Windows on a Mac first and easiest took place in 2006. Apple came in later with their beta. but Boot Camp Assistant has always been a weak, lame, partitioning tool.
Macs and users using gparted and other tools? and try to stop the hand-holding concept? unlikely.
A better tool? there should be, and not only that, it really needs to just be rolled into Disk utilty as one more feature and tab along with other tools - so integrated and if you want to create, resize, remove an MBR slice and Windows partition, you can.
Paragon lets you create a partition, and also they have their own NTFS driver so you don't need to format BOOTCAMP (MSDOS/FAT32) during the install phase later.
Of course installing Windows in a VM doesn't have all the trouble of dual boot native install and given RAM and processor resources, can be more than functional enough for many.
With Windows 7 you can install and have a Windows-only computer, remove all traces of Mac OS (and boot OS X off 2nd drive, either with two SSD + hard drive or eSATA or Intel 'Bolt' interface as well as FW800.

Creating and restoring a Boot Camp partition using Paragon

I am trying to restore a clone of the Boot Camp partition that's on my MacBook Air (Snow Leopard) to My MacBook Pro (Lion).
I was told I could do this without requiring the Windows 7 installation disk by using Paragon Hard Disk Manager.
I downloaded the Paragon Hard Disk Manager on the MacBook Air in the Windows partition and followed the steps the Wizard told me. I chose back up. I successfully backed up the Boot Camp partition but noticed that the amount of disk space on the back up external drive was about 8GB, but the amount used up by Boot Camp was 16 GB.
When I went into the new computer and tried to create a Boot Camp partition, I am not able to do this without installing Windows software.
When I plugged in the external drive which had the back up on it, it just has some files and no Wizard I can use to restore the Windows partition.
So I think I've done it wrongly.
When I first started the wizard, there was a choice of making an image. I did choose this initially and a message came up and said I had done this but there was nothing else - no information about where this image was and what I should do with it. So I chose "Back up" and that is where I am.
Even if I do manage to create an image that contains everything, the operating system and the files, how can I restore that to the newly created Boot Camp partition on the other computer if in order to create the Boot Camp partition I need to install a Windows 7 disk?
It's not that I don't have a valid Windows 7 installation disk, I do but I have to call telephone support to install it because the activation is tied to the first laptop which has issues and needs to be repaired and that's why I am doing the migration of the data. And it's inconvenient to do the telephone thing because it's after hours now and I want to get the clone of the Windows partition before I send off the computer for repairs which I am supposed to do tomorrow morning.
Plus, I am not sure by using the Windows 7 installation disk and migration of data method that I will have the partition looking exactly the same as before, and that's very important for me because I do internet banking with a foreign bank and it took ages for them to set up the internet banking on my computer, and I am worried that internet banking won't work if I do not have an exact clone of the Windows partition.
I can go back again and try making an image disk but I still have the problem of using the Paragon program which is a Windows program on the Mac operating system, which I have to use when I am creating the Windows partition. Is there other software from Paragon that I am supposed to get?

Paragon didn't work for me and their support is quite lousy. I think I just threw $50 away.
I didn't need another activation key to install Windows 7 on the second computer (MBP). The boot camp installation went smoothly. Once in Windows, I downloaded the software again, Paragon Hard Disk Manager, and then chose "restore". It didn't recognize the archive I had made on the external hard drive no matter what I did. I had to give up after a few tries.
So I went to the Paragon website to look for answers in the support section.
They do not respond to emailed support questions for up to three days after you send in the question even if you are a new customer.
I am tempted to ask for a refund because they have false advertising claiming that their product works when it doesn't.
The steps are not that hard to follow if you use their Wizard and the Wizard told me that I had done everything right and that I had created an archive and I named it and everything.
When I went to restore it, nothing. I couldn't even eject the volume. Very strange.
Their FAQ on Support site is unhelpful and full of technical terminology. Nothing pertains to my problem.
I really don't want the headache. Besides if all I wanted was to do a backup I could have used the free back up and restore utility in Windows 7 which is meant to be excellent.
Another Apple Support Discussion member said they had a similar problem, a problem with the archives, and that even after working with Paragon for seven months, it was still not resolved.
After a certain period of time after you've bought the product, you have to pay $50 to get support. It's not worth the bother.
It's a German company and German companies in general are not big into service. I can tell that this is true with this company.
So having been burned, I really do not want to keep going down this path. I really just want my money back.

