Create transaction code for WDA as ITS

Hi experts,
I want to display a custom webdynpro application on SRM 5.0 just like existing service like BBPSC01, BBSC02 etc...
Could you please guide me how I can acheive this.
Thank you,
Manish

Hi Manish,
From reading the following threads in the SRM forum.
The services BBPSC01, BBSC02 etc... on SRM 5.0 use ITS, not the Webdynpro so I dont believe you can use Webdynpro here. Perhaps thread would be better opened under the application:
SAP Community Network Forums » SAP Solutions » SRM - General
See SDN threads:
[Can SRM7.0 be accessed by ITS without portal? |;
and
[SRM Internet services do not exist in SE80 |;
Regards,
Oisin

Similar Messages

Create transaction code for WDA

Hi experts,
I am on SRM 5 and I need to create a transaction code for my custom webdynpro application so that this can be displayed on the SRM EBP.
As there is no portal, I do not have the option to create an iview.
Could someone please let me know if there is a way to do it.
Thank you,
Manish

Manish,
who ask you to create IVIEW for creating tcode ? First create TCODE for your component using my previous link( in this link , no need of creating iview). after that you can directly use that tcode on your srm system.
After creating TCODE you can dispaly Tcode in normal browser , for this check this.
http://www.****************/Tutorials/WebDynproABAP/TransactionCode/Index.htm
from the above link you will get url, you can use that url directly in normal browser.
Regards
Srinivas

How to create Transaction code for Table Maintanance generator.?

Hi,
I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
Thanks in advance.
Best Regards,
Paddu,

Hi,
     Check the below steps......
1. Go to Tcode u2018se93u2019.
2. Select ' Transaction with parameters'.
3. Then Transaction 'SM30' with click on skip initial screen
      VIEWNAME : XXX9tABLE NAME)
      UPDATE   : X
4. Maintain the Table maintenance generator
Authorization group : &NC&
Authorization object :
Function group : name(xxx)
Maintenance Screens :
Maintenance type : One step
Maint Screen No : Overview screen (2)
If still u have problem I will send u steps with Screen shot ...send me Yr id.
Regards,
Biswanath

How to Create Transaction code for a Report

Hi Gurus,
I created some reports and I wants those reports
should be placed in the SAP Menu(initial screen) not
in the User menu in the form of Transaction codes.
I would really appreciate if any one can please send the process to create transaction codes for the User reports/Report groups in R/3 and how to add those created Transaction codes to the SAP MENU.
Thanks in Advance
Danial

Try to insert it into the main menu if you must change S000 (there is a function module for everything)? Perhaps SAP protects their menu trees from foreign subnodes in SE43?
Also note that for report transactions you do not need to give the user transaction code start_report. If you do, then they could enter it directly and potentially start many other reports too. The system will call start_report for submitting the report internally without authorizations for it required (unless start_report is maintained in SE97).
Regarding DE, this also confuses me sometimes and I noticed that it generally indicates that I am doing something which has an implication for a SAP standard object. Try either hitting the enter button to see what the next screen is, or, choose original language in the previous screen, or, logon in sy-langu = DE and (remember the path if you dont speak German) change it, or, follow JCs advice to create your own menu.

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

Create transaction code for CJE0 report

Dear friend:
Who's know how to create transaction code for CJE0 report.

Hi,
Alternatively, you can try adding anew entry to your menu area in development (SE43N), creating a subnode, selecting the report as your option and provide the information. Do not forget to give your own transaction name. I'm quite sure, that in this case (if you will transport this together with the report), it should work.
Regards,
Eli
P.S. I know that program names changes when it's about a writer/painter report. Is it really the same thing with CJE0 reports?

Creating transaction code for CJE0 reports

Hi,
Can anyone let me know a step by step precess for creating Transaction Code for CJE0 reports?
Thanks in Advance.

Hi,
There's just one proper solution:
Via trx SE43N. Steps:
1. I suggest you choose area menu PS01
2. Choose extend to create a new Z-folder (or select 'change' to add to an existing (standard SAP) folder)
3. Create extension , ehancement ID: f.e.: ZPS01
4. Select the new folder in the tree
5. Click 5th button: 'add entry as a subnode'
6. In pop-up 'Add new entries' click button 'Report'
7. Select radio button at 'Drilldown'
8. A pop up appears to select the application class
9. I guess you'll no what to do from here... it speaks for itself.
enjoy, Kind regards,
Gerjan

How to create Transaction code for ABAP and execution by other user

Hi All,
Could someone please let me know how to create transaction code in detail for ABAP program. Step by step procedure expected. I would like to know how other user can execute the report using same transaction code which I have created.
More about authorization.
Thanks in advance.

