Create Material Master Revision Level using CC02

Dear oss ,
Using CC02 for a change number I can view object material and I can insert a new material. The revision level field is greyed.
Can I have a chance to create revision level for a material directly using CC02 ?
Thanks.

If you want to create revision level of Material then use t-code CC11. I hope it would help you.
Thanks!!!

Similar Messages

Synchronizing Material Master revision level across multiple plants

Hello,
If an organization uses material master revision level to maintain the details of material's validity across different plants then we see a material master with different revisions in that organization. Now I would like to understand the impact of this practice in big organizations , is it advisable to have a material master with different revisions in different plants? , if not then which is the best way to synchronize these material masters ( with different revision level ), which are already in use?
Bets Regards,
Avinash
Message was edited by: Ulf Petzel

Hello Ulf,
Thanks for your reply, the actual issue is..
There are two companies; both are using the same material.
We are building a central system and synchronizing the materials from all companies.
While synchronization, we found that revision level are different across companies.
1.      Should we avoid using revision level in our organization?
2.      If I can find the validity of a material with change no + material + plant, then what is the purpose
         of the revision level?
3.     What will be the impact, if we remove the entire revision level across all companies?
4.     In real world, across different organizations, how revision level is synchronized across companies or at least in the central system.
Please let me know your valuable inputs.
Thanks
Sridhar

Open PR Material Master Revision Level

Hi,
I am working on upgrade from 4.5b to ecc6.0.In this Project Material Revision Level and Change Number is assigned with Z Program.
The Requirement is the Program has to check the Open PR 's and that particular Material needs to be updated with Change Number and Revision Level.
Now the Functional Specification to be prepared for the Technical Team -Based on the Open PR condition -Now what are the fields to be specified in EBAN table in order to fullfill the open PR.
As per my understanding Open PR means PO is not created and PO is created means that PR is closed.
Or any other fields are to taken into consideration for preparing Functional Specification
Please reply me ..
Thanks for the reply.

It is very much possible. You can try this use case. It's pretty simple. But Vice-versa is not possible.
~ Guru

Create Material Master using workflow (urgent)

Hello all,
We have an urgent client requirement to create material master using workflow.
Different views for the material master will be created by the relevant departments.
ex: Accouting 1, 2 will go to accounts deptt.
I have studied the workflow tutorial (20 units) on <b>SAP help</b> for leave of absence and have some understanding of objects, methods, bindings etc
I am however finding it very difficult to define the steps to create a workflow for material master. Are there any standard steps already defined that i can use.
Any help/inputs will be greatly appreciated.
Regards
S. Datar

Hi,
You need to speak to a workflow consultant.
You can get workflow to do many things (including creating a material master) but it takes a lot of coding and design.
For those of you who think that workflow is just used for the standard SAP workflow tasks, you have to realise that workflow is far more powerful and far more useful than many people think.
It is always referred to as "Event triggered messaging" but it is more accurate to call it "Event triggered events".
Within workflow you can chain together many different transactions and or ABAPS and so you can get it to do virtually anything you want (as long as you know how).
In this case you need the workflow to trigger an ABAP or BTCI session etc. that works through the MM01 transaction. It is relatively easy to get it to do this, but I am not technical enough to be able to help with the steps involved (sorry)
Steve B

CREATING MATERIAL MASTER USING BAPI-GROSS_WT VALUE IS NOT SEEN

HI GUYS,
I AM CREATING MATERIAL MASTER USING BAPI_MATERIAL_SAVEDATA.I AM LOADING THE VALUES FROM A FLAT FILE .
THE VALUE FOR GROSS_WT IS NOT SEEN WHEN THE MATERIAL IS CREATED.
THE BAPI_MARM STRUCTURE HAD THE FILED BRGEW(GROSS_WT).
I AM ABLE TO LOAD NET WT CORRECTLY BUT AM NOT ABLE TO LOAD GROSS WT.
ANY SUGGESTIONS AS TO WHY THIS IS HAPPENING AND PROVIDE ME WITH A SOLUTION.
THANKS.

Error: The numeric material number 1000000 was transferred without leading zeros for material: 1000000
From next timepost only related code to make it look better.
Use conversion exit for MATNR field.

Function modules to create material master

hi guys! i know there are function modules to create material master but is there any standard program to process mass uploading of data to create material master? thanks.

