Creating a new webpage using PhP based on user info

Hey all! I'm going to try and explain this the best I can, I dont think it's too complicated but we'll see
On my website, what I want to have happen is when a user registers (First name, last name. username, password, email) and hits the "register!" buttton, a new webpage is created that has all of the users info displayed (well, almost everything )
example is someone browses to my website at www.slaughtergaming.com , goes to my register page, and creates an account with the name 'nyius'. a webpage is then created using the users username (so something like www.slaughtergaming.com/nyius) in which anyone can visit and see all of my info (username, first and lastname, email, etc)
I hope that pretty much sums it up.. if you need some code from my website ill be glad to poste it

Yes that could work i suppose ^^
how would I check to see which user is viewing the page, then load all of the relavent users info?
Right now when the user logs in, their username and password is saved in the session, so I assume i just need some script that checks who is logged in and then load their info respectively?

Similar Messages

How can I create a new label using Pages and Avery Labels products?

How can I create a new label using Avery LAbels and PAges on an imac?

Contacts prints to Avery labels.
Otherwise just open the appropriate Word template from Avery's website, in Pages.
Peter

Creating a new document using XQuery

Hello everyone,
I wondered if there was a way to create a new document using XQuery. What I am trying to do is to run a query on XML file and try to print the results in HTML for viewing purpose.
The HTML is spitted out on DOS prompt. Instead I wanted to write that HTML to a file on disk. Is this possible with the XQuery tools provided by Oracle?
Thanks in advance for all the help
K

Folks,
Kinda answering to my question. Just send the DOS output to some file. Pretty Simple huh!
Thankyou anyways
K

Creating a New Layer Using Icons in Adjustment Palette

When creating a new layer using the icons in the adjustments palette and holding ALT in CS5 a dialog box would appear before creating the new layer. At this point you could rename the layer change the blending mode etc.
In CS6 I do not get the dialog box to appear the new layer is just created. I've tried to reset my preference twice and this has not help. Any ideas?

JJMack wrote:
Your memory has failed
On the contrary, your memory may have failed.
ACJ81 is correct (at least as far as Ps on OS X is concerned) and the problem was mentioned in the forum not too long ago. In CS5, Alt-clicking an icon in Adjustments panel does cause a New Layer dialog to pop open and the dialog fails to appear in CS6.
In CS6 and CS5, the dialog will appear if you pick an Adj Lyr from the Layer > New Adjustment Layer submenu, both with or without Alt modifier. (That lack of control over the appearance of an optional dialog when picking from a menu is an inconsistency in the interface.)
In CS6 and CS5, the dialog will appear if you Alt-click the black and white circle at bottom of Layers panel then pick an Adj Lyr from the menu, as Noel said.

I wanted to send some photos out but was told I need to create a new profile, use mail icon in control panel no icon there how do I get it done?

I want to send some photos from Firefox, when I tried it said I need to create a new profile, use mail icon in control panel. I went to control panel and do not know what to do.'''bold text'''

As all of the msuic came from your computer in the first place it should still be there. Is it not?
EVERYTHING on your ipod should also be on your computer and should be included in your regular backup copy of your computer.
Make sure that everything is on your computer. You can transfer itunes purchases from the ipod. Without syncing: File>Transfer Purchases.
When everything is on your computer, then it can be synced back to the ipod after updating.

How to create a new material using a BAPI?

Dear friends,
How to create a new material using a BAPI? I mean without knowing the material no., how to just create a new one using function modules(BAPI)?
Thanks a lot!

Dear,
New material can be created by using a BAPI_MATERIAL_SAVEDATA.
More over their are lots of threads available on SDN on the question you raised so kindly search the SDN before posting any thread .
Cheers
fareed

How to create a new component using SPICE?

People, I don't know how to create a new component using SPICE.
I know that it's possible to create a new component and use a SPICE code, but I don't know how to do this very well, and I need the TI ISO124 (Isolation Amplifier), and I have no idea on how to do that. Can somebody help me? I need to develop a layout.
Thank you!!

