Creating "Immediate" Transfer Order

Hi
I am able to create "Automatic" Transfer Order using a Batch job. But I am not able to cretae " Immediate" transfer order for a TR.
What are settings i have to make / check in order to enable immediate To creation.
Thanks in Advance.
Regards
ram

Hi Ram,
You can make immediate TO by using Reference Movt type - WM movt type mapping. Path is SPRO-LE-WM-Interfaces-IM-Define Movt types- LE-WM Interface to IM. Here you need to put X in column 9 (Create TR) and A (for Immediate Auto TO) in column 11. Try this and it should work. Also you need to maintain WMTA as output type for the delivery you want to have auto TO for.
I am sure this will help you.
Take Care
Manav

Similar Messages

While creating the Transfer Order system is not picking Sale order stock?

Hi All,
In the B2B process the system is not picking the stock from from sale order stock while creating the transfer order? Please suggest.
Summary : Here we are creating the PR in the sale order and STO is created using the same PR to procure the materials from the WM plant to sale order plant. Since here intialy we are moving the stock to our sale order in WM plant and then picking the same. But while creating the Transfer order system is not picking the sale order stock in WM plant.
Regards.

C S Javali
Check in schedule line in transaction flow whether Transfer Req /assembly is checked or not
Regards
Pradeep

Error while creating TO(transfer order) w.r.t delivery note.

I am usiing HU mgmt(Handling Unit Mgmt) with standard WH mgmt.
I hae taken recipt of process order in MB31 transsanction which at the end give Inbound delivry no.
now when i am going to create TO(Transfer Order) w.r.t that delivery no is gives error given below:
" No items or handling units to be placed in storage could be determined"
details:
The inbound delivery does not have any items or handling units for putaway.
i have tried by creating HU(Handling Unit) w.r.t t delivery & then try to create TO the same error was came at that time.

Hi,
can you check whether Warehouse number exists and transfer order creation is required or not at Delivery document under Picking tab

How to create automatic Transfer Order for posting change delivery mvt.321?

Hi,
We are using HU with WM functionality; While posting stocks after UD, the system creates a posting change delivery instead of directly posting the stock to unrestricted stock from quality stock.
Now that we have to process the ourbound delivery bu creating a transfer order and confirming it and also do a Post Goods Issue against delivery then only the system posts the stock into unrestricted stock.
Our client doesn't want to go thro' these process steps. They would like the stock to be posted to unrestricted automatically after UD stock posting (movement type 321). Is there a way out to automatically process the posting change delivery in the background including Transfer order creation and confirmation and PGI please?
Thank you,
Regards,
Madhavkrishnaa.

Pls see the customizing.
SPRO: Logistic Excution>Warehouse management>interfaces-->Define Quality management

Create a transfer order with consignment stock (K)

Dear all,
I need to create a transfer order from transaction ME21N. It is not a normal transfer order but it will be a trasfer order from stock K (consignment).
At the moment I am not able to create it.
The special stock field is not valuable.
Thanks
Regards
Matteo

Hi Matteo,
I'm not very familiar with consignment.
When you have consignment stock on your premises, it is owned by your vendor and when you take some pieces from it, you have to pay for these parts.
When you want to move your consignment stock from one plant to another it means that you withdraw material from the consigment stock (physically) and because of this the ownership of the stock changes. Henceforth there's no point in speaking about consignment stock since the stock has become your own stock (physically, due to withdrawal).
That's why I think you should move it first to your own stock (in SAP) and after that you could realize a plant to plant transfer.
This is only my idea , so please ask the others to confirm it, and please feel free to post this thread on the material management forum (SAP ERP - Logistics Materials Management (SAP MM)).
BR
Csaba

How to create Auto . transfer order

Hi Guys
How to Create Automatic transfer order after posting GR wrt PO
What are the settings required for this?

Hi,
Please refer the below link
http://help.sap.com/saphelp_45b/helpdata/EN/c6/f83db14afa11d182b90000e829fbfe/content.htm
Regards,
Deepak.

Error while creating a transfer order for delivery note.

