Create supplier button not visible

Hi Gurus
We are running r12 on solaris 5.10. We have one custom responsibility "KGL AP Superuser".
Previously we had a option of “Create Supplier” option under KGL AP Superuser--> supplier --> Entry. Now that option is not visible. But It is there is TEST CLONE. How do I enable or visible this in PRODUCTION.
Regards
Musaddaq

Hi Bob,
Thanks for your response. Could you please let me know where can i find steps or video to create application in windows.
Vjay

Similar Messages

  • Help button not visible in off-line version

    Why is de help/information button not visible in the off-line version. The web-based version is oké. In use Adobe Accrobat version XI.

    if you use the off-line version, Formscentral AIR Application, help menu will bring you to the help page. For example: DE http://help.adobe.com/de_DE/formscentral/using/index.html

  • Reset button not visible in settings, help?

    Reset button and security button not visible in general settings on my iphone 4 . How do I restore them?

    if you use the off-line version, Formscentral AIR Application, help menu will bring you to the help page. For example: DE http://help.adobe.com/de_DE/formscentral/using/index.html

  • Approve Button not visible in Tasks for Leave request in Tasks- MSS

    Dear gurus,
    Approve Button not visible in Tasks for Leave request in Tasks- MSS, anything missing on config end????
    Any suggestions....
    regards,
    Rajasekar.

    hello Bala,
    there was some config missing in UWL, now it is working and here we have got some button launch dynpro ..this is leading to pop where we can approve or reject....
    Thanks alot Bala..
    In this we are getting more info, Display details in SAP GUI, View History, View all Time Approval and Attachments of Documents which leads to leave request details. These may be too flashy for the Manager who are from the typcial production centers....industries...So is there any way out for Hiding these.
    Regards,
    Raj

  • Interview, Contact  etc buttons not visible on Hiring Applicants Form

    Hi,
    Interview, Qualifications, Schools & Colleges, Contact buttons not visible on Hiring Applicants Form.
    Is there any profile option , so that the above mentioned buttons are visible ?
    Thanks,
    Angelica.

    Hi Jhansi,
    Thanks for the reply.
    We tried the mentioned steps, but unable to view the required buttons.
    Can you let me know if there is any profile option for the same, cause we are able to view the button in another instance, but not in the one that we are working on.
    Thanks,
    Angelica.

  • Message mapping (data flow editor, data dependcies  buttons not visible)

    Hi,
    In my SAP PI...IR ...in message mapping screen some buttons are not enable/visible like
    data flow editor, data dependcies,clear mapping  buttons not visible)
    any oss notes/help will be appreciated.
    Thanks

    Hi,
    This will help you
    /people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
    Go for 1.4.X version than 1.6.X The Problem will be resolved
    Regards
    Sangeetha

  • "Create Interactive Dashboard" button not visible

    Hi,
    For Administrator, under Manage Interactive Dashboards link, the "Create Interactive Dasboard" button is not visible. Where should it be configured.
    Regards,
    Sreekanth.

    Got it, i didnt create any shared folder!! :)
    thanks,
    Sreekanth.

  • SRM-SUS: "Create Invoice" button not available in "Confirmation"

    A confirmation is created from SUS(702) and posted to ECC (607). Service Entry sheet is released in ECC.
    Supplier unable to see the "Create Invoice" button in the confirmation. Please advise what could be missing here?
    Is there any status update to Confirmation about the acceptance of service entry. I can see a Service-acknowledgement is posted into SUS but is not visible in the SUS portal.

    Hi,
    Did you check whether 'GR based IV' is clicked for respective vendor?
    Regards,

  • Push button not visible in Quality

    Hi,
    We have created one push button for the tcode fbl1n and fbl5n using the standard BADi  "FI_ITEMS_MENUE01".
    Now, the problem is the button is visible in Development server but not in Quality server.
    We have checked the version management but the code is very much visible in Quality.
    But, the push button is not visible in the Quality.
    Could anyone please provide with a solution to this problem.
    Thanks in advance,
    Kalyani.

