Create Desktop Collection Fails
I have been able to create desktop collections from Win7 VM templates. I created a new template and now when I attempt to create a collection the template export finishes and the creation process errors out with the following message:
On the back end in the event log I see these errors:
Remote Desktop Virtualization Host could not load metadata for the virtual machine named
Windows 7 Enterprise Production Template.
Remote Desktop Virtualization Host could not retrieve a section in the virtual machine
metadata XML file for the virtual machine with the GUID of
0387662E-2EAC-4090-9FA7-AA5D561737D3.
Virtual machine GUID: 0387662E-2EAC-4090-9FA7-AA5D561737D3
Hresult: 0x80070490
Can someone point me in the right direction to what is wrong with my template?
Hi,
Thank you for posting in Windows Server Forum.
From the error description it seems that RD Virtualization host can’t load the data for virtual machine template. Apart If you're using Windows 7 as the template VM, it needs to be Windows 7 SP1 and you should update the integration components on the VM before
you sysprep it. However for a try if possible then try to reinstall and verify.
You can refer this article to reconfigure and check the result.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Similar Messages
-
Hi all, thought I would share a fix I found out after hours of pulling my hair out.
If you get the following error when creating a new RD Collect: "The virtual desktop must be in a stopped state: Could not identify the state of the virtual desktop. Ensure that the RD virtualization host server is available on the network and
the virtual desktop is shut down"
ENSURE your RD Connection Broker and RD Virtualization Host are both either 2012 or 2012 r2. I was unable to create new VD Collections until I moved my Connection Broker from a 2012 box, to a 2012 r2 box. (My RD Virt Host is 2012 r2.) Once I did that,
everything worked fine.Hi,
Thanks for your good sharing.
I think it will help the people who have the same issue.
Have a nice day.
Regards.
Vivian Wang -
Create desktop quietly fails - doesn't like my ".portal" file
Guys,
Since SP2, we're having trouble creating a desktop to "import" our ".portal" file.
After going through the sequence of clicks, it just comes back quietly but the
desktop is not there. It only does this if I "Choose a Template". It seems that
it doesn't like something in my template file but gives no indication of what.
If I revert back to an old template file, it works. However, I also re-created
a new template file from scratch and it won't read that one either.
Any clues?
Is there some debug/logging options for Admin Portal?
Thanks,
PhilJeff,
Thanks for the reply.
The .portal file was created in workshop and workshop reads it fine.
I discovered that after deleting all my books and pages from the Admin Portal
library, it imported my .portal file successfully. I'm thinking it finds some
"Definition Label" conflict between those in the .portal file and what's in the
library.
Phil
"Jeff Mueller" <[email protected]> wrote:
>
Hi Phil - was there no error message on the console? If not, please
check the
portalServer.log file and/or wl-domain.log file for that server session.
There
should be an error message listed there. It sounds like it's most likely
bad
xml in the .portal file. Did you create the new .portal file in Workshop?
Does
it open correctly there?
Jeff
"Phil Grimm" <[email protected]> wrote:
Guys,
Since SP2, we're having trouble creating a desktop to "import" our ".portal"
file.
After going through the sequence of clicks, it just comes back quietly
but the
desktop is not there. It only does this if I "Choose a Template". It
seems that
it doesn't like something in my template file but gives no indication
of what.
If I revert back to an old template file, it works. However, I alsore-created
a new template file from scratch and it won't read that one either.
Any clues?
Is there some debug/logging options for Admin Portal?
Thanks,
Phil -
RDS 2012 - Virtual desktop collection with powershell and custom answerfile fails on VDI deployment
Hi Guys,
I try to deploy a new virtual desktop collection with Win8 VDI's (pooled/managed) based on a custom answer file. Everything needs to automated so working with the server manager is not an option, that's why the answer file is needed.
The lab environment is based on Windows Server 2012 and Win8 Enterprise only. So functional level etc. is off course Windows Server 2012.
