Creating bad DVDs

My daughter got new MacBook for graduation and loves it very much. Everything works fine except that if copying or creating video DVDs they come out bad. Sound is there but picture is vertical colored lines or some kind of heavy pixelation that is unrecognizable.
I am suspecting that first time when she went to play DVD that she didn't select right region or something like that. Somewhere in settings I saw that NTSC is selected. I don't know how to change or fix this problem. Please help, thank you in advance
Zack

Copying commercial DVD releases does not work with any software from Apple. It is technically illegal to do this, and although it can be done, nobody here would be allowed to discuss or promote the ways to get around any copyright issues. You will need to check with online forums that do. Google.
If you are having problems with iDVD not making playable discs of content you've created, then let's focus on the exact methods and settings you are using.
Future posts about iDVD should be made in the forum for that purpose:
http://discussions.apple.com/category.jspa?categoryID=128

Similar Messages

DVD burner creates bad disks

Purchased the notebook in December 2010, during the past few months I noticed many bad DVD's created while converting VHS tapes to DVD. I ran HP Optical Disk Drive Check and it issued a "Write Check" click "Get Assistance" to resolve the issues, but the PC kept running something and there was a lot of activity on the DVD drive. I let it run through the night and it was still doing the same next morning. I suspect the drive has issues but if anyone has ideas on further testing, perhaps I can try it before bringing the notebook to HP. I can't give up the machine for very long. If the drive is bad I can call HP for a unit and I can swap it out.

Hi,
Your machine is still under warranty, go for it. You can contact HP from one of the following locations, depending on where you are:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
Good luck,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to Create a DVD With No Menu?

hi there.
i've had DVD Studio Pro for a while and never used it.
would it be to hard to give me a step-by-step guidance on how to create a DVD from a QuickTime file in DVD Studio Pro (initially, in the form of a VIDEO_TS folder or IMG file) with no menus at all, so that it's played straight away once inserted into a stand-alone DVD player?
anyone, please?

If you are starting in SD and can use compressor, that works better: there are more knobs to twist to adjust the results to your liking. Going from HD to SD, I think compressor or a third party encoder is a must. Just too many things to tweek to get it right for the video you shot.
AC3 has another advantage in addition to file size: bit rate. There is a limit on what DVD players will handle - usually less than 10mb/s. And if you can have video + audio well under that, you disc will be compatible with more players. If can always put both on the DVD, and use a menu to let a user pick one, but you don't want menus yet, as you said. Many music DVDs do just that: PCM for best fidelity (it is noticeable on a really high end system that most mortals don't have), or DD, even 5.1 for everyone else.
Encoding: I use 7.5mb/s max for video, and adjust the "average" depending on how big my video is; I've used as low as 4.2 for stage plays and it was not too bad. If you have a short video, you might use CBR (contstant bit rate) at 7.5 for the best quality. I likewise adjust my AC3 bit rate; 192 stereo where I must save space and the original sound quality was not great anyway, up to whatever the max is (384, I think).
Eddie O

Novice. Creating a DVD from camcorder - help please..

Hi all,
I am tasked with creating a DVD from some of my dads camcorder tapes. Can anyone provide a simple advice list. I assume that iDVD (which i have never used) will be the software to use?
Look forward to hearing from you helpful and intelligent people out there.
From a complete simpleton.
Kind regards,
Alan

