Create database using mxmc-install.cmd + installing identity management

Hi all,
We planned to install a identity management on a existing bi sever as a separate instance.I got the installation documents in service market place.
https://websmp110.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000706149&
I started installing the database using the document
"Installing the Identity Center Database on Oracle".
I executed mxmc-install.cmd/mxmc-install.sh file .It is asking for the net service name.
"Enter Net service name (if remote database): "
What value should i provide here?
Since the database for IDM is not yet created , we thought that the script will create the database for the IDM. So we decided to give
sid for IDM as c24 and entered the passwords for user id like system etc. But at the end it came up with an error
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified"
This error comes when the database entries are not there in tnsnames.ora and listners.ora. But we have not yet created the database and we were try to create a new database.
So seeing this, does we need to manually create a new database
with DBSID c24 and then execute the script?
Does we need to do anything else before using the script mxmc-install.cmd ?.
Please shed some light into the issue.
thanx and regards,
Rajesh

Hi Rajesh
You need to install a new database using net configuration assistant.
Please refer this link Re: issue with Oracle install in IC
Thank you.

Similar Messages

9.0.1 create database using dbca fails

Solaris 8, 64-bit SPARC, 528mb RAM, 2 SCSI 9gig. Development box with no other users/processes running except Sendmail.
Installed Oracle 9.0.1 on machine from CDs with no problems, Attempting to create database using Database Configuration Assistant.
Creating 'general purpose' database using dbca with generally default parameters. Progress bar gets to 50% done, "creating & starting instance" is checked in progress window.
CPU utilization goes to 100% and nothing happens for hours. Eventually have to cancel dbca. No control files or init.ora created, (pfile directory is empty) there are a bunch of oracle processes left running which have to be killed.
I've tried this several times, moved stuff to different drives and/or filesystems, no luck. Have 5 gig available on /u01 where the database should install, and 8 gig available on /u02 where the .dbf's go.
If I had any hair left, I'd pull it out. Any help would be greatly appreciated.
Thanks in advance!

I am getting this same problem: The DBCA gets to the point where it is installing the database and starting the instance (it says 51% of the way through), and then it just sits there doing nothing. I noticed when I installed Oracle (9.2.0) when it got to the point of the configuration assistants, there was mention of a listener not being able to start and the installer assuming it was already started (the listener that is). When the DBCA started right after, it stalled out at 51%.
I aleady had the Sun JDK installed, but am assuming this is not the issue since the install got that far. Can someone please advise a course of action so that I can trouble shoot this? I am very very new to this side of Oracle. Any assistance is greatly appreciated and will be passed along to others in turn.
Thanks,
BillR

How to create database using shell script

hai
how to create database using shell script

The documentation details the steps to create a database manually. Another option is to use DBCA to create the scripts. DBCA will give you a complete set of scripts that will create a database.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#sthref220

How to get the user created when I prepare for the BD Identity Manager

Hi I have a query, I need to get a backup database Identity Manager 9.1, I have a problem I do not remember user created to perform the backup, how can you know that I created when I made the installation of Identity Manager, or how can I find

Hi,
You can do this trick:
1) Go to "Deployment Manager" in the Web Console, and open the EXPORT applet
2) Export the User Defined Fields from the USR form. You don't need any dependence for this.
3) Open the generated XML with a text editor.
3) Search for the <SDK_SCHEMA> tag
This tag contains the OIM schema name, wich shoud be your OIM database user.
Hope it helps,

Can't create database using ASM (SOLVED)