Hello,
You can create transaction code from se80 as well.In object navigator,right click on your program name and create->transaction code.You can create transaction and select if it is only a report,a report with selection-screen depending on your requirement.You can run your report directly by entering the transaction code in the command field.
You can authorise the users who can use your transaction:
Authorisation objects are used to restrict certain transactions to users.Critical data must be protected from unauthorised users.For example,the head has access to certain data.But it cannot be accessed by his subordinate.For this we need to define roles.
Create an authorization object with transaction SU21.
An object usually consists of the ACTVT (activity) field and one other field,which specifies the data type to be protected.By ACTVT, we can decide if the data is accessible for change,display only etc.
Add authorization fields to the authorization object created.
Assign the authorization object to the transaction using SE93.
Attach the authorization object to the role using transaction PFCG.
If you want to assign roles,use transaction PFCG.Create a new role.In the AUTHORIZATIONS tab,you can get a self generated profile name and a profile text by clicking on the icon next to it.Then go to the "Change Authorization data" and choose an authorization template.Then you can choose to display/change/create an activity and after the selection,click on the red and white circle.The profile will now be created.
In the user tab,you can give the user details who can use this role.
Also check this link:
http://www.*********************/r3_security/r3_security_tips.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/52/6716a6439b11d1896f0000e8322d00/content.htm
Very helpful guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
Regards,
Beejal
**Reward if answer is helpful

Create transaction code for abap report

Hello,
don't know if this is the correct subforum (sorry in advance).
I have created a ABAP Report in SE38 having a SELECTION-SCREEN.
Now I would like to have a Transaction code to refer to the report. So that I can call the Transaction and then get the selection screen to use the abap report.
How can I do this the simplest way? I can't find anything in google, can you give me some hints?

hi
goto se93
give transaction code and click create
select the second radio button(transaction code for reports)
give short description and press enter
after that give your program name
and select the gui check boxes as required for html ,java,
and save it
you can use the transaction code
REGARDS
PRASANTH

Create Transaction code for Area Menu with specific namesapce(/arba/ond_proc)

Hi Friends,
As I have created one Transaction Code For Area Menu with the namespace like (/arba/ond_proc).
It is working fine when I run this with /n/atba/ond_proc.
But When I ran this independently it's not working like:( /arba/ond_proc not working independently.)
Please suggest me some solution.
Thanks And regards
Rahul Singh

Hello
when you excecute the query in right han side corner you can get the program name
go to se80 select program & type this name and then you can create a tcode for that prog in SE80
reward points if helpful.
the prog name will be something like : AQZZ/SAPQUERY/* " ur query name
you can search for the name also in this manner

Creating Transaction code for selection screen of one ztable

Hi ,
    i have one Ztable in order see the data in it , he wants one new transaction . by executing tht transaction he wants to view the data inside the table.
i have created one transaction code by taking the transaction type as report transaction and program name i gave the selection screen program of tht table.
when i executed tht t code selection screen of table contents should come and on executing it i have to get data.
but im not getting data on executing tht selection screen .
why? for this scenario which tcode type i have to select.

Hi Pavan,
Check this,
Step 1
Create parameter transaction (i.e. via SE93)
Select the fourth options
Step 2
Enter transaction details. Within the Proposed values section there are a number of value which
can be setup, simply use drop down menu to view the list. The 2 values assigned in the following
example are as follows:
               VIEWNAME:        Set table name to maintained
               UPDATE:               Open table for update
Mohinder

Transaction code for report

Hi All,
I am new to SAP area. I have created ABAP program (Report and variant) which generate list of materials. User would like to run whenever they want and have little knowledge of SAP. So I would like to provide Transaction code for this report to user. Can anyone let me know how to create transaction code for report. Also suggest, if any other option available to provide the same to user.

Hi Yogesh,
Just as an option, you necessarily dont need to create a transaction so that the user can run the report. You can include the report in the menu for the user within his role to which he is assigned.
Hence on SAP easy access screen when he logs in, the user would be able to see the report all he needs to do is double click.
Just an option for you.
Regards,
Aditya
p.s. Transaction for role maintenance is PFCG .... refer to your basis consultant for more information

Transaction code for Table Maitainence for table

Hi all,
i have created Table Maintainece for Table and also i need to create transaction code
for table maintainence.
there when i create transaction code with TRANSACTION with PARAMETERS and SKIP FIRST SCREEN.
I can see all the records in the table into table Maintainence.
Is ther is any possibility like i can restrict records on the key fields (like selection screen).
Will anybody let me know how to goahead with this requirement.
Regards,
Madhavi

You can build a small report that call the maintenance view. In the report, convert the SELECT-OPTIONS input to the [DBA_SELLIST|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=dba_sellist&adv=false&sortby=cm_rnd_rankvalue] parameter of function module [VIEW_MAINTENANCE_CALL|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=view_maintenance_call&adv=false&sortby=cm_rnd_rankvalue].
If you have "pertinent" key to filter the data, you may define these as sub-key in a mainetance view, those fields will be asked for when entering the maintanance dialog. Or you can build a [view cluster|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=se55&adv=false&sortby=cm_rnd_rankvalue] using these sub-set keys.
Regards

Transaction code for custom table

Hi there,
I created one custom table. I created Tbale Maintenance Generator for this. I have to create transaction code for this table so that user can directly open this custom table in SM30. Can anybody suggest on this. is there any other way to do this so that user can directly open this custom table in SM30 mode?
Regards,
Zakir.

Hi
Check this link for creating a transaction code for a TM
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Please go throught below link ..... it was given with screen shots of the T.code Creating for the table after the maintaince view had been created ......
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Regards
Anji

Create transaction code for WDA as ITS

Similar Messages

Maybe you are looking for