Creating Protection Group Fails with Error:360 The operation failed due to a virtual disk service error

Hello
I'm setting up a DPM server (2012 R2) at a remote site; everything goes well with no issues until a protection group is created, at which point I get the following error;
Create protection group: Protection Group 1 failed:
Error 360: The operation failed due to a virtual disk service error
Error details: The system cannot find the file specified
Recommended action: Retry the operation.
The environment is as follows;
- Virtual Machine Running Server 2008 R2 Fully updated
- Storage Pool is an iSCSI connection Thick Provisioned 1TB GPT and shows in Disk Management with no issues.
- Have connected to Session 0 (console) 
- Error log shows The provider did not receive a Plug and Play service notification for the volume. volume=10  for the VDS Dynamic Provider
Can Anyone Help?
Thanks
.Adam Langdon

Hi,
Disk defrag is initiated when a volume shrink is attempted. See if there is any problem defragging a volume and correct any problems doing that.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

  • Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"

    This is what is happening after installing 2010 on to a computer that was running 2007 Outlook.  Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
    error. Then a pop up dialog box comes up with the following error
    Receiving reported error (0x80004005): The operation failed
    Does anyone know how to fix this
    Nexusxox

    Hi,
    Glad to know that you have found the solution.
    Thanks for your generous sharing. Have a nice day : )
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Infopath has encountered an error. The operation failed. Not enough storage is available to process this command

    hello,
    Using INFO PATH 2013 on Windows 7 64 bit, user is getting the error "Infopath has encountered an error. The operation failed. Not enough storage is available to process this command"
    We added the registy IRPStackSize and set it to max 50. This works on my test machine but not this user.
    So when using infopath designer 2013, then blank form and data connection, we select Receieve Data-->Sharepoint Library or list and then enter the url to connect to and the user gets the error "Infopath has encountered an error. The operation failed.
    Not enough storage is available to process this command"
    We use office 365 of course with Sharepoint.
    I am able to run infopath 2013 as an admin and I am able to connect fine, but not with his standard profile.
    Any ideas, please let me know.
    Best regards,<br/> <br/> <strong>Joe C<br/> </strong>Partner Online Technical Community<br/> -----------------------------------------------------------------------------------------<br/> We hope you get value from
    our new forums platform! Tell us what you think:<br/> <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads"><span style="color:#0033cc">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads<br/>
    </span></a>------------------------------------------------------------------------------------------<br/> This posting is provided &quot;AS IS&quot; with no warranties, and confers no rights <hr>

    side note, i am able to connect on his pc with a standard user account so something with his windows profile that's corrupted, anyone know?
    Best regards,<br/> <br/> <strong>Joe C<br/> </strong>Partner Online Technical Community<br/> -----------------------------------------------------------------------------------------<br/> We hope you get value
    from our new forums platform! Tell us what you think:<br/> <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads"><span style="color:#0033cc">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads<br/>
    </span></a>------------------------------------------------------------------------------------------<br/> This posting is provided &quot;AS IS&quot; with no warranties, and confers no rights <hr>

  • Outlook 2013 Exchange 2013 Address Book Error 0x8004010F : The operation failed. An object cannot be found.

    Hi,
    We have Exchange 2013 running in our network, and are using Outlook 2013 on all PCs. We added some users several weeks ago, and they are not showing up in the Address Book. When we try to download the Address Book in Outlook, we receive the error 0x8004010F
    : The operation failed. An object cannot be found.
    Please let me know how I can start to troubleshoot this.
    Regards,
    Chris

    Hi
    There is a multiple reason to receive an error 0x8004010f, it is just a generic MAPI error.
    Let’s check all settings are configured the way it is supposed to be: -
    1.    Make sure the authentication setting is set up properly by using this command: -
    Get-OabVirtualDirectory -ADPropertiesOnly | ft Identity, *Auth* -AutoSize
    2.    Check URL’S are configured properly: -
    Get-OabVirtualDirectory -ADPropertiesOnly | ft Identity, *url* -AutoSize
    3.    Check the location of OAB: -
    C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB
    4.    Now find out the location of the database on which the Arbitration mailbox resides: -
    Get-Mailbox -Arbitration | where {$_.PersistedCapabilities -like “*OAB*”} | ft Name, Servername, Database
    Get-MailboxDatabaseCopyStatus MGUxxx
    5.    It is also important to ensure all database has the OAB set up properly for this use CMDLET: -
    Get-MailboxDatabase | Ft Name, *book*
    6.    If one or more database does not have OAB setup, then use CMDLET to set OAB for it: -
    Get-Mailboxdatabase | Set-MailboxDatabase -OfflineAddressBook “Default Offline Address Book”
    7.    If the issue is affecting only one or specific set of users, then check they have an OAB specified on their account: -
    Get-Mailbox abc.xyz | fl Name, OfflineAddressBook,Database
    Please correct me if the information that I am having is wrong.
    Reply awaited.
    Thanks and regards
     Ashish@S  
    Ashish@V

  • When I try to move files from my mac (v10.8.5) to my external harddrive I get the error message The operation can't be completed because an unexpected error occurred (error code -50).