I Use the following command:
New-RDVirtualDesktopCollection `
-CollectionName "Pooled Managed Win8" `
-Description "This collection contains Pooled and Managed Win 8 VDI machines." `
-OU "VDI" `
-ConnectionBroker "RDSCB01.lab.local" `
-PooledManaged `
-CustomSysprepUnattendFilePath "\\hyper02\_Unattend\OOBE-only.xml" `
-VirtualDesktopAllocation @{"hyper02.lab.local"=3} `
-VirtualDesktopNamePrefix "Pooled-Win8-" `
-UserGroups "lab.local\domain users" `
-MaxUserProfileDiskSizeGB 1 `
-VirtualDesktopTemplateHostServer "hyper02.lab.local" `
-VirtualDesktopTemplateName “_WIN8-Template” `
-UserProfileDiskPath "\\hyper02.lab.local\_UserProfileDisks" `
-StorageType LocalStorage `
-LocalStoragePath "E:\_VDI" `
-Force `
-Debug
$error[0]|format-list -force
I tried multiple answer files, but even with this simple one it fails:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>nl-NL</UserLocale>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<UserAccounts>
<AdministratorPassword>
<Value>UABhAHMAcwB3AG8AcgBkACEAQQBkAG0AaQBuAGkAcwB0AHIAYQB0AG8AcgBQAGEAcwBzAHcAbwByAGQA</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
<LocalAccounts>
<LocalAccount wcm:action="add">
<Password>
<Value>UABhAHMAcwB3AG8AcgBkACEAUABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
</Password>
<Description>Admin</Description>
<DisplayName>Admin</DisplayName>
<Group>Administrators</Group>
<Name>Admin</Name>
</LocalAccount>
</LocalAccounts>
</UserAccounts>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<HideLocalAccountScreen>true</HideLocalAccountScreen>
<HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
<HideOnlineAccountScreens>true</HideOnlineAccountScreens>
<HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>3</ProtectYourPC>
<SkipMachineOOBE>true</SkipMachineOOBE>
<SkipUserOOBE>true</SkipUserOOBE>
</OOBE>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:d:/=%20software/iso's/lic/en_windows_8_enterprise_x64_dvd_917522/sources/install.wim#Windows 8 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Everything goes fine, until is comes to the deployment of the VDI machines and the answer file is called. It fails with the following error:
PS N:\> \\dc01\isos\New-VirtualDesktopCollection.ps1
Unable to retrieve the details of the virtual desktop collection.
+ CategoryInfo : WriteError: (:) [Start-RDVMRollout], RDManagementException
+ FullyQualifiedErrorId : StartRDVirtualMachineRollout,Microsoft.RemoteDesktopServices.Management.Cmdlets.StartRDVirtualMachineRo
lloutCommand
+ PSComputerName : localhost
CollectionName Type Size PercentInUse
Pooled Managed... PooledManaged 0 0
writeErrorStream : True
OriginInfo : localhost
Exception : System.Management.Automation.RemoteException: Unable to retrieve the details of the virtual desktop
collection.
TargetObject :
CategoryInfo : WriteError: (:) [Start-RDVMRollout], RDManagementException
FullyQualifiedErrorId : StartRDVirtualMachineRollout,Microsoft.RemoteDesktopServices.Management.Cmdlets.StartRDVirtualMachineRolloutCo
mmand
ErrorDetails :
InvocationInfo :
ScriptStackTrace :
PipelineIterationInfo : {}
PSMessageDetails :
Without the answer file parameter is runs perfectly, BUT the VDI machines get the OOBE.... That's not what we want off course....
This link (http://support.microsoft.com/kb/2747656?wa=wsignin1.0) and other sources tell me that when i set the regkeys i can find a log in c:\windows\logs, but there is
nothing. I looked on the management server and the connection broker.