Hi all
I'm trying to use ASM for the first time, on Oracle 10.2.0.1 on Solaris x64.
I have installed the ASM instance into /opt/oracle/asm/10.2.0 and created disk groups. I have cssd running OK. I am able to start and stop the ASM instance without problems, and I can select from v$asm_diskgroup to confirm that disks are mounted OK.
I have then installed Oracle EE separately into /opt/oracle/server/10.2.0. I first did a software only install, and now I am trying to create a DB.
The problems come when I try to use this ASM instance to host a new database. I first tried to use DBCA to create a new database, but on database creation I got the following errors:
ORA-00200: control file could not be created
ORA-00202: control file: '+DBLIVE1'
ORA-17502: ksfdcre:4 Failed to create file +DBLIVE1
ORA-15001: diskgroup "DBLIVE1" does not exist or is not mounted
ORA-15055: Message 15055 not found; No message file for product=RDBMS, facility=ORA
ORA-01031: insufficient privileges
I then told DBCA just to create the DB creation scripts, and I tried manually running these with SQL*Plus.
When doing it with SQL*PLus, I initially got the same error as shown above. But then something changed (sorry, not sure what), and now the error I get is:
CREATE DATABASE "NEONREL1"
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00349: failure obtaining block size for '+DBLIVE1'
ORA-01031: insufficient privileges
I've put some debug info below, showing me succesfully connecting to the ASM instance and then attempting to create the DB using the db creation scripts, showing the error at the end. You can see that the oracle OS user is able to connect fine to ASM, then I swithc ORACLE_SID and ORACLE_HOME to the EE install and try to create the DB, at which point it apparently can't connect to ASM any more.
I've tried the DB creation many times, and in between attempts I completely empty $ORACLE_HOME/admin/<dbname> and delete the files related to the attempted install from $ORACLE_HOME/dbs/ . I've also stopping/starting ASM, rebooting, and I've done the install of ASM and EE a couple of times over in case I made any mistakes in my earlier attempts.
Any help would be much appreciated!
Tom
##### CHECKING ASM
oracle@neonrcom-db1:~$ uname -a
SunOS neonrcom-db1 5.10 Generic_127128-11 i86pc i386 i86pc
# css is running
oracle@neonrcom-db1:~$ ps -ef | grep css
oracle 498 1 0 21:46:40 ? 0:01 /opt/oracle/asm/10.2.0/bin/ocssd.bin
# listener is running in the ASM instance
oracle@neonrcom-db1:~$ ps -ef | grep tnsl
oracle 1332 1 0 21:49:59 ? 0:00 /opt/oracle/asm/10.2.0/bin/tnslsnr LISTENER -inherit
# ASM is only entry in /var/opt/oracle/oratab
oracle@neonrcom-db1:~$ grep -v "^#" /var/opt/oracle/oratab
+ASM:/opt/oracle/asm/10.2.0:N
# I can connect to ASM fine, and it has diskgroups mounted.
oracle@neonrcom-db1:~$ export ORACLE_HOME=/opt/oracle/asm/10.2.0
oracle@neonrcom-db1:~$ export ORACLE_SID='+ASM'
oracle@neonrcom-db1:~$ sqlplus "sys as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 21 20:53:10 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> set line 150
SQL> select name, block_size, state, type, total_mb, free_mb from v$asm_diskgroup;
NAME BLOCK_SIZE STATE TYPE TOTAL_MB FREE_MB
DBARCH1 4096 MOUNTED EXTERN 2096856 2096784
DBLIVE1 4096 MOUNTED EXTERN 4193904 4193812
#### Contents of init.ora for new DB
db_create_file_dest=+DBLIVE1
db_recovery_file_dest=+DBARCH1
db_recovery_file_dest_size=2147483648
##### DB INSTALLATION ATTEMPT
oracle@neonrcom-db1:~$ export ORACLE_HOME=/opt/oracle/server/10.2.0
oracle@neonrcom-db1:~$ export ORACLE_SID='NEONREL1'
oracle@neonrcom-db1:~$ export PATH=$ORACLE_HOME/bin:$PATH
oracle@neonrcom-db1:~$ /opt/oracle/server/10.2.0/admin/NEONREL1/scripts/NEONREL1.sh
You should Add this entry in the /var/opt/oracle/oratab: NEONREL1:/opt/oracle/server/10.2.0:Y
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 21 22:10:54 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
specify a password for sys as parameter 1
Enter value for 1: xxx
specify a password for system as parameter 2
Enter value for 2: xxx
specify a password for sysman as parameter 3
Enter value for 3: xxx
specify a password for dbsnmp as parameter 4
Enter value for 4: xxx
specify ASM SYS user password as parameter 6
Enter value for 6: xxx
Connected to an idle instance.
SQL> spool /opt/oracle/server/10.2.0/admin/NEONREL1/scripts/CreateDB.log
SQL> startup nomount pfile="/opt/oracle/server/10.2.0/admin/NEONREL1/scripts/init.ora";
ORACLE instance started.
Total System Global Area 1.9294E+10 bytes
Fixed Size 2054976 bytes
Variable Size 2264925376 bytes
Database Buffers 1.7012E+10 bytes
Redo Buffers 14721024 bytes
SQL> CREATE DATABASE "NEONREL1"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
8 EXTENT MANAGEMENT LOCAL
9 SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
10 SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
11 SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
12 CHARACTER SET AL32UTF8
13 NATIONAL CHARACTER SET UTF8
14 LOGFILE GROUP 1 SIZE 51200K,
15 GROUP 2 SIZE 51200K,
16 GROUP 3 SIZE 51200K
17 USER SYS IDENTIFIED BY "&&sysPassword" USER SYSTEM IDENTIFIED BY "&&systemPassword";
CREATE DATABASE "NEONREL1"
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00349: failure obtaining block size for '+DBLIVE1'
ORA-01031: insufficient privileges
Message was edited by:
tjobbins