Hi,
Here is a tutorial that explains in details how to create your own component in Multisim using a SPICE model.
Hope you find it helpful,
Mahmoud W
National Instruments

Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

Hi,
I am using SCOM 2012 SP1
I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the Scope and Counters section. When I try to search for a particular object such as a
port or interface it times out and returns an error. The error is shown below:
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
Support Services for more information.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
languageCode, InstanceQueryOptions instanceQueryOptions)
   at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
   at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
   at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
Has anyone else seen this issue? or can anyone explain what is happening?
Many thanks

Hi,
Asposted earlier,hadt he same problem
when creating a Dashboard widget type
State.
Ones olution I found for this was as follows:
When creating the State widget,the option
to specify the criterion I left blank
and finished the creation of the dashboard.
With that managed to solve the problem.Of course this
is not the solution, or the root cause
of the problem.
I will examine more about this issue, and sohave
the ultimate solution and why such behavior,I post
here.
thank you
Wilsterman Fernandes

Creating a new database using an MDF file

My database saves as MDF. I want to know what are the steps to restore or create a new database using a MDF file? I tried to restore as usual but it shows an error. Please help.

An MDF file isn’t a backup file isn’t the main data file (or master data file depending on who you ask) hence the file extension MDF. You can attach the MDF to the database by right clicking on the databases folder in Enterprise Manager (SQL 2000) or Management
Studio (SQL 2005) then selecting all tasks and then Attach Database. When you do this you will get an error about the log file missing. This shouldn’t matter as SQL Server will simply create a new log file for you. This will only work if the SQL Server was
stopped when you copied the MDF file from the old SQL Server. If you copied the file while the SQL Server was running this file probably will not attach either and you will need to get a valid backup of the database.
Download help tool for sql database - SQL Server Restore Toolbox.
http://www.sqlserver.restoretools.com/
You can read up more on SQL Server here.
http://www.filerepairforum.com/forum/microsoft/microsoft-aa/sql-server/498-creating-a-new-database-using-an- mdf-file?_=1416149856104

I need to know how I will create a dynamic website using php and mysql

I need to know how will I create a dynamic website using php and mysql that people could have the abilities of registering in the website, and modify their profile where they can add their pictures and everything. apart from that, they should have the ability to search about other member. hope to here more from you.

If you are a right-brained creative, and have no previous experience or propensity to be able to understand coding and database "stuff", and/or if your time can be better spent on other skills, I recommend you save your sanity and hire a developer... or at least the first time around. I have been attempting to grasp this for years... and have a library of marked up books to prove my efforts, all while trying to keep up with an ongoing client base that is always cramped. It's a wonder I still have my sanity... then again, I might not be the best person to determine that. Others might question it.
That said, I still plan to master php... one of these days.

When I create a new cube using another cube as template which datasource i

Hi,,
When I create a new cube using another cube as template(copy) which datasource is assigned to the new cube, why because am getting all the fields which are there in copied cube even though I used only required fields.why this is occuring?
Thanx in advance,
Ravi

Hi,
Usually, when you copy the cube only data model is copied. means all KF and CHAR, NAV CHAR.
May be after copying you can reassign (CHARS) once again in the New cube as per your requirement.
When you create the update rules, there you can assign the Infosource or original cube as datasource.
may help...
Vis

Two users share one Apple ID, on two phones. can they be separated without losing phone backups? IE creating a new ID for one of the users?

my in-laws share one apple id for two separate iPhones. They would like to create a new ID for one of the users but maintain his current backup. can this be done?

If you want to create a new account make sure you sign out of everything via the settings. (ICloud, iTunes, facetime, messages, etc) APPS: since the apps were downloaded with a different apple ID, you will always need to use the password for the apple ID that downloaded that particular APP when it needs to be updated. Unless it is free, you can simply delete it and download it under the new apple ID. As for the music, you can keep it on the IOS device, but if it's accidentally deleted, you'd have to sign back into the original account and download from the cloud. (But, you risk getting the 90 day lockout. )

HT1527 I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

i had the same problem before using a fresh install of Windows 8.1. I have resolved this issue by running the program compatibility wizard. This I did by right-clicking on the iTunes icon in the desktop, selecting Troubleshoot compatibility, waited for it to detect compatibility issues and when presented with the following options: 1.) Try recommended settings; 2.) Troubleshoot program, I chose the latter. When asked what problems I noticed, I checked the following: "The program worked in earlier versions of Windows but won't install or run" and "The program requires additional permission"
After that, it tired to resolve the issue, and provided the necessary settings to run iTunes. Now it's running flawlessly. I have Avast anti-virus installed though.
HTH!

