Creating a COM object with CF9 32-bit on Windows Server 2008 R2 64-bit machine

I'm using a 32-bit version of CF9 and it's installed on a Windows Server 2008 R2 machine (64-bit).  The problem I'm running into is that it won't allow me to create a COM object - it gives me the error, "no ntvinv in java.library.path null" when I try to run,
<cftry>
<cfobject type="COM" action="CONNECT" name="Engine" class="JRO.JetEngine">
<cfcatch type="Any">
    <cfobject type="COM" action="CREATE" name="Engine" class="JRO.JetEngine">
</cfcatch>
</cftry>
Then when I run it a 2nd time, I get "An exception occurred when instantiating a COM object. The cause of this exception was that: java.lang.RuntimeException: Can not use native code: Initialisation failed."
Can you help me?

Replying for your patchset installation pre-req error:
Use below command:
./runInstaller -ignoreSysPrereqs
Review MOS note 763143.1 for more info.

Similar Messages

  • Downgrade Windows server 2012 64 bit to windows server 2008 R2 32 bit

    HI,
    what I want to know is when Downgrading Windows server 2012 64 bit to windows server 2008 R2 32 bit, will there be any issues of the license? Can I use the same license of 2012 server for the new 2008 installation.

    Hi,
    Based on my experience, we cannot use the Windows Server 2012 license key to activate a Windows Server 2008 install.
    In addition, which channel the windows server 2012 was purchased through? It seems that the media and product keys to downgrade are not provided although downgrade rights are granted
    since Microsoft only supplies bits and product keys to Volume License customers and only for certain versions and editions of the software.
    I recommend you to contact the Licensing Activation Centers below for assistance:
    http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
    Best regards,
    Susie

  • Is it Possible to install ODDC 32 bit on Windows Server 2008 R2(64bit)?

    Hi All,
    Is it Support to Install ODDC 32 bit on Windows Server 2008 R2(64 bit).
    I am Posting this bcoz I did not found any ODDC related Blogs.
    Please help on this
    Thanks,
    Raj

    The certification matrix ( http://www.oracle.com/technetwork/middleware/webcenter/content/odc-cert-matrix-214688.pdf ) does not mention OS for ODDC Server, but as ODC is certified for Win Server 2008, R2, 32 or 64 bit, I believe the answer is yes.
    Make sure, however, that you ODDC clients run on a different OS (see Exceptions).

  • Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine

    I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
    Error (610)
    Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
    Recommended Action
    Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
    My Template does not have the Product Key defined.  The OS is Windows Server 2008 SP2 32-BIT.  Is defining Product Key absolutely necessary?  I have other Templates for other Operating Systems and they are working fine.  Only facing problem
    with this.
    Any help would be appreciated.

    In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
    The OS profile is required to have a product key.  A MAC activation key at the minimum.  But the key is required.
    If you deploy a VM from a VHD, the same customization assumptions are not at play.  Which is why it succeeds.  (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
    SCVMM has rules.  And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • Installing CF9 on Windows Server 2008 Standard 64-bit

    Hi-
    I'm attempting to  install a new ColdFusion configuration with a host who is useless  regarding the support that they offer (for now, they shall remain  nameless).
    It's a Windows Server 2008 Standard 64 bit VPS  configuration. MySQL is already installed so I'm on the hook to  configure ColdFusion 9 with IIS (7.5, I believe). There are numerous  settings which the installer does not seem to address so I've had to  address several Module Mappings which failed during the install....
    Can  anyone point me to an installation doc for the above configuration?  Will the CF installer eventually handle these issues or are we on our  own to support this?
    Thanks in advance,
    Rich

    My advice is to get out now and go to a site like hosting.com that has a solid track record hosting CF. There are several others to choose from. If they are starting this rough you will have constant problems.

