Creating New Source System Connection
[First post, so go easy on me!]
I have created a source system connection in BW QA, to an additional R3 QA client, but I am unable to assign any datasources to the new this new connection. [I know that I should have created the connection in DEV and transported through, but I need this connection for a small test, that won't be used again.]
To get round this, do I need to have my BW & R3 clients 'opened' again, then transfer the 'Application Component Hierarchy' via RSA9, then 'Replicate Datasources' in BW. If not, does anyone have any suggestions?
Thanks in advance.
Scott
Scott,
You will have to transfer the BC datasources that you want to use from R/3 to BW.
in BW, right-click your source system in the modeling tab and select replicate datasources, this will take you through to your R/3 system. Select the datasources you want to use and transfer them. Then go back to your BW system and right-click the source system and select "Transfer datasources". This should make them available.
If when you have got through to R/3 to transfer the datasources you are told that cross-client customising is not available then I think that you will have to get the client opened up.
Cheers,
Stuart
Similar Messages
-
Creating new Source system problem
Hi there,
System: BW 3.5 client 010, want to connect to R/3 4.6c Sandbox client 0101
we just refreshed our BW 3.5 sandbox with current production data. Now we want to create the source system via RSA1 to point to R/3 Sandbox. When we try to create this we get this new error. I am not sure why it is
Error:
Logical system BIX010 exists already
Message no. R3222
Diagnosis
The SAP Business Information Warehouse BIX010 is already connected to the source system. A multiple connection is not possible.
For some reason, it is reading as BIX010(talking to the system itself) - BW Sandbox systems, it should be doing the source system creation for SBX010 not BIX010 (talking to the system itself)
I tried to create the system manually and automatically, still no luck.
I cannot see SBX010 source system in teh RSA1, I am afraid it might be in the database table and not showing up in the transaction RSA1, does anyone know the table that it has this information, so I can se16 and look at the entries?
Does anyone knows where to look for?
Thanks in Advance
KumarGoto SM50 and check for ABAP connections. Look for SBX010. If you don'T find it here you have to create it. Check also BIX010 if it'S connected to the right system.
Regards,
Juergen -
Hi All,
I am trying to create a new source system in BW for the new R/3 client which is a copy of PRD.
So now new R/3 client is 200 and also PRD is 200. I did all necessary steps and i found difficulty when i am assigning logical system based on client. I found key is only client, so as PRD system is already mentioned with client 200 i am not able to create new entries and i hope this causing me error.
So by creating RFC destination directly in SM59 and when i tried to create it says PRD Client already available. Though i have specified new client server name.
Kindly advise.
This is quite urgent.
Thank You.
Best regards,
Bhuvana.hi,
it seems rfc connection between bw and r/3 not established properly, check with transaction sm59 (ask basis help if no authorization), choose r/3 source system rfc and menu test->authorization. check if user name and password, hostname/ip address are correct.
this doc 'bw r/3 connectivity' may useful http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
hope this helps. -
Change Default Background User In BW When Creating New Source System
Hi all,
I would like to create a new Source System in RSA1.
In Source Systems > SAP > Create > Connection of source system to BW
the Default background user in BW is u201CALEREMOTEu201D.
How do I change this to another user?Just want to say thank you. I could fix a problem with your information.
I was searching to change the background user from ALEREMOTE to BWREMOTE as all our process chains were running on ALEREMOTE. -
Creating new source system in bw
hi all
i have got one problem with creating source system to bw from r/3,i have created RFC connection to bw and r/3
and i was trying to create source system manually and automated but it is not activating i'm getting fallowing error
...the fallowing errors occurred in the source systemrsar--mess no 374
....result of destination check timeout rsarmess no 375
can any one help me on this pleaseHi!
Check out the connection with defined RFC.if it is ok,then check out the privliges for the user using which yuor trying to create the source system.
Best Regards
Sunil. -
Steps for creating new source system
Hi guys
We are on BI 7 and ECC 6 now...We are planning to get the data from other source systems (R/3 4.6)which are existed in different place.
Now my question is what are the steps to get the data from this new Source system and whats BI developer role for this...
Example: Inorder to establish the connection between BI and R/3 we need an RFC connection (Is this done by BASIS / BI )? If its BI , then what do I need to ask for ?
afterthat what are all the questions or points that I need to raise to the folks in the meeting...
Please advice
regardsHi
refer to this link below
http://help.sap.com/saphelp_nw04s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Exactly this will be taken up by BASIS team so that at any time if we have any issues with RFCs like RFC connection failure we will not get any data to our targets.
