Creating Outbound deliveries based on the sales order schedule lines

Dear all.
Is it possible to create outbound delivery documents based on the sales order schedule lines?
Eg:
Let's say I have sales order line item 10 with below mentioned requested delivery dates in its schedule line level.
30.07.2009
10.08.2009
20.08.2009
30.08.2009
Will it possible for me to create different deliveries for those 4 schedule lines individually? I should be able to create 10.08.2009 delivery without clubbing 30.07.2009 delivery with it.
Appreciate your help!

I'm not sure because I'm not before SAP but try transaction VL10E that is to create delivery for schedule lines. I'm not sure what are the split criterias.
Please check OSS note 113411 tha has many OSS note reference in this subject.
Regards,
Csaba
Edited by: Csaba Szommer on Jul 29, 2009 2:38 PM

Similar Messages

  • Manually Enter the Sales Order Schedule Line

    Dear All,
    I have a requirement where Sales Order will be created by Customer Service with Quantity and customer requested delivery date.  Subsequently Planning department will go to the sales order schedule lines and enter manually the delivery date and confirmed quantity (multiple schedule lines) based on the stock/availability.  They also need to do some changes in the shedule line if required.  But when I try, the manually entered schedule lines are disappeared.  Could any one advice how to set this up?
    Thanks,
    Regards,
    Venkat

    Hi Venkat
    A schedule line gets grade out because this has been determined . through schedule line determination. . Now in the shipping data tab you can change the schedule line tab if you want .  manually you can change the request delivery date also. 
    But it is not advisable to change the schedule line because again the affect of availability check will vary.
    But can we know for what purpose you want to change the schedule line when you create the sales order. Any reason .For what purpose you are going for that customization ?For what purpose?
    Regards
    Srinath

  • Returns PO based on Return sales order - schedule line problem

    Hi,
    We're designing a return to vendors process as the opposite of a purchasing process through a plant. So normally the process is:
    Customer places order
    We buy from the vendor (PO based on sales order)
    Goods arrive at the plant
    We deliver from plant
    The opposite process is:
    Customer wants to return
    We create return delivery
    Goods arrive at the plant (GR)
    We sent the goods to the vendor (return PO based on sales order)
    This all works, but in the second scenario the sales order gets two schedule lines instead of one. So the system confirms based on the planned delivery time instead of just based on the required delivery time. Since this is a returns process, it doesn't make any sense as we're shipping to the vendor at our convenience once the goods arrive.
    Any ideas how to resolve this? Schedule line settings have been changed to all different versions. Basically the relevant customizing is:
    item category - returns item set
    schedule line category - movement type 653, order type NB, item category 0, acct assignment category M
    Many thanks

    There are a few other places to check, but you probably have exhausted those areas.  You can turn of the availability check at the item category also especially if it is specifically for the return order.
    Sales and Distribution => Basic Functions => Availability Check and Transfer of Requirements => Availability Check => Availability check with ATP Logic => Determine Procedure for each delivery item category
    I have also run into issues with APO active and having unintended consequences on the order.  Another avenue to check if there are any customer specific code in a requirements routine or user exit.
    Jeff

  • Fix date/Quantity in the sales order schedule line

    Dear SD Gurus,
    When we select the fix date/quantity in the lsaes order item schedule line, what happen? Hhow does it imapact the MD04,V_V2 and can this item be seen in CO06 to change the item date manually?
    Thanks
    J.Black

    With fix/date and qty, you can't use rescheduling and back order processing. The setting assumes that you want to fix the date at the time of initial confirmation and therefore these functions are not relevant, and ignore anything with fix/date and qty.  If you want to use those functions then don't use fix/date and qty.
    Rgds
    Richard

  • Sales Order Schedule line not populating in the Production order

    Queation: Is there a way to tell the system to look at the sales order, line item AND schedule line. It is displayed in MD04 but it doesn't carry over to the Production Order. We are a MTO and this information is relevant in a number of ways. 
    Please Help.

