Created and closed A/R credit memo and A/R invoice

Hi All,
How to know who has created and closed A/R credit memo and A/R invoice ? I see
the credit memo sometimes created based on A/R invoice but none the user's create
it. Tks.
Rgds,

Hello,
you could use change log, from tools --> change log to see who has closed or created a certain document. It is a history record tools. It is from ADOC, OUSR and other related tables.
Rgds,

Similar Messages

  • FV70 AND FV75 parking customer credit memos and invoices

    Hi,
    I have two questions related to the parked customer invoices and credit memos :
    1 )It is any way to enhance those two transactions ( FV70 and FV75 ) with a new business transactions , customer debit memo ?
    2 )When I try to use FV70 to park  a customer invoices, I am getting an error message " Document type DR not defined " even though DR is defined as a document type.
    Please let me know
    Regards
    Csaba Deac

    Hi,
    I am getting the same error message with FB70 : "Document type DR not defined"
    Regards
    Csaba Deac

  • AP Credit Memo and Good return, creates differences between TB and Stock Audit Report

    Hello Experts,
    Did any one has ever faced an issue, whereby AP Credit Memo and Good Return creates discrepancy between journal entry and the stock audit report?
    Here is the scenario:
    AP Credit Memo
    Description
    Quantity
    Unit Price
    Total
    Item A
                    30
                3,400
       102,000
    Journal Entry :
    Debit
    Business Partner
         105,000
            Credit
                          Stock
         105,000
    Inventory Audit Report
    Description
    Quantity
    Cost
    Transaction Amount
    Item A
                            30
                         3,500
                                                    105,000
    Journal Entry :        
    Debit
    Business Partner
         105,000
            Credit
                          Stock
            105,000
    The difference is actually due to the moving average, but the strange part is why the difference is not posted in the journal entry, in the Price different account?
    This makes the stock account amount to be different from the Trial Balance and the Stock Audit Report.
    And this is applied also on the Good Return transaction.
    Any help is highly appreciated.
    Best Regards
    Cedric Kayitare

    Hi Cedric,
    Price & Item cost are different.
    while making goods return , Direct AP Credit Note, Sales Delivery, Direct AR Invoice, stock is going outside.
    In these transactions Journal entry will happen for Item cost and not Item sales or Purchase price.
    Please enable item cost field in line level and check whether above formulae is matching with Item, cost field.
    Then what is the importance of price in these documents??
    Price is the agreed selling or purchase price for trading with Customer and supplier.
    In your example
    You are returning back material worth 105000(as per moving average price), but supplier is supposed to give only you 102,000.
    Hope you understand
    Thanks
    Unnikrishnan

  • Idocs to create credit memo and debit memo

    Hi,
      I need your expertise in creating credit memos and debit memos in sap using idocs.
    I am working on integration between third party system and sap using web methods.
    My requirement is to create credit memos and debit memos in sap using idocs.
    Could you please help me with the message types for the credit and debit memos.
    Thanks
    Raju

    Hi VJ,
    thank you very much.
    Is it possible to create credit memo without any reference to document in SAP.Because the third party system only sends very small amount of data
    (customer number, amount, paymentmethod, date).
    Can i be able to create the credit memo with the above information
    Please help me..
    Thanks
    Raju

  • Credit Memo and Goods returned

    Dear Sap Gurus,
    The scenario is as follows:-
    Eg. GRN done for 100 Qty and Invoice verification also done for 100 Qty.Now, 2 Qty found defective and are to be returned back.
    As per SAP standard, first create credit note and then create returned
    delivery of the material (122-Q movement type).
    Now, is it possible in SAP to create the returned delivery before
    creating the credit note? If NO, kindly give your inputs.
    Regards,
    Divyesh.

    Following is the satandard flow
    Material PO 100 Nos
    GR              100 Nos
    IR                100 Nos
    Now 2 pieces are rejected
    You are sending back with 122 Mvt Type
    Then you raise credit memo for 2 qty.
    is it possible to do returned delivery(122 Movement Type) first and then do the credit memo
    Answer Yes ( But in std SAP this you will have to track manually)
    or write a user exit (you will have to find BADI)  at save event of return delivery to do credit memo in background, so that your purpose will automatically solved.
    Regards
    Kedar

  • Issue related to the Credit memo and S.O.