    When I try to move files from my imac (v10.8.5) to my external harddrive I get the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." How can I resolve this? Thank you.

    Some other things to look at.
    https://www.google.com/search?btnG=1&pws=0&q=The+operation+cannot+be+completed+b ecause+an+unexpected+error+occurred+(error+code+-50

  • Why can't I import my phots's fom my digital camera? I get this error message The operation couldn't be completed. (com.apple.ImageCaptureCore error -9912.)

    The operation couldn’t be completed. (com.apple.ImageCaptureCore error -9912.)

    The com.apple.ImageCaptureCore error may be a system issue.  Try applying this updaters:
    OS X Lion Update 10.7.5 (Client Combo)
    OS X Lion 10.7.5 Supplemental Update
    and then try again.  Also try reformatting the memory card with the camera, take some test shots and try importing those photos.  This is to rule out a card issue.

  • Outlook 2007 after updates to iTunes and iOS: Task 'iCloud - Sending' reported error (0X80004005): 'The operation failed.'

    Since updating to the latest iTunes and the latest iOS, I am now unable to send calendar invites, which is what I use to keep my personal calendar, iCloud calendar, Thunderbird calendar, and two different work address calendars in sync.
    I've traced the problem to the inability of Outlook 2007 to send emails after the update.  I get the above error message when I try.
    One thing I noticed is that the location of my iCloud inbox and outbox changed to a location under my Personal Folders as opposed to where it used to be, under iCloud.  I think the issue is with the creation of different *.pst files and their locations, and the settings that Outlook 2007 automatically picked up after the iTunes and iOS updates.
    I'd like to fix this, but am not quite sure how.  I think it has to do with not being able to set the data file I believe to be the proper item as the Default.
    I assume others have also experienced this issue.  If so, has anybody managed to solve it yet?  If you have, please share your solution.
    -- Thanks,
       Mary

    Hi,
    Glad to know that you have found the solution.
    Thanks for your generous sharing. Have a nice day : )
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • CS4 Bridge Error Message-"The operation couldnot be completed. Not Enough MEMORY ERROR MESSAGES

    http://forums.adobe.com/message/3469769
    I originally posted this in Photoshop but employee thought expertise was lacking in that forum and that I should move my question to this one.
    Seems very few Adobe CSx users use Bridge....go figure!
    Anyway getting error messages that there is not enough memory in Bridge to continue and I must restart Bridge.
    Refer to the above link for original question and all pertinant computer data.
    Seems this is a very prevelant problem in both the PC and MAC environment but Adobe has felt not important enough to help(see employee comment or lack thereof).
    Any help would be appreciated.
    I am not real "computer" saavy so please speak so("Idiots Guide To Adobe Bridge ; >) )
    Dan

    Apparently not.  I'm still seeing it in the Photoshop Windows forum - though it's anyone's guess WHAT you'll see with this Jive Turkey forum software.
    -Noel

  • The operation failed because of a protection agent failure. (ID 998 Details: The semaphore timeout period has expired (0x80070079))

    Recently we got this error, while backup to tape, and no idea what is it.
    What cause of this error?
    The operation failed because of a protection agent failure. (ID 998 Details: The semaphore timeout period has expired (0x80070079)
    DPM 2010 with latest roll-up (KB2250444) | DELL Server R710 (Windows 2008 R2 SP1) RAM: 24GB PF: 36-60GB | DELL TL2000 (2 Drives) | And still struggling and monitoring... :(