Hi Gurus,
I have already created an outbound delivery. I am creating a transfer request as a basis for goods movement in the warehouse and to print the picking list. so i use the path:
Logistics -> Sales and Distribution -> Shipping and Transportation -> Picking -> Create Transfer Order -> Single Document.
Now here i enter the warehouse number, plant, delivery. when i press enter i get error "No items that are to be picked were found".
I went to the following IMG path -- Enterprise Structure --> Assignment --> Logistics-Execution --> Assign Warehouse number to plant/storage location.
Assign the warehouse to the plan and storage location.
Still i get the same error. Could some one help me out here?
Thanks in advance
Amit

Hi,
can you check whether Warehouse number exists and transfer order creation is required or not at Delivery document under Picking tab

Immediate Transfer Order Creation not occuring for Sales Document Type

Hello gurus,
I have a situation where a transfer order is not being created immediately for a specific sales document type.
Here is an example document flow of a desired scenario where the system is working:
Sales document type: ZOR
> Delivery type: LF
> WMS transfer order
The Item Category in this scenario is TAN.
Here is an example of the document flow in the current scenario where the system is not working:
Sales document type: ZPRD
> Delivery type: LF
The Item Category is also TAN in this scenario. The only identifiable difference in these scenarios is the sales document type. For the ZOR SaTY, a Transfer Order prints immediately once the delivery is created. For the ZPRD SaTY, a Transfer Order needs to be manually created after delivery creation.
Is there a configuration setting that is controlling this? Any help would be greatly appreciated.

Thank you very much for the link. When I insert the WMTA output type in the delivery output header, the Transfer Order is automatically created.
The problem I'm running into now is the configuration setting that controls this. I thought I figured it out when going to this IMG path:
SAP Customizing Implementation Guide --> Logistics Execution --> Shipping --> Basic Shipping Functions --> Output Control --> Define Print Parameters Shipping
When selecting the Delivery Note, the shipping point I was using was not configured in this location. I added the shipping point into this transaction, saved, and created a new order & delivery. However, the WMTA output type still was not automatically inserted into the delivery when saving. Is there another location I should be looking to fix this so that when I enter an order with a particular Shipping Point, the WMTA output type automatically appears in the delivery?

Creating a transfer order for a Billed Delivery

Hi,
After billing a delivery, wich already had picking confirmed, the picking field in the delivery was blanked.
Is there a way to create a new tranfer order for this delivery, even if it is already Billed?

Hi,
Thanks for the answers. After some tests we find the solution!
In this case we change the billing status of the delivery to "A", then was possible to create a new transfer order, without cancel the billing.
In Brazil we can´t cancel the billing document after the goods to have left.
Thanks,

How to create a transfer order for stock lying in consignment?

Hi All,
I'm stuck creation of Transfer Order. The scenario is for Intercompany Stock Transfer.
The delivering plant has the requested material as consignment stock only (in a bin in storage type HRC). When the delivering plant attempts to create TO for Outbound Delivery, the error says "System can not find storage bin". When I enter the source storage type and bin, the system says 'Storage type HRC doesn't allow negative stock figure".
My question is, how to enable the system to search the consignment stock?
Thanks,
Rana

Hi,
Pl refer OSS note 13006 which says
It is not possible to transfer vendor consignment stock from one plant to another plant (movement types 301 to 306 for special stock 'K').
A stock transfer by means of a delivery is also not supported (movement types 641, 643, 647).
Cause and prerequisites
This program function is not supported.
In order to implement this program function, it would be necessary to find a solution to the business-related aspect of the valuation problem:
Since the consignment price of a material from a vendor can be different in the two plants involved, it would be possible to manipulate the consignment liabilities towards the vendor prior to consignment withdrawals by performing a transfer posting and thus transfering the consignment stock to a suitable plant.
Solution
You can post the stock transfer in two steps:
1. Post the stock issue in the issuing plant using movement type 562 in combination with the special stock indicator 'K', for example.
2. Post the stock receipt in the receiving plant using movement type 561
in combination with the special stock indicator 'K', for example.
Hope this is helpful.
Regards,
vijay

Create collective Transfer order from collective outbound del?