    Hi,
    I have one issue related to the Credit memo and S.O.
    We have a network of Dealers and Dealer inventory is linked with our system. When user creates S.O for Dealer1.If the item is not avail in our inventory and it is avail in any other Dealer inventory (Dealer2), then the system creates S.O wrt the Dealer2.
    In this case as the material is directly delivered from Dealer1 to Dealer2, there is no any GI in our system.
    So, the transaction with Dealer1 will be the normal as usual. But, we have to return the goods amount to the Dealer2 with any suitable way. We are considering it as a Credit memo.
    My question is, as we have created S.O wrt the partner function- Dealer1 and we are creating CR memo for Delaer2, is there any way through which we can link the se two transactions with customizing so that we need not to make any ABAP programming.
    I mean can we create Cr memo wrt S.O when the partner functions are different?
    Pl. guide me.
    Thanks,
    Roopan.

    You have an interesting Scenario.
    You can handle this scenario in multiple ways
    1. Third party Scenario (Here Dealer 1 becomes Vendor &Dealer 2 remains Customer)
    2. Order related sales & credit memo.
    3. Intercompany sales, where you represent dealers place as a plant in your system. (Not an ideal way to handle the scenario, but possible option)
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Credit memo and mandatory fields in Sales order

    Dear all,
    I have 2 problems, hoping these are not too basic questions I'm asking here.
    1). I have created a sales order for credit memo's and I'm using the standard billing type G2.
    The amounts are negative in the order & in the billing document, however, when transferring to FI, it is posted as a normal invoice (Debit customer) instead of credit memo.
    Where are the posting keys defined or where do you determine which kind of posting will happen in FI based on the billing document?
    2). When creation a sales order (VA01), the sales office and sales group should be mandatory fields. What is the best way to do this? Or is the only option to go via the document completeness check?
    Many thanks!
    Best regards.

    Hi There,
    > 1). I have created a sales order for credit memo's and I'm using the standard billing type G2.
    > The amounts are negative in the order & in the billing document, however, when transferring to FI, it is posted as a normal invoice (Debit customer) instead of credit memo.
    >
    > Where are the posting keys defined or where do you determine which kind of posting will happen in FI based on the billing document?
    This is the standard SAP behavior. Simple thing, All the values are negative so when it will post to FI
    It will be like
    Dr  Customer Invoice amount ( which is negative ) so end result is +ve. ( as Debit is -)
    I hope its understandable.
    For example:
    While creation of simple invoice say of 1000 $
    Entries were Dr Customer 1000 $
                         Cr Revenue    1000$
    Now After Credit memo
                        Dr Customer    -1000 $
                         Cr Revenue    -1000 $
    Which will nullify each other.
    > 2). When creation a sales order (VA01), the sales office and sales group should be mandatory fields. What is the best way to do this? Or is the only option to go via the document completeness check?
    The best way is to include these two fields in the Sales order incomplete procedure in OVA2. Put Error/warning as required by you.
    Thanks,
    Raja

  • Regarding credit memo and debit memo

    Hi Friends
    In how many ways we can create credit memo and debit memo?
    plz reply
    thanks in advance

    Hi Venkata,
    Credit memo is billing document type.
    You can create it with the refrence of
    Credit memo request,
    Order
    Invoice
    Refused delivery return
    Regards,
    MT

  • Credit memo and debit memo

    Can some one kindly explain the img config step by step and how to check this setting in easy access.
    Thankyou in advance
    Rewards are assured
    Best regards,
    R.Srinivasan

    REFER BELOW REWARD IF HELPS
    Debit note and Credit note?  What is the purpose?  How we create?
    1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods.  A debit memo is a transaction that reduces Amounts Payable  to a vendor because, you send damaged goods back to your vendor.
    2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
    You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning  credit memos and payments to the open invoices and carry out clearing with them.  If you use both Financial Accounting (FI) and Sales and Distribution (SD),  there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
    For  credit memos, credit memo requests, and payments, you have the following assignment options:
    - Assignment to a single invoice
    - Assignment of a partial amount to an invoice
    - Assignment to several invoices
    When you post  credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount.  Then you can apply a multilevel dunning program.
    3.  Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is  like a standard order. The system uses the debit memo request to create a debit memo.
    4.  As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo  request. You can create the debit  or credit memo requests in the following ways:
    – Without reference to an order
    – With reference to an existing order
    Here you enter which order the complaint refers to.
    – With reference to an invoice
    Here you enter which invoice the complaint refers to.
    In all cases, you specify the value or quantity that should be in the credit or debit memo
    5. You can block the credit or debit memo  request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section.  This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo  can then be approved or rejected.

