Creating an Aperture web page from photos the page goes white and nothing displays. Is this a RAM issue?

I have just purchased an iMac 27" 2.7GHZ running OSX 10.7.4 with 4GB RAM (16 GB has been ordered). I am using Aperture 3.3.2. When I attempt to create a web page from photos the page goes white and nothing displays. Is this a RAM issue?

I have resolved the issue....turns out that, in my case, running OSX 10.8.1 with Aperture 3.3.2 was what was required! I was running Aperture 3.3.2 with OSX 10.7.x and had this issue.
I hope this helps someone else as well.

Similar Messages

  • I try to get log on to the itunes store, says accessing store that the screen goes white and only the apple symbols is in the top box...nothing else...WHY

    okay  i have been trying to access the itunes store from my computer and after i click the tab the words accessing itunes store scroll across screen the the screens goes white and only the apple symbols is in the box.....WHY.  Is the store down??

    Hello there jodi o,
    It sounds like you are unable to access the iTunes Store on your computer. I would recommend you use the following article to help troubleshoot that:
    Can't connect to the iTunes Store
    If the issue persists after using the info for your operating system in the above article, here is the more advanced version with further troubleshooting info:
    iTunes: Advanced iTunes Store troubleshooting
    If you are using Windows, you should also try the information in this article:
    Apple software on Windows: May see performance issues and blank iTunes Store
    Thank you for using Apple Support Communities.
    All the best,

  • Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?

    Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
    Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
    Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
    If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • When I turn on my ipod touch the screen goes white and stays white.

    When I turn on my ipod touch the screen goes white and stays white.  It plays but all I see on the screen is white.  I cannot change anything.

    It iTunes is asking to enter the passcode then:
    - A data recovery company may be able to help
    - Restore the iPhone from the backup of the iPod. You can then get the data off and then retore the iPhone from the backup of the iPhone.

  • Firefox freezes, if clicked the screen goes white and says firefox is not responding. How do I fix this?

    At seemingly random times, firefox freezes, and if clicked the screen goes white and says not responding. At times it makes watching any video impossible. I have tried everything I've seen in help forums. I've removed and reinstalled firefox, adobe, silverlight, realplayer, and anything else forums have suggested. So far the only effective solution I've read about this problem is to switch to google chrome. I'd rather not do this.

    Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
    Starting The Computer In Safe Mode;
    If running, turn your computer off.
    Remove any disks and thumb drives that are in your hard drives or ports.
    Now start your computer but also;
    '''Windows; '''Press the <F8> key repeatedly.
    '''Mac: '''Hold down the Shift key.
    '''Linux; '''Using the command line, Linux/Unix computers can be booted
    into various run levels that determine which resources are loaded.
    For example, "runlevel 1" is typically the equivalent to Windows and
    Mac safe modes.
    * Source; '''[ Safe Mode; Free Online Encyclopedia]'''
    When the '''Boot''' menu is displayed, release the key you were pressing.
    You must now choose what mode you want. The most used are;
    * Safe Mode; The computer runs with only a minimum set of programs.
    * Safe Mode '''With '''Networking; Same as above, but with internet access.

  • I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

    I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

    Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
    The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
    Briefly, you need to delete the following file:
    If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
    Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
    When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
    mount -uw /
    You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
    Next, type the following command:
    rm -i /var/audit/current
    Press return. You should get the following output:
    remove /var/audit/current?
    If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
    Finally, enter the command:
    Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
    Credit for this solution to ASC user AnthonyTW.

  • I receive a Software Update notice that fails. How do I find out who/what is trying to update? How do I stop its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

    About once a month I receive the Software update notice that has failed. How do I find out who/what is trying to update? If I decided I want this update how do I allow it to continue? If I decided I do not want this update how do I stop it and its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

    Hi sharkbiscuit79,
    Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013.  PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
    However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
    Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) -
    Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
    jac_95 | Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • When I open my internet and go to say Macys and try to bring up all pages for handbags, the screen goes black and it returns to the screen that has all my icons on it.  Why and how do I fix?

    When I open my internet and got to say the Macy's website and try to bring up all pages in the handbags dept, the screen goes black and it returns to the screen that has all my icons on it. Why?

    Safari is crashing.
    Try a reset:
    Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

  • When I go to view a video I downloaded from iTunes the screen goes black and won't play. Tried turning it off multiple times. Still downs not work

    Worst part is I am on a plane and now have time to kill as I can't watch my movie right now

    Quit the video app and try again.
    Go to the home screen first by tapping the home button. Quit the app by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the video app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the app. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Launch the video app again and see what happens.
    If that doesn't work - go to the home screen again and swipe to the right to bring up the search feature. Type the name of the movie in the search field at the top. If the movie shows up in the search - tap on the icon and hopefully it will start playing. Let it play for a couple of minutes and tap done. go back to the video app and see if the movie appears there. If so you should be able to play it from there.
    If that doesn't work, try resetting the iPad and launch the video app again.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • My iPod wont turn on anymore. I have had my iPod since the end of January of 2012, Last night it shut off on me. It keeps trying to reboot itself, but all it does it show the apple symbol, then the screen goes white and reboots again. I need help. :(

