Creating an image with a Cloud Effect

Can someone please tell me how I can create an image with a
cloud effect like the photo located at the link below:
http://www.arizonamedicalclinic.com/
Thanks in advance for all of your help.

Nessa wrote:
> Can someone please tell me how I can create an image
with a cloud effect like the photo located at the link below:
>
>
http://www.arizonamedicalclinic.com/
>
> Thanks in advance for all of your help.
Draw a cloud shape. Fill it with white and add a black inner
glow.
Position the cloud shape over the photo. Press Shift and
select both the
cloud shape and the image. Choose Modify > Mask > Group
as Mask.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

Similar Messages

Can't create disk image with Disk Utility

I just upgraded to OS X Mountain Lion and i can no longer create disk images with Disk Utility in order to store encrypted data.
The operation fails and ends with the post :
Failed to create disk image, error:
hdiutil: create failed - Resource busy
I use three Macs with Mountain Lion, and this problem occurs only on one of the three.
I check the disk, repair permissions and did a reset of the PRAM. I even did a reinstall of Mountain Lion, without success.
But curiously, using a new user account, I was able to create a first disk image. But no one after.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Create an image with ActionScript

How do you create an image with ActionScript? The image is
located at an url that is not guaranteed to be on the same server.
I would prefer something that is compatible with previous
versions of the Flash player.
If you could point me to some tutorial or show me how it is
done.
Thanks

This is suuuuuuuuuuuuper basic, you just have a movieclip on
the stage and the URL of any image on the internet/local computer
function loadImage(imageUrl:String,
holder_mc:MovieClip):Void{
holder_mc.loadMovie(imageUrl);
Fill the two parameters with the 1. image url and 2.
movieclip that holds the image
It will load the image into it. Much more in depth tutorials
and stuff can be found all over the place, just google it.
Sam

How do I create a cross dissolve when working with an Image with the Multiply effect applied?

FINAL CUT PRO X
I've added the Multiply effect to an image as it is black and white and I need it to blend in with the background - when I try to add a cross dissolve onto the image to fade it into the background the image will not dissolve with the applied effect, instead, during the dissolve the image is black and white, once the dissolve is complete it then applies the Multiply effect...
How do I make this so the multiply effect is applied during the dissolve?

Try making the clip with the Multiply Effect into a Compound Clip and then adding the Dissolve.
Andy

Creating javaFX Image with InputStream

Hi,
I have dataset(Medical Image data), i want to build a javaFX Image,
Can some one help me how can i construct the image from this.
is there any way creating a image other than using url?
Thanks....

Try this:
var stream = A.class.getResourceAsStream( "lion1.png");
Stage {
    title: "Image from stream"
    width: 250
    height: 280
    scene: Scene {
        content: [
            ImageView {
                image: Image {
                    impl_source: stream
}

Image - with a WriteOn effect

I'm trying to make a image draw on my canvas. I've got an image with tribal band styled lines that are really intricate and I'm trying to make them write on over the duration of my motion clip. I'd rather not copy the entire image with lines and use the write on behavior to make it work because it will take hours. Is there an easier way to do this. My source image is photoshop and the lines are one of the brushes I've got in photoshop.
Any Ideas?

I mean... you could, depending on the shape, animate some crazy shapes that you're using as a mask. But yeah... if it's intricate, the best way will be to make lines out of it...
Maybe you could use the replicator with the sequence replicator in some fun way to do this, but you'd still have to trace the lines for that by hand.
There isn't a quick and easy filter to drop on to make it do what you want.

Render high quality 15 minute clip of still images with transitions - After Effects CC 2014

Hello, I am rendering a 15 minute composition comprised of a 3 high quality still images (5 mins for each image) with basic blur fades between each still at a res of 1440x900.
Rendering this out as a Quicktime movie is taking forever and results in a HUGE file size, can someone please recommend an alternative that will not sacrifice video quality?
Thanks!

He can't give you any specific advice because you didn't give us any specific information. How you are delivering your video makes a HUGE difference in what render settings you would use. If you're planning to send it for use in an NLE like Premiere, the advice would be different from if you were wanting to upload it to YouTube. Thus, he linked you to a resource that could best help you based on the limited information you provided.
Also, Todd comes on here in his free time. This is a user-to-user forum, not an official way to contact Adobe. We are grateful for any support we get here from official personnel.

Images with transperencies or effects created in InDesign are printing with bounding box

Hey everyone! My first post here, but I have been having fits over an
issue that keeps popping up.
If I give an image a drop shadow or create and overlay, I sometimes get the bounding box showing through on the pdf or the printed copy. What is causing this? I have read about the white box effect and the yucky discolored box effect, but this is a tad bit different. Hope someone can help. Thanks!

Thanks Peter! After your first reply I went down to the print shop and printed our problem document
using the YDB fix. It worked! I will keep the stitching info in mind
as well. Thanks for your help!

