Create the data structure

hi,
please let me know how to create the data structure.
thanks
suja

Goto SE11
Select "Data Type" radio button
Give name with starting "Z"...example: ZFIRST_DATA
Press "Create"
Select "Structure"
And Give your own description.
Then give your fields....
Save & Activate

Similar Messages

  • Can I automate the creation of a cluster in LabView using the data structure created in an autogenerated .CSV, C header, or XML file?

    Can I automate the creation of a cluster in LabView using the data structure created in an auto generated .CSV, C header, or XML file?  I'm trying to take the data structure defined in one or more of those files listed and have LabView automatically create a cluster with identical structure and data types.  (Ideally, I would like to do this with a C header file only.)  Basically, I'm trying to avoid having to create the cluster by hand, as the number of cluster elements could be very large. I've looked into EasyXML and contacted the rep for the add-on.  Unfortunately, this capability has not been created yet.  Has anyone done something like this before? Thanks in advance for the help.  
    Message Edited by PhilipJoeP on 04-29-2009 04:54 PM
    Solved!
    Go to Solution.

    smercurio_fc wrote:
    Is this something you're trying to do at runtime? Clusters are fixed data structures so you can't change them programmatically. Or, are you just trying to create some typedef cluster controls so that you can use them for coding? What would your clusters basically look like? Perhaps another way of holding the information like an array of variants?
    You can try LabVIEW scripting, though be aware that this is not supported by NI. 
     Wow!  Thanks for the quick response!  We would use this cluster as a fixed data structure.  No need to change the structure during runtime.  The cluster would be a cluster of clusters with multiple levels.  There would be not pattern as to how deep these levels would go, or how many elements would be in each.   Here is the application.  I would like to be able to autocode a Simulink model file into a DLL.  The model DLL would accept a Simulink bus object of a certain data structure (bus of buses), pick out which elements of the bus is needed for the model calculation, and then pass the bus object.  I then will take the DLL file and use the DLL VI block to pass a cluster into the DLL block (with identical structure as the bus in Simulink).  To save time, I would like to auto generate the C header file using Simulink to define the bus structure and then have LabView read that header file and create the cluster automatically.   Right now I can do everything but the auto creation of the cluster.  I can manually build the cluster to match the Simulink model bus structure and it runs fine.  But this is only for an example model with a small structure.  Need to make the cluster creation automated so it can handle large structures with minimal brute force. Thanks!  

  • Error while creating the Organization structure.

    Hi,
    I am trying to create an Organization structure in SRM 5 sytem, I have created a Root for the structure and when i try to click on the Attribute Inheritance or the Check tab below i am getting an error "Start program BBP_LOCATIONS_GET_ALL first (see note 563180 and long text)" but i have replicated one plant from the R/3 system using BBP_LOCATIONS_GET_SELECTED and the material groups and all the other relevant datas from R/3. I can see in the table BBP_LOCMAP the plant been associated with the relevant company code. I am now struck in creating the organization structure. I am not sure where i am going wrong while creating the Org model.Please give me your valuable inputs to overcome this error.
    Regards
    GGL

    Go to transaction SM30, table T77S0
    Add an X to the following entry:
    Group = EBP          
    Sem abbr. = LMIGR        
    Val. Abbr. = X       
    Description = Locations Successfully Migrated
    This tell the system that the locations have been replicated and the error indicating location get all needs be executed will go away.
    thanks,
    justin
    Edited by: Justin Farley on Feb 25, 2009 7:16 PM

  • Error in creating New Data Structures

    Hi Gurus,
    I tried creating new data structure in the R3 server using RSO2. I was planning to use the Purchasing Table (EKBE). But when I tried saving the structure this error occured/showed.
    Invalid Extract sturcture template EKBE of Datasource MM_EKBE
    Diagnosis:
    You have tried to generate an extract structure with template structure EKBE. This was not successful, because the template structure references quantity or currency fields, for example the field name MENGE from another table.
    Procedure:
    Generate a view or a DDIC structure based on the template structure, which does not contain the unstupported fields.
    - I have no idea what the problem is and what i should do based on the procedure. If anyone can help it would be much appreciated. Thank you in advance
    - KIT

