Created a great form but cannot print front to back

I checked the permissions but cannot figure out why the form will not print from to back. I would have attached the form, but don't see how on this screen.

Try This...
Close All Open Apps... Sign Out of the Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Similar Messages

I am using a samsung netbook, can do print test but cannot print a file

i am setting up a new hp deskjet 3050 with my samsung netbook using windows 7 starter, i can do print test but cannot print anything else. how do we fix it? thank you

Hi,
If you use your netbook to print through the Wireless, be aware that Windows 7 Started eddition only support printing through a direct USB connection, network communication with the printer is not supported by the OS:
IMPORTANT NOTES
For Windows XP Starter Edition, Windows Vista Starter Edition and Windows 7 Starter Edition
• Is supported for USB only
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109394-2&cc=us&dlc=en&lc=en...
If it is connected through the network, plug a USB between the laptop and the printer, then try printing and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even previe

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even preview, without borders.

JimHess~ Many thanks. In my short history with LR, it's amazing how many people I've seen ask this question. I'm nearly embarrassed at how simple the fix was, but grateful that you didn't dismiss such a basic question. You made my week. And my friend's photo album...

TS3999 How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

Select the day. then look on the bottom left where you will see the word, TODAY, select it then select print frame.

I am trying to connect to an HP 4550N printer via ethernet from an iMac with OSX 10.6 but cannot print.

I am trying to connect to an HP 4550N printer via ethernet from an iMac with OSX 10.6 but cannot print.

never assume or assume their advice works out of the box
install the drivers that they sate is the latests on their site!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=dk &prodNameId=21861&prodTypeId=18972&prodSeriesId=27901&swLang=8&taskId=135&swEnvO ID=4082

Print front to back

I have a HP officejet Pro and need to print front to back and cannot unless I print in the booklet form

Are you sure you're talking about printing a PDF for an iPad or iPhone with Adobe Reader. You've just posted in the Adobe Reader for iOS forum, and the reference to "booklet form" suggests you're working on a desktop/laptop using other software.

How do I bring form fields to the front or back?

I have a document with many form fields/push-buttons in order to create pup-up effects in an info graphic.
So I use fields to create a mouse-over hot spot, and others that pop up. Now, of course, the hot spot must be in front (or on top), otherwise it gets distracted in it's mouse-over function by the popped-up object (image) that lays over it. (The result would look like a flashing effect, as you roll over the hot spot.)
Now how do I arrange the fields?? Ich can arrange images and texts to come to the front or hide behind other objects. But in the form field editing mode there is no such option. Also it doesn't work to just cut and paste them, they re-appear in their former position, often behind the other fields.
Please, help! Thanks, Peder

Thanks, I will give it a try. To "recieve the focus" means being activated / hovered?
Am 22.04.2015 um 18:49 schrieb George_Johnson:
How do I bring form fields to the front or back?
created by George_Johnson in PDF Forms - View the full discussion
The tab order effectively sets the z-order, but if a field is not read-only it will be set to the front if it receives the focus.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7465780#7465780 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7465780#7465780
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in PDF Forms by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
···)····• Blixen
werbliche Kommunikation
Peder Iblher . Wichertstraße 16/17 . 10439 Berlin
Telefon 030 - 250 400 401 . Fax -409 . Mobil 0160 - 93 81 58 60
[email protected] . www.blixen.eu . www.facebook.com/blixen.eu

How do I print front and back with two pages per sheet? (OSX Lion)

