"created by" not displaying in VL10A

Hi ,
In VL10A , there are no values displaying in field "created by".
But it is working correctly for line item level in t-code VL10C.
Since it is Standard transaction hence please let us know if there is any note related to this issue.

Hello,
Do you have any instance on this machine? If not, then create one with minimum requirements for test and after creation launch dbca again and see if delete database listed as one of the options. If it fails to show as one of the option, though you can delete manually a database too but contact oracle support or open a SR.
Regards

Similar Messages

VALUE CREATED, but not DISPLAYED IN QUERY

Hi dear all,
I have created a value under InfoObject A by going to RSA1.
Now while creating a Query, i have to use this value.
But this created value is not seen under that Navigational attribute,
B__A
What shud i do???
Need Help..
Thanks,
Sowrabh

When you right click on the Charachteristic and say restrict. You are not able to find the new value. Is this your issue??? try the folloiwng.
In 3.5
Right Click on the Characteristic and say restrict and go to fixed values.
At the Bottom you can see a Display Other Valu Option(Yellow-green Colour Arrow)
Click on that. this opens a new window.
In this Window uncheck the Only Values From infoprovider
Also uncheck the Authorized Values Only Checkbox
Also Set the Number of Displayed Values to All
Now Click OK. This will show you all the values for that particular Characteristic.
In 7.0
When u restrict a Charachteristic, u will see an option called Setting which is on top
When u click on that it will open a new Window . In that window, select value restrictions.
in that select the Radio Button All values And Read Mode Setting as Values in Master data.
Thsi will give you all the values

Contact Modify & Create Date not displayed in Address Book

I use the create & modify date a lot in Microsoft Outlook's contacts. Although those fields are supported and updated by the Apple Adderess Book, I can't see a way to display or sort on those in the Apple Address Book.

After several days of trying, i finally seem to have it working. What i ended up doing was exporting my backing up my addresses on another computer that still had Snow Leopard on it. I exported both as .abbu and vCards. I was then able to get the vCards into iCloud.
Problem was, i could not get them to import into Contacts in Mavericks. I could not even add the iCloud account to contacts. It would let me sign in and choose contacts, but iCloud never showed up in the accounts nor did the contacts show up in Contacts.
After trying repairing permissions and resetting the PRAM to no avail, it occured to me to delete the Address Book folder from /Library/Application Support
Once that folder was gone, i was able to add iCloud to the accounts and import the .abbu file from Address Book.
So if you did not export your Address Book contacts before updating, you will need a second computer that is still running Snow Leopard to export the contacts. Then you can delete the Address Book folder from the Library and you should then be able to import the contacts into Contacts on Mavericks.
Hope this helps.

SCVMM created VMs not displayed in Failover Cluster Manager

I have a 2012 Hyper-V failover cluster setup and recently added SCVMM 2012 SP1 to the mix so I could perform some P2V migrations and familiarize myself with its other many capabilities. I noticed that if I create a VM inside SCVMM it doesn't show up in the
FCM UI with the other VMs I created from FCM. VMs that you create in FCM do get picked up by SCVMM however. Is this by design?
Thanks,
Greg

For my issue above, this was because I'd not noticed and thus not ticked the box on the Live Migrate wizard that says "Make this VM highly available".
I moved the VM out of the cluster, manually deleted the failed "SCVMM <VMName> Resource", then moved the VM back onto the cluster again but this time ticking the box to make the VM highly available. All looked fine in failover cluster manager.
I do rather wonder why SCVMM designers think I might want to migrate a VM onto a Hyper-V cluster and NOT want it to be highly available...? Likewise, to be able to move the VM back out again to a standalone host once it's correctly in the cluster, you have
to untick the "Make this VM highly available box". Surely this should just be done automatically in the background?

I've been using FCP 7 on my iMac for quite some time with great success. Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug) I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years. I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

YOU ARE A LIFE SAVER! I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

Newly created images will not display in Firefox 8 for Mac. Same images appear in other browsers. Why?

1. Specific new images are uploaded but will not display in Firefox 8 on my Mac with OS 10.6.8. (Does appear in other browsers, e.g., Chrome and Opera, and appears on Firefox 8 for PC.) Also, other images on the page display.
2. I have cleared cache, cookies, etc., in Recent History, and restarted both application and computer.
3. I've tried creating GIF, JPG and PNG, but none show on the page in Firefox on my Mac. I can see the offending image in other browsers such as Chrome on the same computer, and on Firefox on PC. Offending pages are in both PHP and HTML: http://www.brookfieldcivic.org/advertisers.php and http://www.brookfieldcivic.org/advertising_freedom_montessori.html
Image links: http://www.brookfieldcivic.org/images/advertisers/freedom.png and http://www.brookfieldcivic.org/images/advertisers/Freedom_Montessori_bizcard.jpg

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.

If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser?

Why exchange rate is not displayed correctly when I create the PO in SRM?

Hi Gurus,
Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
But when the PO is transmitted to R/3, the exchange rate is the correct.
My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

Hi Muthu,
I'm in Extended classic.
I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
Two checks of budget exist:
1.- When creating PO (exchange rate date of delivery date of the SC's item)
2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
Now my question is: It is a standard behavior? (to take different exchange rate)

FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6

Could you please attempt to shed some light on why FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6, yet apple finder is able to display thumbnails for these same FLVs without issue?
I'm running CS6 Production Premium with ALL updates installed on 10.6.8
I appreciate any input and help provided the input is provided by someone who either
A) knows the answer because they actually work for adobe
B) actually tried this themselves before attempting to provide a solution
If the conclusion is that it is a codec issue or a header issue with the FLVs You'd have to present a very strong case to back that claim up as it makes no sense whatsoever that CS6 is unable to generate thumbnails for media encoded using CS6, yet Apple finder can without issue. NOT to mention the FLVs in question are CREATED on the same machine with the same codecs installed that is trying to generate previews in Bridge.
Apologies if my frustration is showing, I've gotten and seen several... incompetent replies on this forum regarding this issue and it has never been actually addressed properly as far as I can tell by Adobe support.