How do I create an image with a transparent shape?

Hi
This should be easy -
The end result I want is this:
a png which is mostly black (or any colour) but with a defined shape in it which is transparent.
I have the shape. I select it. I seem to be able to make a mask from this (a selection which I can copy and move about). But what I can't figure out how
is how to create a new image which is filled except for this masked area.
Any help gratefully received.
Thanks
--Justin Wyllie

Open a blank, new file with foreground color green
Type text
Open effects palette, and in the drop-down go to bevels, then select "Simple Emboss" - it is the second one in my program. Apply
Still in he effects palette, in the drop-down, go to visibility, select "Hide". Apply
Double click the f icon on the text layer in the layers palette to bring up the Style settings dialog, and add a small stroke to better define the letters.

How to create an image with a transparent shape

Hi
This should be easy -
The end result I want is this:
a png which is mostly black (or any colour) but with a defined shape in it which is transparent.
I have the shape. I select it. I seem to be able to make a mask from this (a selection which I can copy and move about). But what I can't figure out how
is how to create a new image which is filled except for this masked area which is transparent
Any help gratefully received.
Thanks
--Justin Wyllie

Open a blank, new file with foreground color green
Type text
Open effects palette, and in the drop-down go to bevels, then select "Simple Emboss" - it is the second one in my program. Apply
Still in he effects palette, in the drop-down, go to visibility, select "Hide". Apply
Double click the f icon on the text layer in the layers palette to bring up the Style settings dialog, and add a small stroke to better define the letters.

What is the most efficient way to create an image with no background?

When I create, or use, a logo, or type, or any graphic image,in a design, I want to import it to InDesign with no background - "transparent", if you will.
The steps involving importing from PShop seem convoluted, at best, with bitmap, greyscale and eps files... I know I am on the wrong track with this process, since it never seems to work.
Also, wish to import from Illustrator and sometimes Painter12.
Is there a quick'n'dirty way, or a best way, to do this?
Thanks, forum people!

First, it's OK to combine responses into a single post. Everything goes to the forum, not the individual, so we all see it all,so to speak.
Double clicking the background or duplicating it are just different paths to the same end, and you pick one based on what you are doing, as much as anything. "Background" in Photoshop is locked for transparency, so if you need a tranparent background you MUST do something. If I know I'm not going to need to do other stuff, I probably would double-click and convert the layer just for convenience and to reduce the file size, but if it's a client file or I know I may need to add adjustments and so forth, I usually will duplicate the background (even if I don't need transparency) and turn off the original. This gives me an untouched backup position and a source for making more copies, if necessary. I don't like doing any sort of destructive edit without using a copy of the original data.

Can't create cd image with any CD

Hi,
I'm having trouble creating a CD Image in Disk Utility. I insert the CD and then open Disk Utility. I then highlight the CD drive and click on New in the menu. The problem is that the "Disc Image from Device" option is greyed out. Does someone know why this option can't be selected?
This happens with any cd
Thanks,
Roby

If you are going to burn copies of the CDs, use the "Importing" pane of iTunes' "Advanced" preference to import using AIFF or Apple Lossless Encoder, so you don't reduce the audio quality. Also check the box to use error correction.

Trying to create an O with a twirl effect

Hello,
I am pretty new to photoshop. I am trying to create an "O" like the one in the attachment and i can't for the life of me figure out how to create that. I tried everything, the twirl filter and everything but i can't even come close to getting that. Does anyone know or can show me please how to make that?

It's not as straight forward as you might think. Crevitz is right about the Distort > Twirl filter, but you need to start with something like this
The apply Filter > Distort > Twirl two or three times, and finally grab the center portion with the Elliptical Marquee tool
Resize to fit with Free Transform.

Make mirror images with Creative Cloud products

Hi
I try to make 2 images into one.
I wanna make a mirror image of one, rotate it, and make it translucent.
Then I want to overlap it to the other image.
Is it possible to do so if I use creative cloud? How?
If possible, I will buy this product.
Thank you,

Photoshop
Mylenium

OSD - Creating 1 Image with choice of Software & Driver Packages

I am kindda new to SCCM 2012. I was wondering if it is possible to have like 1 Windows 8.1 Image and when it is being deployed we get a prompt for choice of Driver and Application Packages. The reason is that we have different kind of laptops and different
requirements for software. It would be good to have a prompt where you can choose which Driver Package to deploy based on the hardware and choice of software package that depends of the user's department.

Retrograde_PAK, a good majority of our software deployments occur based on our computer naming convention so having a decent naming convention would
be very helpful. I also create collections for all(most) of my software packages and am able to pull device records into their deployment collections based on membership queries again typically I leverage our naming convention but you could use any number
of things... AD location... Installed OS... basically anything that sccm has stored in its db for those records. then those collection are populated automatically based on those queries and the package is installed.

Creating an image with a Cloud Effect

Similar Messages

Maybe you are looking for