Update: I've worked out the difference between the two sets of errors I get.
The basic error is this:
ORA-00200: control file could not be created
ORA-00202: control file: '+DBLIVE1'
ORA-17502: ksfdcre:4 Failed to create file +DBLIVE1
ORA-15001: diskgroup "DBLIVE1" does not exist or is not mounted
ORA-15055: Message 15055 not found; No message file for product=RDBMS, facility=ORA
ORA-01031: insufficient privileges
However if my init.ora contains the line:
control_files=/opt/oracle/server/10.2.0/dbs/cntrlNEONREL1.dbf
then I instead get the second error:
CREATE DATABASE "NEONREL1"
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00349: failure obtaining block size for '+DBLIVE1'
ORA-01031: insufficient privileges
So basically these must be the same error, just in the second case I'm not trying to put the control file on the ASM so it fails at a different point.
But both errors must be because of the same cause, I suppose.

Can use ASM only when creating database using dbca

I have a problem. When i create a database using DBCA, i can only use ASM as the file sytem. why ?
i just installed the 10gR2 with cluster and donno why i cannot use ocfs.
Thanks.

What were your reasons with going with OCFS rather than ASM?
Thanks.

Creating database using command in SQL*plus

Hi,
Its not an urgent question.
I'm learning Oracle DBA. I have installed Oracle 9.2 in my windows system. And I am trying to create a database using SQL command.
OracleVersion : 9.2
Operating System Windows XP
CREATE DATABASE suri
USER SYS identified by manager
USER system identified by surendra
LOGFILE GROUP 1 ('F:\Oracle\oradata\suri\redo01.log') SIZE 100M,
        GROUP 2 ('F:\Oracle\oradata\suri\redo02.log') SIZE 100M,
        GROUP 3 ('F:\Oracle\oradata\suri\redo03.log') SIZE 100M
   MAXLOGFILES 5
   MAXLOGMEMBERS 5
   MAXLOGHISTORY 1
   MAXDATAFILES 100
   MAXINSTANCES 1
   CHARACTER SET US7ASCII
   NATIONAL CHARACTER SET AL16UTF16
DATAFILE 'F:\Oracle\oradata\suri\system01.dbf' size 200M EXTENT MANAGEMENT LOCAL
UNDO tablespace undots datafile 'F:\Oracle\oradata\suri\undots01.dbf' size 200M
DEFAULT TEMPORARY TABLESPACE tempts1 DATAFILE 'F:\Oracle\oradata\suri\temp01.dbf' SIZE 100M EXTENT MANAGEMENT LOCAL
I'm getting error like below while executing the CREATE DATABASE command.
ERROR at line 16:
ORA-25139: invalid option for CREATE TEMPORARY TABLESPACEI have validated the syntax but not able to find where the error is.
Please let me know if you need any further details.
Thanks in advance for your help.
Regards,
Suri

Welcome.
why I got error when I use DATAFILE in CREATE DATABASE command (In oracle documentation also it shows as DATAFILE only)See http://download.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_55a.htm#2127439
Also, error description may be helpful...

Listener pre-requisite for create database using dbca

Hello All:
Oracle binaries successfully installed using dbca (Advanced Installation, Custom, Install DB software only)
Now when i use dbca to create a database, i have noticed one of the screen prompts me to "Select the listeners for which you want to register the database".
Question:
Do we have to create the listener before we create the database so we can register the database.
Is this a standard step asking us to register the database with the listener or we can get along with the create database without having to create the listener ahead of the database creation.
Is this step asked because of the type of install i choose earlier for binaries using dbca (Advanced Installation, Custom, Install DB software only)
Thanks
San~

sannidhi wrote:
The screen doesn't let me go on to the other screen without making a selection. That is the reason i was wondering if it has been tied up the the install options you choose when you install software only.
Thanks
San~I don't have dbca in front of me at the moment, but does it present you with a list from which to choose? If so, is one of the choices 'listener' or 'default'? If so, choose one of those.