Boot Camp partition not listed in Windows Setup

I am trying to install Windows 7 with DVD and I used the Boot Camp assistant 5 run in OS X Mavericks (10.9.1). Everything was copied with latest drivers, created Boot Camp partition. After that Mac restarted and booted into the windows installation. I run install process and it says something like: "Any media were not found." No drive found here. So in this stage my install journey ends. If I going back to OS X and check Disk Utility, the Boot Camp partition is there. So I don't understand why the installation can't find any partitions even drives.
any solution for case this ?

you need to install windows support software on a usb 2 flashdrive. more simply, start over in bootcamp, insert your usb drive as well as the dvd, check all 3 options. bootcamp will do the rest.
or it could be a problem with the install disc, why not download win 7 iso from here;
http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/
and go with this, its perfectly legal to use your activation code during instalation.

How do I restore data to a new mac with windows boot camp partition?

Hi
I have a new iMac and an old MBP, I'd like to copy all of the data of my old MBP to the iMac.Would doing that affect the windows boot camp partition?
and how do I do it?
right now im backing everything up on my MBP using super duper
both the MBP and the iMac are running on Lion

I am assuming the Boot Camp partition is on the old MBP and that the SuperDuper clone is on an external drive and is bootable. The Super Duper clone does not include the Boot Camp Partition.
To get the Mac Data moved you can use Migration Assistant and if you want to transfer the Boot Camp partition you would need Winclone to move/copy it to a newly created Boot Camp partition on the iMac. The SD Clone ( and a Winclone backup) is your insurance policy if some kind of difficulty arises.
Links to more detailed info.
http://support.apple.com/kb/HT6025
http://support.apple.com/kb/PH11275
http://pondini.org/OSX/MigrateLion.html
http://twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-winclo ne
http://twocanoes.com/support/winclone/using-sysprep-when-migrating-boot-camp

Increasing Boot Camp Partition Size

How do I increase the boot camp partition size without erasing contents?

Hi and welcome to Discussions,
WinClone http://www.twocanoes.com/winclone/ and a how-to is in their FAQs http://www.twocanoes.com/forums/viewtopic.php?t=515
Paragons CampTune http://www.paragon-software.com/home/camptune/ has worked for some (haven't tried myself, though).
Regards
Stefan

Can you create a boot Camp partition on a Fusion Disk?

Can I install a BootCamp partition on a fusion disc?
Can I install a BootCamp partition (Wndows 7) on a 1 TB on which OSX mac Yosemite or Mavericks has been installed first? I have a 2012 MacBook Pro, that already has a 400 GB Boot Camp partition, but I am considering replacing it with a fusion disc or an SSD since I shall have to install a windows compatible medical dictation application that could use a speedier disc. Will Mac OS and Windows interfere with each other on the SSDpart of a large fusion disc ( 1 TB) if I switch back and forth from rebooting on Mac OS , then on Windows and vice-versa? Does the SSD part of the fusion disc get confused, and will the fusion disc tolerate the installation pf a Boot Camp partition in the first place, or just give a stretch of plain 5400 RPM disc without the SSD part ?Can I

1. On single-disk Macs, you can use an SSHD (as a single physical disk), but not an SSD/HDD. There is a no single physical unit which is a Fusion drive. A Fusion drive consists of a physical SSD and a physical HDD. MBPs on which the Optibay has an SSD/HDD and main bay with SSD/HDD will support a Fusion (aka CoreStorage volume). Yosemite supports a Fusion drive, which has an internal SSD and and external HDD (the reverse makes no sense, but is possible).
2. On newer Macs, with 1TB PCIe flash, you have an SSD as your whole drive.
3. The two environments, OS X and Windows are self-contained, on separate partitions. The underlying hardware is common.
4. On a Mini, which supports two drives, I have a 256g SSD/1TB HDD, in a DIY Fusion drive, with Windows on the SSD part. Bootcamp Assistant does not support this, but third-party tools can be used. The other option is to install OS X and Windows on a SSD, and later add an HDD and include into a CS volume. This is what I would recommend for you.
5. The 13-in 2012 MBP will allow you use a USB installer, without the need for an Optical drive, so it is possible to replace the Optibay with an HDD, create a Fusion drive. If BCA is used, it will put Windows on the HDD on this specific machine if the Fusion drive is created first.

