Creating dll and calling it in labview crashing the program

Hi All,
I am using labview from quite a long time.But this time i am stuck with dll.Not able to solve this issue.
I have to communicate with FTDI chip.
I have a VC++ Project to communicate with SPI of FTDI.That Code is working perfectly fine.
Now I Have to automate that through LabVIEW. VISA Drivers i cant use in this. So Last option left is either to create dll or to make EXE out of it.
I have tried by creating DLL and then calling it in LabVIEW by using Call Library Function Node.But its not helping me out every time LabVIEW is getting Crashed.
Is there error in creation of dll or something i am not doing properly while calling?
Thanks In Advance
Shweta
Attachments:
old_dolphin_sub_spi_func_ftdi.c ‏21 KB
ftdi_write_read.vi ‏15 KB

Which function call crashes LabVIEW?
Have you tried switching the calling convention from stdcall to C for all of the DLL calls?
Why are you converting a string to a number, instead of using a numeric constant directly? If you want a number in hex, you can right-click a numeric constant, make the radix visible, and switch it to hex display.

Similar Messages

Creating DLL and identifying LVRTE for 32bit/64bit/WinXP/Win7

I have a labVIEW 2010 application (created on 32bitXP) to be distributed
for
-Windows XP 32 bit
-Windows XP 64 bit
-Windows 7 32 bit
-Windows 7 64 bit.
What kind of runtime engine will I need?
I also found that
- there is no runtime engine available for WinXP64 bit, what do I do for
this
OS?
- there are multiple runtime engines for LV2010 (min/std/64bit).
Can someone pls help me to dentify,
Which link to use for which OS/bit combination with LV 2010.
Also can someone help me to identify, if I need to build the application
(EXE
or DLL) in 4 different ways, for these 4 OS?
regards
Sandeep
NI Software : LabVIEW version 2010
NI Hardware : None device

Hi Greg,
Thank you for your response too.
Yes, I must have 32 bit RTE for running 32 bit DLL.
And also I do want to have 32 bit DLL only (& not 64 bit one).
To explain, let me propose the following case.
I have a C# created (built in 32 bit mode for x86) parent EXE .
I have C# created (built in 32 bit mode for x86) child DLL.
The child DLL gets called successfully by parent EXE. In all 4 possible OS combinations. ie. 32bitWinXP,64bitWinXP,32bitWin64,64bitWin64.
But..
When I create a 32 bit DLL from 32 bit LabVIEW on XP32bit,
it never gives me success to be called by 32 bit C# parent in 64bitWinXP, 32bitWin7, 64bitWin7.
I am aware that I must not create 64bit DLL, becasue my C# EXE is built in 32 bit (& That's how it must be to be able to run in all 4 OS combinations).
Below is my thread
http://forums.ni.com/t5/LabVIEW/Creating-DLL-and-identifying-LVRTE-for-32bit-64bit-WinXP-Win7/m-p/13...
Thanks for reading thru.

TS3406 I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

YOu will need to contact your cell phone provider to resolve those issue, those are carrier features.

My Iphone 4 32GB started having this issue when I downloaded the 2 last 6.1.X... VOICE CONTROL pops-up even when I sleep and calls random people just by the sound of the snoring... in FACETIME even more annoying. I confirm that it does this day and night

My Iphone 4 32GB started having this issue when I downloaded the 2 last 6.1.X... VOICE CONTROL pops-up even when I sleep and calls random people just by the sound of the snoring... in FACETIME even more annoying. I confirm that it does this day and night

Turn off Voice Control.
Otherwise, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).

I have photoshop elements 12 and when I use the font it crashes the program, how can I fix this?

I have photoshop elements 12 and when I use the font tool it crashes the program, how can I fix this?I have a macbook pro

Use the crop tool.
On the tool's option bar, type 300 px & 200 px, and the desired resolution.

I have the Photoshop Elements 11 and when I use the stamp effect the image becomes totally black. It used to have my line drawing in white, now, just a black image. I need the stamp effect. also, most other effects simply crash the program.

I have the Photoshop Elements 11 and when I use the stamp effect the image becomes totally black. It used to have my line drawing in white, now, just a black image. I need the stamp effect. also, most other effects simply crash the program.