Hello, Alan,
First, you need to determine if these tapes are digital or not. If they are not digital, you will need to convert them into a digital media format that your version of iMovie can accept. (For example, iMovie 6 can accept only DV footage).
Does your dad have the camcorder that he used to record the tapes? If his tapes are not digital, you can connect his camcorder to a digital camcorder and record each tape to digital miniDV tape. I think it is easier to use iMovie 6 for your movie-making, especially if you are thinking about editing this footage, cropping out bad parts, adding titles, effects and/or audio clips. That is why I am recommending recording to miniDV tapes.
Having the original footage on miniDV digital tapes is also a good way to store the originals, takes up very little space.
If his tapes are some other format, post back for info regarding how to proceed,
What version of iMovie do you have? I am assuming that you have iMovie08 since you are posting in iDVD08. As stated, I recommend that you do this project in iMovie 6. If you don't have it on your computer, you can download it here:
http://www.apple.com/support/downloads/imovieHD6.html
And, I recommend viewing this tutorial: http://www.apple.com/support/imovie/tutorial/
Once you have the footage on the miniDV tapes, you can connect your digital camcorder to your computer's Firewire port, open a new iMovie project and import the footage. You should limit each iMovie to about an hour and a half, if possible. A single-layer DVD can hold about 2 hours of content maximum. It doesn't matter what the size of the iMovie is in GB, only its length matters for iDVD.
After you import the footage you want, you can edit the clips and place them on iMovie's timeline in the order you wish. You can choose to add titles, transitions, effects and audio. iMovie has one video and two audio tracks so you can easily see what you are doing. If you want to have different chapters(scenes), you mark them in iMovie. Another advantage of iMovie 6 over iMovie 8 is that you can put chapter markers where you want them, not just at specified intervals.
After your movie is finished, close iMovie.
Open iDVD, create a new project in which to place your movie.
You should do this tutorial before you begin to work in iDVD:
http://www.apple.com/ilife/tutorials/#idvd-create-63
Once you get your first iDVD project ready to burn, do a 'save as disk image' and then burn the actual DVD from the disk image using Disk Utility. You will need to use a good brand of DVD-R disks, such as Verbatim or Maxell. Memorex has been problematic for many, and don't use a cheap store brand. Select a slow burn speed, 4x or less.
That's a brief summary.....
Post back if you need further information! Good luck with your task!

Using IDVD to create a DVD with HDV footage edit in Final Cut

I tried to create a DVD with IDVD 5. It was a 5 minute hdv movie edited in Final Cut and the result was really bad.
I have tried the best quality option but it's still a disaster. I taught about using compressor but It would take 110 hours to compress this movie in h:264
What is my solution?

I have tried the best quality option but it's still a disaster.
Try best performance.

AVCHD file to create a DVD

Hi,
I need to create a DVD with menus from several AVCHD files.
After a bit of fluffing around I ended up importing the files direct from my camcorder into iMovie.
I then did my editing (pretty much just trimming both ends of the various clips). Have then gone to Share-MediaBrowser-Create 720p movie. Am very happy with the way these clips look after this process and its my intention to transfer them into iDVD as individual chapters once they are all created HD clips. I may need a couple of discs but that's no problem and plan to burn the discs at the professional setting.
Am I on the right track here or am I missing some vital step(s) ??
Cheers.

Hi
Feeding iDVD HD-material will not improve - but set off various problems.
DVD is as standard (what ever DVD Author Program used) - interlaced SD-Video in PAL or NTSC - nothing else.
So to get maximum quality
• use a video editing program that can deliver - iMovie'08 or 09 or 11 - can not do that to 100% but discard every second line in the picture.
• iMovie HD6 and FinalCut can deliver 100%
If iMovie'08 to 11 is a MUST then do
• "Share to Media Browser" - AND AS LARGE - Not HD or other resolution as this too degrades the final quality
Then in iDVD - Import from Media button (down to the right) / Movies
on Quality I made these notes.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I concider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything bittons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

When creating a DVD face in Photoshop 13 my save options are limited to .PSE and .PDF. Why can I not save as a jpeg or other file format? This was never an issues in Elements 10 (my previous version).

I just recently purchased Elements 13. I am in the process of creating a DVD face for a video. The design is complete and I would like to be able to save it as a JPEG so I can use it in another program that prints my DVD's. The problem is that it only allows me to save the file as at PSE or a PDF. No other options are available. Why is this? I upgraded from Elements 10. In Elements 10 I have never had a problem saving this type of project as a JPEG. Any help would be greatly appreciated. Thanks!