Then we have to raise ticket to basis stating this failure -
Source System Connection Problem - RSAR 371
We are attempting to create source system connections in our newly created NW2004s Dev system (sapdvbd1/BD1). We also have an existing NW2004s Dev system (sapsvbd1/BD1) which already contains the same source system connections. The old Dev system was on a virtual machine but due to performance issues we have built another Dev system on a real server. Is there any way to create these source system connections on both servers until everything has been moved from the old to the new? The same source systems need to exist on both. Thanks.
Hi ,
Please check with basis or if you can ,then try to restore the source system in BI/BW.This should correct the inconsistencies between the two systems which is being caused by different Idoc types
Also check the table RSBASIDOC in the BI system and compare this to R/3 system ,the "basic type" field should be same.
A restore should work,it has always worked for me.
Regards
Amit -
RSA1 - Source system connection : No connection to system possible
Hello friends,
I am creating a Source system connection from our BW system. I have already established the working RFC connection to source system which works fine, both side client is open & system is modifiable.
Bit i am getting error : No connection to system possible
No connection to system possible
Message no. RSAR501
Diagnosis
Logical system cannot be accessed.
System Response
Error during the retrieval of the logon data store d in secure storage
Procedure
Use transaction SM59 (for BAPI and SAP source systems) or DBCO (for database source systems) to check the RFC parameters of source system . Also check whether the system can be accessed in the network and whether the necessary application and system programs have been started.
I have already implemented SAP note 1276270 - RSAR 501 for source system restore due to router string /H/ without success.
thanks
ashishError during the retrieval of the logon data store d in secure storage
Have you tested the remote login also ?
Regards,
Subhash -
About creating a new source system on BW pointing to an Oracle database
hi friends
i m facing problems when i
creating a new source system on BW in AIX pointing to an Oracle database, our bw oracle use 10idatabase ,and we want to connet to 9idatabase(Windows) to get data for BW
(1.) in /oracle/P01/102_64/network/admin tnsnames.ora I hava add
SJPT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 68.16.211.177)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = SJPT)
(2) and in etc/hosts I hava add
68.16.211.177 SJPT
(3) in p01adm> tnsping SJPT it is OK
(4)but when i
in BW RSA1 DATA SOURCE
create db connect:
DBMS: ORA
USER NAME: SAP
DB PASSWORD: SAP
[email protected]
i t give me the error message :
ORA-12154: TNS:could not resolve the connect identifier
please help meHI,my trans.log file is
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 13.11.2007 - 10:16:48
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Nov 13 10:16:48 2007 81 0.000081
4 ETW000 [dev trc ,00000] db_con_init called 29 0.000110
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 50 0.000160
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/P01/SYS/exe/run/dboraslib.o' ...
4 ETW000 43 0.000203
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/P01/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000 13346 0.013549