    Hi Kristian,
    The table EKBE has quantity and currency field refernceing field from other table to define them.
    You need to include these refenced filed in the structure you add in the data source as the template.
    To do this create a custom dictionary object view.
    In the view include the refernce currency and quantity field from the reference table.
    Also create a join between EKBE and the refernece table using the data elements that are the same.
    For example, for quantity key figures in EKBE the unit of measure would be sourced by menge from MARA.
    So you need to have table MARA included in the view.
    The join would be on the material in EKBE and material in MARA.
    You will find reference quantity and currency tab in the table definition in the Reference currency/quantity tab in the table definition.
    You need to do this for all your quantity and currency references.
    Once that is done use the ZVIEW to create your data source.
    Hope it helps,
    Best regards,
    Sunmit.

  • Fields missing while creating the data source

    Hi All
    I am using a third party system to pull data in to BI...Actually there was one table where from the other end they had added 2 fields recently...when i checked in development i was able to create the data source for the table along with the new fields..but when i check it in production those newly added 2 fields are missing .. though i am able to see  the old fields in the data source the newly added fields are missing..so is there any problem with the refreshment of the table or should we reastart the connection?
    Can any one  please  let me know a solution for this...
    Regards
    Shilpa

    HI,
    Are you having connectivity like this
    BI Dev
    BI QA         ---> All Three connected to same 3 rd party system
    BI Prod
    If yes, If it is R3 replicate datasource will help.
    Incase of third party system you need to regenerate the datasource.
    if it is DB Connect try to go to the source system and connect to database table from BI side and at the top you will have
    generate datasource. use that option you will be able to solve.
    Else
    BI Dev - 3rd party dev
    BI prod - 3rd party prod
    Try to add 2 new fields in the 3rd party system and generate the datasource as told above.
    Thanks
    Arun
    Edited by: Arunkumar Ramasamy on Sep 14, 2009 9:12 AM

  • Problem in creating the data source in r3.

    hello gurus,
    i have created a view in r3 for transaction table but i am not being able to create the data source for the same.
    i have two fields in my table called amount n currency.
    when i remove those two fields then i am able to create the datasource but with those two field present i am not being able to create the data source.
    p.s- amount field is being reffered to another table in r3.
    please help me.

    Hi Anup,
    In that case u have to inlude table which contain amount field also in ur view. And need to give teh join condition.
    Hope this helps.
    -RajNi.

  • Problem in creating the data source in bw 3.5

    hello gurus,
    i have created a view in r3 for transaction table but i am not being able to create the data source for the same.
    i have two fields in my table called amount n currency.
    when i remove those two fields then i am able to create the datasource but with those two field present i am not being able to create the data source.
    p.s- amount field is being reffered to another table in r3.
    please help me.
    Edited by: anup chaudhari on Apr 17, 2008 2:42 PM

    Hi
    Please consider reference tables also while creating view, otherwise it won't accept when there are amount and currency fields.
    Please have a look at the below url
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=genericdatasourceusingview&cat=sdn_all
    thanks,
    Teja

  • Bank Analyzer - Error while creating the Position Structure

    Hi,
    We are implementing Bank Analyzer 6.0 and Implementing Financial Instrument and Financial Transaction.
    We facing an Error while creating the Position Structure,
    Error Message: Status of structure S40CURRACC is "New"
    Anyone has an idea how to fix this?
    Thank you,
    John Crawford

    Hi,
    1.Run Transaction - /BA1/F0_SGS_START
    2.Entered the name of the structure and try to "activate". 
    3.It will get Active without any inconsistency.
    Regards
    Phani

  • While creating the Data source for Sql server am getting this error?

    Hi i new to Power BI sites and office 365,
    For my first step 
    1. i have successful creaeted Gateway in Office 365
    2.Now i have creating  the Data source for that gateway using Sql server R2
    3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials  phase i have noticed one pop up window and it will shows me like
    Data source Settings and  below in that window it will show's u the things like 
    Datasource Name.
    Loading......
    Credentials type:
    Privacy Level:
    Failed to verify parameter
    I will get this results finally  ,so hw should i achive this probelm ,Please let me know if any one knows
    So kindly give me the proper answer for this.
    Regards

    Any suggestions for Chinnarianu?
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • How to create the Data Type for the receiver end?

