Created a new planning application ..while loggin in giving error as :.....

Created a new planning application with Admin id ..while loggin in giving error as :.....
Unable to obtain a connection to Hyperion Essbase. If this problem persists, please contact your administrator
Steps i followed :
1. created schema
2.created DSN on application servr
3.Created planning Applicaion from AppWizard plannig link
4.Application was succesfully created.
5.tried login into the plannig aplication got the boce error.
6.the application i not seen when i login with Admin id through EAS console ....
7.Applicaction is not created in essbase server also...i see in essbase server back end

Check out in shared services if the user is still provisioned with appropriate access, if not do it.
Try running updateusers utility because user dosent exists as NTLM and try creating the application again from Essbase and from Planning.
If it doesnt work then Create a new user with administrator access and In EAS refresh the security from shared services and try creating the essbase and planning applications using new admin. Check if it works.
Edited by: RahulS on Dec 2, 2010 4:12 AM

Similar Messages

  • Unable to create a new planning application in EPM11.1.3.1

    Hello Guru's
    I am not able to create a new planning application in the existing environment.
    In the last week i created a new application to migrate from prod to dev and it was successfull but it was failing to now for creating new app.
    When i checked the database connection and the essbase connection both are fine.
    I have checked the logs in the path
    D:\Hyperion\deployments\WebLogic9\servers\HyperionPlanning\logs
    Environment: 11.1.3.1
    error:
    <Jan 24, 2012 5:15:46 AM EST> <Error> <JMS> <som-epmdevapp02> <HyperionPlanning> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1327400146994> <BEA-040373> <Could not find a license for JMS. Please contact BEA to get a license.>
    Cheers,
    Raj

    check the logs clearly, i think schema/user doesn't have admin rights. please check with DBA team and try creating again.
    If you have DB admin access, you can create new schema/user and provide Full admin privilizes to the user (even you can ask your DBA team), then create DSN & validate, then try creating new application (make sure you are giving all correct info while creating app), it should work.....if still giving any error, please let us know what's the error in front end & at the same time check the logs.....
    with time stamp you tried to create application, logs will be there, check clearly you will definitly find the cause & issue.

  • Unable to create Database for new planning Application

    Hi all,
    I have Created a New planning application on Planning 11.1.1.3 using workspace.
    When i'm trying to create a database through administration -> Manage Database , im getting error saying
    com.hyperion.planning.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
    I tried Unlocking the application, using HspUnlockApp.cmd and it is returning a error, and im also unable find the HSP_LOCK Table
    Please let me know ur suggestions
    Thanks in Advance
    Edited by: Rao on Aug 8, 2010 8:57 PM

    Hi,
    There is definitely a table called HSP_LOCK in the planning applications repository, are you sure you are looking in the correct place.
    Anyway there is also a utility (HspUnlockApp) in the \planning\bin directory that should unlock the app and will save you having to mess around with any tables, more details :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch04s02.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • New Planning Application

    We are currently on Hyperion Planning 9.2. I have created a new Planning application in my test environment. I can see the application in the Planning Desktip. I have ran the Configuration Utility on the Shared Services server and updated my Hspjshome.properties file. We have restarted the Planning server and the Planning services. However, the Hspjshome.properties file on the Planning server has not been updated. I can see the new application in the Administration console but not in Shared Services or in the Planning Web. If I register it in the console, it tells me it is already registered. What am I missing? Do I need to run the Configuration Utility on the Planning server as well. Also, do I need to restart the Shared Services server.
    Thanks in advance for your help.

