Create the dbf file with java, but cannot display the data with VF
Dear all,
i create a dbf file with some java packages, this file can be opened and display all of the data with excel, but just can show the data structure and no any data when i open it with VF, how to solve it?
Hi, I have got same problem as you. My application generates a DBF file from a resultset. In MS Excel it looks pretty good - all data, but when I try to open same DBF file with Fox or MS Access, I always see ONLY header(column names), but NO data! I don't know why?! The application generates this file using JDBF classes (version 1.0). I guess, maybe it is caused by the size of this file. The DBF file had 18 columns and over 32000 rows.
Did you find the cause? I'll be grateful for help.
Similar Messages
-
Greetings All,
I am having issues with a SharePoint Designer workflow. This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow. I'm developing this as a SharePoint 2010 workflow because I need to do
impersonation.
The environment and workflow have been running, in the past week, without issue. I went to add a couple steps and now I cannot publish the workflow. While in SharePoint Designer, I receive the error:
"Errors were found when compiling the workflow. The workflow files were saved but cannot be run." When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow."
That is all the error information I have available; nothing is in the log files.
I have investigated this error and tried the following:
Cleared the SharePoint Designer cache.
The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000. Restarted the servers (which may not have been necessary) and tried again receiving the same error. I then increased it to 30000 with the same error result.
Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
I reboot the servers and try again and now I can publish the small test workflow but not the original. However, neither will run. When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
An unexpected error occurs. I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
Also, now no workflows can be published in this web app. Not just the one I was working on but none of them!
Does anyone have a clue what has happened to the SharePoint 2010 workflow service? Or some suggestions for me to try?
Thank you in advance for your help!
Bob Mixontry these links:
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
Hi Sagar,
I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
Your first link is specific to SharePoint 2013 workflows.
Your second link refers to the UserDefinedWorkflowMaximumComplexity. If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
Your third link also refers to large workflows with many approval activities. My workflow doesn't contain any approval activities.
And you fourth link refers to 2013 workflows not 2010.
My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
Thank you... -
Export to Excel Fails with "Internet Explorer cannot display the webpage"
We have a couple of report servers all hosted internally on VMs. They are all SSRS 2008 R2.
For all of these, when viewing the reports remotely in IE, they run fine. However when we try to export them to excel, a new tab opens in IE, but the tab just displays with "Internet Explorer cannot display the webpage"
There are no other errors and it never progresses to save or open.
THE SSRS log files dont contain any errors either so i dont think its a resource issue, but they do say steam=''
library!ReportServer_0-1!11cc!03/11/2014-08:49:24:: i INFO: RenderForNewSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11cc!03/11/2014-08:49:27:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!7a0!03/11/2014-08:49:44:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!7a0!03/11/2014-08:49:45:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!18d0!03/11/2014-08:51:06:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!18d0!03/11/2014-08:51:07:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!1610!03/11/2014-08:51:38:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!1610!03/11/2014-08:51:39:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch()
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch() ends
library!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
Does anyone have any suggestions?Hello,
Since you have motioned that it is work well in IE7 on the VM. We can try to enable the compatibility view of the IE to troubleshooting the issue.
Reference: http://support.microsoft.com/kb/2536204
Based on your description, the issue is just occur when view the report remotely. The issue may relate to Internet Explorer, please refer to the following methods:
Run the Network Diagnostics tool in Internet Explorer.
Reset the modem or the router.
Use the Delete Browsing History feature.
Use the Internet Explorer (No Add-ons) mode.
More detail information, please refer to the similar issue below:
http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/internet-explorer-cannot-display-the-webpage/c8a0b157-820a-4a14-80f3-806ab51717fa
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
HOw to create a Batch file for java application and whats the use of this ?
HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advanceFirst of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye. -
I am trying to upload photos from my Windows 7 desktop, and was told to go to the iCloud control panel and drag the photos into the
upload to photo stream icon. I have downloaded the contol panel several times and cannot find the icon to get this done. HELPIf you're trying to add photos to photo stream on your PC, you drag them to your photo stream uploads folder (normally My Pictures\Photo Stream\Uploads).
-
I received a pdf file. the document has photos which I cannot extract each one and save in my personal file. Can you help?
Yes this is the document that I received. Can you help me to get and save the photos in my personal file???
-
Problem of creating FoxPro dbf file in Java
Hi all,
I tried to create a empty FoxPro dbf file with the following codes in Java:
sqlString = "create table mytable.dbf ( Name C(10) )"
queryStatement.execute( sqlString );
And it did create a "mytable.dbf" file. However, when I opened it with Excel, it said that it is not a recognizable format. If I continued to open it, I could only see some junks inside.
I am using Windows 2000 Pro and j2sdk 1.4.2. I also have Microsoft Visual FoxPro Driver installed. This works perfectly with SQL commands like SELECT and INSERT, but just doesn't work for CREATE. Does any body have a clue of what I should do? Thanks a lot!
AlexYou may want to get rid of the .dbf part in your create statement. Foxpro doesn't need that. It should be:
create table mytable(myfield c(10)), not create table mytable.dbf(myfield c(10)).
This may help. If people are using a recent version of Excel it should be able to open up foxpro tables...I do it all the time. What version of Foxpro are you running, and what version of the dbc driver for Foxpro are you using?
Eric -
Can open .pdf files in Chrome but cannot open the same file after saving it.