ANSWER FOUND!
Once I finished composing my question I went back and spent some time to figure out the problem. Rather than choosing the "save as" option, which doesn't work, or attempting to choose "export" (grayed out), the correct option is to choose "export creation", which is near the very bottom of the initial drop down options. That works! I still think it would make sense to have it as an option in the "save as" area.

How do I create a dvd backup of library in the very latest iTunes,with windows xp?

How do I create a dvd backup of library with itunes version 11.1.4.62? Using windows xp.

Hi meatmailbox,
Welcome to the Support Communities!
The best way to backup your iTunes library is to an external hard drive. The article below will explain how to do this. If you want the files on a CD or DVD, you would need to create playlists. I'll include that information as well.
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
iTunes 11 for Windows: Create your own CDs and DVDs
http://support.apple.com/kb/PH12348
Cheers,
- Judy

How do I create a DVD from iMovie when iDVD is no longer included in iLife (Lion).

I've been doing video editing for many years on PC using the Pinacle software. I have for years wanted to switch to a Mac that is known to be far better for this purpose than PC. A few days ago I bought an IMAC 27 inch, 3.1 MHz and was impressed with the Imovie program until I was going to burn the project onto a DVD as I had read about and explained in all Apple stores I've visited.
I realize to my great surprise that in the Lion version is no longer possible to burn a DVD using IDVD as mentioned in the help menu and in the Appel documentation online. I have tried with various other applications as well with no success. It is completely incomprehensible that Appel actually has removed this option from Ilife (IDVD) and I feel cheated.
I have now spoken with three different people from the support and none of them can give me a good explanation of how to burn an Imovie project onto DVD with this new operating system (which actually is a basic need). All documentation I find on internet and in the help section refers to iDVD, which is not included in Lion, and it does not even appear that I can buy the program separately. The new operating system is marketed as an improvement and this I find misleading advertising when such a basic need as creating a DVD is no longer possible (or extremely complicated). I do not experience that I have received the product I have been informed about in several stores and on Apple's website and considering of course to raise the entire purchase.
Does anybody know how to do this without iDVD? I want to create both a DVD frontpage and chapters as I have been doing on my pc for years.

Does anybody know how to do this without iDVD?
You can't. You MUST buy iDVD.
Tell Apple how you feel. They do read these comments, and often react. Be nice.
http://www.apple.com/feedback/idvd.html
http://www.apple.com/feedback/
(On the above link, you will notice under Mac apps they do indeed show, iDVD!)
If that doesn't work you can purchase iLife 11 on disk (don't get the download) for about $29. You WILL get iDVD.
or if you like downloads, go to the Apple Store via the Store button at the top, (not the App Store) and look for iLife 11 it will list iWeb and iDVD. It IS available online.

Can I Create a DVD in Captivate 5 to auto-run on Standalone DVD Player

I upgraded to Captivate 5 and created a 4-minute "infomercial" of our product. I was able to publish it as an exe so stores could play it on their Windows computer. I was also able to publish it as an Application so stores could play it on their Mac computers.
But how do I publish it for stores that just have a cheap stand-alone DVD player? Most DVDs the stores get from other vendors have a DVD with AUDIO_TS and VIDEO_TS files on the DVD and this just starts playing when they insert the DVD. I want to do that as well.
Adobe tech support said to publish my Captivate 5 project as SWF and check the Auto-play box. This generated about 5-6 files but none start up right away (although the one with an htm extension does run on my Windows Computer if I first click on it.)
Past Forum postings from years ago seem to say to Publish using F4V, convert using Adobe Media Encoder and then use Encore to create the final DVD. I did publish using F4V and then downloaded Adobe Media Encoder from your web site and ran the F4V file through that. Now I am stuck. Do I need to buy a $1,600 product called Creative Suite 5 to get to the last step and create a DVD that plays automatically when inserted in a Stand-alone DVD player? There must be a simpler (cheaper) solution. HELP!!!

