Creating SOLMAN suppport message from EP 7.0

Hi all,
We are in the support phase of a project.The support is handled by the solution manager.The suport messages are raised in SOLMAN.From ECC users are able to create a solman message(standard functionality ).Client wants such type of functionality from portal (EP7.0)also.They need a provision for the users to create a SOLMAN message from EP.
Is there any standard solution from SAP for this scenario.
Please shed some light on this.
Thank You,
Regards,
Rajesh

Hello Rajesh,
Please use the following link.
Setting up a Support Desk Scenario
http://help.sap.com/saphelp_nw04s/helpdata/en/13/fed004da9e1f4282d884a57138c8d6/frameset.htm
Hope it helps.
Cheers,
Satish.

Similar Messages

  • When I create a text message from my contact on my iphone 5, the contacts mobile number appears and not there name.  But when they respond to my text, is shows up as a new text message with there name.  How do I fix this?

    When I create a text message from my contact on my iphone 5, the contacts mobile number appears and not there name.  But when they respond to my text, is shows up as a new text message with there name.  How do I fix this?

    Double click the home button and swipe up the messages app to stop it, then open the app again. This pretty much completely stops the process and freshly opens it again, resolving problems at times. I have had this happen before as well on my iPad, I get a banner, check messages, and nothing new is there.
    If that doesn't work, close the app like suggested above, but then restart the phone by holding down the home and lock button for 10-15 seconds until the apple logo appears.

  • Create Support Message from external system

    HI experts,
    I would like to change the Create Support Message screen(Menu->Help->Create Support Message) and add three fields namely: Category, Subject and Solution Number because currently these fields are not populated in the Service desk if I create message in this way unlike in using NOTIF_CREATE tcode where there are selection fields for these.
    Also, I'm creating the support message from an external SAP system and the messsage is sent to the Solution Manager system. The NOTIF_CREATE tcode does not exist in the external system as well as the whole package DSWP.
    Please let me know you rthoughts on this.
    Thanks
    Eric

    Hi guys,
    Thanks for your answers... But is it possible to call transaction NOTIF_CREATE from an external system?
    I have done something already so that those 3 fields will be automatically populated for a message sent from an external system.
    I changed the screen and called FM BAPI_NOTIFICATION_CREATE(a remote enabled FM which is the one being used by transaction NOTIF_CREATE to create a message) inside FM BCOS_SEND_MSG.
    I populated the category, subject and solution in the FM export parameters as well as the solution number in the sap data table. I put a destination also..
    This FM calls another FM DNO_OW_CREATE_NOTIFICATION which is the one being used from the external system but do not cater the functionality to send the 3 fields that we need.
    As you will notice, there are lots of standard objects that I've changed. =)
    My problem now is that the system data sent is the same with the system data if you create the message using NOTIF_CREATE. Some system that were sent when a message is sent from an external system is missing but at least the sap system and client ID is sent. There is no external reference number also. But hopefullly, the users will accept it. Can't find any other solution to this.
    Thanks,
    Eric

  • Create a Support Desk Message from WEB

    Hi All,
    I am trying to create a web message from the web.
    I am trying the following link:
    http://dodsm.domain.com:8081/sap/bc/bsp/sap/dswp_create_msg?sap-client=<001>
    I get a login screen into the web application server(webas). when i enter a valid user of the webas, it fails with the folowing message.
    Logon failed
    What has happened?
    Call of URL http://dodsm.domain.com:8081/sap/bc/bsp/sap/dswp_create_msg terminated due to error in logon data.
    Note
    Logon performed in system SOL.
    Logon performed for client <00, user j2ee_admin, and language EN.
    Error Code: ICF-LE-http-c:<00-l:E-T:231-C:3-U:5-P:5-L:7
    HTTP 401 - Unauthorized
    Your SAP Internet Communication Framework Team
    Please help. in the above i could see that i have entered the client as <001> where as the error says it is seeing only <00
    any authorisation i am missing?

