Create T.O using outbound delivery. Need to update the storage type.

Hi All,
I am using L_TO_CREATE_DN to create a T.O using an outbound delivery. It creates the T.O. But I need to decide at the time of creating the T.O the storage type to be used.
I tried using the F.M L_TO_CREATE_MULTIPLE but that does not update the Delivery flow.
I have already gone over the discussions on forums for L_TO_CREATE_DN but none seem to answer the question of updating the line items of the transfer order yet.
I was hoping someone could help me out with this.
Thanks,
Arup

Hey,
Well I do not need to be worried about the storage bins as that is a selection based on a FIFO strategy. It is returned by the system.
I need to worry about the storage type.
So here is the complete requirement.
I have to create TO's for LM05 and LM45. The LM45 To's have to be associate with storage units and this association occurs only if I choose VWT as the storage type..
When I choose VWO as the storage type then the items are not associated with a Source Storage Unit. This is because the storage type VWO does not have SU management active whereas VWT has SU management active.
So, what I am primarily concerned about is the way I could enter the storage type information dynamically.
Arup

Similar Messages

Today when i was downloading new songs a message popped up stating that my ipod can not be used because i have to update the software to 10.6.3. I cant find anywhere on the this website where i can update my ipod touch to that version

Today when trying to download new songs to my Ipod touch a message popped up stating that my Ipod can not be used because I need to update the software to 10.6.3 and to go www.itunes.com. I cant find where to update my Ipod touch to the version on the website. HELP!!!

I suspect you have a Mac with OSX 10.5.8. If so see:
ios 6 and macosx 10.5 on a pre intel...: Apple Support Communities
Otherwise what OS and version do yo have?
What version of iTunes do you have?

I have a MacBook Pro and I created a movie using imovie but once I put the DVD back into my computer it said it was blank! Why?

I have a MacBook Pro and I created a movie using imovie but once I put the DVD back into my computer it said it was blank! Why?
Please HELP!!!!

AFAIK, you can't author a DVD using iMovie - again, AFAIK, you need authoring software such as iDVD or Toast Titanium or something similar.
Clinton

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation". Anyone know how to fix this?

Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation".
Anyone know how to fix this?
Please help. I can't get it to work. I've tried uninstalling and it says the same thing. Is there anyway anyone can help me?

HELP!!!! PLEASE!!!!!

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I alocate th

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I allocate the extension .docx to Word? There used to be a way of doing it, I think under "Preferences" but I can't seem to find it.

Still in the same location:
File > Get Info > Open with (select) > Change All (button)

How do i add photos to the photo array when creating a book using iphoto 8.1.2? the book doesn't accept the albums and foldlers i drag and drop.

how do i add photos to the photo array when creating a book using iphoto 8.1.2? the book doesn't accept the albums and foldlers i drag and drop.

I'd suggest you ask this question in the iPhoto forums:
iPhoto
Posting here is unnecessarily limiting the people who'll see your question to those running iMacs.
Regards.

I have a used macbook pro and i cant update the apps bought on the first owners account and i need to update the apps

hi i hav a used macbook pro running mverics and i cant update the apps that were purchased by the preveous owner on a different itunes acount and i need to update the apps thanks

It appears as if the OS currently on that machine was not the original OS? If so, you are running into this problem because the seller did not do what he was supposed to do - he was supposed to erase the hard drive and reinstall the original OS. And, if he got either the OS or any apps at the app store, they are not transferable as they are tied to his Apple ID forever. That is why you will have to pay for them using your own Apple ID. And, if he obtained the current OS at the app store, you may also run into another problem: you may not be able to reinstall the OS if needed as that is tied to the original Apple ID as well.

Hi all, i need to create a one method in assistance class for updating the custom table.

Req as follows :
1. i need to create one method in a assistance calss for updating custom table .
2. now i have to pass the multiple entries to that table then inside the method based need to update the Ztable. based on this entries
3. My internal table is having 2 fields ( Customernumber (key field) , Shiftloc ).(Multiple entries ex : 500)
   based on customernumber need to update the new shiftloc in my custom table.
Can any one give some inputs please. i have doubt can we pass mupltiple entries (internal) as a importing parameter to the method?
Cheers,
Venu

Hi rama,
thank you for your promt reply.
i have one more query. Here i need to update the only Shipt to adress for particular customer number.
i have written the code as below. Please clarify this code will work for my requirement.
   method UPDATE_SHIPTO.
data : Lt_contract type ty_update_shipto_t.
data : ls_contract like line of Lt_contract .
REFRESH : Lt_contract.
lt_contract[] = LT_DATA[].
loop at lt_contract into ls_contract.
*    update Zcustom SET ship_to_adress = ls_contract-new_bp
                             WHERE cust_no = ls_contract-custnum
    CLEAR : ls_contract.
ENDLOOP.
COMMIT WORK.
endmethod.