  • Credit memo and subsequent GL account

    Dear All,
    I would like to clarify 3 point below.
    when i do credit memo on full quantity, the double entry is hitting vendor and GRC account.
    when i do credit memo on part quantity, the double entry hitting vendor GRC and stock account also.
    when i do subsequent debit or credit, double entry hitting vendor and stock account.
    1) May I know why credit memo, full quantity only hit GRC whereas part quantity hit GRC and stock?
    2) May i know why subsequent debit/credit hitting stock account only?
    3) credit memo must have to create return PO? without return PO can?
    Thanks

    Hi
    credit memos and subsequent credits can be used to adjust the amount due to the vendor.
    we usually receive a credit memo from a vendor if you where overcharged.
    as in case of invoice .creit memo refer to purchase orders or good receipt
    when you post credit memo,the total invoice quantity in the po history is reduced by the credit memo quantity.the maximum quantity you can make a credit for is the quanitty that has alredy ben invoiced.
    During Credit Memo, It is making same accounting entires as it makes during Invoice posting
    Regards
    kailas ugale

  • Credit Memo and AR Invoice Query

    Hi Everyone,
    I'm fairly new to query writing and need to write a query that would list all of the credit memos and invoices.  I was able to write the following query that pulls just the AR Invoice info.  How do I also pull the AR Credit Memo info? 
    SELECT T0.[CardCode], T0.[DocNum], T0.[DocDate], T1.[Quantity], T1.[ItemCode], T1.[PriceBefDi], T1.[StockPrice] FROM OINV T0  INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry ORDER BY T0.[CardCode], T0.[DocNum]
    When using the generator it does not link the tables together in any fashion.  I tried to just add the ORIN and RIN1 tables to it (as I can just have them listed below the invoices), but SAP appears to just lock up and I end up closing the application. 
    I searched the forum as well and found that there is a link between the two and it is:
    RIN1.BaseEntry = OINV.DocEntry
    and
    INV1.TrgetEntry = ORIN.DocEntry
    However, when I try to add these joins to the query, it ends up showing a credit memo for every single line, and I know that is not correct.  I know there are different types of joins, so perhaps I'm using the wrong join or something?
    I appreciate anybody's help.
    Thank you,
    Amanda

    Hi Amanda,
    Try this one:
    SELECT T0.CardCode, T0.DocNum, T0.DocDate, T1.Quantity, T1.ItemCode, T1.PriceBefDi,
    T1.StockPrice FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry
    UNION ALL
    SELECT T0.CardCode, T0.DocNum, T0.DocDate, T1.Quantity, T1.ItemCode, T1.PriceBefDi,
    T1.StockPrice FROM ORIN T0 INNER JOIN RIN1 T1 ON T0.DocEntry = T1.DocEntry
    ORDER BY T0.CardCode, T0.DocNum
    Thanks,
    Gordon

  • Difference between Rebate Credit Memo and Credit Memo

    Dear Experts,
    Can an

    Credit Memo:
    Credit Memo issued for the price difference or if over billed . Credit memo always assoicated with Quantity and price.
    Rebate Credit Memo:
    Rebate credit memo is issued for the accruals ( Discount amount disbursed to the customers based on agreement).
    Rebate credit memo cannot be created manually in VA01. Accrual amount is calculated by the system based on the settle periods maintained in the rebate aggreement however accrual amt can be changed manually in Aggreement.
    Contact for further clarifications
    Senthils

  • Header Billing Plan - credit memo and debit memo

    Folks,
    I have the following scenario here.
    I have a billing plan order (BP) - with header billing plan.
    I have three lines in the billing plan
    1) $5000 ...FAZ (Billing Request)
    2) $10000...L2 (Debit Memo)
    3) $3000...G2 (Credit Memo).
    Once i go to VF04,
    I have all three billing due. However, only billing type FAZ has the header conditions (PR00, AZWR, TAXES) populated and net value $5000. (Populated against AZWR)
    Both L2 and G2 have no header conditions populated and the net value is 0.
    The copy control is set up the same for all and all have same document pricing procedure (A).
    Is it something basic I'm missing or is there anything else I have to do?
    Or pls let me know the process for debit memo / credit memo with a billing plan.
    Pls respond ASAP as we have the Proof of Concept scheduled sooner.
    Helpful answers will be rewarded promptly!
    Thank You,