    hi,
    I want to place a button in the web template of bi 7, so that when the user clicks on the button i want to call bsp appliaction which creates the support desk ticket. so that the user can fill/edit and submit his support request.
    Regards,
    Shamila

  • Fields missing in Support Message from CRMD_ORDER

    Hi All,
    when we create a Support Message from transaction notif_create, there some fields like
    component, project and solution
    but when we create the same support message from transaction crmd_order, i could not find those fields.
    Please suggest
    Regards,
    Pradeep L

    Hi Prakhar,
    Is there any work around where we can configure such these fields would be visible in the transaction CRMD_ORDER.
    The issue we are facing is:
    Standard Transaction Type: SLFN is being used for another project in the same system
    Now i have created another Transaction Type: ZSLF with customized status, action and date profile.
    Now we cannot use notif_create as it will pick up SLFN and we cannot change it to ZSLF as the other project is using it
    Please suggest
    Regards,
    Pradeep L

  • Creating support desk messge from ECC "Help"

    Hi Experts,
    I am working in SP20 EHP1 of Sol Man.
    Kindly provide the configurations  & authorizations to be done in ECC system & in Sol Man system to create the support message from ECC "Help" menu.
    I have created the ZLFN transaction type (copy of SLFN). When i create the support message in ECC help menu, i need to create the support desk message with "ZLFN" transaction type.
    Your valuable inputs required.
    Regards
    Senthil

    Hi Naveen,
    Thanks for the SAP note.  Can you explain point no:5?
    1. The client was not completely created by the copy of Client 001
        I need to check this with basis team
    2. The BCOS_CUST table was not maintained correctly
        In BCOS_CUST (In satellite System), i have maintained the following:
        OSS_MSG  W SM_DM3CLNT110_BACK CUST620 1.0
    3. Missing authorizations for message creation (correct: roles copied from SAP_SV_FDB_NOTIF_BC_CREATE and SAP_SOL_SERVTRANS_CREATE or SAP_SUPPDESK_CREATE)
    I am having SAP_ALL authorization in Satellite system. Is these roles to be assigned in Sol Man also?
    4. incorrect action profile assigned for the message type SLF1 (correct: SMSD_ABA_MLDG_SERVICEVORGANG or SLFN0001_STANDARD_DNO)
    For SLF1, i have assigned the action profile :SLFN0001_STANDARD_DNO. But inside this action profile, i have changed the values like PROCESS_TYPE to "ZLFN" & PARTNER_FCT_CREATOR to "ZLFN0002".
    5. Number ranges are not assigned correctly
    Can you explain this? For SLF1  & ZLFN , i have maintained "Internal" number ranges.
    6. The logical system is not defined
    Logical system for Sol Man & Satellite system  is created.
    7. Modification of the standard settings of the message type SLF1.
    I have changed the Text for Priority in SLF1.

  • Creating a new message in adapter module

    Hello,
    I already posted the question in this [Thread|Sending Adapter Module to split messages;, but I now create this new topic so you can get points for your answer
    Jan from this thread wrote "I know how to send a new message using a new instance of the Module Processor and using ModuleProcessor.process()" and I'm now searching for a code example how to create a new message from within an adapter module. I think it must be something like [this|http://help.sap.com/saphelp_srm40/helpdata/en/8d/6ad6409ff68631e10000000a1550b0/frameset.htm].
    Regards
    Markus