Hi there
I'm guessing you will need to consider publishing as Media (F4V with Fixed Frame Rate). Then take that and pop it into a converter such as the ones you may easily find using Google.
Click here to view converters
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How can I create a dvd with NO theme?

I'd like to create a DVD that shows an image of my choice when inserted in player, with one play button start movie. All themes seem to have some moving graphic or fancy stuff.

Hi
Easy is to put movie into AutoPlay box in organizing view in iDVD window (top left most box)
But this ends in a menu - This can be a black photo to simulate No Menu
All themes seem to have some moving graphic or fancy stuff.
No - and especially the old ones. AND by using the mid round button under the iDVD menu window (the one with two semi-circular arrows) You turn off Animation - I always do !
from. Klaus1 in Somerset, UK
How to create a DVD in iDVD6 without menu (there are several options)
1. Easy. Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously.
Disadvantage. The DVD plays until you hit stop on the remote
2. Still easy. If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well).
Disadvantage. The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time. Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage. One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software. Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn.
Disadvantage. you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way". Postproduction with myDVDedit (freeware)
Tools necessary. myDVDedit ( www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager.
//lonestar.utsa.edu/llee/applescript/dvdimager.html
hope this helps!
From LynnLU USA
www.mediasoftmac.com/dvd-creator-articles/convert-mov-video-to-dvd-on-mac.html#1 29
Yours Bengt W

DVD Studio Pro - How to create a DVD playable on all mediums

I'm trying to create a DVD playable on all mediums, i.e Mac, PC, home DVD players. I have placed all assets in appropriate places etc, menus built correctly, end jumps etc set correctly. The simulation shows me what the DVD will play like on my mac, but when I burn (in HD mode using either DVD+RW or DVD+R DL) it does not play on PC or other DVD players, including my PS3 or XBOX360 any ideas why?

If you're in HD mode you're making a HD DVD. Search for info on it as there are lots of threads on here but basically you can only play HD DVD content (even if on DVD-R etc) in HD DVD Players. Not PS3, DVD Players and so on. If you have the (discontinued) 360 HD DVD drive add-on you can get the 360 to play it too.
If you want better luck you'll need to use SD DVD and search for tips on that.

Is it possible to create a DVD of photos that will play on a television?

Is it possible to create a DVD of photos from iPhoto that will play on a television?

Yes. You'll need a video DVD authoring application like iDVD and an external optical drive. I suggest a 3rd party optical drive as the Apple Superdrive is limited to USB 2 which has rather slow through put. Get one with USB 3 or FW.
Export a slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p. Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Or open iDVD, select a theme, create a slideshow in iDVD and add the photos from iPhoto via the Media Browser in iDVD.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
There are simpler (in features) video DVD authoring applications available from the App Store.

Is it possible to create a DVD in iDVD without using the themes they provide?

Is it possible to create a DVD in iDVD without using the themes they provide?

Hi
No Menu DVD
from. Mishmunken
How to create a DVD in iDVD6 without menu (there are several options)
1. Easy. Drop your iMovie in the auto-play box in iDVD's Map View, then set your auto-play item (your movie) to loop continuously.
Disadvantage. The DVD plays until you hit stop on the remote
2. Still easy. If you don't want your (auto-play) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the drop-zone (text needs to be black as well).
Disadvantage. The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time. Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage. One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software. Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn.
Disadvantage. you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way". Post-production with myDVDedit (free-ware)
Tools necessary. myDVDedit ( www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned. If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager.
//lonestar.utsa.edu/llee/applescript/dvdimager.html
hope this helps!
From LynnLU USA
www.mediasoftmac.com/dvd-creator-articles/convert-mov-video-to-dvd-on-mac.html#1 29
Yours Bengt W

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format

Creating bad DVDs

Similar Messages

Maybe you are looking for