How do I create a Boot Camp partition with Windows & blank NTFS partitions?

I'm trying to create this kind of setup:
OS X partition
Windows 7 partition
blank NTFS partition (no OS)
blank NTFS partition (no OS)
This would be much easier if I created just the OS X partition and the Windows 7 partition with the Boot Camp Assistant tool (done this many times before successfully on other computers). The problem begins when I try to split the Boot Camp partition through the Windows 7 DVD partition manager during setup by deleting the Boot Camp partition, and recreating three partitions from the unallocated space. After installing Windows 7 on one of those new three partitions, I'm getting all kinds of startup errors when I try to install the Boot Camp drivers.
What would the best way to achieve this setup?

Yes, I researched many options for three partition dual boot set ups. After many trials and tribulations, there is a simple method that I have used on multiple MBPs.
1. Run Boot Camp Assistant, as per the Boot Camp Installation and Setup Guide. Once you have Mac OS X and Windows 7 set up, check the partitions and back them up (with Time Machine, and Winclone).
2. Get iPartition, and resize the Mac and Windows partitions to what you want, say 100GB each, and set up your other partitions to the size you want. I put mine "after" the Windows partition, at the end of the disk, and have had no problems. It takes a few minutes to create the bootable CD for iPartition, but you get everything you need to do so from Coriolis Systems. You will need your Mac OS X installl disc.
3. Install Paragon's HFS+ for Windows and NTFS for Mac, and everybody can read and write everything.
4. I have both Time Machine and Norton 360 back up the Data partitions, just in case -- to an external drive, of course.
You can boot to either OS and access any partition.

Help: Windows XP on MacBook Pro Boot Camp Partition via Target Disk Mode

Firstly, let me lay out my situation. I have an old MacBook Pro (2,2) with a broken disk drive. It was dropped in its youth and can no longer read from or write to CDs or DVDs of any kind. I have just recently bought a new MacBook Pro to replace it (6,2) and am currently trying to convert the old computer into an XP machine through Boot Camp. I'd like to be able to do so without having to buy an external disk drive.
After a clean install of OS X (10.6.3) onto the old machine, I successfully partition 85GB of space (although I previously attempted the same with a 32GB file system to no avail as well) for XP to be installed upon. Because I cannot boot my XP install disk directly from the broken disk drive, I then close Boot Camp Assistant and shut down the computer. I start it up in Target Disk Mode to be accessed from the new MacBook (6,2).
Once the old MacBook is connected, I insert my XP install disk into the new MacBook (6,2) and boot from the disk. After allowing the XP (Professional) boot to load the install files, I arrow-key down to my 85GB partition (FAT32, named standard as "BOOTCAMP") on the old MacBook (2,2)'s hard drive and select it as the partition I would like to install to. This is where I am directed to a new boot window that tells me in a series of paragraphs that the XP installer cannot reach the selected partition for what seems to be a number of reasons. What it seems to be trying to say to me is that it cannot do a remote install of XP on a Target Disk Mode-connected machine, while not "knowing" that I am trying to do so. It's a similar message to the one that Boot Camp Assistant shows when one tries to create a Boot Camp partition on a machine that is being accessed via Target Disk Mode (Apple puts it much more clearly than Microsoft).
I'd be perfectly content, albiet slightly vexed, to conclude here that it is not possible, shuttle over to the nearest Best Buy, and purchase an external disk drive if it weren't for one thing: I tried the same thing two weeks ago with Ubuntu 10.10 and it installed perfectly on the Boot Camp partition I had created then (I have since wiped all and installed OS X cleanly on the laptop).
Here comes the point/questions:
If the Ubuntu boot disk can access the partition, why can't the XP boot disk?
Is there some way to convince the boot system that the drive is local, rather than being accessed via Target Disk Mode?
Is there an easy solution that doesn't even require that, and will allow me to install to the disk over a firewire connection?
If anyone's knowledgeable and/or brave enough to tackle this one, I'll be eternally grateful. Heck, I'll be grateful if anyone even attempts to tackle it.
Thanks,
-Alec Page

Windows XP will only install from the optical drive. Target Disk Mode does not work with Windows volumes. Windows will not install from any external device.