    Hi Sippy,
    First of all we need to configure the systems. So that we can transfer data from Outbound system to Inbound system.
    Configure an Outbound Process that uses Message Control
    Step 1: Create a new Message Type
    TCode: We 81
    Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
    Step 2: link the IDOC type to the Message Type
    TCode: We 82
    Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
    Step 3: Create a new Process Code
    TCode: We 41
    Path: From the Area menu of EDI, choose Control,Outbound Process COde
    Step 4: Create or Change a Partner Profile
    TCode: We 41
    Path: From the Area menu of EDI, choose IDOC,Partner Profile
    Configure an Outbound Process for Stand-Alone Programs.
    1. Create a new message type
    2. Link the IDOC type to the Message Type
    3. Add the message to the ALE Distribution Model(use BD 64)
    4. Create or change the Partner Profile
    I think this will be helpful for you.
    Reward points if useful.
    Cheers,
    Swamy Kunche

  • Creating Support Messages from Satellite System without SolMan user account

    Hi
    We are having some problems with users "creating support message" from our ECC system  to SolMan, if the user does not have a user account in Solution Manager.
    It is not correct, that users from Satellite systems can create support messages from these systems, without the user having an account in Solution Manager? And that the user is identified by the business partner for the user, that must exist in the Solution Manager system ?
    We have set up the RFC for the supportmessages between SolMan and the ECC system as trusted RFC, with the "Current user" as the user, but how should this be set up, if the user does not have an account in the Solution Manager system. If we enter a user with the right authorizations in the RFC, will the messages that come through not just appear as created by that user, instead of the ECC user and corresponding business partner ?
    Regards
    Lars

    Hi,
    you can use the use the user for the RFC-Connection in that case. I have customizied a similar scenario. In my scenario the System from which the message was created, is the business partner (SOLD-TO-PARTY). For that you have to create a communication user (i.e SOLMAN<SYSID>). In TA SM59 in the satellite-system you assign this user for the connection. (Don't forget to assign the user to the role "SAP_SV_FDB_NOTIF_BC_ADMIN"). Now, it schould be possible to create messages from the satellite system to the solution manager. Additionally you should create business-partner for each user of the satellite system, by using TA DSWP>EDIT>CREATE BUSINESS PARTNER.
    With this TA, it is easy to create BP for each satellite system.
    Best regards
    Marc

  • Unable to find the sended message from create support message in solman.

    Hello everybody,
    I had installed the Solution manager and IDES server.
    I have configure the Maintenance Optimizer, Now I am able to send the
    support message from the IDES.
    But Now where to find or serach the message in solution manager ?
    or need to be configure service desk?
    Please suggest me step by step  configuration to check the sended message.
    Thanks

    hi
    >
    ganesh borase wrote:
    > I have configure the Maintenance Optimizer, Now I am able to send the
    > support message from the IDES.
    > Thanks
    sorry nt clear from your above statement, you configured maintenance optimzer for download supprot packages. do you want to configure support messages functiionality?
    Can you please clarify your requirement?
    Thanks,
    Jansi

  • Ibase/Component issue while creating a message from satillite system

    Hi experts,
    we have implemented the service desk functionality in solution manager system.
    User is able to create message in solution manager directly.
    While creating message from a satellite system IBASE/component fields are filled with incorrect values.
    Because of this user unable to create message from satillite system.
    Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
    Thank you in advance,
    Babu

    Hi  Babu,
    For Creating messages in SOLMAN make sure that in T code SM30  under the table BCOS_CUST data is maitained
    OSS_MSG     W     NONE     CUST620     1.0
    First your should make your solman ready for posting issues within.
    Then connect it to ECC systems and try posting issues there.
    Do not user Tcode NOTIF_CREATE for posting issues  always use HELP- Create Support message.
    Thanks
    Nand

  • Problem in create message from satelite system

    Hello! I have SAp Solution Manager 4.0 stack 15
    I have configurate trusted connections between my solman system and satekite system. I successfully generate iBase, create business partners. When I create message from my sap user , message created without problem. But when I create message from the test user, system create message with error:
    Message 8000000339 created in Support Desk System with following error: User SDTEST does not exist
    Message no. BCOS002

    There is a check if the user who creates the message in the satellite system does exist in Solution Manager.
    Try TX: DNO_CUST04 -> NO_USER_CHECK = X
    /cheers

  • How do I get rid of the auto signature "sent from my iPhone" when I create a new message?

    how do I get rid of the auto signature "sent from my iPhone" when I create a new message?