The only thing i could find in the event viewer was this:
The XML input specified for the VM Provisioning job is not in a valid format. Error: 0xC00CEE03
Input XML:
<?xml version="1.0"?>
<rdvp:RDVProvisioning xmlns:rdvp="http://www.microsoft.com/rdv/2010/05/">
<rdvp:ProvisionPoolRequest><rdvp:Job>
<rdvp:Action>Create</rdvp:Action>
<rdvp:OnError>Stop</rdvp:OnError></rdvp:Job>
<rdvp:Pool><rdvp:Name>Pooled_Managed_W</rdvp:Name>
<rdvp:Type></rdvp:Type>
<rdvp:VhdType>DiffDisk</rdvp:VhdType>
<rdvp:SaveDelay></rdvp:SaveDelay>
<rdvp:Version></rdvp:Version>
<rdvp:MARK_HA>No</rdvp:MARK_HA></rdvp:Pool>
<rdvp:Vm>
<rdvp:BaseVmLocation>\\RDSCB01\RDVirtualDesktopTemplate\Pooled_Managed_W\IMGS\__3</rdvp:BaseVmLocation>
<rdvp:LocalVmCreationPath>E:\_VDI</rdvp:LocalVmCreationPath>
<rdvp:LocalGoldCachePath></rdvp:LocalGoldCachePath>
<rdvp:SMBShare></rdvp:SMBShare>
<rdvp:EnableVmStreaming>0</rdvp:EnableVmStreaming>
<rdvp:RunVMsFromSMB>0</rdvp:RunVMsFromSMB>
<rdvp:NamingPrefix>Pooled-Win8</rdvp:NamingPrefix>
<rdvp:NamingStartIndex>1</rdvp:NamingStartIndex>
<rdvp:Domain>lab.local</rdvp:Domain>
<rdvp:OU>OU=VDI,OU=Computers,OU=Kamer 2101,DC=lab,DC=local</rdvp:OU>
<rdvp:ProductKey></rdvp:ProductKey>
<rdvp:UnattendXml>
<![CDATA[<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OOBE>
<HideEULAPage>true</HideEULAPage>
<HideLocalAccountScreen>true</HideLocalAccountScreen>
<HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
<HideOnlineAccountScreens>true</HideOnlineAccountScreens>
<HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>3</ProtectYourPC>
<SkipMachineOOBE>true</SkipMachineOOBE>
<SkipUserOOBE>true</SkipUserOOBE>
</OOBE>
</component>
</settings>
</unattend>]]>
</rdvp:UnattendXml>
</rdvp:Vm>
<rdvp:HyperVHosts>
<rdvp:HyperVHost>
<rdvp:Name>hyper02.lab.local</rdvp:Name>
<rdvp:NumberVms>3</rdvp:NumberVms>
</rdvp:HyperVHost>
</rdvp:HyperVHosts>
</rdvp:ProvisionPoolRequest>
</rdvp:RDVProvisioning>----------------------------------------------------------------------Log Name: Microsoft-Windows-TerminalServices-SessionBroker/Admin
Source: TerminalServices-SessionBroker
EventID: 1549
Level: Error
User: NETWORK SERVICE
Task Category: MS VM Provisioning Plugin
Computer: RDSCB01.lab.local
I hope we can get this working, thanks in advance everybody!
Regards,
BartHi Bartsp34ks,
I'm trying to make a powershell script like yours.
But at some point I receive this error:
System.Management.Automation.RemoteException: VM ASD-1: The data area passed to a system call is too small. (Exception from HRESULT: 0x8007007A)
My Powershell script is:
$CollectionName = Read-Host 'What Name should the Collection have?'
$Description = Read-Host 'Type a description of the Collection'
$OU = Read-Host 'In which OU should I put the Collection?'
$ConnectionBroker = Read-Host 'What is the Connection Broker Name? (use FQDN)'
$Sysprep = Read-Host 'Type the Unattend file location'
$DesktopAllocation = Read-Host 'On which RD Virtualization Host server should I create the Collection?'
$DesktopAllocationNR = Read-Host 'How many Virtual Desktop would you like?'
$NamePrefix = Read-Host 'What is the Prefix Name?'
$NameSuffix = Read-Host 'What is the Suffix Name?'
$UserGroup = Read-Host 'Which User Group can use the Collection?'
$UserProfile = Read-Host 'How big can the ProfileDisk be?'
$TemplateServer = Read-Host 'What is the RD Host that has the Virtual Desktop Template? (use FQDN)'
$TemplateName = Read-Host 'What is the Virtual Desktop Template Name?'
$UserProfilePath = Read-Host 'What should be the User Profile Path?'
$StorageType = Read-Host 'How should be stored?'