  • BO XI 3.1 SP3 Install issue on Windows Server 2008 R2 64-bit

    We are trying to install the lastest Build of Business Objects XI 3.1 SP3 on a new server with Windows Server 2008 R2 64-bit OS (51038908_part1.exe,51038908_part2.rar, 51038908_part3.rar).
    The setup never finish! It seems that the setup can't validate the CMS installation and is trying again and again.
    In the "Enterprise XI 3.1 SP3 - Windows - Supported Platforms" document, the Windows Server 2008 R2 Entreprise 64-bit Edition is supported.
    The antivirus is desactivated and the setup.exe file was launched in the administrator mode.
    Any ideas?
    Edited by: Frederic Wojnarowski on Nov 22, 2010 5:45 PM

    We have run into similar issues with that same package (51038908_part1.exe) which is a complete install of "BOE-3.1 package with SP3" for Windows 2008 Server that only installs in the 64-bit mode.
    We had a 32-bit Oracle 10g client installed, that BOE did not recognize for the CMS - so the install was hanging at the CMS config...(no clear errors / no simple way to roll-back the failed install).
    We only discovered the underlying Oracle issue when we deployed just the CMS with a local MySQL database - and then tried to point the CMS at the Oracle DB instead. It gave us TNS errors even though we could hit the same TNS without issue using SQL-PLUS on the same machine.
    This lead us to assume that the 64-bit BOE couldn't connect via the 32-bit Oracle 10g drivers.
    We have had trouble installing the 64-bit Oracle 10g client that we downloaded - so are now looking for some advice.
    Anyone know which specific 64-bit Oracle 10g client should be used with the cumulative "BOE-3.1 package with SP3" 64-bit package (51038908_part1.exe)...?
    I assume that this Oracle client will be used for any connection to the CMS / AUDIT Oracle databases - and any RPT content running on the CR-JobServers that is using an Oracle Native connection...?
    Thanks in advance for the advice.

  • Installing forms 11gr2 services on windows server 2008 r2 64 bit

    hello,
    I successfully installed on windows 7 64 bit my developer forms & reports 11gR2 with weblogic 10.3.5 , jdk 1.6.0_+.
    Now i want to install in it in windows server 2008 R2 64bit, to deploy the application i created as a test.
    Question.
    1. Can I used the same installation set up , step, procedure as the development mode by only changing the installation mode to production mode in windows 2008R2?
    1.1 Do I need to create domain first after install the weblogic or it is like the development mode that the FRM_installation will create its classic domain?
    2. Can I used it without the fusion middleware?
    3. It is compatible version for forms 11gr2 for Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0) ? << doubted not compatible.
    4. It is valid if i only install weblogic server 10.3.5 without the fusion middleware? Am I or other clients can able to access it?
    5. It is will be a AS server even if without the repository creation?
    Note : i only need the forms&report server services to run our application on windows server 2008 R2 64 bit and compile respectedly.
    I ve done it with OAS 10g before but different procedures now since forms 11gr2 is using now weblogic server.
    Thank you very much.

    ... i want to install in it ... , to deploy the application i created as a test If you chose the "Development" install option during the installation of 11.1.2 you would have everything you needed to run your form. The only significant difference between the Dev and Deploy installation is the that in the Dev install type the Forms and Reports Servlets are deployed into the Admin server Managed server rather than creating a unique one for each. For local testing purposes, this should be sufficient for most cases. If on the other hand you need a full installation (Deployment), I would recommend that you choose this option, but be sure to also include the Builders. The Builders are available for both install types. I would not recommend attempting to have both install types installed together although it likely can be done. Having both installed would likely create confusion and difficulty during troubleshooting.
    Important point. If you choose the Deployment option and include the Builders during that installation, you do not need to start everything in order to run a form. All that is needed is WLS_FORMS. All other processes can be stopped if system resources is a concern. For an actual production deployment, it is recommended that you route end-user requests through HTTP Server, but this is not required unless you plan to use SSO or other feature that is managed through HTTP Server.

  • Oracle 11.2.0.3 on Windows Server 2008 R2 64-bit

    Good night Oracle community,
    I'm having problems on using Oracle 11.2.0.3 on Windows Server 2008 R2 64-bit that runs inside a virtual machine.
    The first problem was the error ORA-12152 (unable to send break message) when using a 32-bit server version when trying to connect via SQLPlus using domain administrator user. I did reboot, tnsping, checked parameters and oracle support articles but neither help me. So I uninstalled it and installed the 64-bit version and it wasn't possible to run the applications like netca.
    Now I installed it on a local profile version 32-bit to see if the problem was related to the domain.
    My question is simple: is this environment ok to run a production database server? 11.2.0.3 is that stable with Windows 2008?
    Thank you very much!