    Have you copied your updated Hspjshome.properties into the web application, sometimes it just updates the file but doesn't copy into the web application, once copied you will need to restart the planning application service.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • FR reports not working for new planning application

    Situation:
    Hyperion 9.2.0
    New planning application created and also registered to share services. One existing group have role assigned as 'Interactive User' and not able to perform operations on workspace (FR), FR Studio and Smart view. (Note: Admin can perform such activities and there is no error.)
    Key user receiving mention below messages while accessing FR report from workspace and using FR studio for particular report related to only new application. The existing FR reports on different planning application working fine working fine from workspace and FR studio. Here are the errors:
    *Workspace Error [Only for new application report]*
    [Wed Aug 24 15:04:35 2011]Local////Error(1051440) Analytical Services user [abcd] Authentication Fails against the Shared Services Server with Error [Failed to authenticate user abcd against provider Native Directory]
    *FR Studio [Only for new application report]*
    Error connecting to database connection XYZ: [Wed Aug 24 15:08:50 2011]<Server Name///abcd/Error(1051025) User abcd is not permitted to access application XYZ
    Smart View Error (Only for new application connection)
    Cannot open cube view. OLAP Error (1051025): User abcd is not permitted to access application XYZ.
    Analysis
    While looking Essbase, I identified that under security (User/Groups), group that have access as interactive user is not listed. Only I can see the groups that have admin roles. However I can see all other planning application successfully displayed groups associated to particular question.
    Please help to resolve the issue. I am new to this concept, so the detailed level description will help me lot
    Thanks
    Edited by: user10070515 on Aug 25, 2011 4:25 AM

    Hi
    Thanks For the replies.
    After the data is copied into the layout. User is changing the values of few key figures and saving. A new line item is created in the cube with the new values.
    Ex
    Cust ....qty.....Value....Revenue
    c100....10........100.....1000
    Changing the value in layout
    Cust ....qty.....Value....Revenue
    c100....10........150.....1000
    After saving in the cube
    Cust ....qty.....Value....Revenue
    c100....10........100.....1000
    c100....0........50..........0
    When the user execute the report revenue is not populating correctly. And i was expecing 150 *10 = 1500. I understood the issue. Can anyone tell me how can i achieve without updating the quantity how can i get this?
    Thanks
    Annie

  • Unable to Access New Planning Application via Workspace

    Hi all
    i have installed a new Planning server into the existing platform (there is no hardware load balancing so is seen as a single instance of planning) however i am using the existing workspace and HSS.
    I have successfully installed and configured the new Essbase and Planning Products and registered against shared services. The issue i have is that i cannot get the new Planning application to be viewable via workspace. I get Application is invalid.!!.
    The original (Existing) Planning on server 1 is set to 'Active Instance' in the product registration and these apps can be viewed by workspace etc.
    I have created Planning on Server 2 and have created a new instance, but not set the 'Active instance' in the product registration!!!, i have also registered this as the web host tier on the Server 2 not the Server1.
    If i use the direct planning URL's for either Planning Server 1 or Planning Server 2 i see the planning applications that are on each server!!
    Can anyone tell me what configuration i have missed out! If it helps the Planning Server 1 has its own Shared Services Project and Planning Server 2 has its own Shared Services project.
    I have restarted services on Server2 BUT not Server 1 as i am not allowed an outage until the end of the month!!.

    Hi,
    Did you create a new Planning app in your new environment? Can you access this new app as a test?
    You will need to asociated your app with an active instance and datasource.
    In the workspace, when you go to Navigate - Applications - Planning, do you see your Planning app or is it not there at all?
    Did you check the logs for any errors? Are you sure the user you are logging on to the Workspace as has been provisioned for that planning app?
    When you configured BI+ did you make sure you ticked Planning?
    Seb
    www.taysols.com.au

  • New planning application -bit urgent

    Hi experts,
    i have installed and configured planning 11.1.2. now , i am trying to create new planning application from workspace but i don't see command related to create new application under adminstration command.
    Can you please let me what went wrong...advance thanks.
    Thanks,
    Ganesh

    It maybe the account does not have the correct permissions.
    Maybe the web server has not been configured last.
    If you are really struggling and need to set up an application quickly you can go direct to planning
    http://<planningmachine>:8300/HyperionPlanning/AppWizard.jsp
    or
    Reconfigure workspace(Web Server only not data base) it will come workspace also