    Hello,
      I think that basys of this process is not correct: the purpose of billing plan is to define different invoicing schedules, typically for businesses working with projects, and on top of that, billing plan is the only standard way to manage advance payment and automatically determine the settlement of the advance payments on final invoices.
    For this, in my opinion it's not correct entering in the billing plan items with Credit Memo or Debit Memo request. You should have only andvance payment items and invoice items (document category = M).
    In a common invoicing process, you can have the following steps:
    - Down payment request (FAZ);
    - Invoice (F1) reduced by the downpayment amount (if that is the case);
    Then you can create a Credit Memo request, against the Invoice, if for some-reason you have to revert back something to the customer; or you can create a Debit Memo request if you have recharge the customer with reference to a document already invoiced. I think that invoice type G2 and D2 should not be "planned" steps in an invoicing process. On top of that, it's not advisable creating Credit Memo requests with reference to an invoice containing downpayment clearing item, as it would lead to incorrect postings into accounting.
    Hope to be useful.
    Best regards,
    Andrea

  • Open quantity in credit memo and debit memo

    Dear Friends,
    I am facing one problem in billing cycle. I am creating credit memo directly with ref to invoice(With out cr memo request). I am describing  scenario below.
    I have created Invoice 8012003 with one item with 10 quantity, after that I am creating credit note with ref to Invoice no 8012003, here I am creating credit note with 3 qty. Sub subsequently when i create credit note with ref to invoice number 8012003, in open billing quantity system is showing 10 quantity instead of 7.
    I have used copy requirements 027 and billing quantity field is disabled.
    Kindly advice.
    Kaushal

    Hello ,
    you could check the field VBRP-POSAR in your credit note .
    If it's 'A' , it's only a value position.
    That could come from table TVAU , field VAUNA -
    the last part in copy requirement 027 .
    Regards Wolfgang
    Dear Wolfgag,
    Thanks a lot for your kind reply, k've checked, VBRP-POSAR is 'A' in and VBRP - AUGRU AUFT is blank. Please let me know whether order reason is affecting open quantity field or i've modify routine 27 for  passing value ' '(Standard Item) instead of 'A'(Value item).
    Please note that i am creating credit memo direct ref to invoices.
    Thanks a lot in advance.
    Kaushal

  • Diff bet credit memo and credit memo request

    Hi
    Can any one tell the difference between Credit Memo and Credit Memo Request
    Thanks in advance

    Hi,
    Below is the information on crdit memo request.
    Definition: A credit memo request is a sales document used in complaints processing to request credit for a customer.
    Use: If the price calculated for the customer was too high (for example, with the wrong scaled prices or because a discount was forgotten), you can create a credit memo request. The credit memo request can be automatically blocked for checking. Once it has been approved, you can remove the block.The system uses the credit memo request to create a credit memo.
    Structure: A credit memo request is another type of sales document like a standard order. For more information on sales documents, see Working with Sales Documents.A credit memo request starts the billing process.
    =============================================
    Below mentioned is the information on Credit Memo.
    Definition: The term credit memo always refers to a credit memo from the vendor. Therefore, posting a credit memo always leads to a debit posting on the vendor account.
    Use: As in the case of invoices, credit memos refer to purchase orders or goods receipts. They are used to correct the purchase order history if the quantity invoiced was too high, for example, if an invoice was too high or if part of the quantity was returned.
    When you post a credit memo, the total quantity in the purchase order history is reduced by the credit memo quantity.
    If you do not want the total quantity invoiced to be reduced, you must post the credit memo as a subsequent credit.
    Hope this helps. Please let me know if you need more information and please assign points.
    Rgds
    Manish

Maybe you are looking for

  • Word wrap with Flex 4

    Hi, Can someone help me in getting a wordwrap in Spark. Below is my code. Any help regarding this is highly Appreciated I  am trying to get wordwrap within a spark component, but I couldn't. Can someone fix this. Usoing Label or richtext or any contr

  • Basic demo and mail merge

    Mark, I have installed your basic demo on 10Gdb and it works great. One of the requirement is to create an application similar to MS Word Mail merge utility ( using mail merge utility , a word template 's variables are populated by a data file or fro

  • Volume buttons on a Compaq CQ61-313US

    My volume buttons do not work properly on me laptop. I have a Compaq CQ61-313US. I just got this laptop yesterday, December 1st. When I click on the plus, minus or mute, it does nothing. I have to change the volume with the volume icon in the taskbar

  • Before Firefox 4, the plug-in was located on the bar on the bottom. Now it resides only as a sidebar. I was wondering if that could be changed back somehow?

    The plug-ins that were at the bottom bar which are now only reside in the sidebar were Yahoo Mail Notifier and Webmail Notifier

  • Owner in ManyToMany Relationships

    Hello all, I need to create a many to many relation between some roles and some policies. I do not want to cascade PERSIST, or REMOVE. So when creating the relation both the Policies and Roles involved are in the database. Also the relation are done