Which operating system are you using?
Some filters like Filter>Sketch>Stamp need to have two different colors for the Foreground and Background set in the toolbox.
Press the D key to set the default toolbox color swatches to Black and White and then try the Stamp filter.
If your using mac os x 10.9 or 10.10, then some of the filters under Filter>Sketch will crash pse 11
They are Filter>Sketch>Comic, Graphic Novel and Pen and Ink
Otherwise resetting the pse11 editor preferences might resolve the crashing.
Go to Photoshop Elements Editor(Edit)>General, click on Reset Preferences on Next Launch and then restart the pse 11 editor

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
also use the Command-L to view logs during installation

How can we share and transfer data at Labview using the internet

How can we share and transfer data at Labview using the internet
Dr. Eugene Berman, Moran Kamilyan and Ravit Bar

[email protected] wrote:
How can we share and transfer data at Labview using the internet
Check these links:
Basic TCP/IP Communication in LabVIEW
Data Sockets
Integrating the Internet into Your Measurement System

How can you repair a pages document that crashes the program so it won't crash anymore

I have a Pages file 09' that crashes the program. I want to keep the file because of the time spent on it and formatting it. I am using a iMac with OS 10.8. I called support and they told me there was a Pages 11 out. I could not find it in the app store. I am using Pages version 4.3. This is the latest version I can find. You know the one, the one with the broken spellcheck program. I need to find a file repair utility. I do not want to just save the text. I want to save the file. Thanks.

I said you were using Snow Leopard because that is what is listed at the bottom of your first post. I don't know if it's just me, but I do find it difficult to edit that information since these forums moved to the current format.
I don't rely on the spell checker, mostly because spelling has always been a forté. Pages uses the system spell checker & does pick up the typos I make, so I don't know what to say about that.
Since the file can be opened biut crashes when editing it, you might try an old trick that often worked with AppleWorks & I've known of it working with Pages, too. Save the file with a slightly different name as an iWork '08 file format & then open that copy in your current Pages. You do not need to have Pages '08 to do this. In Mountain Lion, hold down the Option/alt key while clicking on the File menu & choose Save As…, check the box next to Save a copy as: & select iWork '08 from the drop-down menu like in this screenshot. This can often correct minor corruption.

I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR

Photoshop Elements 12 has been wiped of my laptop when they removed some viruses. How do I get it back because I bought it online and downloaded it instead of having the program disc?

How do I recover the program for Photoshop Elements 12 that was wiped off my computer when they removed some viruses? I no longer have the program because I bought it on-line and downloaded it instead of having the program disc. I bought it last year and can't seem to contact anyone at Adobe or find out who to call.

You can download it here:
http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
Follow the Very Important Instructions exactly, even when they don't seem to make much sense. Of course you will need your serial number.

I downloaded Photoshop CC 2014 last week and every time I open the program, I get an error message that reads "Adobe Photoshop CC 2014 has stopped working" and it forces me to close the program. How to I resolve this?

I downloaded Photoshop CC 2014 last week and every time I open the program, I get an error message that reads "Adobe Photoshop CC 2014 has stopped working" and it forces me to close the program. How to I resolve this?

Hi Noel,
I'm wondering whether your comment addressed to Lmono was intended for me Tmono.
You ask: "So why didn't you provide the same?"
It just didn't occur to me to do so.
My intent was to report that there was at least one other user encountering a similar problem. It occurred to me that Adobe might be interested in determining the scale of a problem which causes one of their best known products to fail to run quite so completely after a clean install
I also see that I misreported the OS I'm running - its Windows 8.
If there is further information I can provide which might be helpful in determining a solution, if someone could be specific about what would be helpful, then I will try to respond appropriately.
Perhaps the following from the event log:
Faulting application name: Photoshop.exe, version: 15.1.0.148, time stamp: 0x53d97a8f
Faulting module name: igdfcl64.dll, version: 8.1.0.2875, time stamp: 0x507eff6d
Exception code: 0xc0000005
Fault offset: 0x0000000000809283
Faulting process id: 0x1f48
Faulting application start time: 0x01cfca332430f3a7
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\windows\SYSTEM32\igdfcl64.dll
Report Id: 659ea6c9-3626-11e4-bea1-9c2a70825e62
Faulting package full name:
Faulting package-relative application ID:
The X230 has Intel HD 4000 graphics support built in to the processor. Windows was pretty stubborn about refusing driver updates, but I just managed to get drivers from the Intel site to install and Photoshop is now running, so hopefully I need not try your patience any further.
In case anyone else has a similar problem and stumbles on this the way to install the driver that worked was to:
- download the zip version of the generic driver from Intel
- use the 'have disk' option in the windows dialog to install the driver - other paths in the UI did not work with windows refusing to install the driver.

HT1926 Attempting to update Itunes, received System Error: "program can't start because MSVCR80.dll is missing form computer" try reinstalling the program to fix problem. Question , if reinstall Itunes via download, do I lose my music library?

Attempting to update itunes, received system error" Program can't start because MSVCR80.dll is missing from computer, try reinstalling the program to fix the problem. Question, I can't access Itunes to backup library, how do I reinstall without loosing music library?

It doesn't matter and doing a manual install will not fix the problem either. I'm looking for a solution but no luck yet. I think Apple has given us a bad update.