$StoragePath = Read-Host 'Type the Path'
New-RDVirtualDesktopCollection `
-CollectionName $CollectionName `
-Description $Description `
-OU $OU `
-ConnectionBroker $ConnectionBroker `
-PooledManaged `
-CustomSysprepUnattendFilePath $Sysprep `
-VirtualDesktopAllocation @{$DesktopAllocation=$DesktopAllocationNR} `
-VirtualDesktopNamePrefix $NamePrefix `
-UserGroups $UserGroup `
-MaxUserProfileDiskSizeGB $UserProfile `
-VirtualDesktopTemplateHostServer $TemplateServer `
-VirtualDesktopTemplateName $TemplateName `
-UserProfileDiskPath $UserProfilePath `
-StorageType LocalStorage `
-LocalStoragePath $StoragePath `
-Force `
-Debug
$error[0]|format-list -force
Thanks for help -
I have the latest Creative Cloud versions of Lightroom and Lightroom Mobile on my Ipad. On my desktop I have created a collection which I have put in a custom order. On my Ipad I go into that collection and set the order to custom order, which I presume means the order I have on my desktop. However, the photos on the Ipad seem to be just random photos from the collection THEN the rest of the collection is in the correct order after that.
Do you have virtual copies in your collection?
Could you please send send me a LR Desktop +Mobile diagnostig log - best as a private message with a downloadable dropbox link
You can trigger the Lr Desktop diagnostig log via LR Desktop preferences -> Lightroom Mobile and when you hold down the alt key you will notice a generate diagnostic log button.
The Lr Mobile app log can be triggered when you open up the settings and long press the to LR Icon a diagnostic log will be generated and attached to your local mail client. While opening the settings could you double check if you are signed-in?
Thanks
Guido -
Creating a personal virtual desktop collection - no existing virtual desktops listed
I have 2 windows server 2012 hosts in a failover cluster. This cluster is for RDS and VDI. Attempting to create a virtual desktop collection and there are no existing virtual desktops to select, even though i have created many from a template
via System Center VMM 2012 sp1.Hi,
Thanks for your comment. Sorry for late response. Do you got any solution?
Please check below link for detailed information and try to reconfigure and verify whether it getting worked or not.
Windows 8 / Windows Server 2012: VDI Personal Desktop Collections
http://blogs.technet.com/b/askperf/archive/2012/11/01/windows-8-server-2012-vdi-personal-desktop-collections.aspx
Personal Virtual Desktops
http://blogs.msdn.com/b/rds/archive/2009/11/16/personal-virtual-desktops.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
Create a Collection that populate with machines that failed on a TS deployment.
Hi Everyone,
I would like to create a Device Collection containing all machines that failed on a TS deployment. Is there a way? What would be the WQL for this?
Thank you in advance.You can do something like this:
http://myitforum.com/cs2/blogs/gramsey/archive/2006/10/20/How-To_3A00_-Create-a-Collection-Based-on-an-Advertisement-Status.aspx
Both classes SMS_R_System and SMS_ClientAdvertisementStatus
still exist in the same form and format.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Windows Server 2012 Pooled Virtual Desktop collection GetVMstate issue
I am trying to create a Pooled Desktop collection with my Powered off VM and it errors out The
virtual desktop must be in a stopped state: Could not identify the state of the virtual desktop. Ensure that the RD virtualisation host server is available on the network and the virtual desktop is shut down
In the debug logs it shows.
Component RdmsModel: GetVMstate for Vm Win7_BaseVM failed with error 16386
Component RDExceptionHandler: Could not identify the state of the virtual desktop. Ensure that the RD Virtualization Host server sunflower-1.HYPERQA.NUTANIX.COM is available on the network and that the virtual
desktop Win7VMSF is shut down.
Please help on resolving this GetVMState issue.Hi Krishna,
Thank you for posting in Windows Server Forum.
When you are configuring RDVH initially, please see that you have meet prerequisites. Remember that you need these pre-requirements:
• Database based on SQL Server 2008 R2
• Static IP Address for all Broker
• Round Robin DNS
• All RD Broker must be members of AD Windows Group (es. RDCB Server Group)
• The group must be insert into SQL Server as sysadmin ONLY for the DB creation. After that DB will be created give the db_owner permission only for their DB
More information.
Windows Server 2012 R2: Unable Add New VDI Template
In addition, we need all RD Broker must have the same SQL Native Client as main SQL Server (es. SQL Server 2012 SP1). The Connection Broker server's computer account MUST be a member of the local administrators group on the Virtual Host (RDS Host) machine and
then reboot the server. Finally check the result.
Windows Server 2012 Virtual Desktop Template Issue
Hope it helps!