    Hi,
    We have transported the Class name as well as BADi name to Quality.
    The implemented code along with the Fcode is visible in Quality.
    But while executing the tcodes FBL1N and FBL5N the push button which was implemented, is not visible in Quality.
    Thanks,
    Kalyani

  • SQL Expression Fields button not visible in Field Explorer

    Hi,
    On my Crystal Reports installation I can see the button SQL Expression Fields in Field Explorer but it is not visible on client's installation.
    How do I make it visible? I need to create a new report with SQL query for client.
    Thanks,
    Ajay Audich

    Commands are intended to replace the standard linked tables that must users are accustomed to.
    I suppose Commands would be considered an "advanced" feature, considering that they require the developer to be able to hand write SQL (our at least copy it from another SQL editor).
    If you are comfortable writing reading, writing & editing SQL, Commands will open a the door to a whole new level of control when it comes to creating your data sets.
    The biggest problem w Commands is also it's greatest strength... If you're using a Command, CR will assume that you know what you're doing and will not try to rewrite or optimize your SQL in the background. You write it, CR sends it. That means if you write crappy SQL, CR will send your crappy SQL to the db server...
    It also means that you can use join types that aren't available in CR and use sub-queries in in your SQL... Basically anything you can do in the db's native editor.
    HTH,
    Jason

  • OK button not visible in popup dialog box.

    Hi,
    There is some problem with the popup dialog boxes that I am using. Sometimes I can see the OK button while sometimes it is not visible.
    Any clue regarding this odd behaviour?
    Many Thanks,
    Anagha

    HI everybody,
    I am also having similar error now.
    IN the standard Dialog box, I am not able to get the button, despite of doing everything properly.
    Please find the code used:
    IWDControllerInfo conInfo= wdThis.wdGetAPI().getControllerInfo();
                                  IWDEventHandlerInfo evntInfo = conInfo.findInEventHandlers("Ok");
                                  IWDConfirmationDialog confDialog =wdComponentAPI.getWindowManager().createConfirmationWindow("Please Enter a search Criteria", evntInfo , "OK");
                                  confDialog.setTitle("Confirmation Window");
                                  confDialog.open();
    I  have created the eventhanler.
    I tried all possible ways but nothing has resolved the issue.
    The only difference is that I need to place this code in custom controller only.

  • Park button not visible in F-63 screen

    Hi,
    I created a role that will alllow a user to park the document using F-63. In DEV it's working fine however when I transported it to PRD. The Park Document button (SAVE) is not visible or deactivated in F-63 screen in PRD.
    Any help is much appreciated? Thanks.
    Regards,
    Threadstone

    Hi Threadstone,
    The GUI-Status ZBVV has got the save-Button PBBP, but the display of it can be excluded.
    You can see what happens, when you set a break-point in function Group F040 (Transaction SE80, Function group, F040, PBO-Module, Status_setzen_zbv, click left of line-number of the line “if yfuncl eq ’P’.”):
    module status_setzen_zbv output.
      tables: with_item.
    *------- Standard-Status -----------------------------------------------
      if yfuncl eq 'P'.
        status = 'ZBB'.
      elseif yfuncl eq char_r.
        status = 'ZBF'.
      else.
        status = 'ZBV'.
        if rfopt2-xcmpl eq char_x.
          status+3(1) = char_v.
        endif.
      endif.
    *------- STATUS setzen -------------------------------------------------
      perform status_setzen.
    endmodule.   
    Another Break-point might be set in subroutine “extab_fuellen” where functions are appended which shall not be used.
    form exctab_fuellen.
      refresh exctab.
      if bseg-koart ne char_k and
         bseg-koart ne char_d                                   "/N394306
      or ( bseg-koart = char_k and lfa1-xzemp is initial )      "/N394306
      or ( bseg-koart = char_d and kna1-xzemp is initial ).     "/N394306
        exctab-okcod = 'ZEMP'.
        append exctab.
      endif.
      if yfuncl eq char_d or
         yfuncl eq char_r.
        exctab-okcod = 'BP'.
        append exctab.
        exctab-okcod = 'PBBP'.
        append exctab.
    Yfuncl has got value D (display) or R (release). It can be, that the user has not got the authority for saving. Please check SU53 or via ST01.
    Regards Wolfrad

  • Performance Management: 'Share with Main Appraiser' button not visible

    Hi Gurus,
    I am using Oracle R12.1.3, Performance Management module.
    I am trying to publish Performance Management Plan with Objective setting and Appraisals both tasks. Appraisal plan is set to be appraisee initiated, standard appraisal
    However - When the appraisee is trying to initiate the appraisal (by clicking 'Update' on the appraisal task appeared) - s/he sees all the objectives set and get to choose a performance rating. However - the button 'Share with Main Appraiser' button is not visible.
    When I am trying to create a Performance Management Plan with only 'Appraisals' - this problem is not occurring. Any clue as to how to rectify this problem?
    PS - I have tried disabling personalizations and re-tried several times - but the same error occurs.
    Would really appreciate any response which might help.
    Thanks and Regards,
    Rahul