HI
these are all the different function modules that are availale in abap
ABAP_DOCU_DOWNLOAD     Download ABAP documentation in HTML format.
APPL_LOG_DELETE     With this function module you delete logs in the database according to specified selection conditions
APPL_LOG_DISPLAY     With this function module you can analyze logs in the database.
APPL_LOG_DISPLAY_INTERN     With this function module you can analyze logs in local memory, e.g. when you have only collected log records at runtime and do not want to write to the database.
APPL_LOG_INIT     This function module checks whether the specified object or sub-object exists and deletes all existing associated data in local memory.
APPL_LOG_READ_DB     With this function module you read the log data in the database for an object or sub-object according to specified selection conditions.
APPL_LOG_READ_INTERN     With this function module you read all log data whose log class has at least the specified value, from local memory, for the specified object or sub-object.
APPL_LOG_SET_OBJECT     With this function module, you create a new object or sub-object for writing in local memory. With a flag you can control whether the APPL_LOG_WRITE_... messages are written in local memory or are output on the screen.
APPL_LOG_WRITE_DB     With this function module you write all data for the specified object or sub-object in local memory to the database. If the log for the object or sub-object in question is new, the log number is returned to the calling program.
APPL_LOG_WRITE_HEADER     With this function module, you write the log header data in local memory.
APPL_LOG_WRITE_LOG_PARAMETERS     With this function module, you write the name of the log parameters and the associated values for the specified object or sub-object in local memory. If this function module is called repeatedly for the same object or sub-object, the existing parameters are updated accordingly. If you do not specify an object or sub-object with the call, the most recently used is assumed.
APPL_LOG_WRITE_MESSAGE_PARAMS     With this function module you write a single message, with parameters, in local memory. Otherwise the function module works like APPL_LOG_WRITE_SINGLE_MESSAGE.
APPL_LOG_WRITE_MESSAGES     With this function module you write one or more messages, without parameters, in local memory.
APPL_LOG_WRITE_SINGLE_MESSAGE     With this function module you write a single message, without parameters, in local memory. If no header entry has yet been written for the object or sub-object, it is created. If you do not specify an object or sub-object with the call, the most recently used is assumed.
ARFC_GET_TID     will return the IP address of the terminal in hex.
BAL_CNTL_CREATE     Create Control for log display
BAL_CNTL_FREE     Release Control
BAL_CNTL_REFRESH     Put new data in log display
BAL_DB_DELETE     Delete logs from the database
BAL_DB_DEQUEUE     Unlock log
BAL_DB_ENQUEUE     Lock log
BAL_DB_LOAD     Load logs from the database
BAL_DB_LOAD     Load log(s)
BAL_DB_SAVE     Save logs in the database
BAL_DB_SAVE     Save log(s)
BAL_DB_SAVE_PREPARE     Prepare save
BAL_DB_SEARCH     Find logs in the database
BAL_DSP_LOG_DISPLAY     Display messages in memory
BAL_DSP_LOG_DISPLAY     Display Log
BAL_DSP_LOG_PARAMETERS     Either output extended long text or call a callback routine (based on the data in BAL_S_LOG-PARAMS)
BAL_DSP_LOG_TECHNICAL_DATA     Output all log header data
BAL_DSP_MSG_LONGTEXT     Display message long text
BAL_DSP_MSG_PARAMETERS     Either output extended long text or call a callback routine (based on the data in BAL_S_MSG-PARAMS)
BAL_DSP_MSG_TECHNICAL_DATA     Output technical data of a message such as work area, error number, etc.
BAL_DSP_OUTPUT_FREE     End output
BAL_DSP_OUTPUT_INIT     Initialize output
BAL_DSP_OUTPUT_SET_DATA     Set dataset to be displayed
BAL_DSP_PROFILE_DETLEVEL_GET     Message hierarchy in DETLEVEL
BAL_DSP_PROFILE_NO_TREE_GET     Display without tree (fullscreen)
BAL_DSP_PROFILE_POPUP_GET     Display without tree (popup)
BAL_DSP_PROFILE_SINGLE_LOG_GET     Standard profile (SLG1) for one log
BAL_DSP_PROFILE_STANDARD_GET     Standard profile (SLG1) for a lot of logs
BAL_GLB_AUTHORIZATION_GET     Assign authorization
BAL_GLB_AUTHORIZATION_RESET     Reset authorization
BAL_GLB_CONFIG_GET     Read configuration
BAL_GLB_CONFIG_SET     Set configuration
BAL_GLB_MEMORY_EXPORT     Put function group memory in ABAP-MEMORY
BAL_GLB_MEMORY_IMPORT     Get function group memory from ABAP-MEMORY
BAL_GLB_MEMORY_REFRESH     (Partially) reset global memory
BAL_GLB_MEMORY_REFRESH     (Partially) initialize memory
BAL_GLB_MSG_CURRENT_HANDLE_GET     Get current message handle
BAL_GLB_MSG_DEFAULTS_GET     Get message defaults
BAL_GLB_SEARCH_LOG     Find logs in memory
BAL_GLB_SEARCH_MSG     Find messages in memory
BAL_LOG_CREATE     Create log with header data
BAL_LOG_CREATE     Create log with header data
BAL_LOG_DELETE     Delete log (from database also at Save)
BAL_LOG_EXIST     Check existence of a log in memory
BAL_LOG_HDR_CHANGE     Change log header
BAL_LOG_HDR_CHECK     Check log header data for consistency
BAL_LOG_HDR_READ     Read log header and other data
BAL_LOG_MSG_ADD     Put message in log
BAL_LOG_MSG_ADD     Put message in log
BAL_LOG_MSG_CHANGE     Change message
BAL_LOG_MSG_CHANGE     Change message
BAL_LOG_MSG_CHECK     Check message data for consistency
BAL_LOG_MSG_CUMULATE     Add message cumulated
BAL_LOG_MSG_DELETE     Delete message
BAL_LOG_MSG_DELETE     Delete message
BAL_LOG_MSG_EXIST     Check existence of a message in memory
BAL_LOG_MSG_READ     Read message and other data
BAL_LOG_MSG_REPLACE     Replace last message
BAL_LOG_REFRESH     Delete log from memory
BAL_LOG_REFRESH     Delete log from memory
BAL_MSG_DISPLAY_ABAP     Output message as ABAP-MESSAGE
BAL_OBJECT_SELECT     Read Application Log objects table record
BAL_OBJECT_SUBOBJECT     Check whether object and subobject exist and the combination is allowed
BAL_SUBOBJECT_SELECT     Read subobject table record
BP_EVENT_RAISE     Trigger an event from ABAP/4 program
BP_JOBLOG_READ     Fetch job log executions
CHANGEDOCUMENT_READ_HEADERS     Get the change document header for a sales document, and put the results in an internal table.
Example:
      CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
           EXPORTING
                objectclass = 'EINKBELEG'
                objectid    = l_objectid