I can't find a simple solution to my situation...
I'm using Max OSX Lion 10.7.3 and Adobe Reader X 10.1.2.
I want print two PDF pages onto one printed sheet, and I want to print front and back. When I go to the print settings and select two pages per printed sheet, the sample window shows me what I'm looking for. But when I tell it to print odd only or even only, it changes the print selection. Here's what happens...
Let's say I have a PDF document that is 20 pages long. When I tell it to print two PDF pages per sheet, it shows me that the first pages printed will be PDF pages 1 and 2. When I tell it that I want it to print odd pages only, it tells me that the first printed page will contain PDF pages 1 and 3.
In other words, Adobe Reader wants to print the odd PDF pages instead of the odd pages of the printed document (PDF pages 1 and 2, then 5 and 6, then 9 and 10, so on).
So that I'm being clear...
This [ ] is a printed page. The numbers inside the brackets represent the page numbers in the PDF document...
What I want to print is this...
FRONT   || BACK
[1,2]    || [3,4]
[5,6]    || [7,8]
[9,10]   || [11,12]
[13,14] || [15,16]
[17,18] || [19,20]
What would end up printing is this...
FRONT   || BACK
[1,3]    || [2,4]
[5,7]    || [6,8]
[9,11]   || [10,12]
[13,15] || [14,16]
[17,19] || [18,20]
Aside from telling it exactly which PDF page numbers to print (this would be a taxing job because I'm working with a 273 page document), is there an easy and simple way to print how I'd like?

I would suggest to use Adobe Ilustrator. Also I get an error message when I try tp access the sample document.
You can download Illustrator using Adobe Creative download - http://www.adobe.com/products/illustrator.html
~Deepak

HP8600 Jams printing front and back when 4 or more pages

System- Windows 8.1 PrinterHP Officejet Pro 8600 N911a. Model N911a Product number CN578A. Firmware version CLP1CN1322CR. Duplexer: Installed. ADF: Installed.
When printing front and back multiple pages of 4 or more pages the printer jams in the flip chamber. Both settings Printing [Front to Back] or [Back to Front] will jam.
I believe this occurred after going to 8.1 from 8.0, however, I am not sure.
Lameduck_9

Hello @Lameduck_9 , and welcome to the HP Forums!
I can see from your post you are experiencing jam issues. I would like to help!
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I have created an editable form which cannot be saved as a completed copy by adobe reader users.

I have a created an editable form in indesign and acrobat, however when other users open up the form and fill it in they cannot save the completed copy. It comes up with that the user needs to click done signing, however there is no done signing button in adobe reader.

Unless they're using Reader XI then you have to first apply a special right in Acrobat that allows them to save the filled-in form in Reader.
The exact location of this command depends on your version of Acrobat.

HP Print Doctor shows printer but cannot print.

After uninstalling some software that was causing my Windows 8.1 PC to freeze, I am no longer able to send a document to my HP 6230 printer.
- I have uninstalled and reinstalled the printer software several times.
- The printer will successfully print an "internal" test page using HP diagnostic software.
- Trying to print from any Windows program will bring up the printer icon in the task bar. The document name shows, the status says spooling then printing but nothing prints.
- Windows printer troubleshooter discovers no problems.
- HP troubleshooter discovers no problems.
- I can successfully print using another PC on the home network.
- Since this is a networked printer, I can actually see and select the printer driver from a networked PC from the PC in question, and this will print normally. In other words, when I bring down the printer list in Word for example, I see:
1) HP Officejet Pro 6230 (networked)
2) HP Officejet Pro 6230 on Old PC
If I select printer number 2, I can print but selecting printer number 1 does not cause a document to print.
- Services.msc reports that the Print Spooler is running and the Startup is Automatic. I have stopped/started it several time.- I have tried using printer with USB cable to PC but still won't print. - Windows event log shows Event ID 372 with each print attempt, details below.Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 7/14/2015 11:08:46 AM
Event ID: 372
Task Category: Printing a document
Level: Error
Keywords: Classic Spooler Event,Document Print Job
User: STEPHEN-PC\Stephen
Computer: Stephen-PC
Description:
The document Print Document, owned by Stephen, failed to print on printer HP Officejet Pro 6230 (Network). Try to print the document again, or restart the print spooler.
Data type: RAW. Size of the spool file in bytes: 96475. Number of bytes printed: 65536. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \\STEPHEN-PC. Win32 error code returned by the print processor: 2147500037. Unspecified errorI can't determine where the problems lies. Not sure what else to do other than maybe a Windows reinstall at this point to correct whatever part of the printer subsystem has gotten corrupted. Any ideas are appreciated. Thanks!