    Hello Expertise
    I wanted to Create a Data type for  Receiver end in PI.
    Sender end is ECC.
    Receiver end is SRM
    Here's the Data type for Sender end  as
    Can anyone help to create the Data type for Receiver end i.e SRM.
    Thanks in advance.
    Regards
    karan

    Hi Karan,
    Please don't call Sir, we are just trying to help each other.
    Please go through below scenario's and check your configuration.
    ABAP Client Proxy to ABAP Server Proxy Scenario - Process Integration - SCN Wiki
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=true
    http://wiki.scn.sap.com/wiki/display/XI/Step-by-step+FTP+to+ABAP+Proxy
    regards,
    Harish

  • Error while creating the data source

    hi
    iam creating generic data source using function module.
    i inserted the function module and structure name,
    when i press the save button, it is throwingerror message as Units field WAERS for field ANSWT of DataSource ZEQUIP_DS is hidden.
    please guide me how can i overcome this
    treat this is as urjent requirement
    regards
    kumar

    The error message is explicit the WAERS field is hidden...you must edit the datasource structure in RSO2 and uncheck the "hidden" checkbox for that field....
    It will solve your problem...
    Regards

  • I m trying to write to a Mainframe file from informatica mapping. I have created the data map for tarrget file and have imported it in informatica designer.After completing the mapping when i try to run it gives me below error. Please help me out in resol

    This is not a PC/PWX problem, but a mainframe security problem. TIDSS01.POS.IBD.DR0100.DAT is not a GDG file name.It might be the base for a GDG. A GDG file name would look something like eitherTIDSS01.POS.IBD.DR0100.DAT(+1)orTIDSS01.POS.IBD.DR0100.DAT.G001V00 So I suspect that you have the wrong file name.Please talk with your mainframe team.

    HI Dan, I am very new to using power exchnage please help me through this issue, Below is the details : My data map name :postest.test1_POS
    Copy book name which is used to create the power exchange Datamap : TIDSS01.ACTRLP.TEST(POSCPY)
    Main frame GDG name : TIDSS01.POS.IBD.DR0100.DAT Below are the Session properties i have set in informatica workflow:Schema Name Override : postest
    Map Name Override : test1_POS
    PWX Partition Strategy : Overrides driven
    Space : CYLINDER
    File Name Override :TIDSS01.POS.IBD.DR0100.DAT(+1)
    I am getting below error: PWXPC_12190
    Message: [ERROR] Transformation [test1_POS]: A permanent error has been encountered in PowerExchange: [
    [Informatica][SCLI PWX Driver] PWX-00267 DBAPI Error. DB_INSERT failed for file postest.test1_POS.
    [Informatica][SCLI PWX Driver] PWX-01279 DBNTC INSERT failed for file postest.test1_POS. Rcs 1274/2019/268.
    [Informatica][SCLI PWX Driver] PWX-01274 DBNTC INSERT Failed for file postest.test1_POS, rcs 260/2019/268.
    [Informatica][SCLI PWX Driver] PWX-02019 SQL insert failure. SQLCODE = 268.
    [Informatica][SCLI PWX Driver] PWX-00268 DBAPI Error. DB_OPEN failed for file TIDSS01.POS.IBD.DR0100.DAT.
    [Informatica][SCLI PWX Driver] PWX-00220 DYNALLOC failed for file TIDSS01.POS.IBD.DR0100.DAT RCs = 9700/0.
    [Informatica][SCLI PWX Driver] PWX-00221 DATA SET: TIDSS01.POS.IBD.DR0100.DAT WITH RETURN CODE 08 REASON CODE 00   
    [Informatica][SCLI PWX Driver] PWX-00221 RACF FUNCTION: RACDEF FOR   
    [Informatica][SCLI PWX Driver] PWX-00221 IGD308I DATA SET ALLOCATION REQUEST FAILED -   
    [Informatica][SCLI PWX Driver] PWX-00221 IKJ56893I DATA SET TIDSS01.POS.IBD.DR0100.DAT NOT ALLOCATED+   
    [Informatica][SCLI PWX Driver] PWX-07404 Permanent error set by Open call on file "TIDSS01.POS.IBD.DR0100.DAT" because dynamic allocation failed. rc=4
    [Informatica][SCLI PWX Driver] PWX-07515 Insert call for table postest.test1_POS met a permanent error. Return codes 267 2019 268.
    ]