  • Create a new web application, how shall I update the file server.xml

    Hi,
    I will create a new web application, i.e named newApp. Then I create a file structure as follows:
    - <server-root>/newApp
    - <server-root>/newApp/WEB-INF
    - <server-root>/newApp/WEB-INF/classes
    Then I must tell the server that I have created a new web application. Then I must update my file server.xml, How shall I do this and where in the file shall I type in the new information?
    I use windows XP Pro, and Tomcat 4.1.27.
    My server.xml file looks like below:
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN" debug="0">
    <!-- Comment these entries out to disable JMX MBeans support -->
    <!-- You may also configure custom components (e.g. Valves/Realms) by
    including your own mbean-descriptor file(s), and setting the
    "descriptors" attribute to point to a ';' seperated list of paths
    (in the ClassLoader sense) of files to add to the default list.
    e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
    -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
    debug="0"/>
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
    debug="0"/>
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved">
    </Resource>
    <ResourceParams name="UserDatabase">
    <parameter>
    <name>factory</name>
    <value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
    </parameter>
    <parameter>
    <name>pathname</name>
    <value>conf/tomcat-users.xml</value>
    </parameter>
    </ResourceParams>
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Tomcat-Standalone">
    <!-- A "Connector" represents an endpoint by which requests are received
    and responses are returned. Each Connector passes requests on to the
    associated "Container" (normally an Engine) for processing.
    By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
    You can also enable an SSL HTTP/1.1 Connector on port 8443 by
    following the instructions below and uncommenting the second Connector
    entry. SSL support requires the following steps (see the SSL Config
    HOWTO in the Tomcat 4.0 documentation bundle for more detailed
    instructions):
    * Download and install JSSE 1.0.2 or later, and put the JAR files
    into "$JAVA_HOME/jre/lib/ext".
    * Execute:
    %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
    $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
    with a password value of "changeit" for both the certificate and
    the keystore itself.
    By default, DNS lookups are enabled when a web application calls
    request.getRemoteHost(). This can have an adverse impact on
    performance, so you can disable it by setting the
    "enableLookups" attribute to "false". When DNS lookups are disabled,
    request.getRemoteHost() will return the String version of the
    IP address of the remote client.
    -->
    <!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8080" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="100" debug="0" connectionTimeout="20000"
    useURIValidationHack="false" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to -1 -->
    <!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8443" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" scheme="https" secure="true"
    useURIValidationHack="false" disableUploadTimeout="true">
    <Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
    clientAuth="false" protocol="TLS" />
    </Connector>
    -->
    <!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8009" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" connectionTimeout="0"
    useURIValidationHack="false"
    protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <!--
    <Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
    port="8009" minProcessors="5" maxProcessors="75"
    acceptCount="10" debug="0"/>
    -->
    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8082" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" connectionTimeout="20000"
    proxyPort="80" useURIValidationHack="false"
    disableUploadTimeout="true" />
    -->
    <!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083 -->
    <!--
    <Connector className="org.apache.catalina.connector.http.HttpConnector"
    port="8083" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" />
    -->
    <!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
    <!--
    <Connector className="org.apache.catalina.connector.http10.HttpConnector"
    port="8084" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" />
    -->
    <!-- An Engine represents the entry point (within Catalina) that processes
    every request. The Engine implementation for Tomcat stand alone
    analyzes the HTTP headers included with the request, and passes them
    on to the appropriate Host (virtual host). -->
    <!-- You should set jvmRoute to support load-balancing via JK/JK2 ie :
    <Engine name="Standalone" defaultHost="localhost" debug="0" jmvRoute="jvm1">
    -->
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Standalone" defaultHost="localhost" debug="0">
    <!-- The request dumper valve dumps useful debugging information about
    the request headers and cookies that were received, and the response
    headers and cookies that were sent, for all requests received by
    this instance of Tomcat. If you care only about requests to a
    particular virtual host, or a particular application, nest this
    element inside the corresponding <Host> or <Context> entry instead.
    For a similar mechanism that is portable to all Servlet 2.3
    containers, check out the "RequestDumperFilter" Filter in the
    example application (the source for this filter may be found in
    "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
    Request dumping is disabled by default. Uncomment the following
    element to enable it. -->
    <!--
    <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
    -->
    <!-- Global logger unless overridden at lower levels -->
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="catalina_log." suffix=".txt"
    timestamp="true"/>
    <!-- Because this Realm is here, an instance will be shared globally -->
    <!-- This Realm uses the UserDatabase configured in the global JNDI
    resources under the key "UserDatabase". Any edits
    that are performed against this UserDatabase are immediately
    available for use by the Realm. -->
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    debug="0" resourceName="UserDatabase"/>