Help-Erasing a Boot Camp Partition Caused 32 GB of Disk Space to Vanish

Hi
I'm a new mac user I'd I have been really happy so far, expect for this problem:
-I created a 32 gb partition with boot camp.
-I tried installing windows xp without knowing I had to format the system to NTFS during the install
The installation didnt work, and I erased the bootcamp partition.
-When I tried to create a new boot camp partition, it said my Mac HD size hard drive is 227 gb, ie the *32 gb allocated to the partition had vanished*. In addition, I could not recreate a partition because of an error message.
-I ran the snow leopard CD's disk utility and thought that I had fixed the problem.
-However in boot camp, the mac drive is still only 227 gb (missing 32 gb). I can create partitions now, and deleting these partitions does cause any additional loss of disk space.
-I tried erasing empty disk space with no luck.
Does anyone know how to recover space lost by Boot Camp?
Thanks

qcpharaoh wrote:
-When I tried to create a new boot camp partition, it said my Mac HD size hard drive is 227 gb, ie the *32 gb allocated to the partition had vanished*. In addition, I could not recreate a partition because of an error message.
-I ran the snow leopard CD's disk utility and thought that I had fixed the problem.
-However in boot camp, the mac drive is still only 227 gb (missing 32 gb). I can create partitions now, and deleting these partitions does cause any additional loss of disk space.
Let me ask a simple question. What size HD do you have in your Mac? You say you see 227 GB and that 32GB is "missing". If I add those two numbers up I com up with 259 GB. I suspect that your "missing" space is due to the inconsistencies in which Snow Leopard now reports 1 GB. In some places it reports 1 GB as a hard disk manufacturer (1 GB = 1,000,000,000 bytes). In other places it reports 1 GB as a binary number (1 GB = 2^^30 [IIRC] = 1,073,741,824 Bytes). Since I do not know of any drive manufacturer that sells a 259 GB drive, I suspect that this is just due to the differing definitions of 1 GB.

Copying a disk which has a boot camp partition

Colleague has an iMac with a boot camp partition, and the disk has failed. It won't boot off the mac partition, although the windows partition works fine. He bought a new 1T disk and we are trying to copy his disk on to it, and will then install the new disk into the iMac.
So it's booted up using the SnowLeopard install disk and I am running disk utility. First I tried to partition the disk into something that looks like the partition scheme on the current disk -- big partition for os x, little partition for windows, although big & little are 750GB vs 250GB as opposed to the smaller version on the 260GB original.
Then I tried to use the Restore to go from the old bootcamp partition to the new MS-DOS (fat) partition on the new drive. This failed. First it resized the fat partition down to an ever-so-slightly smaller partition than the NTFS original, and then generated an error because the partition is too small.
How do we do this?

Loner T wrote:
1. Do you have a TM backup of the OSX which came from this "failed" disk? It may just be a matter of reinstalling OSX too work around bacd blocks?
My boss tried that about a year ago, but it failed again after not too long.
2. What is the failure when switching to OSX from Windows?
Not sure. Now when I option-boot the machine I can't see either partition -- I can see the installer dvd and the new drive in its external enclosure.
3. Windows can be installed only on the internal disk, which is a Windows restriction that BC enforces. Apple allows OS to installed on external drives. Ask Gates/Ballmer/Nadella why?
4. Yes, you can get data of the disk, not matter how it is connected, internal or external. It is tricky to take a Volume and move it. Can I suggest an investment in Winclone to backup and restore (http://www.twocanoes.com/products/mac/winclone) Windows?
5. Yes, but I would recommend putting Bootcamp Windows back as BC/Windows, rather than virtualizing it using Parallels.
Well moving the new disk in to the iMac is one of the tasks we need to accomplish, so we can do it now. My plan was to use dd to move the data from the partition on the old drive to the partition on the new drive, once we can get Boot Camp Assistant to create it. Winclone looks like a great product, but it's $29. Parallels is only $79, and if a disk fails or you migrate to new hardware all of the Parallels vms come over effortlessly using Setup Assistant or Migration Assistant.

Can I delete the mac partition used to create the boot camp partition?