    Settings -> Mail -> Signature and edit it to whatever you'd like.

  • I group messaged from my ipad and this has screwed up the way my messages are reveived by my friends (it creates new threads in their phones with my email in place of my contact name) I've stopped messaging from my ipad but the problem remains. Any help?

    I have an iPhone 4S and use the group texting feature ALL THE TIME. I recently updated my iPad to the latest software and made the colossal mistake of continuing my group messaging from my iPad while connected to wifi. Doing this has successfully screwed but every group text thread I am in, to the point where its very hard for those involved in the thread to keep up. When I initially messaged those I was already engaged in text threads with it created a new thread in their phones replacing my name in their phones with my email. At first this was not a big deal but ever since then the people I am messaging have become increasingly frustrated with how my messages come through. If I am messaged in a group text and respond to it, sometimes when I respond it will create an entirely different thread in my recipients phones. So at that point they have to switch threads in order to read what I wrote. The new thread that my phone creates will send the message under my email not my name (related to the contact they have me saved as in their phones). The worst part about it is that there seems to be no rhyme or reason to why or when my phone will send the message as normal or under my email like it did with my iPad. I haven’t messaged from my iPad since these problems immediately began a month ago but the issues still continue. I have tried everything to get this to stop, I’ve turned off my wifi, I’ve had my friends delete the threads that my messages create in their phones. I’ve had them delete my email in their contact lists and nothing has worked. Can you help me? Any info you could provide would be greatly appreciated.
    Note: My phone message no different whatsoever. All the threads have remained the same. The issue is what it is doing to the people that I am messaging.
        Best Regards
             Rick Mulhern
    Message was edited by: Rickapplehelp19

    I have this identical problem.  For a while my group texts didnt show up on my ipad.  Then one day they did, maybe everyone in the group started using the same os version or something.  Ever since my first reply to the group there have been complaints of multiple threads.  I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time)  Everyone in the group has deleted the thread, we've all toggled imessage on/off etc.  There still hasn't been a solution.
    Any help would be appreciated.
    Thanks

  • Can you copy/paste files from the Finder to Mail in Lion, or drag them onto the Mail icon in the Dock to create a new message and attach the files to it?

    Message title says it: Can you copy/paste files from the Finder to Mail in Lion, or drag them onto the Mail icon in the Dock to create a new message and attach the files to it?
    I can't find anything in the Knowledge Base that says these two options no longer work or still do.
    I do not have a system capable of running Lion, but I need to know the answer nonetheless.

    Gee, I don't know: "paste attachments mail Lion"? ;-)
    One further question, if I may: in Panther (which is where I've aggregated nearly 7 years of mail), if you copy more than one file in the Finder, switch to Mail, and paste the files into a new message, only the file names paste in. If you copy one file and paste it into a Mail message, you get the file, not just the name. Is that still true, or has that (IMHO) bug been fixed since 10.3.9?

  • Service Desk - Create Message from Satellite System

    Hi Guru,
    I'm learning SAP Solution manager service desk tools (on EHP1 SP22). I've managed to activate it and I can create the message from satellite system (with SLFN as default transaction type). Is it possible to change default of transaction type while creating support message from satellite system (e.g. using ZSLF, etc)?
    Appreciate for your input.
    Thanks and Regards,
    Yan

    Yes. It is very much possible.
    Use transaction - SPPFCADM
    select the row - DNO_NOTIF
    click on - Define action profile and action
    Select the action profile - SLFN0001_STANDARD_DNO
    Select the action - SLFN0001_STANDARD_DNO_CRM
    in processessing type, change the container value to ZSFN.
    Hope this will be helpful.
    Regards
    K.Kumar

Maybe you are looking for