    <!-- Comment out the old realm but leave here for now in case we
    need to go back quickly -->
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <!-- Replace the above Realm with one of the following to get a Realm
    stored in a database and accessed via JDBC -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="org.gjt.mm.mysql.Driver"
    connectionURL="jdbc:mysql://localhost/authority"
    connectionName="test" connectionPassword="test"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
    connectionName="scott" connectionPassword="tiger"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="sun.jdbc.odbc.JdbcOdbcDriver"
    connectionURL="jdbc:odbc:CATALINA"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!-- Define the default virtual host -->
    <Host name="localhost" debug="0" appBase="webapps"
    unpackWARs="true" autoDeploy="true">
    <!-- Normally, users must authenticate themselves to each web app
    individually. Uncomment the following entry if you would like
    a user to be authenticated the first time they encounter a
    resource protected by a security constraint, and then have that
    user identity maintained across all web applications contained
    in this virtual host. -->
    <!--
    <Valve className="org.apache.catalina.authenticator.SingleSignOn"
    debug="0"/>
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.AccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <!-- Logger shared by all Contexts related to this virtual host. By
    default (when using FileLogger), log files are created in the "logs"
    directory relative to $CATALINA_HOME. If you wish, you can specify
    a different directory with the "directory" attribute. Specify either a
    relative (to $CATALINA_HOME) or absolute path to the desired
    directory.-->
    <Logger className="org.apache.catalina.logger.FileLogger"
    directory="logs" prefix="localhost_log." suffix=".txt"
    timestamp="true"/>
    <!-- Define properties for each web application. This is only needed
    if you want to set non-default properties, or have web application
    document roots in places other than the virtual host's appBase
    directory. -->
         <DefaultContext reloadable="true"/>
    <!-- Tomcat Root Context -->
    <Context path="" docBase="ROOT" debug="0"/>
    <!-- Tomcat Examples Context -->
    <Context path="/examples" docBase="examples" debug="0"
    reloadable="true" crossContext="true">
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="localhost_examples_log." suffix=".txt"
    timestamp="true"/>
    <Ejb name="ejb/EmplRecord" type="Entity"
    home="com.wombat.empl.EmployeeRecordHome"
    remote="com.wombat.empl.EmployeeRecord"/>
    <!-- If you wanted the examples app to be able to edit the
    user database, you would uncomment the following entry.
    Of course, you would want to enable security on the
    application as well, so this is not done by default!
    The database object could be accessed like this:
    Context initCtx = new InitialContext();
    Context envCtx = (Context) initCtx.lookup("java:comp/env");
    UserDatabase database =
    (UserDatabase) envCtx.lookup("userDatabase");
    -->
    <!--
    <ResourceLink name="userDatabase" global="UserDatabase"
    type="org.apache.catalina.UserDatabase"/>
    -->
    <!-- PersistentManager: Uncomment the section below to test Persistent
    Sessions.
    saveOnRestart: If true, all active sessions will be saved
    to the Store when Catalina is shutdown, regardless of
    other settings. All Sessions found in the Store will be
    loaded on startup. Sessions past their expiration are
    ignored in both cases.
    maxActiveSessions: If 0 or greater, having too many active
    sessions will result in some being swapped out. minIdleSwap
    limits this. -1 or 0 means unlimited sessions are allowed.
    If it is not possible to swap sessions new sessions will
    be rejected.
    This avoids thrashing when the site is highly active.
    minIdleSwap: Sessions must be idle for at least this long
    (in seconds) before they will be swapped out due to
    activity.
    0 means sessions will almost always be swapped out after
    use - this will be noticeably slow for your users.
    maxIdleSwap: Sessions will be swapped out if idle for this
    long (in seconds). If minIdleSwap is higher, then it will
    override this. This isn't exact: it is checked periodically.
    -1 means sessions won't be swapped out for this reason,
    although they may be swapped out for maxActiveSessions.
    If set to >= 0, guarantees that all sessions found in the
    Store will be loaded on startup.
    maxIdleBackup: Sessions will be backed up (saved to the Store,
    but left in active memory) if idle for this long (in seconds),
    and all sessions found in the Store will be loaded on startup.
    If set to -1 sessions will not be backed up, 0 means they
    should be backed up shortly after being used.
    To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
    and minIdleBackup all to -1, saveOnRestart to false, then restart
    Catalina.
    -->
    <!--
    <Manager className="org.apache.catalina.session.PersistentManager"
    debug="0"
    saveOnRestart="true"
    maxActiveSessions="-1"
    minIdleSwap="-1"
    maxIdleSwap="-1"
    maxIdleBackup="-1">
    <Store className="org.apache.catalina.session.FileStore"/>
    </Manager>
    -->
    <Environment name="maxExemptions" type="java.lang.Integer"
    value="15"/>
    <Parameter name="context.param.name" value="context.param.value"
    override="false"/>
    <Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
    type="javax.sql.DataSource"/>
    <ResourceParams name="jdbc/EmployeeAppDb">
    <parameter><name>username</name><value>sa</value></parameter>
    <parameter><name>password</name><value></value></parameter>
    <parameter><name>driverClassName</name>
    <value>org.hsql.jdbcDriver</value></parameter>
    <parameter><name>url</name>
    <value>jdbc:HypersonicSQL:database</value></parameter>
    </ResourceParams>
    <Resource name="mail/Session" auth="Container"
    type="javax.mail.Session"/>
    <ResourceParams name="mail/Session">
    <parameter>
    <name>mail.smtp.host</name>
    <value>localhost</value>
    </parameter>
    </ResourceParams>
    <ResourceLink name="linkToGlobalResource"
    global="simpleValue"
    type="java.lang.Integer"/>
    </Context>
    </Host>
    </Engine>
    </Service>
    </Server>