    Vickie,
    If you are using MTO scenario then when you run the MRP for the material, it will create a planned order for that sales order based on the dates calculated from the sales order schedule line (Shipping tab)...
    So now when you convert the planned order to production order, all the sales order details will get copied.
    try and revert back.
    Swapnil

  • Sales order schedule line quantity update

    Hi
    I'd like to know if there is a FM to update the Sales order schedule line quantities.
    In particular, the fields in VBEP:  WMENG, BMENG, LMENG, CMENG.
    Thanks.

    Hi Lily,
    Can you please tell us how you updated BMENG using the BAPI BAPI_SALESORDER_CHANGE?
    Thanks,
    Vitz.

  • Sales Order schedule line from CN to CP

    Hi,
    When i  update the sales order schedule line from CN to CP , the quantity is not showing in the MDO4.
    Can any one help me.
    Thanks in advance
    Suresh S

    Once the schedule line category is changed to CP,  just hit the enter key and save.  Now check in MD04
    thanks
    G. Lakshmipathi

  • Link between Prod Order and Sale Order schedule line

    Dear all,
    Ours is a MTO (81).
    In Scheduling Agreement / Sale Order , there are multiple schedule lines for a single item .
    Production Orders are generated for every schedule line of the Item.
    The client wants to know (for a custom developed report) , against which schedule line of the Sched Agreement/ Sale Order, the Production Order is generated ?
    This Information can be seen in MD04.But  I am not able to fetch from the tables .
    The schedule line field (KDEIN ) is not updated in AFPO table & the order no (AUFNR) is not updated in VBEP table .
    Say,
    Sale Doc No : 42000506
    Schedule line/Dely date            Order qty          Prod Order No
    06.10.09                                    500kg               100170
    15.10.09                                    300kg               100171
    Pls give your valuable inputs.
    Regards,
    Sheik

    Hi,
    Only Sales Order No & Sales Order Item No is updated in the table.
    Whereas , I want to know the Sales Order Schedule Line no.
    Regards,
    Sheiki

  • PP: Production Order Qty UOM should be based on the sales order Qty UOM though having Alternate UOMs in material master

    Hello PP GURUS I am new to this and i have one issues. I.e., While creating the Production Order, want the unit in the production order should be based on the sales order unit instead of what has been defined in the material master. Since, having 3-4 alternate unit of a material & can create a Sales Order in any one of them.
    Also pls let me how to go through
    either with the help of ABAP or configuration.
    If it is with the configuration pls let me know the solution to arrive.
    Eg: Base UOM is KGS
          Alt UOMs: SQM, MTR, NOS
    Sale order is Prepared with SQM and the same shall be in production order too to produce qty.
    Pls help me.
    rgds,
    Kumar V

    Hi
    First you have to maintain alternate units in mateial master for that first go in additional data & maintain the alternate units as below..
    For example
    1200 M2=1 KG For SQM
    12 M=1 KG For MTR
    3 PC=1 KG For NOS
    And then you can get Sales unit field in sales data 1 view enter your sales unit in that field & you will get production unit in work scheduling views as per your desire production units and according to that units your sale order & production order will pick that units & you can proceed accordingly but remember that first maintian the conversion factor as above other wise it will not accept hope that it will help you have a nice day...
    Regards,
    Reena

  • Create Outbound delivery with QCI from Sale order

    Dear experts!
    Now, I'm getting some issues about searching function to create outbound delivery with QCI from Sale order.
    Note: My sale order have two item (10, 20) and when i create outbound delivery I also want to create QCI for them.
    Help me, Please
    Best regards, Huy.

    What is QCI?

  • Interesting and an  imporatant issue at sales order schedule line.

    hi all,
    interesting and an  imporatant issue at sales order schedule line.
    i created a sales order with 10 qty.and the system proposed a two schedule lines.
    let's say to order created date is 27.11.2008.and the requested delivery date is 27.11.2008.
    but the stock is not available today then the system proposed two more schedule lines apart from the 27.11.2008.so now there are three schedule lines like below.
    schedule line date                      Material availabilyt date   delivery date                   
    27.10.2008 with zero quantity.     
    28.10.2008 with 5 qty.                28.10.2008                     29.10.2008
    02.10.2008 with 5 qty.                02.10.2008                     03.10.2008
    now the delivery and pgi already for the schedule line 28.10.2008.
    then when i run the availability check on 01.11.2008 system is over writing the material vailability date as today at the scheduleline number two.
    now i can able to view only two schedule lines only.
    schedule line date                      Material availabilyt date   delivery date                   
    28.10.2008 with 5 qty.                01.11.2008                     29.10.2008
    02.10.2008 with 5 qty.                01.11.2008                     02.11.2008
    now my concern when we reschedule the avalability check it should notchange the Material availability date of the schedule line which i already delivered.
    Regards,
    sheshukumar

    can any one repsond for this.....