We are all just incompetent users here. As pointed out before this is just a user to user forum, Adobe rarely checks in.
I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

Unicode character not displaying when PDF is created using PDFMaker

Using Adobe Acrobat Pro 9
Our company letterhead contains a special character (Unicode 25AA "Black Small Square"). When a PDF is created of a Microsoft Word document (2003 or 2007) using the PDFMaker, that character is not displayed in Acrobat (shows as whitespace). Strangely enough, if I search for the character in that PDF file using the Acrobat search function (query "u/25AA"), the search finds the character, but again, it is displayed as whitespace.
However, if I create a PDF from that same Word document by printing to Adobe PDF, the character displays correctly in Acrobat. Additionally, if I do a SaveAs to PDF (Using the Microsoft plugin), the character displays correctly in Acrobat. This leads me to believe that muy issue is related to the PDFMaker (as opposed to the PDF printing function) and how the character is embedded into the PDF file. I have tried opening the PDF in other versions of Acrobat, but I get the same result.
Any suggestions? We would like to utilize the convenience of the PDFMaker for our letters and reports, and not have to use the print function. I can email a sample of all the PDF's I spoke of upon request, but the issue should be reproducable using the following steps:
1. Open MS Word and type (or copy from the Character Map) unicode character 25AA in Arial font.
2. Save Word file.
3. Use PDFMaker to create PDF file.
4. Open PDF file and view results.
Any guidance or help is appreciated.
Phil Hinton

First, check the fonts in the PDF to be sure that they are not embedded (you are likely correct that there is a problem). What job settings are you using. Try the press or print. Also check the job settings to be sure that ALL fonts are to be embedded.
Also, check the log file of Distiller (set it to not be deleted in the settings). If there is an issue with the license of the font then the font will not be embedded. In that case you need to find a licensed version of the font or change to a different font.

Newly Created Infoobjects are not displaying in the RSA1

Dear Experts,
When ever i am trying to create a new Info Object Characterstic/Keyfigure, i am able to create and activate it sucess fully, but when i am trying to see the same in corresponding infoobjects catelog in RSA1 that object is not displaying there.
When i am trying to find the same using "FIND' Option it is returing 'No Entries' as result even though i am sure that obj is created.
Please help me in this context.
Regards,
Rajkandula

Have you created that Infoobjects under a specific Catalog.If it is true try to find that catalog and you can find the Infoobjects there. If it is not true they will be under Unassigned nodes. Otherwise refresh your transaction once and try to find the Infoobject with find option.
I hope it will help you.
JM Krishna

Issue in query created on infoset - characterstic values are not displayed

Hi,
We have created a query based on an infoset(customized). In this query, values of only one object(sold-to-party) is not displayed. Where as for the same object, values are displayed in the other query created based on the respective ODS.
note : Query based on infoset is alone not coming.
This is the description of the error -
System error in program CL_RSMD_RS and IF_RSMD_RS-READ_META_DATA-02. and it is showing (No entries found).
And apart from that, the values of their respective attributes are also not displayed in the report.
I even verified the object in RSA1 where data is available for that.
Need Help to solve ....
Regards,
Chandru..

Can any one answer for Issue-2. Even I am also facing the same.
Thanks in Advance.

New created values are not displaying after upload

Hi
I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
Gaurav Upadhyaya
Edited by: Gaurav on Aug 26, 2008 10:55 AM

Hi,
You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
Pls. check this all and tell us, what the result is.
Regards

Tiff (or tif) file created in Photoshop is not displaying in Firefox 2 or 3 with Quicktime plugin

I embedded a tiff file that was created in Photoshop but it is not displaying in Quicktime/Firefox.
It works in other browsers but not Firefox 2 or 3. And another point is that if the Tiff file is created in any other graphics application then it works!
It leads me to think that Photoshop might be adding some metadata to the file that Quicktime/Firefox is not liking.
Any ideas on what might fix this?

There are different types of TIF files with different kinds of contents (compression schemes, channels, bit depths, etc). It is no surprise that you might get different results with different browsers/plugins.
What kind of TIFF are you using? Why are you not using a more standard web image format that does not require the overhead and hassle of an optional plugin?

Tiff (or tif) file created in Photoshop is not displaying in Firefox 2 or 3

I embedded a tiff file that was created in Photoshop but it is not displaying in Quicktime/Firefox.
It works in other browsers but not Firefox 2 or 3. And another point is that if the Tiff file is created in any other graphics application then it works!
It leads me to think that Photoshop might be adding some metadata to the file that Quicktime/Firefox is not liking.
Any ideas on what might fix this? By the way it happens in both Mac and Windows

There are different types of TIF files with different kinds of contents (compression schemes, channels, bit depths, etc). It is no surprise that you might get different results with different browsers/plugins.
What kind of TIFF are you using? Why are you not using a more standard web image format that does not require the overhead and hassle of an optional plugin?

"created by" not displaying in VL10A

Similar Messages

Maybe you are looking for