Thanks.
Dharmesh Solanki -
Cant Create VDI collection in server 2012 r2 Transfer location failure
I'm setting up a 2012 R2 VDI install and having problems creating the VDI collection. No matter what target folder I specify as the transfer location, it says "VDI collection failed with the following errors: Unable to copy the virtual desktop to the
export location. Check if the export location exists and if it is configured with the correct permissions."
That has to be an erroneous error because when I type the share location into the Deployment properties, it checks for the share an won't let me specify an invalid location.
I've tried uninstalling and reinstalling RDS as completely as I can but I cant seem to get rid of this problem. Where are these deployment properties stored and how can I delete them so they get recreated by the install?
Please help!It turns out that the error was not a problem with the transfer share. Something in the configuration prevented the hyper-v host server from connecting to the broker where the transfer share was located. Net use commands run the host produced an "error
53". Removing the Hyper-V did NOT solve the problem nor did removing the updated network drivers. The only solution I found was to remove the entire RDS installation from all the servers in the installation and reload Windows server 2012 R2 on the Hyper-V
host from scratch.
Once those tasks were completed, everything ran as expected.
I found the following article to actually be useful: http: //blog.itvce.com/?p=1569
It clearly explains most of the steps to install RDS VDIs simply and quickly. I'm still waiting for Microsoft to produce a simple brief step by step that includes component high availability and that explains how the system actually works both from a user
perspective as well as an administrator role. While it may exist out there somewhere, It is obscured by the countless third-party attempts to document these steps.
I'm disappointed that MS leaves it to third parties to document their products.
As for this installation, you must figure out the steps in a test environment and be prepared to rebuild your servers along the way, as uninstalling the RDS product components does not work properly as is typical with many MS products of the past. Also,
make sure all your chipset and network drivers are up to date as many of mine installed using "MS generic" drivers that simply do not work properly in the Hyper-V environment. -
Adobe CS6 Master Collection failed to initialize
I'm trying to install Adobe CS6 Master Collection but this always comes up:
Adobe Support Advisor no longer exists so I can't download it???
Anyone know what I can do?start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html -
Hi Everyone,
I am really stuck at a point from where I do not know which route to take. I am trying to install OBIEE 11g (11.1.1.5) on my Windows 7 (32-bit) laptop. I have tried all the options:
1. Simple Install
2. Enterprise Install
3. Software only install (after installing Weblogic 10.3.4.0 separately)
Everything goes well till the step Bi Configuration->Creating Domain.
In this process whenever it reaches the stage when it tries to start Node Manager, it starts getting java exceptions and fails. It typically occurs when it does not find the nodemanager.properties file and tries to save the configurations there. It then encounters a Fatal Error.
Excerpt from install2011-07-29_06-13-21PM.out
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Launching NodeManager ...
Properties: {ListenPort=5556,NativeVersionEnabled=true,NodeManagerHome=C:/FusionMW/wlserver_10.3/common/nodemanager,StartScriptEnabled=true,}
Command: C:\FusionMW\JROCKI~1.2-4\jre\bin\javaw.exe -classpath "C:\FusionMW\JROCKI~1.2-4\jre\lib\rt.jar;C:\FusionMW\JROCKI~1.2-4\jre\lib\i18n.jar;C:\FusionMW\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\FusionMW\JROCKI~1.2-4\lib\tools.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic.jar;C:\FusionMW\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\FusionMW\WLSERV~1.3\server\lib\webservices.jar;C:\FusionMW\modules\ORGAPA~1.1\lib\ant-all.jar;C:\FusionMW\modules\NETSFA~1.0_1\lib\ant-contrib.jar;C:\Users\SUCHAT~1\AppData\Local\Temp\.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip;C:\FusionMW\utils\config\10.3\config-launch.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbytools.jar" weblogic.NodeManager "-v"
NMProcess: <Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
NMProcess: Jul 29, 2011 7:21:31 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap
NMProcess: INFO: Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig
NMProcess: INFO: Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true
NMProcess: <Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: WARNING: Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: INFO: Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'
NMProcess: <Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
NMProcess: java.lang.NullPointerException
NMProcess: at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess: at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess: at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess: at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess:
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer main
NMProcess: SEVERE: Fatal error in node manager server
NMProcess: java.lang.NullPointerException
NMProcess: at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess: at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess: at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess: at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess: Stopped draining NMProcess
NMProcess: Stopped draining NMProcess
Successfully launched the Node Manager.