Creating database using DBCA stuck at 85% for about 7minutes~

when i create DB using DBCA , it stuck in 85% for a long time ,and the a waring appears
it says :
EM configuration failed due to the following error
-error starting database control
refer to the log file at emConfig.log for more details
so i checked the log file,and i find this:
Mar 10, 2009 5:02:50 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /u01/app/oracle/oracle/product/10.2.0/db_1/bin/emctl start dbconsole
Mar 10, 2009 5:09:56 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 1
Mar 10, 2009 5:09:56 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://myoracle.localhost.com:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ............................................................................
................. failed.
starting emctl dbconsole takes about 7 minutes. and it still failed
some guy say it might a bug ,and can fix it using a patch.
in order to use the patch wizard ,i must login to the em. but i cant open it. and also , i dont have metalink account.
also ,there is another error , when i use emctl start dbconsole ,
it says an instance fo oem 10g Database Control is already running
then i use emctl status dbconsole
but it says EM daemon is not running .
my os is RHEL 5.3
and oracle version is Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
so i was totally confused....
so ~ if possible give me a reply~ really appreciate~

hello,
You can just create database without EM dbconsole and later you can create EM repository manually. Now if you have already configured it and you don't want to repeat the process then you can do this
To Create
$ emca -config dbcontrol db -repos create
To drop
$ emca -deconfig dbcontrol db -repos drop
To recreate
$ emca -config dbcontrol db -repos recreateRegards
Edited by: OrionNet on Mar 12, 2009 9:48 AM

Problem in create database use dbca in RAC

i setup a two-nodes RAC, and use dbca to create db
here is the output of dbca
[oracle@rac1 ~]$ dbca -silent -responseFile /home/oracle/dbca.rsp
Copying database files
1% complete
3% complete
9% complete
15% complete
21% complete
27% complete
30% complete
Creating and starting Oracle instance
32% complete
36% complete
40% complete
44% complete
45% complete
48% complete
50% complete
Creating cluster database views
52% complete
70% complete
Completing Database Creation
73% complete
76% complete
79% complete
80% complete
81% complete
90% complete
99% complete
100% complete
Look at the log file "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb/mydb.log" for further details.
and here is the log output:
Failed to retrieve network listener resources required for the Real Application Clusters high
availability extensions configurations on the following nodes: [rac1, rac2].
Do you want listeners on port 1521 with prefix LISTENER to be created on nodes [rac1, rac2]
automatically? If you would like to configure the listener with different properties, run NetCA
before continuing.
PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [CRS-0215: Could not start
resource 'ora.rac1.ASM1.asm'.]
PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [CRS-0215: Could not start
resource 'ora.rac2.ASM2.asm'.]
Could not mount the diskgroup on node: rac2. The ASM instance on node rac2 is not started.
Could not mount the diskgroup on node: rac2. The ASM instance on node rac2 is not started.
Copying database files
DBCA_PROGRESS : 1%
DBCA_PROGRESS : 3%
DBCA_PROGRESS : 9%
DBCA_PROGRESS : 15%
DBCA_PROGRESS : 21%
DBCA_PROGRESS : 27%
DBCA_PROGRESS : 30%
Creating and starting Oracle instance
DBCA_PROGRESS : 32%
DBCA_PROGRESS : 36%
DBCA_PROGRESS : 40%
DBCA_PROGRESS : 44%
DBCA_PROGRESS : 45%
DBCA_PROGRESS : 48%
DBCA_PROGRESS : 50%
Creating cluster database views
DBCA_PROGRESS : 52%
DBCA_PROGRESS : 70%
Completing Database Creation
Failed to start listeners on nodes "[rac1, rac2]" of cluster database "mydb", "CRS-1028: Dependency
analysis failed because of:
CRS-0223: Resource 'ora.rac2.LISTENER_RAC2.lsnr' has placement error.".
DBCA_PROGRESS : 73%
DBCA_PROGRESS : 76%
DBCA_PROGRESS : 79%
ORA-01078: failure in processing system parameters
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+ORADG/mydb/spfilemydb.ora'
ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-15056: additional error message
ORA-17503: ksfdopn:DGOpenFile05 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-15173: entry 'spfilemydb.ora' does not exist in directory 'mydb'
ORA-06512: at line 4
ORA-01034: ORACLE not available
DBCA_PROGRESS : 80%
ORA-01034: ORACLE not available
ORA-01034: ORACLE not available
ORA-01034: ORACLE not available
DBCA_PROGRESS : 81%
ORA-01034: ORACLE not available
DBCA_PROGRESS : 90%
Enterprise manager configuration failed due to the following error -
Invalid username/password.
Refer to the log file at /opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb/emConfig.log for more
details.
You can retry configuring this database with Enterprise Manager later by manually running
/opt/ora/product/10.2.0/db_1/bin/emca script.
DBCA_PROGRESS : 99%
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
PRKP-1001 : Error starting instance mydb1 on node rac1
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.mydb.mydb1.inst' has placement error.
PRKP-1001 : Error starting instance mydb2 on node rac2
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.mydb.mydb2.inst' has placement error.
DBCA_PROGRESS : 100%
Database creation complete. Check the logfiles at
/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb for details.
Database Information:
Global Database Name:mydb
System Identifier(SID) Prefix:mydb
it should be run netca　before running dbca?