    Oracle Database 11.2.0.3.0 is certified on Microsoft Windows (32-bit) 2008.
    Error: ORA 12152
    Text: TNS:unable to send break message
    Cause: Unable to send break message. Connection probably disconnected.
    Action: Re-establish connection. If the error is persistent, turn
    n tracing and reexecute the operation.
    Refer to MOS
    ORA-12152 "Unable To Send Break Message" on Connection [ID 363638.1]

  • Cisco Security Manager Client running on Windows Server 2008 R2 (64 bit) in Terminal Service

    Hello CSM Gurus,
    Would there be any performance issues in CSM client software design if multiple instances of CSM client by multiple users ran concurrently on a Windows Server 2008 R2(64 bits) while CSM users accessing the server via Remote Desktop Services ?
    In my environment, we have a CSM server at our major data center while security administrators from all over the world need to use this CSM server. 
    In order to overcome the latency of the CSM client due to the WAN network, the plan is to use a Windows Server 2008 R2(64bits) as a terminal server and all security administrators would need to access this terminal server via RDP and would launch CSM client on their desktop.  The terminal server locates on the same LAN as the CSM server itself in order to minimize network latency in communications between the CSM clients running on the terminal server and the CSM server.  there would be multiple instances of CSM clients running concurrently on the Windows Server 2008 R2, the terminal server. 

    Hi;
    please check
    Oracle Database 11g Release 1 (11.1.0.7.0) <<Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64
    http://www.oracle.com/technology/software/products/database/oracle11g/111070_win64_2008soft.html
    Check Database 11g Release 2 Certification Highlights [ID 1065024.1]
    But please check this thread
    client 11gR2 install on Win 7 Pro fails java.lang.NullPointerException
    Regard
    Helios
    Edited by: Helios- Gunes EROL on May 14, 2010 4:49 PM

  • Installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit

    installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit
    i have installed this but restarting of server making problem
    i m not able to start opmn.ctl
    what should i do is there any other version to be downloaded
    I did.
    1. i installed X 86 software as 64 bits is available for itanium only
    2. it installed successfully after changing value in orapram.ini
    now after reboot of server my opmnctl doesnt come up
    what can be the issue?

    hi,
    1st..check whether all the services of oracle are started in services.msc(if possible pls specify what all services of oracle can you see in services.msc)
    2nd..when you use the command opmnctl startall..what errors do you get..
    3rd..can you specify the opmn.logs and ons logs
    Regards
    Fabian

  • Adobe Reader XI (11.0.08) doesn't create thumbnail (bitmap) using Microsoft Interface IExtractImage -- Extract on Windows Server 2008 R2, when exe to generate thumbnail is launched from Windows service.

    Adobe Reader XI (11.0.08) doesn't create thumbnail (bitmap) using Microsoft Interface IExtractImage --> Extract on Windows Server 2008 R2, when exe to generate thumbnail is launched from Windows service.
    But if exe is launched as standalone, then interface IExtractImage --> Extract, gives Bitmap to generate thumbnail of PDF document.
    Above problem occurs only for PDF documents, if we tried same with other software like CAD -CATIA it works without any problem.
    Is there any security concerns form PDF side, which doesn't allow to generate Bitmaps, if exe to generate it is launched form Windows service.

    It might be deliberate, Acrobat and Reader software is not intended to run in a service environment.

  • Windows Server 2008 Standard 64 bit edt support Hyper-v replication

    Dear Team.
    Windows Server 2008 Standard 64 bit edt support Hyper-v replication or not.
    If my primary physical server down so my secondary server act as primary server.

    Hi,
    Windows Server 2008 Hyper-V do not Support Hyper-V replica.
    This is a new Feature in Hyper-V for Windows Server 2012.
    http://technet.microsoft.com/en-us/library/hh831410.aspx#BKMK_Replica
    Regards
    Sebastian

  • CF9 installation on Windows Server 2008 R2 64 bit

    Our company is looking purchase CF9 standard edition and install it on a Windows Server 2008 Std. Edition R2 64bit.
    Does anyone forsee any problems as far as compatibility is concerned?

    Not in the slightest - I installed five just the other week
    All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
      Install extra roles:
        Application Server
        Web Server (IIS)
          Application Development
          IIS6 METABASE Compatibility
      Install extra Features:
        SMTP Service
    Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
    But the actual install itself was far simpler than CF8 on 2008.
    O.