I created a new apple id and as my billing info i put in my itunes card. i still have $18 left in the account but it wont let me buy anything because i put none as my payment method. what can i do to fix this?

i created a new apple id and as my billing info i put in my itunes card number. i still have $18 dollars left in the account but it wont let me buy anything else because it constantly asks for my billing info and i now put none as my payment method. how can i buy stuff again?

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application. ...
Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. ...

Unable to create records in database using PHP Data Service

Hello, I've been stuck on this for a few days and search up and down for this on the net, no response I've found has worked, so I come to you...
Here are the steps I've taken, I think it's pretty standard
1. I have a macbook pro running osx 10.7.3
2. I installed MAMP all default (I've acually reinstalled this because someone suggested this might fix it)
3. Thru phpMyAdmin I created a database called my_test
4. In that database I created a table, this is the export of that table: (I've also tried this with InnoDB which is the default)
CREATE TABLE `customer` (
`id` int(10) unsigned NOT NULL AUTO_INCREMENT,
`name` varchar(50) NOT NULL,
`email` varchar(150) NOT NULL,
PRIMARY KEY (`id`),
UNIQUE KEY `id` (`id`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=1 ;
5. I created a new Flx Project (Running Flash Builder 4.5.1 Premium)
     Project Name: PHPTest
     Application Type: Desktop (Although I've done the same thing with Web and got the same results)
     >> Next
     Application Server Type: PHP
     Web Root: /Applications/MAMP/htdocs/
     URL Root: http://localhost:8888/
     Clicked 'Validate Configuration' and that worked
     Output Folder: /Applications/MAMP/htdocs/PHPService (default by Flash Builder)
     >> Finished
6. On the Data/Services tab on the bottom I click 'Connect to Data/Service...'
     Select 'PHP'
     >> Next
     Select 'Click here to generate a sample'
     Select 'Generate from database' radio button
     Username: root
     Password: root (default for MAMP)
     Host name: localhost
     Server port: 8889 (default for MAMP MySQL port, the HTTP port default is 8888 which in both cases seem to work but every video I've seen that uses MAMP on youtube uses 8889)
     Database: my_test
     Click 'Test Connection' (works)
     Table: customer
     Primary Key: id (this field is greyed out and Flash Builder selects 'id' which it figures out from the SQL table)
     >> Click OK
7. Then if I don't have the Zend Framework folder in my /Applications/MAMP/htdocs/ folder it tells me its going to create that and I say alright. Then Flash Builder says stuff about how this is really only for testing and not production server ready and I say alright.
8. Then it takes me back to the Form from Step 6 when I get the chance to select 'Click here to generate a sample'
     These fields are now filled with this data automaticly:
     PHP Class: /Applications/MAMP/htdocs/PHPTest/services/CustomerService.php
     Service name: CustomerService
     Service package: services.customerservice
     Data type package: valueObjects
     >> Click Next (shows all the functions that will be now availible)
     >> Click Finished (End of the forms and it opens Dreamweaver to the php file it created CustomerService.php which I have no need to edit so I close that down)
9. Back in Flash Builder I switch to design view and drag a datagrid onto the big white area in the middle, whatever that is called.
10. Then below in Data/Services tab on the bottom I click drag the function 'GetAllCustomer' on top of the datagrid.
     I say yes to rebound and click ok and the view of the datagrid is updated with the colums from the 'customer' table in mySQL.
(Now let me say that when I hit save and compile this, if I actually had records in this table that I insert thru phpMyAdmin, this does show in the datagrid. So for the whole CRUD thing I am able to get the R which is Read)
11. Now going back to the design view in Flash Builder I will create a form to create records in the table... (I guess this isn't really a step)
12. In the Data/Service tab on the bottom I select 'createCustomer' function and then there is an icon called 'Generate Form' that looks like a white piece of paper with a gear on the bottom of it.
13. This opens up a new form and since I don't have a crazy bunch of fields in my table I just click Finished (If you click next you can specify which fields you want to exclude from the form but this time I don't need to)
14. This actually creates 2 forms if you look at the code, the second just shows the return type from when you click 'CreateCustomer' button on the first form. Because they overlap in design view I drag the form out of the way so you can see the input form, the return form, and the datagrid
15. Then I save and compile...
(Also if your actually reading this I didn't remove the id form field, I get the same result either way, but if you do remove the form field in the code/design you also have to update the button function to not deal with the id before it gets sent off to the php page since in this case the MySQL table is set to auto_increment the id, sorry this doesn't make much sence but this little area doesn't matter much either way)
16. Now fill in whatever data you want for name and email, try differnt numbers in the id field like 0, nothing, 1, 1000 and click 'CreateCustomer'
(For me nothing happens, no return is put in the return field, no error pops up and the datagrid is not updated with the new record, also going over to phpMyAdmin and checking out the table browse doesn't show any changes either, I know the button is calling the function because if I add a state change in that function it changes, it would seem that the line:
createCustomerResult.token = customerService.createCustomer(customer2); doesn't do anything)
So any idea what is wrong here, I'm convenced it's something stupid easy simple I just can't see it.