this time i run netca first,and then run dbca to configure the ASM,after that i run dbca to create database
listener and asm instance is online,but when i create DB ,still have error
Copying database files
DBCA_PROGRESS : 1%
DBCA_PROGRESS : 3%
DBCA_PROGRESS : 9%
DBCA_PROGRESS : 15%
DBCA_PROGRESS : 21%
DBCA_PROGRESS : 27%
DBCA_PROGRESS : 30%
Creating and starting Oracle instance
DBCA_PROGRESS : 32%
DBCA_PROGRESS : 36%
DBCA_PROGRESS : 40%
DBCA_PROGRESS : 44%
DBCA_PROGRESS : 45%
DBCA_PROGRESS : 48%
DBCA_PROGRESS : 50%
Creating cluster database views
DBCA_PROGRESS : 52%
DBCA_PROGRESS : 70%
Completing Database Creation
DBCA_PROGRESS : 73%
DBCA_PROGRESS : 76%
DBCA_PROGRESS : 79%
ORA-01078: failure in processing system parameters
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+ORADG/mydb/spfilemydb.ora'
ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-15056: additional error message
ORA-17503: ksfdopn:DGOpenFile05 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
ORA-15173: entry 'spfilemydb.ora' does not exist in directory 'mydb'
ORA-06512: at line 4
ORA-01034: ORACLE not available
DBCA_PROGRESS : 80%
ORA-01034: ORACLE not available
ORA-01034: ORACLE not available
DBCA_PROGRESS : 89%
DBCA_PROGRESS : 98%
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
PRKP-1001 : Error starting instance mydb1 on node rac1
CRS-0215: Could not start resource 'ora.mydb.mydb1.inst'.
PRKP-1001 : Error starting instance mydb2 on node rac2
CRS-0215: Could not start resource 'ora.mydb.mydb2.inst'.
DBCA_PROGRESS : 100%
following info from my template file
<MiscParams>
<databaseType>MULTIPURPOSE</databaseType>
<maxUserConn>20</maxUserConn>
<percentageMemTOSGA>40</percentageMemTOSGA>
<customSGA>false</customSGA>
<archiveLogMode>false</archiveLogMode>
<initParamFileName>+ORADG/admin/{DB_UNIQUE_NAME}/pfile/init.ora</initParamFileName>
</MiscParams>
<SPfile useSPFile="true">{ORACLE_HOME}/dbs/spfile{SID}.ora</SPfile>
</InitParamAttributes>
and dbca create +ORADG in /home/oracle dir (why??)
[oracle@rac1 ~]$ ls +ORADG/admin/mydb/pfile/init.ora.6132011173958
+ORADG/admin/mydb/pfile/init.ora.6132011173958
Edited by: 859340 on 2011-7-12 下午7:25

Create database using datafiles from cold backup

hi,
I've been given a bunch of datafiles from a cold backup.
I have created my own database using the same DB_NAME as the original.
I now want to be able to attach these datafiles to my database. How do I go about? Do I need to start the database in mount mode so that the control file is open, then start adding these datafiles to the tablespace, and then open the database?
Any help would be appreciated.
Thank you.