  • Mouse not working in Virtual machine (win2k3 32 and 64 bit) on Windows Server 2008 RC1 With Hyper-V Technologies

    I have installed two virtual machines(win2k3 32bit and win2k3 64bit ) on Windows Server 2008 RC1 With Hyper-V Technologies (Beta) enterprise. Mouse is getting lost inside VM (using CTRL+ ATL +  LEFT ARROW  comes mouse control control in host OS).
    Is there any setting to make mouse works? Insert Integration Serice setup Disk operation succeeds.

     all credits for mike_something
    The problem is that the old mousedriver is hooked to the mouse device class.
    To remove this dependency, go into the registry and navigate to the key
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E96F-E325-11CE-BFC1-08002BE10318}
    Remove the value msvmmouf from the UpperFilters Regvalue.
    Reboot....
    tadaaa!!
    If you wish you can take out the drivers completely by deleting these registry hives completely :
    The driver:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\msvmmouf
    The Service:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\VPCMap
    The CopyHook Shell Extension: ( for folder access )
    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{30C14BA C-122C-42ED-B319-1139DBF48EB8}\InProcServer32
    HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandle rs\VPCCopyHook
    After a reboot you can delete the "Virtual Machine Additions" folder from program files...
    Good Luck!

  • CF10 on Windows server 2008 (64bit): 32-bit CF cannot be installed, but 64-bit can.

    Hi, I have exhaused my research and ways of fixing this issue.
    I have a Windows Server 2008 (64-bit).
    I am able to install 64-bit CF10 on it and CF websites run just fine.
    On the same machine, I have a ASP website that must be in run in 32-bit and within this website there are some ColdFusion pages. So I have to install CF10 32 bit. So I uninstalled CF10 64bit.
    When installing CF10 32 bit, I always got error message:
    Cannot configure IIS connector. Enable the required option ASP.NET, ISAPI Extensions and ISAPI Filter in IIS under Windows Features and try again.
    I did lot of online research and found RELATED posts, but none of them worked for me. Basically, in my case I have the IIS following installed
    ISAPI Extensions
    ISAPI Filter
    ASP.NET
    CGI
    but I alway got the above error message. Cannot think of other reasons.
    Any help is really appreciated!!! I have been working on this thing for the past three working days.
    Regards.

    Hi,
    I saw your post which is similar to the problem I'm trying to solve.  I'm not sure if I need to post a new topic, but I thought just add it to your post.
    I installed CF10-64bit on Windows 2008 server (64 bit).  When I opened the CF admin, it gave me an error - HTTP Error 500.0 - Internal Server Error. The page cannot be displayed because an internal server error has occurred.  Module: IsapiModule, Handler: cfmHandler, Error Code: 0x800700c1.  After searching for solution in the internet, I finally made it work after changing the DefaultAppPool which is used by the CFIDE in the advance settings, the "Enable 32-bit Applications" to False.
    Now, my problem is I have an ASP application which requires that the application pool advance settings must be set to True for "Enable 32-bit Applications".  I created another application pool for this application.  It woks fine.  However, this ASP application calls some CF pages and I'm having a problem because the CF10 is set to use a different application pool with diferent setting for "Enable 32-bit Applications".
    In order for my application to work, it seems that I need to install the CF10 32 bit version.  Am I right?  Or is there a work around for my issue?
    Thanks in advance for any help.
    I'm going to create a new post for this.
    Message was edited by: tibay

Maybe you are looking for

  • Item Status can be controlled for open Sales Order

    Hi All, Is there anyway we impose restriction on changing the status of the item if there are any open Sales Order against it? Example: If an item A is in Active Status and has a Sales Order with Awaiting Shipping Status. Before the order is booked i

  • How do I restore my utility app on iPhone?

    How can I restore the utility app on my iPhone 4, I deleted it by accident?

  • Not waking up monitor

    My MacBook Pro 2 Ghz Intel Core i7 with 8 GB DDR3 RAM won't wake up an external monitor. I will also get an occasion "snow shower" on teh monitor then it dies. i have to restart the machine or unplug the Thunderbolt connector to get it to work again.

  • How do I open a folder and update web page on different computer.

    Hi All, I started my iweb page on my powermac at work and have uploaded the pages online. I have saved the page to a folder and now want to work on the updates at home on my powerbook and can't seen to figure out how to open the folder. I've used Qui

  • Roman numerals

    can anyone help me out with a Java program that promts for a number and displays it in a roman numerals please help!!!


HashFlare