                username    = space
           TABLES
                i_cdhdr     = lt_cdhdr.
      LOOP AT lt_cdhdr WHERE udate IN s_aedat.
        CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
             EXPORTING
                  changenumber = lt_cdhdr-changenr
             TABLES
                  editpos      = lt_editpos.
        LOOP AT lt_editpos WHERE fname = 'LOEKZ'
                           AND   f_new = 'L'.
          p_desc = text-r01. " Cancel Contract
        ENDLOOP.
      ENDLOOP.
CHANGEDOCUMENT_READ_POSITIONS     Get the details of a change document, and store them in an internal table. This will tell you whether a field was changed, deleted, or updated.
Example:
      CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
           EXPORTING
                objectclass = 'EINKBELEG'
                objectid    = l_objectid
                username    = space
           TABLES
                i_cdhdr     = lt_cdhdr.
      LOOP AT lt_cdhdr WHERE udate IN s_aedat.
        CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
             EXPORTING
                  changenumber = lt_cdhdr-changenr
             TABLES
                  editpos      = lt_editpos.
        LOOP AT lt_editpos WHERE fname = 'LOEKZ'
                           AND   f_new = 'L'.
          p_desc = text-r01. " Cancel Contract
        ENDLOOP.
      ENDLOOP.
CLAF_CLASSIFICATION_OF_OBJECTS     Return all of the characteristics for a material
CLOI_PUT_SIGN_IN_FRONT     Move the negative sign from the left hand side of a number, to the right hand side of the number. Note that The result will be left justified (like all character fields), not right justifed as numbers normally are.
CLPB_EXPORT     Export a text table to the clipboard (on presentation server)
CLPB_IMPORT     Import a Text Table from the Clipboard (on presentation server)
COMMIT_TEXT     To load long text into SAP
CONVERSION_EXIT_ALPHA_INPUT     converts any number into a string fill with zeroes, with the number at the extreme right
Example:
input = 123
output = 0000000000000...000000000000123
CONVERSION_EXIT_ALPHA_OUTPUT     converts any number with zeroes right into a simple integer
Example:
input   = 00000000000123
output = 123
CONVERT_ABAPSPOOLJOB_2_PDF     convert abap spool output to PDF
CONVERT_OTF     Convert SAP documents (SAPScript) to other types.
Example:
CALL FUNCTION "CONVERT_OTF"
       EXPORTING    FORMAT                = "PDF"
       IMPORTING    BIN_FILESIZE          = FILE_LEN
       TABLES       OTF                   = OTFDATA
                    LINES                 = PDFDATA
       EXCEPTIONS   ERR_MAX_LINEWIDTH     = 1
                    ERR_FORMAT            = 2
                    ERR_CONV_NOT_POSSIBLE = 3
                    OTHERS                = 4.
CONVERT_OTFSPOOLJOB_2_PDF     converts a OTF spool to PDF (i.e. Sapscript document)
CONVERT_TO_FOREIGN_CURRENCY     Convert local currency to foreign currency.
CONVERT_TO_LOCAL_CURRENCY     Convert from foreign currency to local currency
DATE_CHECK_PLAUSIBILITY     Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
DATE_COMPUTE_DAY     Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_GET_WEEK     will return the week that a date is in.
DATE_IN_FUTURE     Calculate a date N days in the future.
DAY_ATTRIBUTES_GET
Return useful information about a day. Will tell you the day of the week as a word (Tuesday), the day of the week (2 would be Tuedsay), whether the day is a holiday, and more.(provided by Francois Henrotte)
DOWNLOAD     download a file to the presentation server (PC)
DYNP_VALUES_READ     Read the values from a dynpro. This function can be used to read the values from a report's selection screen too (Another example).
DYNP_VALUES_UPDATE     Similar to DYNP_VALUES_READ, this function will allow the updating of fields on a dynpro. Very useful when you want to change a field based on the value entered for another field.
ENQUE_SLEEP     Wait a specified period of time before continuing processing.
ENQUEUE_ESFUNCTION     Lock an abap program so that it cannot be executed.
Example:
Set the parameters as follows:
RELID = 'ZZ'
SRTF2 = 0
SRTF = (your report name)
Please note that you should not use SY-REPID to pass your report name to the function. The value of SY-REPID will change as it is being passed to the function module, and will no longer hold the value of the calling report.
EPS_GET_DIRECTORY_LISTING     return a list of filenames from a local or network drive
EPS_GET_FILE_ATTRIBUTES     Pass in a filename and a path, and will return attributes for the file
F4_DATE     displays a calendar in a popup window and allows user to choose a date, or it can be displayed read only.
F4_IF_FIELD_VALUE_REQUEST     Use values from a DDIC table to provide a list of possible values. TABNAME and FIELDNAME are required fields, and when MULTIPLE_CHOICE is selected, more than one value can be returned.
F4IF_INT_TABLE_VALUE_REQUEST     F4 help that returns the values selected in an internal table. Very handy when programming your very own F4 help for a field.
Example:
data:
    begin of t_values occurs 2,
      value like kna1-begru,
    end of t_values,
    t_return like ddshretval occurs 0 with header line.
t_values = 'PAR*'.
append t_values.
t_values = 'UGG'.
append t_values.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield        = 'BEGRU'
            value_org       = 'S'
       tables
            value_tab       = t_values
            return_tab      = t_return
       exceptions
            parameter_error = 1
            no_values_found = 2
            others          = 3.
if sy-subrc = 0.
    read table t_return index 1.
    o_begru-low = t_return-fieldval.
    if o_begru-low = 'PAR*'.
      o_begru-option = 'CP'.
    else.
      o_begru-option = 'EQ'.
    endif.
    o_begru-sign = 'I'.
    append o_begru to s_begru.
else.
    o_begru = i_begru.
endif.
F4IF_SHLP_EXIT_EXAMPLE     documents the different reasons to use a search help exit, and shows how it is done.
F4IP_INT_TABLE_VALUE_REQUEST     This function does not exist in 4.6 and above. Use F4IF_INT_TABLE_VALUE_REQUEST instead.
FILENAME_GET     popup to get a filename from a user, returns blank filename if user selects cancel
FORMAT_MESSAGE     Takes a message id and number, and puts it into a variable. Works better than WRITE_MESSAGE, since some messages use $ as a place holder, and WRITE_MESSAGE does not accommadate that, it only replaces the ampersands (&) in the message.