    Hi, My name is Cassie.
    I bought my iPod off of amazon just around the end of January of this year (2012). Last night I was playing around on my iPod. Listening to pandora, and editing pictures. I got to a picture and clicked edit, and then my iPod shut off. It rebooted itself and seemed to be running as if nothing had happened. I put my music back on and went back to the picture and tried to edit it again. I clicked the edit button and the ipod shut off again. This time, it kept rebooting. It went to the apple symbol to turn on and about thirty seconds, the time it normally takes to turn on, the whole screen went white and then shut off and tried rebooting again. It kept doing this over and over again. After a while, it did eventually stop, but only to a completely white screen. It was like that all night long because I fell asleep. (gave up on it). It is now the afternoon and after I held the lock button and the home button down the screen when off. I let it sit for about a half an hour, then I tried turning it on again. But it still is doing the same thing. I have no idea what I could have done to make it do this. Unfortunalty, I am not home to connect it to my own iTunes, but regaurdless, it wont even connect to the computer. I did have my ipod plugged in the whole time it was rebooting and shutting off last night. It was connected to my wall jack which normally works fine. But even having it plugged into the computer as it is now, its still doing the same thing. I am dissapointed that I might end up loosing everything that I have on it. I have not been able to sync it to my computer to save all the apps and pictures and music I have stored on it. I really do hope I can get some help or advice!
    Thank You!!
    -Cassie Lawrence

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • I'm trying to install a new samsung 27" series 7 750 monitor. I have a macmini. when i plug the cord in between the computer and the mknitor, the screen goes white, but no display. When not plugged into the computer the screen stays black and cycles

    I'm trying to install a samsung series 7 750 monitor for use with my mini mac. When I plug the computer to the monitor I get a blank screen, no picture. When not plugged in to the computer the screen is black and a square displAys that says analog, HDMI 1, HDMI 2. Any ideas?

    Hey there saraszeg,
    It sounds like you are trying to use an external monitor with your Mac Mini but cannot get more than a gray screen. You can use the following steps to help troubleshoot the Mac side of things here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Take care,

  • Hi all, I am not able to open the game centre on my ipad! When I click on the icon the screen goes white and all I can see on the screen is the battery icon on top right and internet connection top left. Nothing else happens. Please can anyone

    Please can anyone help me to open game centre. Thanks in advance.

    Try closing Game Centre via the iPad's multitasking bar and see if it works when you re-open it :
    iOS 7 : double-click the home button to open the taskbar, and then swipe or drag the Game Centre's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    iOS 6 and below : from the home screen (i.e. not with Game Centre 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Game Centre app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Since installing 3.6.12, firefox crashes continuously...I have gone back to Windows Explorer because firefox does not run anymore. Upon any actioin in firefox, the screen goes white and freezes and I get an error message saying firefox has stopped working

    just about any action in firefox will cause a "WHITE SCREEN" freeze up and then an error message stating that firefox has stopped working. This happens in EVERY sessioin of firefox.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • I turned on my Mac and the screen stays white and nothing ever shows up., I turned on my Mac and the screen stays white and nothing ever shows up.

    I have a 3 year old imac and turned it on the other day and the screen stayed gray and never moved away from it.  Any suggestions on things to try?

    Click on > Mac OS X: Gray screen appears during startup and follow the troubleshooting steps.

  • On my itouch4s, whenever I try to crop photos or play a game while musi is playing in the. Ackground, the screen goes white, and then turns off and back on again? Can the apple store fix this?

    I got this just last month for my birthday and it has been doing it since I got it

    Try a reset or restore

Maybe you are looking for

  • AIO REMOTE app on IOS

    I use the AiO Remote app on IOS to scan legal size documents.  I think my problem is with the latest update of this app as I never had this issue in the past.  I scan the multi-page LEGAL size doc with no issues.  I see the doc pages in legal size fo

  • Creating Documents to Support Multiple Digital Signatures

    I am currently working on creating a paperless business process utilizing Adobe Acrobat's Digital Signature Feature. However, I'm having a lot of problems utilizing it. Can somebody please explain the entire process from document creation in Word to

  • Signature text printing 2 pages

    Hai, In smartform i have 2 pages and have signatute text in both the pages.Now if smartform while printing if it has only 1 page then signature should print in 1st page if smartforms prints 2 pages then signature should display only in 2nd page.First

  • Server 2012 with HQ and 2 branch locations - Best practice?

    Hello.  I'm trying to plan a domain for a company with 1 Headquarters and 2 branch offices.<o:p></o:p> Currently both branch offices are communicating with headquarters via site-to-site VPN.  However, most if not all of our services are cloud based.

  • Displaying all rows if value is blank

    Hi all trying I am trying to display all the rows from a database if the default value is blank I have tried to put a * or ? in the php code What could be wrong here? What do I need to put for the variable section for the correct syntax As it its Nam