Welcome to the HP Community Forum. Perhaps during the removal of the offending software -- or as a result of the system not "settling in" after said removal, the File System is not "seeing" the prerequsite files needed to run the full driver set needed to run the print program. Some ideas==========================================================Windows Updates Windows 8.1 is very sensitive to Windows Updates. If you have not done so for a while -- and particularly because you have recently removed some files / software, you might make sure Updates are current to within about the past week ==========================================================If you are running your Windows 8.1 on a Notebook:Hard Reset / Forced reset Close running programs, browsers, and gamesNextCreate a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8 Close all your programs and shut down the computerDisconnect everything (little Unifier for the keyboard / external mouse can stay)Perform the Forced Reset for your notebook modelBoot the computer and log in==========================================================Fast Boot / Fast Startp Windows 8.1 is set up as a Fast Boot system -- as such, the programs needed to quickly get the system up and running are not always read from the disk during boot. Nice system and it saves time -- but it can bite your backside if anything is missing or needs to be started "from scratch" so-to-speak due to changes in the Operating System. Fast Startup - Turn On or Off in Windows 8 You might try switching "off" the Fast Startup and see if a "regular" boot clears the issue. ==========================================================Full Feature Software It might be that a combination of "clearing" the system -- switching off then back on Fast Boot and / or the Hard Reset -- and then removing and then installing the Printer's Full Feature Software would be helpful. You might consider the "Restart Everything" sequence shown in the document. Install Full Feature Software – Printer When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers.

MX452, appears to be connected but cannot print, error message "the printer is offline"

Hi everybody, I recently moved and lost the USB cord that I used for the computer to be hooked up to this printer. I followed all of the directions on how to set up the wireless printer without the cord. I got the message at the end that said I was connected, but I still cannot print! I keep getting a message that says "the printer is offline." PLEASE HELP!
Thank youDani =)

Hi DaniWok!
Welcome to the Canon Forums and thanks for your post!
To have a better understanding of your issue, please let everyone know what operating system (Windows Vista/7/8 or Mac OS 10.X) you are using. That way, the community will be able to assist you with suggestions appropriate for your product.
Any other details you'd like to give will only help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks!

I want to print front to back but the software always returns to back to front.

In Hp C4795 I want the print to be front to back , I hit the button for that to happen. I close out and use the printer. It prints back to front. No matter how many times I change it.

kathyws,
Are you changing it via control pabel, printer, perferences? And then click on Apply, then OK.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Creating a web based book publication with front and back covers

I have created a book in Indesign which is 12 pages inclusive of front and back covers, the problem I'm having is that when I convert the file into an SWF file the front cover has an extra page to the left of it and the back cover has an extra page to the right of it (these pages are not in my Indesign layots) I don't want these pages as I want the document to look like a book when I send it out. I'm assuming I haven't set the document up correctly? I have been on a number of tutorials but none of them seem to go into this. Some pointers would be really helpful.
Thank you.

You can do this in Elements. It will require planning for the layout, viz. height, and width of front & back covers, and space allocation in between for the spine area. Be sure that your printer can handle the document size.Once you have figured this out, you need to open a new, blank file of appropriate size and resolution.
There is available a grid which I find very helpful to facilitate alignment.
Each of your pictures, and the blank file (#1 above), should have a resolution of 240--300px/in for good result with printing.
The text can be produced with the type tool - optionally horizontal or vertical.
The pictures and text will each be on their own layers, and the move tool can be used to position these components

TS3992 I bought iPhone 5 but cannot delete iPhone 4S back up because it says it is in use

Help, I bought an iPhone 5 yesterday but cannot back it up to the cloud, because it says there is no room. I tried deleting the last back up from iPhone 4S but it will not delete because it says it is in use.

I don't know about the "can't delete" issue, but as to the storage problem...
The problem could be that you don't have enough storage on the device itself, not on iCloud. Go to Settings>General>Usage to see how much "Storage" you have available on the device. Farther down the list is the available storage on iCloud.
Also check:
Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud as well. Tap Show All Apps to get the complete list of apps and MB used for backup storage.
A device needs many MB of storage in order to perform a backup to iCloud.
Also see: http://support.apple.com/kb/ht4847`

Created a great form but cannot print front to back

Similar Messages

Maybe you are looking for