Hello! I recently updated my iMac to OS Mavericks, and every time I try open the program Cubase the computer just restarts. Have anybody had the same problem or a similar problem and that can try to help me?/Erik

Hello! I recently updated my iMac to OS Mavericks, and every time I try open the program Cubase the computer just restarts. Have anybody had the same problem or a similar problem and that can try to help me?/Erik

Linc Davis,
I have the same problem, and will post my panic report contents below... Any help is certainly appreciated.
Thu Nov 7 06:57:20 2013
panic(cpu 4 caller 0xffffff7f8b201fac): "GPU Panic: [<None>] 3 0 a0 d9 9 8 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x102c00000 0xffffff8100805000 0x0e7150a2, D0, P1/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 4), Frame : Return Address
0xffffff80ffce3af0 : 0xffffff8008e22f69
0xffffff80ffce3b70 : 0xffffff7f8b201fac
0xffffff80ffce3c40 : 0xffffff7f899f9cf8
0xffffff80ffce3d00 : 0xffffff7f89ac6e26
0xffffff80ffce3d40 : 0xffffff7f89ac6e84
0xffffff80ffce3db0 : 0xffffff7f89cf1f31
0xffffff80ffce3e20 : 0xffffff7f89aea011
0xffffff80ffce3e40 : 0xffffff7f89a00841
0xffffff80ffce3ef0 : 0xffffff80092ada80
0xffffff80ffce3f30 : 0xffffff80092ac522
0xffffff80ffce3f80 : 0xffffff80092ac5f7
0xffffff80ffce3fb0 : 0xffffff8008ed6aa7
      Kernel Extensions in backtrace:
         com.apple.nvidia.driver.NVDAResman(8.1.8)[3A2A3C2D-E129-3190-A682-E831B38F0FBF] @0xffffff7f899a9000->0xffffff7f89c13fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f89546000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f89999000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f89956000
         com.apple.nvidia.driver.NVDAGK100Hal(8.1.8)[3CF8C2FA-83E6-39E3-A5B7-C7CC839B8C7 5]@0xffffff7f89c1e000->0xffffff7f89dcdfff
            dependency: com.apple.nvidia.driver.NVDAResman(8.1.8)[3A2A3C2D-E129-3190-A682-E831B38F0FBF] @0xffffff7f899a9000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f89546000
         com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f8b1f4000->0xffffff7f8b206fff
            dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f8b1ec000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f8a208000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f89546000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f89956000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f8b1ef000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000008c00000
Kernel text base: 0xffffff8008e00000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 11367242923
last loaded kext at 8941821786: com.symantec.kext.SymAPComm          12.2f2 (addr 0xffffff7f8b30b000, size 20480)
loaded kexts:
com.symantec.kext.SymAPComm          12.2f2
com.parallels.virtualsound          1.0 22731.929773
com.Logitech.Control Center.HID Driver          3.4.0
com.symantec.kext.ips          3.5f2
com.symantec.kext.ndcengine          1.0f2
com.symantec.kext.internetSecurity          5.2f2
com.seagate.driver.PowSecDriverCore          5.1.1
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AGPM          100.14.11
com.apple.driver.ApplePlatformEnabler          2.0.9d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleHDAHardwareConfigDriver          2.5.2fc2
com.apple.driver.AppleHDA          2.5.2fc2
com.apple.iokit.IOBluetoothUSBDFU          4.2.0f6
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleThunderboltIP          1.0.10
com.apple.driver.AppleIntelHD4000Graphics          8.1.8
com.apple.driver.AppleMikeyDriver          2.5.2fc2
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMuxControl          3.4.12
com.apple.GeForce          8.1.8
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleIntelFramebufferCapri          8.1.8
com.apple.nvidia.NVDAStartup          8.1.8
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyEventDriver          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleUSBHub          650.4.4
com.apple.driver.AppleSDXC          1.4.0
com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleUSBXHCI          650.4.3
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.driver.DspFuncLib          2.5.2fc2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.iokit.IOSurface          91
com.apple.driver.AppleGraphicsControl          3.4.12
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.iokit.IOAcceleratorFamily          98.7.1
com.apple.nvidia.driver.NVDAGK100Hal          8.1.8
com.apple.driver.AppleThunderboltEDMSink          1.2.1
com.apple.driver.AppleThunderboltDPOutAdapter          2.5.0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.driver.AppleSMC          3.1.6d1
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.nvidia.driver.NVDAResman          8.1.8
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.driver.AppleHDAController          2.5.2fc2
com.apple.iokit.IOHDAFamily          2.5.2fc2
com.apple.iokit.IOAcceleratorFamily2          98.7.1
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
com.apple.driver.AppleUSBMultitouch          240.6
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.iokit.IOFireWireSBP2          4.2.5
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.driver.AppleThunderboltNHI          1.9.2
com.apple.iokit.IOThunderboltFamily          2.8.5
com.apple.iokit.IOEthernetAVBController          1.0.3b3
com.apple.driver.mDNSOffloadUserClient          1.0.1b4
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.

Creating dll and calling it in labview crashing the program

Similar Messages

Maybe you are looking for