The Node Manager process is running independent of the WLST process.
Exiting WLST will not stop the Node Manager process. Please refer
to the Node Manager logs for more information.
The Node Manager logs will be under C:\FusionMW\wlserver_10.3\common\nodemanager
Node Manager starting in the background
Excerpt from nodemanager.log which is created at <WL_HOME>\common\nodemanager:
<Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
<Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
<Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
<Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
<Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
java.lang.NullPointerException
at java.util.Hashtable.containsKey(Hashtable.java:314)
at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
at weblogic.NodeManager.main(NodeManager.java:31)
After this it hangs for a long time before finally coming up with Node Manager Server Timed Out error and finally the Creating Domain step fails.
One thing that I have noticed is that whenever it tries to create the nodemanager.properties or write to it it encounters this error and hence the nodemanager.properties file is also not getting generated.
I have ensured that there are no spaces in the TEMP and TMP paths. I even tried creating and putting the nodemanager.properties file in the location but that too does not work.
Strange part is that when I install Weblogic separately and have nodemanager as a windows service, then with the nodemanager.properties that I created the windows service runs, but the OBIEE installation still fails.
Any help on this would be greatly appreciated.
Thanks and regards,
SubhoMy problem is "creating domain is failed". I guess that the issue with windows 7 32 bits on laptop doesn't configure and run nodemanager. I tried to start nodemanager but don't work (with weblogic scriptinf tools WST). However, Weblogic run ok but nodemanager is inactive. Also it doesn't create nodemanager.propierties. If I create a file nodemanager.properties (or I copied on directory obiee_home\ws_server_10.3\common\nodemanager) obiee installer configures its parameters pre-configured (if I modify a parameter, the installer modify it a default value and I don't know where is these parameters and its definition).
I have installed obiee simple and enterprise and it don't work. I have installed on oracle 11g R2 (desktop and enterprise with datawarehouse) and obiee installer doesn't work. Further this installation obiee delay an hour and then generates error in my case "creating domain is failed".
I'm going try to run install obiee 11.1.1.5 on windows 7 xp mode.
Important: We need help of oracle experts or Oracle communicates if obiee installs or not on windows 7 32 bits laptop because We have wasted
Thanks if anyone help us!! -
Create Device Collection WITH Refresh Schedule using Powershel CMDLets
Hello everyone
I'm attempting to create a PowerShell script to create a device collection and I'm running into a very frustrating issue. I want to be able to set the collections refresh time but can't seem to get it to work. This code here works to create the
collection and tell it to do incremental updates but I cannot figure out how to set refresh time. Everything I've attempted has failed and google seems to be no help right now.
$CollectionName = "Test"
$CollectionQueryValue = 'select * from SMS_R_System inner join SMS_G_System_SYSTEM on SMS_G_System_SYSTEM.ResourceId = SMS_R_System.ResourceId where SMS_G_System_SYSTEM.NetBIOSName in ("Hostname")' $CollectionQueryName = "Direct by Hostname"
New-CMDeviceCollection -Name $CollectionName -LimitingCollectionName "All Systems" -RefreshType ConstantUpdate
Thanks for your help!I haven't tried it, but the following should work:
$Sched = New-CMSchedule -Start "01/02/2014 1:00 AM"
-DayOfWeek Sunday -RecurCount 1
New-CMDeviceCollection -Name "C1"
-LimitingCollectionName "All Systems" -RefreshSchedule $Sched -RefreshType Both
Torsten Meringer | http://www.mssccmfaq.de -
Updating Template on Managed Personal Desktop Collection
I've created a Personal Desktop collection in Server 2012 R2 and selected "Automatically Manage Virtual Desktops" so machines are created automatically using a template. I've successfully added several Virtual Desktops to the collection,
now I need to update the template to included new patches or software. I'm not worried about updating the existing virtual desktops because they will get the patches and software from SCCM. However, I do want the changes to be part of the template
so they are immediately there for new virtual desktops that are added. I haven't found a way to do this is the Server Manager or Powershell, there is an option for recreating pooled desktops, but no way that I see to use a different or newer template
on an existing Personal Desktop collection.