    Hi,
    Try this workaround, increase the TcpMaxDataRetransmissions to 10 or more.
    How to modify the TCP/IP maximum retransmission timeout
    http://support.microsoft.com/kb/170359
    Diagnostic steps when "Semaphore timeout" is hit during network transfer:
    1. Check if the protected server (sender) or DPM (receiver) was under stress or inaccessible during the time of failure – from event logs from both the machines. Retry should work if the packet loss was because of either of the servers being inaccessible
    or under stress for a period.
    2. Check if the network between the PS and the DPM is flaky – retransmit count from ‘netstat –s’ or perfmon counters can give an idea.
    3. Else contact network support engineer to diagnose the packet loss issue – netmon captures from both machines, packet route and network layout/devices will be required to start the investigation.
    4. Take some performance monitor logs on both DPM and Proteted server side.
    Some good and basic perfmon counters to take to see if the servers are under stress are below.
    Logical Disk/Physical Disk
    \%idle
    • 100% idle to 50% idle = Healthy
    • 49% idle to 20% idle = Warning or Monitor
    • 19% idle to 0% idle = Critical or Out of Spec
    \%Avg. Disk Sec Read or Write
    • .001ms to .015ms  = Healthy
    • .015ms to .025 = Warning or Monitor
    • .026ms or greater = Critical or Out of Spec
    Current Disk Queue Length (for all instances)
    80 requests for more than 6 minutes.
    • Indicates possibly excessive disk queue length.
    Memory
    \Pool Non Paged Bytes*
    • Less that 60% of pool consumed=Healthy
    • 61% - 80% of pool consumed = Warning or Monitor.
    • Greater than 80% pool consumed = Critical or Out of Spec.
    \Pool Paged Bytes*
    • Less that 60% of pool consumed=Healthy
    • 61% - 80% of pool consumed = Warning or Monitor.
    • Greater than 80% pool consumed = Critical or Out of Spec.
    \Available Megabytes
    • 50% of free memory available or more =Healthy
    • 25% of free memory available = Monitor.
    • 10% of free memory available = Warning
    • Less than 100MB or 5% of free memory available = Critical or Out of Spec.
    Processor
    \%Processor Time (all instances)                                                                   
    • Less than 60% consumed = Healthy
    • 51% - 90% consumed = Monitor or Caution
    91% - 100% consumed = Critical
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.

  • External hard drive networked via AirPort Extreme gives "The operation can't be completed because an unexpected error occurred (error code -50)" roughly every two days

    My lab has about 10 Mac computers.  We all access a central hard drive by the way of wifi provided by AirPort.  It's just a regular external hard drive (Seagate Desktop Drive) that I turned into our central storage space by plugging it into AirPort (USB).  It works pretty well.  We seem to be fine with viewing the file directories, opening files, saving, deleting etc., for a day or two.  But then after a day or two, when when trying to modify files or move new files onto the central hard drive, we get the error message: "The operation can’t be completed because an unexpected error occurred (error code -50)"
    Any suggestions as to what may be causing this problem?
    All of the computers are 2011 iMacs & MacPros.  The AirPort is 802.11n WiFi.  The hard drive is a Seagate USB 3.0 Desktop Drive.
    Thank you for your insight/suggestions.

    Thanks for your reply.  I agree about the communication issue. Let me explain my setup and what I am trying to do and perhaps you can answer my questions or make suggestions.
    I have a MAC Mini with a Sony TV for the video monitor.  The  Mac Mini is hard wired to the AE (Airport Extreme).  The AE has a 2 TB HD hooked up to the USB Port.  I have a 17" Mac Book Pro on the WIFI Network.
    I am trying to use the MAc Mini as a "Media Server" of sorts.  Once I get iTunes running the way I plan I am goign to hook up my Apple TV (2nd Generation) to my television downstairs.
    What I am trying to accomplish is have iTunes on all my computers look to the External HD on the AE for the files.  This is why I am having my (-50 errors).
    So far I have noticed that if I go and try to download from iTunes purchased videos that are not ont he computer (to the external HD) it will also occassionaly give me teh -50 error.
    Is there a way to change where the files go when I download them?  Say I want to download videos to the computer but not to the external HD?  However I would want to still be able to move them to the External HD.

  • The operation can't be completed. An unexpected error occurred (error code 0).

    Yosemite is driving me crazy ....
    I have a home network with two iMacs and two TimeCapsules, and my MBP is also in this WLAN network. The TimeCapsules are serving for TimeMashine, one for each of the iMacs. And the MBP is opened for file sharing to allow syncing of data. When I try to mount either the MBP or the TimeCapsule (1 TB with software version 7.6.4, configured to allow/enable file sharing) on the iMac (21,5' Mid 2010, running 10.10.2) I get this error message:
    ===
    The operation can’t be completed.
    An unexpected error occurred (error code 0).
    ===
    However, the device is mounted and available. And I can access the files on both "Servers" using the Finder normally.
    What is going on?

    I assume that the flash drive format (from what I´d been reading) most be fat32....not accepting more than 4 gigas...
    That would be the problem.
    What format does Disk Utility tell you the flash drive is?
    Try reformatting the flash drive?

  • Can't create protection groups on the Azure Portal with on-premise hyper-v to Azure

    I’m trying to setup Azure Site Recovery on-premise hyper-v to Azure. I have successfully configured the Hyper-V Sites and installed the provider with the registration key. Both servers
    show green. I see my hyper-v server on the server tab.
    The issue occurred when I’m moving to the next step “creating a Protection Group”. When click on the “create new protection group” I’m getting the error saying "An error
    occurred while retrieving the list of servers".
    I had this error also yesterday and I tried to delete the sites, vault and create everything again. I used the unregister scripted
    https://msdn.microsoft.com/en-us/library/azure/dn903160.aspx?f=255&MSPPError=-2147217396
    Still I got the error today again.
    I really don’t understand what I’m doing wrong.
    Ps. I followed this guide
    http://www.ms4u.info/2014/12/configure-azure-site-recovery-asr.html

    Your welcome, glade I could help you out. I'm kind of stuck myself with site-to site vpn part. I made the posted here with all the details.
    https://social.msdn.microsoft.com/Forums/en-US/4f981cda-52ea-41e9-b9e7-4c34bb7367b8/need-help-to-configure-a-vpn-connection-to-an-azure?forum=WAVirtualMachinesVirtualNetwork
    I want to make a planned failover and connect the network with the virtual machines. Somehow the vpn connection fails on phase 2.