  • Creating the directory structure in Planning

    <p>Hi</p><p>can anyone tell me how to the directory structure inPlanning.</p><p>thanks and regards,</p><p>Balu</p>

    Hi Sham,
    Thanks for your help,
    I ended up using:
    dialog.success = function(form, response) {
            CQ.Ext.getCmp(window.CQ_SiteAdmin_id).reloadCurrentTreeNode();
            var loc = response.result.Location;
            loc = loc.replace("/content/", "/cf#/content/") + ".html";
            CQ.shared.Util.open(loc);
    Now, this launches a new page for the editor, when the page is successfully created...
    Ideally, I wanted to use some other function instead of CQ.Ext.getCmp(window.CQ_SiteAdmin_id).reloadCurrentTreeNode(); -> CQ.Ext.getCmp(window.CQ_SiteAdmin_id).reloadCurrentTreeNodeAndNavigateToPath(path).  Is there a function that does this in CQ ?
    Peter

  • How to create the Hierarchy Structure in BeX

    Hi,
    We have a cost center IOBJ MD, and our source system does not have the feasibility to create hierarchy to load it. But the business gave a hiearchy structure in flat file, and want to get the cost center hierarchy in bex.
    How do we do that ? Please suggest.
    Thanks
    RK

    Hi,
    A hierarchy can be created in the system by two ways:
    By hand:
         I would recomend to create by hand if the hierarchy has a few nodes or if the hierarchy will stay without changes for long.
         RSA1 --> Look for your infoobject and "create hierarchy". Then, you can create the folders and nodes that you need and dont forget activate it
    This option is the quickest and easier, if you could go for it.
    Loaded by flat file.
         If the hierarchy has many many nodes or if it will change its values quite often, it will be a good idea to develop stractors, infopackage and so on for loading the information from file file.
    There are plenty of information of the Internet about how to do it.
    From my own experience, it would be easier to build the extractor in the old version (rsa1old).
    I hope that it helps!

  • Tool needed for creating the package structure

    I need to create a package structure of an existing application. I don�t know much of UML and so I was just wondering if there's any tool available to do so.I researched and came to one such tool(not free to use) i.e
    http://javacentral.compuware.com/pasta/
    Please let me know if you guys know of something similar to this.
    Thanks

    No. There should be an option to 'import java sources' somewhere in the 'file' menu (I think). Unpack the WAR. You will need to locate the JAVA source files, and then import from ArgoUML. The classes will all come in. You simply have to drag which ones you want onto the applicable blank diagram(s) you create.
    - Saish

Maybe you are looking for

  • IMP-00032

    Hi, during the import the message IMP-00032: SQL statement exceeded buffer length IMP-00008: unrecognized statement in the export file: appears. I know, the buffer was too small for the SQL statement being read. But which buffer must I change/enhance

  • The "DEFINING DATABASE ldb " addition in "REPORT" statment

    Hi all I wonder what the "DEFINING DATABASE ldb " addition in "REPORT" statment is involve to? cause I didn't understand the SAP help of this addition! Thanks.

  • Having trouble downloading OS X Mavericks

    Having trouble downloading OS X Mavericks

  • Export command missing in imovie 11 upgrade?

    In the latest upgrade for iMovie 11' there is no "export to QuickTime" or other way to set your preferred export settings? can anyone explain how to do this now?

  • Songs are not authorized

    when try to synch, i get a message that some songs are not authorized. yet when i authorize my computer it says it is alredy one of my authorized computers