I am using Mac OS 10.9.5 on a late 2011 17" Macbook Pro.
I currently have an SSD in the primary drive slot with my primary Mac partition and an HDD in the Superdrive slot that has one unused Mac partition that I would like to delete and a Windows 8 partition that I would like to keep.
Can I delete the extra Mac partition on the HDD so I can use that as spare space? It was the Mac partition that was used to run Boot Camp and create the Windows 8 partition that is on the same drive so I am nervous that the Windows 8 partition needs to rely on that Mac partition to work for whatever reasons.
I recently went through a huge ordeal to create a Windows 8 Boot Camp partition as I wanted it on my computer. I had previously taken out the Superdrive and replaced it with a data doubler and the original hdd, and I had an aftermarket SSD in the primary drive bay. I had been using the SSD as my Mac partition and the HDD as spare storage space. For my Boot Camp config, I wanted to split the HDD into 2 partitions and make one Windows 8 and the other spare storage space while keeping the SSD dedicated to my Mac partition. Achieving that required removing the SSD, removing the data doubler, reinstalling the Superdrive, putting the original HDD back in the primary drive slot, installing and updating Mac OS on the HDD, using that Mac install to run Boot Camp and create a second partition for Windows 8, installing Windows from the Superdrive, and then putting everything back by taking out the Superdrive, putting the HDD back in the data doubler, and putting the SSD back in. Everything works now. Understandably I don't want to break anything and have to redo this process.
That said I do want to delete that extra Mac partition and use it as extra storage, if I can do so without breaking the Boot Camp Windows 8 partition.

ilovemac wrote:
Use Disk Utility and remove the "BOOTCAMP" partition. Then make "Macintosh HD" all the way to the bottom to regain space.
Wrong advice. Do not use Disk Utility. Use Bootcamp Assistant to remove the Bootcamp partition and return the drive to a single OSx partition. Using Disk Utility will result in lost space, lost data, and possibly an unusable OSx partition. Read the Bootcamp help and user guides.

Why is Winclone Needed? Can't Disk Utility Restore a Boot Camp Partition?

Hi. Could we just use Disk Utility to create a backup the Boot Camp Partition running Windows 7 64-bit for example and then just use Disk Utility to restore it if you need to replace your Boot Camp partition?
Why is Winclone the tool use to create an image of Boot Camp partition as well as to restore a Boot Camp partition? Thank you in advance.
Gbu.

Thanks for the reply. How about if you opt for the non compressed image, the DVD/CD Master option (Image Format) when you do the New Image in Disk Utility? Would choosing the DVD/CD Master option be cloning it instead of archiving it? If the images created by Disk Utility are not the exact copy or clone then, it won't be bootable I believe but how come when you create an image of a DVD (to back it up for example) and burn that image, it is bootable which mean it copies it exactly (clone it in effect)?
What does WinClone do or copy exactly that Disk Utility can't?

Boot Camp partition not showing in startup disk or when holding alt key

I've read countless discussions about similar questions to this one, however, I still haven't been able to find any solution.
I have an old 2006 MacBook that has just been fully updated and reformatted. I'm running OSX 10.7.5 and Boot Camp 4.
I went through the Boot Camp installation from an Windows ISO image in my usb drive, where it succesfully downloaded all files needed, and prompted me to make the partition, after which it restarted and was supposed to take me to the installation manager in the Windows partition. I first got the "No bootable driver" error, to which I read I was supposed to restart the computer, hold the alt key, and choose the boot camp partition. However, it does not show up. I only get Mac and Recover drivers.
I went into the Mac's startup disk, and only the Mac driver is showing, no Boot Camp driver, however, when I go into Disk Utilities, I can see that the BootCamp driver there.
I read somewhere that I should zap pram and reset SMC, which I did with their instructions. It didn't change anything, I still only get the Mac driver and Recovery when hitting the alt key.
Does it have something to do with my MacBook being older? That's the only reason I can think that would not allow me to do this.
Let me know what other info I can give you so that you can please help me!! Thanks in advance!

In last resort I solved my missing BOOTCAMP partition problem using a program called: iPartition from coriolis systems located in the United Kingdom http://www.coriolis-systems.com/iPartition.php it took me a coupleof days to figure out the credit card system they have Hint: use your 9 digit zip code to find your credit card address and call your bank if you have an overseas hold on the card!!!! The program found my missing BOOTCAMP partition and restored it. It did take a couple of e-mails to learn to use their program. Let me know how you turn out!

Create Boot camp partition on multiple partitions disk without reformatting

Similar Messages

Maybe you are looking for