  • The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

    I am having problems  saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
    The document could not be saved. The server said:
    “The operation failed because an unexpected error occurred. (Result code 0×80020005)”
    Please ensure you have completed all required properties with the correct information and try again.
    I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
    Adobe Acrobat version 10.1.13
    SharePoint 2010

    Hi quodd,,
    We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
    1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
    2. How are you opening and saving the PDF, the exact workflow?
         Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
    3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
    4. Please verify that columns name do not contain spaces or some other special characters.
       Can you try to save PDF to library with Custom template and just a single managed metadata column  with a simple name
    Thanks,
    Nikhil Gupta

  • The operation failed because of a protection agent failure. (ID 998 Details: Unknown error (0x8007620f) (0x8007620F))

    I keep getting the following error when trying to run a backup:
    The operation failed because of a protection agent failure. (ID 998 Details: Unknown error (0x8007620f) (0x8007620F))
    Any resolution to this issue is greatly appreciated. Thank you.

    Hi
    First we Need some more Informations.
    What are you trying to Backup?
    Has it worked before?
    Are there any Errors on the Agent Tab?
    Are there any Errors on the affectet Server in the Event Log?
    Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
    facebook.com/techguyat |
    youtube.com/techguyat

  • Error message when opening Outlook: The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.

    In an Exchange 2010 server/Outlook 2013 environment, one of our users is getting an error message every time they start Outlook. The error message says: "The operation failed. The messaging interfaces have returned an unknown error. If the problem
    persists, restart Outlook."
    The error log message details are as follow:
    System
    Provider
    [ Name]
    Microsoft Office 15 Alerts
    EventID
    300
    [ Qualifiers]
    0
    Level
    4
    Task
    0
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2013-01-08T15:54:49.000000000Z
    EventRecordID
    655
    Channel
    OAlerts
    Computer
    Computer-Name.domain.local
    Security
    EventData
    Microsoft Outlook
    The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
    301670
    15.0.4420.1017
    xyfc
    0x8004011B
    The system is as follows:
    Size of .pst file: 2.3 GB (Unicode format so there should be plenty of space left)
    OS: Windows 7 (64-Bit)
    Application: Outlook 2013 (32-Bit)
    The user upgraded from Outlook 2010 a few months ago and the error message has only recently started appearing on startup. I thought it was a corrupt mail profile, so I have already tried creating a new mail profile, as well as the repairing tool in Outlook.
    I even tested another email account and that worked just fine. So apparently it is something wrong with the specific user's account/profile and not something wrong with the computer - since my email account worked fine on his computer.
    Any help would be greatly appreciated.

    I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message. 
    After I clicked okay I could get into Outlook.
    Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop.  The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
    laptop (so I knew it wasn't a corrupt profile).  This led me to the conclusion that it was a corrupt item(s) in my mailbox.
    To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
    narrow down which folder had the corrupt item if the problem recurred.  I'm happy to say my issue is now resolved.

Maybe you are looking for

  • Can i sync two iPhones to one iTunes?

    As of above my wife has had an iPhone for just over a month now and is looking to update to IOS 5 as I have. My question is whether when I plug her iPhone in and run the update will all her data be lost and get wiped by my data? We both have differen

  • Remote producer exception while adding in consumer.

    I have producer portlet and trying to add the "Remote Producer Handle" in Consumer Portal Admin console.while adding this,I am gettign the following error. com.bea.wsrp.consumer.management.producer.ProducerManagerException: edu/emory/mathcs/backport/

  • Slow Loading of Internet Pages

    I am new to Mac's. Just bout my MacBook Pro on Monday. So, far I like it a lot, but it seems to take forever for internet pages to load. I checked my download and upload speeds on DSLreports.com and it said I had 5 meg and .75 meg, respectively. Why

  • IPhoto pictures appear grainy

    I am new to this forum and am in no way an expert on computers or photography- so excuse any stupidity in my questions. All photos that I have uploaded to iPhoto appear grainy, blurry and appear to have problems with highlights and just appear very b

  • Use checkbox to select rows in a table

    Is it possible to use a checkbox on the first column of a table as row selection control? Just like most of the web email client (Yahoo, Hotmail...). Thanks, Samson Fu