In case you need more info, here is a code dump on a mxml project that has this problem:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:mx="library://ns.adobe.com/flex/mx"
                       xmlns:customerservice="services.customerservice.*"
                       xmlns:valueObjects="valueObjects.*"
                       currentState="State1">
    <fx:Script>
        <![CDATA[
            import mx.controls.Alert;
            import mx.events.FlexEvent;
            protected function dataGrid_creationCompleteHandler(event:FlexEvent):void
                getAllCustomerResult.token = customerService.getAllCustomer();
            protected function button_clickHandler(event:MouseEvent):void
                var customer2:Customer = new Customer();
                customer2.id = parseInt(idTextInput.text);
                customer2.name = nameTextInput.text;
                customer2.email = emailTextInput.text;
                currentState = "Test";
                createCustomerResult.token = customerService.createCustomer(customer2);
        ]]>
    </fx:Script>
    <s:states>
        <s:State name="State1"/>
        <s:State name="Test"/>
    </s:states>
    <fx:Declarations>
        <s:CallResponder id="getAllCustomerResult"/>
        <customerservice:CustomerService id="customerService"
                                         fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)"
                                         showBusyCursor="true"/>
        <valueObjects:Customer id="customer"/>
        <s:CallResponder id="createCustomerResult"/>
        
    </fx:Declarations>
    <s:DataGrid id="dataGrid" includeIn="State1" x="330" y="10" width="392"
                creationComplete="dataGrid_creationCompleteHandler(event)" requestedRowCount="4">
        <s:columns>
            <s:ArrayList>
                <s:GridColumn dataField="id" headerText="id"></s:GridColumn>
                <s:GridColumn dataField="name" headerText="name"></s:GridColumn>
                <s:GridColumn dataField="email" headerText="email"></s:GridColumn>
            </s:ArrayList>
        </s:columns>
        <s:typicalItem>
            <fx:Object id="id1" email="email1" name="name1"></fx:Object>
        </s:typicalItem>
        <s:AsyncListView list="{getAllCustomerResult.lastResult}"/>
    </s:DataGrid>
    <s:Form includeIn="State1" defaultButton="{button}">
        <s:FormItem label="Id">
            <s:TextInput id="idTextInput" text="{customer.id}"/>
        </s:FormItem>
        <s:FormItem label="Name">
            <s:TextInput id="nameTextInput" text="{customer.name}"/>
        </s:FormItem>
        <s:FormItem label="Email">
            <s:TextInput id="emailTextInput" text="{customer.email}"/>
        </s:FormItem>
        <s:Button id="button" label="CreateCustomer" click="button_clickHandler(event)"/>
    </s:Form>
    <s:Form includeIn="State1" x="0" y="204">
        <s:FormItem label="CreateCustomer">
            <s:TextInput id="createCustomerTextInput" text="{createCustomerResult.lastResult as int}"/>
        </s:FormItem>
    </s:Form>
</s:WindowedApplication>

Creating a new webpage using PhP based on user info

Similar Messages

Maybe you are looking for