FTP_COMMAND     Execute a command on the FTP server
FTP_CONNECT     Open a connection (and log in) to an FTP server
FTP_DISCONNECT     Close the connection (and log off) the FTP server
FU CSAP_MAT_BOM_READ     You can use this function module to display simple material BOMs. You cannot display BOM groups (for example, all variants of a variant BOM). as in transaction CS03. Current restrictions: You cannot display long texts. You cannot display sub-items. You cannot display classification data of BOM items for batches. You can only display one alternative or variant. You cannot enter an alternative for module CSAP_MAT_BOM_READ, so you always see alternative 01. The following example came from a posting on the SAP-R3-L mailing list.
Example:
data: begin of tstk2 occurs 0.
          include structure stko_api02.
data: end of tstk2.
data: begin of tstp2 occurs 0.
          include structure stpo_api02.
data: end of tstp2.
data: begin of tdep_data occurs 0.
         include structure csdep_data.
data: end of tdep_data.
data: begin of tdep_descr occurs 0.
         include structure csdep_descr.
data: end of tdep_descr.
data: begin of tdep_source occurs 0.
         include structure csdep_source.
data: end of tdep_source.
data: begin of tdep_order occurs 0.
         include structure csdep_order.
data: end of tdep_order.
data: begin of tdep_doc occurs 0.
         include structure csdep_doc.
data: end of tdep_doc.
data: flg_warning like capiflag-flwarning.
   call function 'CSAP_MAT_BOM_READ'
        exporting
             material   = 'MAT100'
             plant      = '0001'
             bom_usage = '1'
             valid_from = '20.12.1996'
           valid_to
        importing
             fl_warning = flg_warning
        tables
             t_stko       = tstk2
             t_stpo       = tstp2
             t_dep_data   = tdep_data
             t_dep_descr = tdep_descr
             t_dep_source = tdep_source
             t_dep_order = tdep_order
             t_dep_doc    = tdep_doc
        exceptions
             error      = 1.
Function Group GRAP is now obsolete.     SAP recommends using functions in function group SFES instead. Below is an overview of the changes.
G_SET_GET_ALL_VALUES     Fetch values from a set.
GET_CURRENT_YEAR     Get the current fiscal year.
Example:
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    BUKRS         = '1000'     " Company Code
    DATE          = SY-DATUM   " Date to find fiscal year for
IMPORTING
    CURRM         = w_currm    " Current Fiscal Month
    CURRY         = w_curry    " Current Fiscal Year
    PREVM         = w_prevm    " Previous Fiscal Month
    PREVY         = w_prevy.   " Previous Fiscal Year
GET_GLOBAL_SYMBOLS     Returns a list of all tables, select options, texts, etc for a program. Even includes the text definitions for the selection screen
GET_INCLUDETAB     Returns a list of all INCLUDES in a program
GET_JOB_RUNTIME_INFO
Get the current job number from a program. Also returns other useful info about the current job.
GUI_CREATE_DIRECTORY     Create a directory on the presentation server
GUI_DELETE_FILE     Replaces WS_FILE_DELETE. Delete a file on the presentation server
GUI_DOWNLOAD     Replaces WS_DOWNLOAD. Download table from the app server to presentation server
GUI_EXEC     Replaces WS_EXECUTE. Start a File or Program Asynchronously with WinExec
GUI_GET_DESKTOP_INFO     Replaces WS_QUERY. Delivers Information About the Desktop (client)
GUI_REMOVE_DIRECTORY     Delete a directory on the presentation server
GUI_RUN     Start a File or Program Asynchronously with ShellExecute
GUI_UPLOAD     Replaces WS_UPLOAD. Upoad file from presentation server to the app server
HELP_START     Display help for a field. Useful for doing AT SELECTION SCREEN ON VALUE REQUEST for those fields that do not provide F4 help at the DDIC level.
HELP_VALUES_GET_WITH_TABLE     Show a list of possible values for F4 popup help on selection screens. This function module pops up a screen that is just like all the other F4 helps, so it looks like the rest of the SAP system. Very useful for providing dropdowns on fields that do not have them predefined.
Example:
tables: t001w.
DATA: lc_werks      LIKE t001w-werks,
      ltab_fields LIKE help_value OCCURS 0 with header line,
      BEGIN OF ltab_values OCCURS 0,
        feld(40) TYPE c,
      END OF ltab_values.
*-- Set up fields to retrieve data
ltab_fields-tabname    = 'T001W'.
ltab_fields-fieldname = 'WERKS'.
ltab_fields-selectflag = 'X'.
APPEND ltab_fields.
ltab_fields-tabname    = 'T001W'.
ltab_fields-fieldname = 'NAME1'.
ltab_fields-selectflag = space.
APPEND ltab_fields.
*-- Fill values
select * from t001w.
    ltab_values-feld = t001w-werks.
    append ltab_values.
    ltab_values-feld = t001w-name1.
    append ltab_values.
endselect.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
     EXPORTING
          fieldname                 = 'WERKS'
          tabname                   = 'T001W'
          title_in_values_list      = 'Select a value'
     IMPORTING
          select_value              = lc_werks
     TABLES
          fields                    = ltab_fields
          valuetab                  = ltab_values
     EXCEPTIONS
          field_not_in_ddic         = 01
          more_then_one_selectfield = 02
          no_selectfield            = 03.
HOLIDAY_CHECK_AND_GET_INFO     Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the date is a holiday by checking the parameter HOLIDAY_FOUND.
Example:
data: ld_date                 like scal-datum default sy-datum,
      lc_holiday_cal_id       like scal-hcalid default 'CA',
      ltab_holiday_attributes like thol occurs 0 with header line,
      lc_holiday_found        like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
    date                               = ld_date
    holiday_calendar_id                = lc_holiday_cal_id
    WITH_HOLIDAY_ATTRIBUTES            = 'X'
IMPORTING
    HOLIDAY_FOUND                      = lc_holiday_found
tables
    holiday_attributes                 = ltab_holiday_attributes
EXCEPTIONS
    CALENDAR_BUFFER_NOT_LOADABLE       = 1
    DATE_AFTER_RANGE                   = 2
    DATE_BEFORE_RANGE                  = 3
    DATE_INVALID                       = 4
    HOLIDAY_CALENDAR_ID_MISSING        = 5
    HOLIDAY_CALENDAR_NOT_FOUND         = 6
    OTHERS                             = 7.