4 ETW000 [dev trc ,00000] Library '/usr/sap/P01/SYS/exe/run/dboraslib.o' loaded
4 ETW000 32 0.013581
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000 35 0.013616
4 ETW000 [dev trc ,00000] Version of '/usr/sap/P01/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.46)
4 ETW000 53 0.013669
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000 34 0.013703
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000 53 0.013756
4 ETW000 [dev trc ,00000] New connection 0 created 23 0.013779
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.013818
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 45 0.013863
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 32 0.013895
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 37 0.013932
4 ETW000 [dev trc ,00000] Got LIBPATH=/usr/lib:/lib:/usr/sap/P01/SYS/exe/run:/oracle/P01/102_64/lib from environment
4 ETW000 325 0.014257
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 47 0.014304
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 3234 0.017538
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 28 0.017566
4 ETW000 [dev trc ,00000] Connecting as /@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 34 0.017600
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 35 0.017635
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000 36 0.017671
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 37 0.017708
4 ETW000 [dev trc ,00000] Allocating server context handle 24 0.017732
4 ETW000 [dev trc ,00000] Attaching to DB Server P01 (con_hdl=0,svchp=0x110f94398,svrhp=0x110fa6158)
4 ETW000 72 0.017804
4 ETW000 [dev trc ,00000] Assigning server context 0x110fa6158 to service context 0x110f94398
4 ETW000 36191 0.053995
4 ETW000 [dev trc ,00000] Allocating user session handle 73 0.054068
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000 43 0.054111
4 ETW000 [dev trc ,00000] Assigning user session 0x110f937a0 to service context 0x110f94398
4 ETW000 10613 0.064724
4 ETW000 [dev trc ,00000] Now '/@P01' is connected (con_hdl 0, nls_hdl 0).
4 ETW000 964 0.065688
4 ETW000 [dbsloci. ,00000] *** ERROR => ORA-942 when accessing table SAPUSER
4 ETW000 1183 0.066871
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 73 0.066944
4 ETW000 [dev trc ,00000] Rolling back transaction ... 28 0.066972
4 ETW000 [dev trc ,00000] Closing user session (con_hdl=0,svchp=0x110f94398,usrhp=0x110f937a0)
4 ETW000 146 0.067118
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 409 0.067527
4 ETW000 [dev trc ,00000] Try to connect with default password 23 0.067550
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 34 0.067584
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 36 0.067620
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000 36 0.067656
4 ETW000 [dev trc ,00000] Assigning username to user session 0x110f937a0 22 0.067678
4 ETW000 [dev trc ,00000] Assigning password to user session 0x110f937a0 41 0.067719
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000 37 0.067756
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000 33690 0.101446
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 36 0.101482
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1017 performing CON [dblink#3 @ 431]
4 ETW000 122 0.101604
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 431]
4 ETW000 34 0.101638
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'P01'" -
BW: Connect to new source system via special transport
Hello everyone!
I have a BW system connected to an R/3 source system. I have made a copy of the source system. Now I want all my models to be connected to both source systems. I heard that this can be achieved via special transport (i.e. place all source system dependant objects into a special transport request to be imported back into my BW system, but with the new source system assignment). Does anyone have any documentation on how to do this?
Best Regards and Merry Xmas!
Luís Andrade.Hi Luis,
There are two parts,
1) If you want to transport all your objects from current R/3 system to newly created r/3 system then you can create a TR and use it in SCC4 transaction during client copy. In the same fashion you can use RSA1---> transport connection and use the TR for system copy. After that once you release this TR all the objects will move from one system to another.
2) But if you have already moved all the objects in source system but now you want them to replicate in BI then go to SAP BI system select your source system and then from the context menu choose replicate datsources option, it will fetch everything from respective source system in BI.
Regards,
Durgesh. -
Connecting MSSQL as new source system
Dear all,
We want to connect a MSSQL server as a new source system in SAP BW 7.0.
Does anybody has a good "How to..." Paper which helps to connect MSSQL step by step to SAP BW?
Thanks a lot.
Regards
DanielFollow the below mentioned steps to create a dbconnect source system.
1. Goto RSA1 -> Source systems. Right click and Create
2. Give some name and description and hit enter
3. a. Con Name : Any name (SQLSRV, etc)
b. DBMS : MSS
c. UserName : Any username which is present in the SQL Server. Eg: SA.
If you have to use Windows Authentication, there is a seperate method :
For windows authentication, you will have to add your Admin login of BI Server to the SQL Server Security logins group (For Eg: If BI Server name is BID and the admin login for this server is BIDADM, you need to add BIDADM to Logins/Users group of SQL Server and also for the specific database).
d. Password : Anything.
e. Con Env : MSSQL_SERVER=<sql server name> MSSQL_DBNAME=<database name> OBJECT_SOURCE= DBO.
For Example:
MSSQL_SERVER=ps14apollo MSSQL_DBNAME=PROJECTSERVER_REPORTING OBJECT_SOURCE=DBO
Here ps14apollo is my SQL Server name. Similarly ProjectServer_Reporting is my database name. DBO should be the Object_Source for most of the SQL Server dbs. I think it should work in your case as well.
f. DB RECO = select or let it remain unselected.
g & h Max Connections & OPT Connections = 0, for unlimited connections.
Regards,
F-S -
How to create file type source system connection
Hi All,
I have to load data from Flat files , but when i checked the source system connections File type source system connection is not present. Please guide me how can i create the same.
ApoorvaHi Apoorva,
Goto RSA1 -> Source System -> Right Click on File Folder .-> Create -> Logical system Name as FLAT FILE -> Source system name is the description for this source -> Enter.
Once it is created you can right click from that file and check whether it has created properly or not.
When u r moving the objects which are created under this source, the same flat file source should have been created in the target system also. And check for the entry in the target system table RSLOGSYSMAP for the flat file when u r moving the flat file objects.
Regards,
Muthu. -
Create sap-source system in netweaver
Hello,
i want to create a R/3-(4.6c)-source system in my Netweaver-BI (2004s), but I have problems with the connection.
For the connection i created in the Netweaver a new destination and a user "User_A" with the profile "S_BI-WX_RFC / Business Information Warehouse: RFC-User in Warehouse.
In the R/3 I created a user "User_B" with the profile "S_BI-WX_RFC / Business Information Warehouse, RFC-User Extraction"
After creating the Source-System in the AWB with the destination and the 2 Users, I have to Log-On as an administrator in the R/3. After Log-In comes the message "User already exists in source system. Only continue if Profile and Password Are Correct."
Then I have to create the Destination in the R/3. There I fill in the "Logon"-Part my "User_A", but then I get the alert:
RFC user logon failed. Check the connection. Message no. R3 077.
Diagnosis: You tried to logon using the RFC user. This action failed.
System response: Name or Password not correct
But I'm sure that I made no mistake with the password.