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: AcroRd32.exe
Application Version: 11.0.3.37
Application Timestamp: 518e18e3
Hang Signature: 99d4
Hang Type: 0
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: 99d4b1f941b223144a152a1173c0a0ff
Additional Hang Signature 2: 01f5
Additional Hang Signature 3: 01f554accbda5b57fa70e2256b021236
Additional Hang Signature 4: 99d4
Additional Hang Signature 5: 99d4b1f941b223144a152a1173c0a0ff
Additional Hang Signature 6: 01f5
Additional Hang Signature 7: 01f554accbda5b57fa70e2256b021236
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtThanks Pat. Tried each, restarted computer each time; tried the "Accept" routine several days ago - it worked briefly and then stopped. Uninstalled Reader and Flash as well. Strange thing with Flash, one of my online broker programs provides streaming of CNBC. When I clicked on the CNBC option to initiate CNBC, I got a message saying that I needed to load Flash. I did, and it loaded again with no mention of Flash having already been installed.
Using Internet Explorer works, as well as, clicking on the .pdf file within Windows Explorer (WE). Expanding the window in WE makes it large enough to read. I would still like to find a way to open the files as they are designed to open.
I have done all of the Adobe updates as they have been presented. Microsoft updates load automatically, and restart my computer in the process. I do not look to see what the updates have been. I figure if there was not a need, Microsoft would not make the updates.
[private data removed] -
I have an iMac 10.8.4 and an iPhone 5s. I recently downloaded 110 photos and 10 very short videos using Image Capture v.6.2. I plugged the phone into the iMac, all of the photos appeared in Image Capture, I selected all and sent them along to a folder on an external hd.
However, this week, attempting the same procedure, I get nothing. Image Capture sees my phone but does not display any photos, just a big blank window. Same response from iPhoto, Aperture, and Lightroom; they all recognize the phone but none of the photos appear. Insight would be appreciated! Thanks.Hello WellShoot,
Thank you for the details of the issue you are experiencing with importing photos from your Camera Roll using Image Capture. You have taken some really good steps already to troubleshoot this issue. The article below has a few additional troubleshooting steps you can take:
iOS: Unable to import photos to computer
http://support.apple.com/kb/ts3195
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I am not allowed to edit my css source code. I can open a css file
and see all the code but when I try to change any of the text, it
will not do it. I thought I could text edit to update css files. How do I do that?If your intention is to upload the changed file(s) to the server then you need to use an external editor.<br />
Otherwise you can look at an extension like Web Developer.
*Web Developer: https://addons.mozilla.org/firefox/addon/web-developer/ -
Why ohhhhh why can I NOT get into the store? I have uninstalled and re-installed apps but nothing!! I can bring up my current music but cannot get into the store to purchase more!! Someone please HELP me. I'm soooooo ready to give up!!
Try and "Forget This Network"
Settings>Wi-Fi>tap little arrow on right of network.
http://i1224.photobucket.com/albums/ee374/Diavonex/ea2bf71cacb51e31d8a771a9f29d7 486.jpg -
I received a $25 dollar iTunes gift card from a friend of mine as a gift. She had used some of the card before she gave me which
did not bother me. However, I cannot transfer the funds from the card to my iTunes account. Is it possible that I cannot use this card,
or is there a way I still can use the funds on the card.
Thank You,
GeoWhen an iTunes card is redeemed, the entire value of the card is placed on the iTunes account. It is a one time use thing. So, there is not a remaining balance on the card.
-
How2 create xml & ent files from JAVA? (xml that gets data from ent file)
Is there any API that can make it easy?
* For parsing XML I use JDOM parser
I want to create file like this:
XML file: some.xml
<?xml version="1.0"?>
<!DOCTYPE xfat [
<!ENTITY d_request SYSTEM "some.ent">
]>
<!--
/home/bNUMBER/Programs/XFAT/runxfat some.xml
-->
<xfat title = 'Fat Title (some) '>
<database filename = 'Some_Data/some.xml'/>
<snc filename = "../snc/snc.xml"/>
<configuration sp = '../sp/some_only.xml' name='Some_A-H'>
&d_request;
</configuration>
</xfat>and ent file:
<ddef title = 'some d def title (some)'>
<dcalc snc = '7_A9'
meas = 'm73'
red = 'GOOD' binval='MCMS' lug='YES'/>
</ddef>has anyone idea what to search?
-
How to create the exe file for java project.
How to create the exe file for java project.
am done the project in java swing , i like to create the project in exe format, so any one help for me,
send the procedure for that.
thanking u.How to create the exe file for java project.Have you ever heard of google? I pasted your exact "question" into a google search:
http://www.google.com/search?q=How+to+create+the+exe+file+for+java+project.
and got several useful links.
Better search terms might yield even better results.
Sheesh. -
I have the tones tab in iTunes, but cannot move the .m4r files to it. How can I resolve this issue?
iIn iTunes - click on the Tones tab. Now go to the menu - select "File" - "add file to library" - browse to your file - select it and thats it.
Maybe you are looking for
-
What adapter needed to connect to S-video or composite video on TV
My MacBook Pro has a mini-display port and I can't seem to find an adapter that will allow output to S-video and composite video. I have the adapter that worked with the Powerbook G4 12". Thanks
-
How do I install Rockbox on the SanDisk Sansa Clip Zip?
Hello: I am new to the SanDisk Forums! I have the SanDisk Sansa Clip Zip player and the version is V01.01.18A. How do I install Rockbox on it? Thank you,
-
How do I keep the source document open when linking to a target document using the destination option in Adobe X? Have several links to create in the source document and want to keep the source document and target document open at the same time.
-
Hi , i have bpm scenario. MI_Source -> MI_Receive_BPM -> MI_Send(Sync)-> MI_TRANS1_BPM -> MI_TRANS2_BPM -> MI_TARGET 1)Recieve step is triggering the process 2)Send Step[ is sending the data to CRM and getting response back. After that Transformation
-
Hi,can anyone please tell me how to round up a double type value to 6 decimal places. Thank You!