if sy-subrc = 0 and
   lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
HOLIDAY_GET     Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HR_DISPLAY_BASIC_LIST     is an HR function, but can be used for any data. You pass it data, and column headers, and it provides a table control with the ability to manipulate the data, and send it to Word or Excel. Also see the additional documentation here.
HR_GET_LEAVE_DATA     Get all leave information (includes leave entitlement, used holidays/paid out holidays)
HR_IE_NUM_PRSI_WEEKS     Return the number of weeks between two dates.
HR_PAYROLL_PERIODS_GET
Get the payroll period for a particular date. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
        IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
       EXPORTING
            get_begda       = w_begda
       TABLES
            get_periods     = it_t549q
       EXCEPTIONS
            no_period_found = 1
            no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
       EXPORTING
            get_pernr             = w_pernr
            get_pabrj             = it_t549q-pabrj
            get_pabrp             = it_t549q-pabrp
       TABLES
            get_zl                = it_zl
       EXCEPTIONS
            no_period_specified   = 1
            wrong_cluster_version = 2
            no_read_authority     = 3
            cluster_archived      = 4
            technical_error       = 5.
NOTE: it_zl-iftyp = 'A'   absence
      it_zl-iftyp = 'S'   at work
HR_TIME_RESULTS_GET
Get the time results for a payroll period. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
        IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
       EXPORTING
            get_begda       = w_begda
       TABLES
            get_periods     = it_t549q
       EXCEPTIONS
            no_period_found = 1
            no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
       EXPORTING
            get_pernr             = w_pernr
            get_pabrj             = it_t549q-pabrj
            get_pabrp             = it_t549q-pabrp
       TABLES
            get_zl                = it_zl
       EXCEPTIONS
            no_period_specified   = 1
            wrong_cluster_version = 2
            no_read_authority     = 3
            cluster_archived      = 4
            technical_error       = 5.
NOTE: it_zl-iftyp = 'A'   absence
      it_zl-iftyp = 'S'   at work
INIT_TEXT     To load long text into SAP
K_WERKS_OF_BUKRS_FIND     Return a list of all plants for a given company code.
LIST_FROM_MEMORY     Retrieves the output of a report from memory when the report was executed using SUBMIT... EXPORTING LIST TO MEMORY. See also WRITE_LIST.
LIST_TO_ASCII     convert an ABAP report (displayed on screen) from OTF to ASCII format
MBEW_EXTEND
Get the stock position for the previous month. This displays the same info that you see in MM03.
MONTH_NAMES_GET     It returns all the month and names in repective language.
MONTH_PLUS_DETERMINE     Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
Example:
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
    months        = -5       " Negative to subtract from old date, positive to add
    olddate       = sy-datum
IMPORTING
   NEWDATE       = new_date.
write: / new_date.
MS_EXCEL_OLE_STANDARD_OLE     will build a file, and automatically start Excel
OTF_CONVERT     wraps several other function modules. Will convert OTF to ASCII or PDF
POPUP_TO_CONFIRM_LOSS_OF_DATA     Create a dialog box in which you make a question whether the user wishes to perform a processing step with loss of data.
POPUP_TO_CONFIRM_STEP     Create a dialog box in which you make a question whether the user wishes to perform the step.
POPUP_TO_CONFIRM_WITH_MESSAGE     Create a dialog box in which you inform the user about a specific decision point during an action.
POPUP_TO_CONFIRM_WITH_VALUE     Create a dialog box in which you make a question whether the user wishes to perform a processing step with a particular object.
POPUP_TO_DECIDE     Provide user with several choices as radio buttons
POPUP_TO_DECIDE_WITH_MESSAGE     Create a dialog box in which you inform the user about a specific decision point via a diagnosis text.
POPUP_TO_DISPLAY_TEXT     Create a dialog box in which you display a two line message
POPUP_TO_SELECT_MONTH     Popup to choose a month
POPUP_WITH_TABLE_DISPLAY     Provide a display of a table for user to select one, with the value of the table line returned when selected.
PRICING     Return pricing conditions in an internal table. Use structure TCOMK for parameter COMM_HEAD_1, and structure TCOMP for parameter COMM_ITEM_1, and set CALCULATION_TYPE to B. The pricing conditions will be returned in XOMV. You must fill TCOMP, and TCOMK with the appropriate values before callling the function in order for it to work.
PROFILE_GET     Read an Entry in an INI File on the frontend
PROFILE_SET     Write an Entry in an INI File on the frontend
READ_TEXT     To load long text into SAP
REGISTRY_GET     Read an Entry from the Registry
REGISTRY_SET     Set an entry in the Registry
RFC_ABAP_INSTALL_AND_RUN     Runs an ABAP program that is stored in the table PROGRAM when the MODE = 'F'. Table WRITES contains the ouput of the program. Allows you to run a program without having the source code in the target system.
RH_GET_ACTIVE_WF_PLVAR     Return the active HR Plan
RH_GET_DATE_DAYNAME     return the day based on the date provied
RH_START_EXCEL_WITH_DATA     starts Excel with the contents of an internal table. This function finds Excel in the desktop registry. It also uses a local PC working directory to save the file (that's what the 'W' value for data path flag does). Very transparent to user!
RH_STRUC_GET     Returns all related org info
RHP0_POPUP_F4_SEARK
is a matchcode for any type of HR Planning object, including the possibility to fill the field that you want
Example:
Examples: search for any organizational structure
           F4 = 'X'
           PLVAR = '01'
           OTYPE = 'O '
          search for any persons
           F4 = 'X'
           PLVAR = '01'
           OTYPE = 'P '
           MULTI_SELECT = 'X' to allow multiple selection
           EASY = 'X' for user-dependent matchcode
Unfortunately, the use of table BASE_OBJIDS is disabled, so you can't specify
a root for the hierarchy you display
RKD_WORD_WRAP     Convert a long string or phrase into several lines.