OracleGuy777 wrote:
hi,
I've been given a bunch of datafiles from a cold backup.
I have created my own database using the same DB_NAME as the original.
I now want to be able to attach these datafiles to my database. How do I go about? Do I need to start the database in mount mode so that the control file is open, then start adding these datafiles to the tablespace, and then open the database?
Any help would be appreciated.
Thank you.Hi,That is not possible.You actually have two different databases,however db_name is same but every db_name are same databases is not same.These has own DBID in same environment.(Their controlfile and datafile information exactly is different).There is similar way is transportable tablespace feature.You can use this feature to transport tablespace between databases.For more information see below link.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tspaces.htm#i1007169

How to create database using modified INIT.ORA file

anybody know anything about the creating a
database using modified init.ora file?
Thanks

If you take a look at the "Getting Started" guides, there's a section on creating databases and init.ora files.
Look for the document
Oracle8i Enterprise Edition for Windows NT Getting Started
Justin
null

How to create database using Java Application or GUI?

As what mention above, I would like to ask how to create a simple database that can keep information and perform some basic functions like add , delete, search, modify?
Thanks in advance

Don't waste your time trying to create databases. There are many good, free, databases already available. MySQL and Postgresql are just a couple that come to mind.

Error occured while create database using orcl1.sh:ORA-0020

===========================================================
Connected.
SQL> spool /home/oracle/app/oracle/product/9.2/assistants/dbca/logs/CreateDB.log
SQL> startup nomount pfile="/home/oracle/app/oracle/admin/orcl/scripts/init.ora";
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> CREATE DATABASE orcl
2 CONTROLFILE REUSE
3 MAXINSTANCES 32
4 MAXLOGHISTORY 0
5 MAXLOGFILES 192
6 MAXLOGMEMBERS 3
7 MAXDATAFILES 1024
8 DATAFILE '/dev/rora9_system' SIZE 512M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
9 EXTENT MANAGEMENT LOCAL
10 DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE '/dev/rora9_temp' SIZE 512M REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
11 UNDO TABLESPACE "UNDOTBS1" DATAFILE '/dev/rora9_undo1' SIZE 512M REUSE AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
12 CHARACTER SET ZHS16GBK
13 NATIONAL CHARACTER SET AL16UTF16
14 LOGFILE GROUP 1 ('/dev/rora9_redo11') SIZE 102400K REUSE,
15 GROUP 2 ('/dev/rora9_redo12') SIZE 102400K REUSE;
CREATE DATABASE orcl
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: controlfile could not be created
ORA-00202: controlfile: '/dev/rora9_ctl1'
ORA-27041: unable to open file
Additional information: 11
and the raw device has enough right
$ ls -l /dev/rora*
crwxrwxrwx 1 oracle dba 50, 15 Jul 27 10:44 /dev/rora9_ctl1
crwxrwxrwx 1 oracle dba 50, 16 Jul 27 10:44 /dev/rora9_ctl2
crwxrwxrwx 1 oracle dba 50, 17 Jul 27 10:44 /dev/rora9_ctl3

ORA-01081: cannot start already-running ORACLE - shut it down firstYour instance is already running, evidently it's not the first time you're trying this. Shutdown the instance before retrying.
Paul

OIM integration with Microsoft CRM by using webservices? (OIM: Oracle Identity Management)

Hi Guys,
can you provide me integration document for my new project
OIM with Microsoft CRM, by using webservices.
Venkat
[email protected]

user1106726 wrote:
We currently have ILM 2007 in our environment with limited usage at the moment. We are looking at purchasing Oracle Identity Manager to implement an enterprise wide IAM solution.
We were wondering if it is possible to continue using ILM like a middleware between our AD forests and the Oracle IdM. Where the Oracle IdM is the overarching IAM solution and Microsoft ILM 2007/FIM 2010 is like the metadirectory for our AD forests.
Is this possible without installing the Oracle Management Connector on any of our DCs and using ILM as the directory that Oracle IdM connects to. All AD account provisioning/de-provisioning, acct updates, password sync/reset will be initiated from the Oracle IdM to ILM and then implemented on AD. In order words no direct interaction with AD domain controllers from Oracle IdM, everything will go to ILM and ILM in turn applies it to AD.
Is this possible?yes
>
Is there a custom connector that will work with ILM 2007/FIM 2010Yes, if you write one you will have a custom connector
>
Is this a simple customization or something that can be problematic and expensive?It won't be simple. Problematic and expensive maybe, depends on how good you are with OIM and ILM

Create database using mxmc-install.cmd + installing identity management

Similar Messages

Maybe you are looking for