Has anyone an idea what I did wrong?
Thanks
MalteHi,
Generally we maintain the Destinations and userids in both systems first, and then create the source sytem in AWB of BIW.
Have you created the Logical system names in both the systems ?
Have assigned the client to the logical system name to client in both systems?
Have you mentioned correct client in the destinations?
With rgds,
Anil Kumar Sharma .P -
Restoring the source system connection in BW
Hi all,
Ive been trying to upload data for 2 of my infocubes, and the extractions are bouncing. The message in R/3 is told me to check the connection. The RFC are fine. But when I tried to restore the source system connection (RSA1 in BW), it sent me the following error messages:
1.- Basic type ZS 118 does not exist.
2.- The following error in the source system:
3.- Incorrect IDoc type ZSAB023 in the ALE definition of the source system.
The description in each error is:
Error #1:
Diagnosis
IDoc type ZS 118 could not be found.
System response
Procedure
Please enter an IDoc type that exists.
Error #3:
Diagnosis
Incorrect IDoc type ZSAB023 in the ALE definition of the source system.
System response
Error when sending data to BW.
Procedure
Enter IDoc type ZS 118 .
They told me this IDocs are created automatically by the connection. Is that true?
How can I fix this, so that I can restore my connection and do the data extraction?
Thanks a lot
Regards,
VicHi Victor Tostado
1.- Basic type ZS 118 does not exist.
Type Transaction WE30. Check iDoc types Obj. Name : RSSEND -> press F7
a.) Enter 'RSSEND' in the Obj. Name field. You will see an entry similar to the one below:
RSSEND Data transfer from the source system (template)
[-] E1RSSH Data transfer IDoc: Header information
[+] E1RSHIE Data transfer Idoc: Hierarchy header information
E1RSTXT Data transfer IDoc: Texts
b.) Enter RSREQUST in the Obj. Name field. You will see an entry similar to the one below:
RSREQUST Data request to the source system
[-] E1RSRH Data request IDoc: Header segment
[+] E1RSRHI Data request IDoc: Hierarchy
[+] E1RSRTX Data request IDoc: Texts
[+] E1RSRMD Data request IDoc: Master data
[+] E1RSRIS Data request IDoc: InfoSource
c.) Enter RSINFO in the Obj. Name field. You will see an entry similar to the one below:
RSINFO Info IDoc
[-] E1RSHIN InfoIDoc: Status segment
E1RSPIN InfoIDoc: Data packet segment
E1RSEIN InfoIDoc: Error segment
d.) If any of the above do not exist, contact your BASIS Team.
2.- The following error in the source system:
Type Transaction SM59. Maintain RFC destinations
a.) Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding your source system d.) Logon Information should contain source system client and name & password for you remote logon.
3.- Incorrect IDoc type ZSAB023 in the ALE definition of the source system
Type Transaction WE21. iDoc Processing Ports.
receivers port is not available go to WE21 -> create port
a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 versiond. RFC Destination should be one created in SM59. If non-existent then create one.
I) Type Transaction SE16. Data browser (for R/3 -> BW Connections)
Enter RSBASIDOC Print out copy of all entries in table.
II) Type Transaction SM30. Msg Types & Assignment to iDocs
Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOC table for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missing entries.
Regards
Sangram Sutar -
Source system connection error
Dear BW Experts,
Now, i am in a critical situation,that the source system giving error in the quality system.So unable to extract data for testing.we have tried a lot getting any solution.
But now planning to connect the sand box system to the bw quality system.
The confusion is that if the sand box is connected to the bw quality system,then can i use all the developed objects(infocubes,ds objects,multi providers etc) which i had created before or design and activate all the objects again for the new source system.
If any body attended this type of issues earlier,please suggest me how to proceed....
Thanks & Regardas
DebasishHi,
u can connect ur bw quality system to ur sand box.
but u have to reimport all requests from Bw development to bw qualty.
Imp. u have to delete Source conversion routine before importing request.
Steps will be same like
1. replicate data source.....
2.....
etc..
/Sachinkumar.
Maybe you are looking for
-
I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them? No, they wer
-
Error raising new Leave Request
Hi guys, Some of our users are trying to raise a leave request in ESS and getting an error Use the input help to select an approver. The only change that has happened is that we recently upgraded from ECC 5.0 to ECC 6.0. Other than that there has bee
-
Inserting Timestamp into a SQL database
I am having a problem inserting a timestamp into a Sql Database. I keep getting this error or a different on when i format the timestamp differently. In the following code the timestamp is not formated at all. java.sql.SQLException: [Microsoft][ODBC
-
Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this wit
-
HT1316 forgotten security password
I have set a security password for my iphone and have completely forgotten what I set it too, how can I unlock my phone? any ideas please