RP_CALC_DATE_IN_INTERVAL     Add/subtract years/months/days from a date
RP_LAST_DAY_OF_MONTHS     Determine last day of month
RPY_DYNPRO_READ     Read dynpro, including screen flow
RPY_TRANSACTION_READ     Given a transaction, return the program and screen or given a program and screen, return the transactions that use the program and screen.
RS_COVERPAGE_SELECTIONS     Returns an internal table that contains a formatted list of all the selection parameters entered for a report. Table is ready to print out.
RS_REFRESH_FROM_SELECTOPTIONS     Get the current contents of selection screen
RS_SEND_MAIL_FOR_SPOOLLIST     Send message from ABAP/4 program to SAPoffice.
RS_VARIANT_CONTENTS     Returns the contents of the specified variant in a table.
RSPO_DOWNLOAD_SPOOLJOB     Download the spool from a program to a file. Requires spool number.
RSPO_RETURN_ABAP_SPOOLJOB     Fetch printer spool according to the spool number informed.
RZL_READ_DIR     If the server name is left blank, it reads a directory from local presentation server, otherwise it reads the directory of the remote server
RZL_READ_DIR_LOCAL     Read a directory on the Application Server
RZL_READ_FILE     Read a file from the presentation server if no server name is given, or read file from remote server. Very useful to avoid authority checks that occur doing an OPEN DATASET. This function using a SAP C program to read the data.
RZL_SLEEP     Hang the current application from 1 to 5 seconds.
RZL_SUBMIT     Submit a remote report.
RZL_WRITE_FILE_LOCAL     Saves table to the presentation server (not PC). Does not use OPEN DATASET, so it does not suffer from authority checks!
SAP_CONVERT_TO_XLS_FORMAT     Convert data to Microsoft Excel format.
SAPGUI_PROGRESS_INDICATOR     Display a progress bar on the SAP GUI, and give the user some idea of what is happening
SAVE_TEXT     To load long text into SAP
SCROLLING_IN_TABLE     If you are coding a module pool and using a table control, you can use this function SCROLLING_IN_TABLE to handle any scrolling. (provided by Paul Kjaer)
SD_DATETIME_DIFFERENCE     Give the difference in Days and Time for 2 dates
SO_NEW_DOCUMENT_ATT_SEND_API1     Send a document as part of an email. The documentation is better than normal for this function, so please read it.
SO_SPLIT_FILE_AND_PATH     Split a fully pathed filename into a filename and a path.
SO_SPOOL_READ     Fetch printer spool according to the spool number informed. See also RSPO_RETURN_ABAP_SPOOLJOB
SO_WIND_SPOOL_LIST     Browse printer spool numbers according to user informed.
SWD_HELP_F4_ORG_OBJECTS
HR Matchcode tailored for organizational units. Includes a button so that you can browse the hierarchy too.
SX_OBJECT_CONVERT_OTF_PDF     Conversion From OTF to PDF (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_PRT     Conversion From OTF to Printer Format (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_RAW     Conversion From OTF to ASCII (SAPScript conversion)
SXPG_CALL_SYSTEM     you can check the user's authorization for the specified command and run the command. The command runs on the host system on which the function module is executed. The function module is RFC capable. It can therefore be run on the host system at which a user happens to be active or on another designated host system at which an R/3 server is active.
SXPG_COMMAND_CHECK     Check whether the user is authorized to execute the specified command on the target host system with the specified arguments.
SXPG_COMMAND_DEFINITION_GET     Read the definition of a single external OS command from the R/3 System's database.
SXPG_COMMAND_EXECUTE     Check a user's authorization to use a command, as in SXPG_COMMAND_CHECK. If the authorization check is successful, then execute the command on the target host system.
SXPG_COMMAND_LIST_GET     Select a list of external OS command definitions.
TERMINAL_ID_GET     Return the terminal id
TH_DELETE_USER     Logoff a user. Similar results to using SM04.
TH_ENVIRONMENT     Get the UNIX environment
TH_POPUP     Display a popup system message on a specific users screen.
TH_REMOTE_TRANSACTION     Run a transaction on a remote server. Optionally provide BDC data to be used in the transaction
TH_USER_INFO     Give information about the current user (sessions, workstation logged in from, etc)
TH_USER_LIST     Show which users are logged into an app server
TMP_GUI_DIRECTORY_LIST_FILES     Retrieve all of the files and subdirectories on the Presentation Server (PC) for a given directory.
When a value other than * or . is used for the filter, you will not get any directories, unless they match your wildcard filter. For example, if you entered *.png, then only files and directories that end in png will be returned by the function.
Example:
data: lc_directory         like bdschko16-target_dir value 'C:\TEMP\',
       lc_filter(20)        type c default '.'.
       li_file_count        type i,
       li_dir_count         type i,
       ltab_dir_table       like sdokpath occurs 0 with header line,
       ltab_file_file_table like sdokpath occurs 0 with header line.
call function 'TMP_GUI_DIRECTORY_LIST_FILES'
exporting
    directory        = lc_directory
    filter           = lc_filter importing
    file_count       = li_file_count
    dir_count        = li_dir_count
tables
    file_table       = ltab_file_table
    dir_table        = ltab_dir_table
exceptions
    cntl_error       = 1
    others           = 2.
UNIT_CONVERSION_SIMPLE     convert weights from one UOM to another.
UPLOAD     upload a file to the presentation server (PC)
UPLOAD_FILES     Will load one or more files from app or presentation server
WEEK_GET_FIRST_DAY     For a given week (YYYYMM format), this function returns the date of the Monday of that week.
WRITE_LIST     Useful for writing out the list contents that result from the function LIST_FROM_MEMORY.
WS_DOWNLOAD     Save Internal Table as File on the Presentation Server
WS_EXCEL     Start EXCEL on the PC
WS_EXECUTE     execute a program on a windows PC
WS_FILE_DELETE     Delete File at the Frontend
WS_FILENAME_GET     Call File Selector
WS_MSG     Create a dialog box in which you display an one line message
WS_UPLOAD     Load Files from the Presentation Server to Internal ABAP Tables
WS_VOLUME_GET     Get the label from a frontend device.
WWW_LIST_TO_HTML     After running a report, call this function to convert the list output to HTML.
hope it will help you
regards
sreelatha gullapalli