    To use servlets u have indeed to update your web.xml...Well I'm not sure this is relevant to your case anyway.
    You have to add a <servlet> element to this file.
    Something like this:
    <servlet>
    <servlet-name>blabla</servlet-name>
    <servlet-class>blablapackage.Blablaclass</servlet-class>
    <init-param>...</init-param>
    </servlet>
    Now this may not solve your problem. Make sure you refer to your servlets using their full qualified names.btw, just to be sure, what is your definition of "servlet"? (i mean: any java class or only javax.servlet.Servlet)

  • Create a new plan in OEM

    Hi,
    I'm having an issue with one huge sql query and want to create a new plan for it. How do I create a new SQL plan in OEM? Someone please help me? Thanks.
    JW

    I figured it was that simple.
    I haven't seen you on here in awhile.

  • How to load new planning application in EPM 11.1.1.2-DIM ESSBASE ADAPTER

    how to load new planning application in EPM 11.1.1.2-DIM ESSBASE ADAPTER

    If you trying load metadata into planning using DIM then have a look here :- http://www.oracle.com/technology/obe/hyp_fp/DIM_Planning/OBE_Dim_Planning.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Steps to create a new Oracle Application server

    I am in unfamiliar territory and need to create a new Oracle Application Server. I would appreciate any direction or direction to documentation that explains the steps required to establish a new server. Thanks.

    William,
    Have you looked at the Portal section on OTN? We recently added a whole bunch of information under the documentation section.
    It can be found by clicking on Internet Servers under the Products heading on the left hand navigation bar. That page will have a section for Oracle9i Application Server and under that you will see Related Features & Products where there is a link to Portal.
    Rich

  • Where I can creat a new portal application?

    hello:
       I want to <u>Create a new Masthead Component</u>:
      a) Go to System Administration – Support – Support Desk – Portal Runtime – Browse deployment. Navigate to ROOT/WEB-INF/deployment/pcd and select file com.sap.portal.navigation.masthead.par.bak. Click the download link. Open the zip file and extract it to your local file system.
      b) Open Eclipse and <u><b>create a new portal application project</b></u> based on the par file (File – Import – PAR file).
    my problem is I don't know where I can creat a new portal application?Do I need download a software?
      anyone can help me ?And give me the tool!
      thanks in advance!