  • Sales order schedule line quantities in decimals

    Gurus - Required your help to resolve the following scenario.
    I'm facing with the problem where schedule lines of a sales order allocated with decimal quantities even though materials with UOM as EA(Each). For example Material A of sales qty 13 has the schedule lines allocated as 11.960 and 2.040. The delivery has been created as per the schedule lines with qty 11.960 and 2.040 and it has been pick/packed and delivered to the customer. Now, while issuing goods for the delivery, received the error message as <b>"Serial number management only allows whole numbers".</b>
    Can anyone provide what are the possible ways to round the delivered qty and issue the goods, when the delivery is complete?

    Sree - Question 1 - Why would you deliver the product and then try goods issue it (In general ;)...anyway....I know, a lot of companies do that way....
    Question 2 - How much exactly did you ship out, surely must not have shipped products in decimals, since you've EACHES defined and not KGs....or LBs...
    I would suggest finding out the correct quantities shipped out and then cancelling this delivery document....you can then go on to modify sales order schedule line accordingly and then process it again..."WHAT ABOUT PICK PACK DETAILS"....before cancelling this delivery doc out..capture the packing details (HUs) and then apply them to the new delivery doc... if you are using external system for packing HUs.....process the IDOC (or file etc) using the new delivery doc number....
    Hope you got the direction )
    Thanks
    Nikhil

  • Blocking RdA creation from Sales Order Schedule Line

    Hi Gurus,
    please do you know if there is a way to block the RdA creation from Sales Order schedule line, for TAS item category? I tried with Header Delivery block without quantity confirmation but even if quantity on schedule lines are not confirmed, RdA is created anyway.
    Thank you very much
    Kind Regards
    Andrea

    thank you

  • VL01N does not to pick Sales order schedule line quantities

    Hi,
    I need to get Sales order schedule line quantities into VL01N when creating a Delivery document. Currently irrespective of the schedule line size quantity the existing stock quantity is picked into VL01N.
    Is there anyway to get this done? doe it require a user exit modification or cna this be done via IMG.
    Thanks & Rgds,
    Pradeep
    Edited by: PRADEEP GUNAWARDANA on Aug 1, 2009 5:06 PM

    Hi DB49,
    Thanks for responding.
    Let me clarify, the schedule line item i meant was, in my case this is an AFS scenario were we maintain size wise quantities.
    My issue being for example;
    Sales order line item 10 - Qty 1000 (sizes S - 250, M - 500, L - 250)
    Stock created in excess of this requirement, so size S - 1000, M - 1000, L - 1000 in stock
    In VL01N, when creating the DN for line item 10, it picks the Quantities in stock (which is 1000 each) ... instead of limiting it to the Sales order quantities of sizes S - 250, M - 500, L - 250.
    Hope this is clear ... please advice.
    Thanks,
    Pradeep

  • Mapping between Sales Order-Schedule-Line and Delivery-item

    Hi together,
    I want to extend the Datasource 2LIS_12_VCITM (Delivery-number, -item, Order-number,-item is available) by Sales Order Schedule Line.
    Could not find any ERP table (VBEP and LIPS allow a mapping only on item level) for the mapping between Sales Order Schedule Line and Delivery item yet. The use of the extractor 2LIS_12_VCSCL for the extention (e.g. infoset) afterwards is no option.
    Thanks for your help in advance!!
    Assign full points!!
    Sven

    Hi Reddy,
    thanks for your answer.
    I know that I have to add this field.. but the problem is, how to fill this field. I don't know how to map the delivery-item with the schedule line-item.

Maybe you are looking for