Create Material Master Record with Text

Hi, I am looking to create material Master Data via ABAP. I currently have some code that creates the Master Data Characteristic value I want, but I need the text as well. Can someone tell me what I need to do to add the text for the Master Data Characteristic value?
Here's what I have using CL_RSDMD_UPDATE_MASTER_DATA=>UPDATE_ATTRIBUTES_STATIC
TYPE-POOLS: RS, RSSM.
DATA: T_ZFREETEXT   LIKE STANDARD TABLE OF ZFREETEXT.
DATA: T_INFO        TYPE RSSM_S_MINFO.
DATA: RETURN_STATUS TYPE RSARR_T_IDOCSTATE.
DATA: RETURN_SUBRC LIKE SY-SUBRC.
DATA: MSG TYPE RS_T_MSG.
DATA: L_R_ACTIVATE_MASTER_DATA TYPE REF TO CL_RSDMD_ACTIVATE_MASTER_DATA.
INSERT ZFREETEXT INTO TABLE T_ZFREETEXT.
CALL METHOD CL_RSDMD_UPDATE_MASTER_DATA=>UPDATE_ATTRIBUTES_STATIC
    EXPORTING
      I_IOBJNM        = '0MATERIAL'     " Technical name of InfoObject
      I_CHAVL_ENQUEUE = RS_C_FALSE
      I_T_DATA        = T_ZFREETEXT
      I_S_MINFO       = T_INFO
      I_MONITORING    = RS_C_FALSE
    CHANGING
      C_T_IDOCSTATE   = RETURN_STATUS.
IF SY-SUBRC <> 0.
    RETURN_SUBRC = 'Error happened'.
ELSE.
    RETURN_MSG = 'Process Completed Successfully'.
    CREATE OBJECT L_R_ACTIVATE_MASTER_DATA
      EXPORTING
        I_IOBJNM            = '0MATERIAL'
        I_P_Q_HAVE_TO_EXIST = RS_C_FALSE.
    IF SY-SUBRC = 0.
      L_R_ACTIVATE_MASTER_DATA->ACTIVATE(
      IMPORTING
      E_SUBRC = RETURN_SUBRC
      CHANGING
      C_T_MSG = MSG ).
    ENDIF.
ENDIF.

Dear Kenneth,
do you need to add master data during load of transaction data in planning scenario? If yes, you can do this with a planning function of type exit in the INIT function module.
I think you've to use the table ETO_CHAS (table for char. combinations) and all kind of char. combinations has to be transfered.
data:
l_s_chas type /1SEM/_YS_CHAS_"YOURCLIENT"YOURPLANNINGAREA",
l_r_co_area type range of /bi0/oico_area,
l_s_costcenter type /bi0/pcostcenter.
field-symbols:
<f_coar> type /bi0/oico_area,
<f_cctr> type /bi0/oicostcenter.
select * from /bi0/pcostcenter into l_s_costcenter
             where co_area IN l_r_co_area
             and objvers = 'A'.
<f_coar> = l_s_costcenter-co_area.
<f_cctr> = l_s_costcenter-costcenter.
INSERT l_s_chas INTO TABLE eto_chas.
endselect.
Regards, Clemens

LSMW--Create Material master data

Hi,
When I use LSMW to create material master data, I set up all step, but when I go to last step "13 Run Batch Input Session", there is error message like "Select at least one view" in moudle SAPLMGMM, screen 0070, anybody can tell me what is problem, thanks a lot.

Hi,
This is due to error while recording for MM01,
Please do a Repeat recording and ensure that once the material number, industry sector and material type is entered, on the next screen you need to select all or at least a single view to create the MMR.
Regards
Merwyn

Is it possible to Create Material Master without Profit Center ?

Hai,
      1) Is it possible to Create Material Master without Profit Center ?
      2) How SAP System Validate Profit Center in material master. ? is it material Type wise ?
      3) Whether PO Order Creation,GRN & MIRO Possible for those material Master without Profit Center.?
Kindly Explain me clearly..
Thanks & Regards,
Swetha

Hi,
Profit center is at the plant level.
You can create material master even with out a profit center.This field will be there in the costing view and and general sales/plant data.
while creation of the materila master if do not select these views system will not ask for that.Normally it is pertaining to the costing analysis.
A profit center manager is held accountable for both revenues, and costs (expenses), and therefore, profits. What this means in terms of managerial responsibilities is that the manager has to drive the sales revenue generating activities which leads to cash inflows and at the same time control the cost (cash outflows) causing activities. This makes the profit center management more challenging than cost centre management. Profit center management is equivalent to running an independent business because a profit center business unit or department is treated as a distinct entity enabling revenues and expenses to be determined and its profitability to be measured.
Business organizations may be organized in terms of profit centers where the profit center's revenues and expenses are held separate from the main company's in order to determine their profitability. Usually different profit centers are separated for accounting purposes so that the management can follow how much profit each center makes and compare their relative efficiency and profit. Examples of typical profit centers are a store, a sales organization and a consulting organization whose profitability can be measured.
For more info,please refer
http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/36428094f311d2b47a006094b9b0a5/frameset.htm,
Regards,