    Hi,
       For NW2004s you can download from <a href="https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6">here</a>.
    The steps for installation are:
    1.Begin installation by executing JDTSetup.exe
    2.Enter installation directory where u wish to install.
    3.You will have to enter your Java SDK directory. NDS needs at least 1.4.2 version or later.
    4.Enter folder name for workspace storage: C:\NWDS\Workspace or C:\SAP\JDT\Workspace
    5.After installation is finished start Developer Studio by going to SAP Netweaver Deveoper Studio icon on your desktop.
    6.Open EP Perspective by going to Window->Open Perspective->Other->Enterprise Portal
    Hope this helps.
    Regards,
    Pooja.
    Message was edited by:
            Pooja S

  • Considerations about creating a new plan infocube

    Question is too generic and please search the forums before posting
    hi gurus!
    what r the considerations about creating a new plan infocube?
    best regards
    Edited by: Arun Varadarajan on Jun 2, 2009 3:19 AM

    Hi Arun,
        One important thing to note regarding a planning cube is that, the data can be entered in to it through the BEx tools as a APO request. But one prerequesite here is you have to first create an aggreation level on top of the planning cube and then create a query on this aggregation level.
    Now if you open this planning query in Analyzer or WAD, then you will be able to enter data from there and even save it back to the cube as APO requests. (Manual planning)
    With Best Regards,
    Balajee.

  • Added user as Farm Admin - still can't create a new Web Application

    What exactly does it take for someone (assuming through Central Admin) to be able to have enough permissions to create a new Web Application?
    I just added one of our developers as a Farm Admin, and the 'New' button is disabled for him, so he can't create a new Web Application.

    As I mentioned in my post.  To create a Web Application you need to be both a Farm Administrator and a local administrator on the server.  You said he was a farm admin.  Was he also a server admin on the server?
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Need create a new control key, which message control is "error mode", then PR or PO

    Hi All,
    Can please help me I got an issue in QM ,
    Issue Description :-  Current QM control key for supplier validation date is “0001”, the message mode is only warning. PR or PO still can be created forcibly. Need create a new control key, which message control is “error mode”, then PR or PO cannot be created successfully.
    I thing should add some additional logic using BADI or USER-EXIT.
    can please help me how to find BADI or USER-EXIT if you know the appropriate BADI please let me know.
    Regards,
    Nani

    Hi,
    I tried that way I entered message control as Defect even purchase requisition is created how can I restricted purchase request ion.
    Regards,
    Nani.   

Maybe you are looking for

  • Which cpu with blackmagic intensity pro for SD stream ( 1 Mbs)

    Hello, when encoding with DV my quad core Q6700 tops to 15 % CPU usage for h264 SD live streaming (< 1 Mbs). How would encoding from an HD or SD-SDI card go (such as BM Intensity Pro)? is the cpu fast enough or should I turn to core i 7? thanks.

  • S_P99_41000101 - Check Register Modification to include new fields

    Dear Friends, We are working in 4.7V. The user wants to include new fields in Check Register. Special G/L ind. Demand Draft No GL Code Material Code How to include the new fields and how to match Material code to check no or payment or vendor. Please

  • How can I prevent Aperture from deleting pics while tethering?

    Using Nikon D90 & Aperure 3 on a brand new iMac. Now Aperture is deleting pictures without asking as they import (tethering) to the current aperture project. Aperture 2 gave us the option of storing the photos in the memory card as well. It's always

  • Add new field in selection-screen and output dynamically

    hi gurus,   i need to add field in selectio-screen. i need to validate the field with existing fields. i need to add this in alv grid output list dynamically. thanks & regards,    kgn9.

  • Read number of channels dynamically

    Hi , I have a test file in .dat format.  Normally we will have 4 channels. Time, Accleration1 and Accleration2, Upper Limit and Lower limit. Where I plot Time v/s Accleration1 and Accleration2. In future, test file may contain Accleration 3, Acclerat