    I'm thankful for your effort Hussein. However, this document is applicable for version 12.1.4+ while I am working on 12.1.3. I re-tested the thing after making some changes in appraisal template where I ticked 'Update Appraisals for Terminated Workers' and also checking 2 more related check-boxes. Surprisingly it worked.
    Also if I am selecting method for objective allocation as 'Parallel' - then also this error is not occurring - even with old appraisal template. Although this hit and trial worked, I do not have a logical view about the solution and correctness in all environments yet.

  • Salesorder created using BAPI_SALESORDER_CREATEFROMDAT2 not visible in VBAK

    Hi Experts,
    I created sales order using BAPI_SALESORDER_CREATEFROMDAT2, further salesorder ID was also indicated after creation.
    But the same order ID is not visible in SD standard table VBAK.
    Pls guide me to a valid standard CREATE BAPI for Sales order.
    Regards,
    Romi Malik

    Hi Romi,
    If you created a document through BAPI and it does not appear in the database afterwards, the logical conclusion is that ...
    No it wasn't really created
    With BAPIs for sales order data loading, there is no automatic COMMIT! (check SAP notes).
    You need to add the call to BAPI BAPI_TRANSACTION_COMMIT to save to DB.
    Regards,
    Franck

  • Photo gallery menu button not visible (black on bl...

    Lately (I don't know when it changed because before it was not like this) there is some strange behavior on my N8 when viewing photos in the gallery.
    If I chose a photo to view and then tap on screen to get the options I don't see the two buttons at the bottom of the screen (Options and Back buttons). I found out that the buttons are present but they are in black - meaning they are not visible if there is no picture covering those parts of the screen (see attached photos). They are only visible if the background is very bright (white).
    Is there any settings to change this annoyance?
    P.S. The same is true if I open pictures in Photo Editor.
    Attachments:
    P1050880.JPG ‏1634 KB
    P1050881.JPG ‏2361 KB

    Okay, I've tried .ac3 audio and I get the same result.
    I had a friend of mine try this test. He had two different Progressive scan DVD players. It played perect on one and showed these errors on the other (the audio not playing and the text appearing in a different font). He said it had somthing to do with the progressive scan settings of the player. One player could switch to this type of DVD and the other one could only do it manually in the menu screen. He said that even hollywood DVDs do this on these types of DVD players. Since I have NEVER seen this problem before what could he be talking about? And why would previous versions of DVD's that I have made in DVD Studio Pro 1, 1.5 and 2 work fine on these same DVD players?
    This is driving me nuts. Why would one DVD player play the DVD perfect and another one play the video fine, but mess up the audio and text buttons on the menu?
    Other people I have talked to stay that it may be the media it is burned to, but I'm using the same DVD media that I have always used?
    Please help!

Maybe you are looking for

  • MR11 Maintain GR/IR Clearing Account

    Im trying to post a PO order through transaction MR11 and the systme show me the following message: Field Cost ctr is a required field for G/L account XXXX 4161302. The value for field "Cost ctr" in the interface to Financial Accounting is an initial

  • Forwarding E-mail and those stupid lines

    is there anyway to get rid of those stupid lines on the side of the e-mail when I forward things? In Outlook on my old PC, you just forwarded and cleaned it up and it looked like an original. How do i get rid of the green and brown lines that come on

  • Adding label for the total value shown

    Hi, I'd like to add a label to the report's grand total row. Let us say I've a report that shows the count of all employees and the sum of their salaries reporting to a particular manager 'ABC' in a particular location say 'UK', so I've a grouping by

  • [Weblogic 11G] FrontEnd Average Response time exploded

    --- windows server 2008 R2 --- weblogic 10.3.2 --- Sun JVM 1_6 Good morning, We have an web app (war archive contained in an ear) deployed on weblogic cluster (2 managed nodes). This application is monitored through Wily Introscope and regularly I ca

  • Simulation using animation

    i am trying to create a applet to simulate the TCP/IP protocol suite. I want to have two computers on screen with messages going between them. One computer will send a message and the other will send an acknowledgement back, this will have a counter