Unable to create material master

Hi
I tried creating material master using tcode MM01. I have done the basic config to start using MM (i am a FICO guy).
When i create the material master, and try to save, it opens another window of "ABAP Debugger Controls Session" and I am not sure what to do there...when i exit from the debugger screen, it takes me back to SAP Easy Access Menu...
any idea guys why this error is coming.
thanks
Vikash

Hi,
You should get your ABAPer to sit down with you while you are maintaining material master creation and once the same error was encountered, you shall ask them to turn off the 'debugging mode' of the related program.
Cheers,
HT

How to Create material master workflow

Hi All,
Can anybody tell me how to create material master workflow?
i need to customize the workitem for creating data in different views in MM01 transaction with restriction to particular user.
Regards,
Priti

Hi,
This link is to display a material.My requirement is to create a workflow which will allow a responsible person to enter data for specific department data e.g Purchase,Accounting etc.Initially anyone can create data using basic data1 and basic data2 views.After this my workflow will be triggered and it will go to next person who is responsible to enter Purchase data and then Accounting data.
Plz help me to create different views with respect to person.
Thanks in advance.

BAPI or FM Required to create Material Master

IS there any BAPI or Function module avaiable in SAP to create Material Master.
The following Two BAPIs uses Call transaction, which I dont want.
BAPI_RETAILMATERIAL_CREATE
BAPI_STANDARDMATERIAL_CREATE
Please let me know if any other Function module or BAPI Avaiable in the system.
Thanks
Aman

Yep, this one works pretty good.
call function 'MATERIAL_MAINTAIN_DARK'
         exporting
              sperrmodus                = ' '
              kz_prf                    = 'W'
              max_errors                = ' '
              p_kz_no_warn              = 'X'
              kz_verw                   = 'X'
              kz_aend                   = 'X'
              kz_dispo                  = 'X'
              kz_test                   = ' '
              flag_muss_pruefen         = ' '
              call_mode                 = 'ACT'
         importing
              number_errors_transaction = numerror
              matnr_last     = last_matnr
         tables
             amara_ueb      = i_mara    "Basic Data
*             amakt_ueb      = i_makt    "Descriptions
             amarc_ueb      = i_marc    "Plant
*             amard_ueb      = i_mard    "Storage Location
*            AMFHM_UEB      = I_MFHM    "Production Tools
*             amarm_ueb      = i_marm    "Units of Measure
*            AMEA1_UEB      = I_MEA1    "Internal Mangagement - EANs
*             ambew_ueb      = i_mbew    "Accounting/Costing
*             asteu_ueb      = i_steu    "Tax Data
*             astmm_ueb      = i_steumm "Tax Data
*            AMLGN_UEB      = I_MLGN    "Warehouse Data
*            AMLGT_UEB      = I_MLGT    "Storage Type Data
*            AMPGD_UEB      = I_MPGD    "Change Documents
*            AMPOP_UEB      = I_MPOP    "Forcast Parameters
*            AMVEG_UEB      = I_MVEG    "Total Consumption Data
*            AMVEU_UEB      = I_MVEU    "Unplanned Consumption Data
*             amvke_ueb      = i_mvke    "Sales Data
*             altx1_ueb      = i_ltx1    "Sales Text
*            AMPRW_UEB      = I_MPRW    "Forcast Values
             amfieldres     = i_delfields
             amerrdat       = i_errors
         exceptions
              kstatus_empty             = 01
              tkstatus_empty            = 02
              t130m_error               = 03
              internal_error            = 04
              update_error              = 05
              too_many_errors           = 06.
Regards,
Rich Heilman

10 digit code need to be created while creating material master

Hi, Please advise how to create a 10 digit code automatically when we create material master in SAP? Please note that this code is required as one of the basic data view fields, not as material code. Is there any enhancements available for the same.

Dear
Try to use Product Hierarchy field MARA-PRDHA in the Material Master for this purpose
Regards
JH

Set default value for price unit when creating material master data

HI: Every
could you tell me how to use user-exit or else ways to set default value(such as 1000) for field "Price unit" (MBEW-PEINH) when creating material master data(MM01)?
I have try to use Exit:EXIT_SAPLMGMU_001. However, this way cannot respones it.
thanks
Henry

Hi: Ihave find out a solution
Use BADI: BADI_MATERIAL_REF
SPROlogistics general enhancement supplement or change default data (industry)
And then creating a Implementation Name
Double click method: CREATE_MATERIAL
And then write code as below:
method IF_EX_MATERIAL_REFERENCE~CREATE_MATERIAL.
c_mbew-peinh = '1000' .
endmethod.
However, SAP still store '1000' in database evenif we change the default value such as 100 when we use TCode MM01.
in additional, we still use MM02 to change the default value such as '100'
can anybody tell me how to do?
thanks
Henry

MDM Material Master data creation using Guided Procedures

Well, i searched a lot on the forums but didnt get any thing.
My requirement is to use MDM Java APIs for creating material master data using Guided Procedures. However, i got one nice document "[How to create master data centrally using guided procedure|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92811997-0d01-0010-9584-f7d535177831]". This doc discuss about business partner creation and also have a link to downloadable file. But now when i click on this download link, it says download expired !
Can anyone please post a valid link to these deployable files?
Or anyone could post some usefull materail or links on the above mentioned requirement?
Kindly reply, any help will be highly appreciated.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Sep 27, 2008 11:29 AM

Wow, that was indeed a quick reply i have ever got on SDN. Thanks for the excellent link jitesh. However, where will i get the deployable files that it selects in the Import GP/CAF contents step of the demo? those are the webdynpro components files. One is SCA and other is SDA. Where will i get them?
Kindly post the link to those files if u have them or else send it across.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Sep 27, 2008 11:53 AM

Create Material Master Revision Level using CC02

Similar Messages

Maybe you are looking for