How doI change my last name on my bill and profile? Using maiden name, need to update to married name

How doI change my last name on my bill and profile? Using maiden name, need to update to married name

Yea its a good thing to update because 95% of the Time a Rep. may ask for the Primary owner of the lines and if your not that person you can't hardly do squat with it. Case in point with my With our Lines my Mom was the Primary owner and i couldn't do Anything with out them wanting to talk to her first. Getting a Phone, Making Changes, Check statuses, Heck there was one time i remember i couldn't even pay the bill not exaggerating there it was basically out of my Hands my Mom got tired of this and she changed it.. Now that i'm considered as second Owner and i can do as only my mom could there are a still a Few rare occasions that a Rep will ask for her on but for the Most of it i have free Range with the Account.. b33

When we create a permitted payee do you need to setup the permitted payee

Hi,
If a headoffice is setup in 3 different company codes. Then when we create a permitted payee do we need to setup the permitted payee in all 3 company codes.
Pls suggest.
Regards,
Shree.J

Hi,
Incase if i maintained one vendor number say 100100 for company code 1000, 2000, 3000 and 4000, then do i need maintained permitted payee say 5000 for all the above company code.
regards,
sree.j

HT4484 i used to have an app store and lost it and i created a new one and i can not update the iphoto app because it was updated with the old account, is there a solution for this problem?

i used to have an app store and lost it and i created a new one and i can not update the iphoto app on my macbook pro because it was updated with the old account, is there a solution for this problem?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

Apps are permanently tied to the ID used to purchase them.
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and re-set th password for the old one.
Then, log into the app store with it and update the apps purchased with that ID.

Need to get the MIME type of Files

hi
I have a table which contains Partno and the images name i.e PRODUCT_AWG_20070416 and the data would be like that :-
partno img_name
PX1 px1.jpeg
PX2 px2.jpeg
PX3 px3.jpeg
Now one by one i am Inserting those files into my table (img_temp -BLOB Column) which are exists in directory & the map file. but i also need to insert the MIME type of the inserted file. can you please provide me the way to generate MIME type on the basis of file type like (JPG,GIF,TXT etc).
the procedure i am using is as follows :
hi
I have a TABLE which contains Partno AND THE IMAGES NAME i.e PRODUCT_AWG_20070416 AND THE DATA would be LIKE that :-
partno img_name
PX1 px1.jpeg
PX2 px2.jpeg
PX3 px3.jpeg
Now one BY one i am INSERTING those files INTO my TABLE (img_temp -BLOB COLUMN) which are EXISTS IN DIRECTORY & THE map FILE. but i also need TO INSERT THE MIME TYPE OF THE inserted FILE. can you please provide me THE way TO generate MIME TYPE ON THE basis OF FILE TYPE LIKE (JPG,GIF,TXT etc).
the reason of this requirement is, we need to use that table in APEX 2.2 fromwhere i can download the inserted file and to download the file we need to get correct MIME_TYPE of that file.
Please Suggest me the way.
Thanks.
The Procedure which i am using is as follows :
CREATE OR REPLACE PROCEDURE img_uploader IS
CURSOR Cur_img IS SELECT part_no,image_file FROM PRODUCT_AWG_20070416
WHERE Transaction_id =1 ;
l_bfile BFILE;
l_blob BLOB;
BEGIN
FOR Cur_img_val IN Cur_img LOOP
l_bfile := BFILENAME('SOLVS_PRODUCT_IMG', Cur_img_val.image_file);
INSERT INTO img_temp (part_no,MIME_type,file_name, img)
VALUES (Cur_img_val.Part_no,NULL, Cur_img_val.image_file,EMPTY_BLOB())
RETURN img INTO l_blob;
DBMS_LOB.fileopen(l_bfile, Dbms_Lob.File_Readonly);
DBMS_LOB.loadfromfile(l_blob, l_bfile, DBMS_LOB.getlength(l_bfile));
DBMS_LOB.fileclose(l_bfile);
END LOOP ;
COMMIT;
END;

Hello,
Perhaps this can help:
http://help.sap.com/saphelp_nw04/helpdata/en/ad/ebe5cc1d75aa43a2871717d76f475d/content.htm
If you want to know the table name, turn on tracing (ST05) when accessing the MIME types.
regards
Rick Bakker
Hanabi Technology

I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update, it says the latest version is unavailable to the U.S. I can't access photos

I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?

stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad?

Create T.O using outbound delivery. Need to update the storage type.

Similar Messages

Maybe you are looking for