Hello All
I created a group of deliveries and I got two outbound documents, now I want to create a collective Transfer order it gives me an error does not exist in T311 however the individual outbound delivery whiten the group could be picked
Can any one help me to solve this
Regards
Jacopo Francois

hi
Transfer order will create based on delivery document . U got two delivery document number.
So goto LT03
enter delivery document number
execute save.
again goto LT03
enter another delivery document number execute, save it
regards
krishna

Creating/confirming transfer order (WM) using bapi/function modules

Hi,
I usually use BDC to create transfer orders or other documents in WM, but i've been told that using BAPI is more correct. I'm new to this concept, so could you please tell me how i can find the apropriate BAPI/function modules available for this purpose in 46C ?
I thank you in advance,
Bruno

Hi Gisk,
i am trying ot create a TO based on a material document and year. Same function as transaction LB12. Do you know which function module i can use for this.
I am trying to use the function module L_TO_CREATE_SINGLE, i fill in the T_LTAK-MBLNR and T_LTAK-MJAHR. But do not know which fields to fill in.
Hope you can help me.
Grtz
Coeno

Sales Order which automatically creates Stock Transfer Order

Hi All,
I've the following configuration requirement....
-- A semifinished good SF1 will come to my company plant... (Stock Transfer)
-- This SF1 will get converted to SF2 (another semifinished good) inside my company. As a by-product Scrap S1 will be generated.
-- This SF2 will be transfered to vendor for external processing and producing Finished Good FG.
-- This FG will go to customer directly from the vendor.
My requirement is to create third party sales order for FG which in turn trigger PR->PO for FG. This will trigger a stock transfer for SF2 from plant to vendor. For this it will trigger a stock transfer of SF1 from plant (outside) to plant (my company). All this needs to happen when I save sales order for FG. Once the FG is saved, if I go to MD04 (stock requirements list), it should show stock transfer order for SF1, stock transfer order for SF2.
Now I've created SF1, SF2, S1 and FG in material master. Also created Customer C1 and other necessary details such as organizational units, partners etc.
Also I've created BOM for SF2 which includes SF1 and S1 and another BOM for FG which includes SF2 only.
At this moment when I create a sales order for FG and save (third party sales order), the PR is getting generated for FG. But for further levels of processing is not happening. I know that manually these stock transfers could be done. But I want this to happen automatically when I save the sales order for FG.
Please let me know what would be the ways to configue this.
Thanks in advance.

As per your thread,
1- SF1 transferred from Plant (P1)- to Plant (P2) - Cab ne mapped through STO Process / Transfer Posting from Plant-Plant(Mov type 301)
2- for this SF1, internal processing will be done in Plant-P2 to convert SF1 into SF2 in resuitl Scrap S1 will generate- Internal Production process (SF1 BOM - SF2 & S1 as child items)
3- Issuing SF2 to Vendor for further processing to convert into FG - Subcontracting Process ( SF2 - Input Material / FG - Output material)
4- Issuing FG directly from Vendor to Customer, based on Customer Order - Third party Order Processing.
As you know, through Configuration its difficult to achieve this. You may need to use the BAPI's to auto trigger these process one after the other. Still you should check feasibility.

How to create collective Transfer order for a collective outbound delivery?

Hello All
I created a group of deliveries and I got two outbound documents, now I want to create a collective Transfer order it gives me an error does not exist in T311 however the individual outbound delivery whiten the group could be picked
Can any one help me to solve this
Regards
Jacopo Francois

hi
Transfer order will create based on delivery document . U got two delivery document number.
So goto LT03
enter delivery document number
execute save.
again goto LT03
enter another delivery document number execute, save it
regards
krishna

How to create separate Transfer Orders for different items in a single D/O?

Hello gurus,
In my D/O there may are Item A and Item B. I would like to have separate transfer orders created.
1 T/O for Item A and another T/O for Item B. Currently, I get the message "L3131 No partial picking allowed for delivery documents". System does not allow.
I have checked D/O Doc Type LF and Item Cat TAN. I don't see any field which allows partial picking (unless I missed it?).
How / Where can I configure to allow such feature?

Hello,
I had exactly same problem, and I found no answer on the web.
A friend, Anderson Ranéa, Senior WM Consultant, helped me...
So... you need to set the flag PartialPick at: SPRO/LE/WM/Shipping/Interfaces/Shipping/Define Shipping Control/Shipping Control per Warehouse Number.
Regards.

Creating "Immediate" Transfer Order

Similar Messages

Maybe you are looking for