Do I need to manually export the template machine to the Collections IMGS folder and overwrite what is there? Also, it doesn't make sense to delete/recreate or make a new collection for a template update.Hi Darin,
Thank you for contacting Microsoft.
I have discussed this issue with our team. There is no supported way to do this. You would need to update the template VM and
then re-export it, both of which have to be done manually. Some things to keep in mind though…if you just update the .vhd and you’ve changed VM Settings as well, those settings will not get picked up until the VM is re-exported.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
JWS Desktop shortcut fails to update after JNLP change in 1.6.0 update 18
Has anyone else noticed the desktop shortcut fail to update after a change to the JNLP with the latest Java 1.6.0 update 18 release?
Here are the steps we've found to replicate the issue on Windows XP, Vista, and Windows 7 using both IE and Firefox:
1) Download a JWS application and allow the desktop link to be created
2) Inspect the desktop shortcut and notice the path to the JNLP cache entry
3) Modify the JNLP at the server
4) Run the application via the desktop link - at this point the application will download updates and execute without issues.
5) Close the application - upon close, JWS will remove the old JNLP cache entry if the JNLP contained the security/all-permissions directive
6) Inspect the desktop shortcut again - notice that the path to the JNLP cache entry will remain unchanged
7) Launch the application again using the desktop link - JWS will fail with a cache exception if the JNLP contained the security/all-permissions element or will just run from the old JNLP
I've submitted a bug but just wanted to confirm that others are encountering the same issue.
Thanks,
TroyThanks for confirming.
This issue seems to continually creep into the Java releases. In the 1.6.0 releases, the issue is resolved in update 7 through update 11. Update 12, 13, and 14 all had various JNLP issues but I did find this specific issue with update 14. It was fixed again in update 15 and remained fixed through update 17.
I submitted two bugs and provided a simple sample application on our production site to use for testing with a url to update the last modified time. If bug is accepted, I'll post it here for others to vote for a fix. -
Hi,
When creating a Site collection using Central admin, i am getting the error "One or more types failed to load. Please refer to the upgrade log for more details." . Microsoft.ApplicationServer.Caching.Core dll version on my machine is 1.0.4632 (App
Fabric 1.1).
Stack Trace
SharePoint Foundation Upgrade SPSiteWssSequence ajywy ERROR Exception: Could not load file or assembly 'Microsoft.ApplicationServer.Caching.Core, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified. dd64ad9c-0f90-e07d-aaaa-13533e0e9e4f
Thanks,
ThomasHi Thomas,
According to your description, my understanding is that you got an error when you created a site collection in SharePoint 2013.
I found a similar thread with yours, maybe it also was created by you. Anyway ,in the thread, the workaround is Changing the virtual directory web config of CA (Option 1 and 2 mentioned at
http://technet.microsoft.com/en-us/library/dn473937.aspx ) and it worked.
More information, please take a look at:
http://sharepoint.stackexchange.com/questions/111439/error-creating-site-collection-could-not-load-file-or-assembly-microsoft-appl
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support
Maybe you are looking for
-
How can I get my email to delete off my computer as I delete it off my phone?
I can't seem to sync my phone to my computer when I delete my email. I have to delete from my phone and then log in to my Cox email to delete from there. Is there a way to get it off both at the same time? I have a POP address with cox.
-
How to display field value only once in REUSE_ALV_GRID_DISPLAY
hi experts, i am using REUSE_ALV_GRID_DISPLAY, for alv outpur display.but i want one of the field in output ,not to display the value which is of same, it have to be displayed only once, I mean i have a number which contains multiple l
-
I can't seem to get my 3D to work it stays grayed out foreverything from simple shapes to basic text Help!!! Ive done this before but now its not working, Ive tried converting to shape razterizing.
-
Error in getting value after rule execution
hi, in the application we have a particular way to calculate the periodic value which is current accumulated - prior accumulated. now the problem is that for the current month the acccumulated value for a particular account has not been fed in the sy
-
Cannot enable wget in pacman.conf(solved)
Pacman does not recognize wget in /etc/pacman.conf.... [root@n6re ~]# pacman -Scc error: config file /etc/pacman.conf, line 19: directive 'xferCommand' noted. [root@n6re ~]# Attempting to eliminate pacman's filling of my /root partition during full s