Creating Statement of Cash Flows using FSGs and ADI

Has anyone tried to create a SCF in FSG's using ADI for customizations and macros? I am realizing that I can automate a few things for the client like some of the variances needed from B/S accounts.For the most part, it seems thatI cannot create a report directly from FSG's. I have had to create supporting reports and with macros I have tried to automate as much as possible to create the SCF from the supporting reports. The accountants will still have a few manual things to do but it should be much faster than initially. Is this the only way with FSG's or has someone gotten much closer to the real McCoy?

Gordon,
Yes, ik did look at the Cash Flow report.
What I need is similar to the Comparison Report, where you will take 2 Balance Sheets of 2 years and compare them. But I need to take this further, by then taking the Diufference between these 2 Balance Sheets and creating the 'Statement of Cash Flows'. This will not use all theBalance Sheet accounts, only certain ones.
Thanks for your help.
Marli

Similar Messages

Statement of Cash Flows

Hi Experts,
Do you know of a Report in SBO that can act as the 'Statement of Cash Flows' that certain businesses need for their Lendors?
This was explained to me as taking 2 years balance sheets and getting he differential on some of these Accounts (Operating, Investing and Financing). Then the 'Statement of Cash Flow' is created from that information.
Quick Books have this functionality.
Any help will be appreciated. Thought I'll ask before beginning on a Crystal or XL Reporter Report.
Marli

Gordon,
Yes, ik did look at the Cash Flow report.
What I need is similar to the Comparison Report, where you will take 2 Balance Sheets of 2 years and compare them. But I need to take this further, by then taking the Diufference between these 2 Balance Sheets and creating the 'Statement of Cash Flows'. This will not use all theBalance Sheet accounts, only certain ones.
Thanks for your help.
Marli

Statement of Cash Flow for Non-USA localization

As you may already concern that Statement of Cash Flow (not Cash Flow) is one of mandatory financial report should be provided both internally and externally. This would be contradictory with the fact that only USA localization supports such report via XL Reporter (provided using XL Reporter sample report). It would be necessary for SAP to unlock this function so that other localization can benefit these by allowing setting of 1 field (yes, only one) in the G/L Account Details.
And will be excellent if this can be accomplished shortly for SAP B1 2005 via the next enhancement package.
Thanks,
Dody

HI,
There is one Standard report S_ALR_87012271 for Cash flow Statement Direct method. We can use this for cash flow direct method reporting.
If we want to use our own report then create report and form
regards
priya

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

Hello jive
I am playing it back in the slideshow editor/setting up part of
programme where you determine photos/video to be included gaps between
slides, music to play etc This goes through each phot and when comes
to a video the background sound doesnt play, I am using windows 7 and
elements 10.
regards gins51

Developer-Online: Create a Digg login style using jQuery and CSS

Create a Digg login style using jQuery and CSS
Hello Friend, today We'll see how to create a Digg Login panel using only CSS3 and a bit of jQuery script. You'll see how is simple present a login feature using a modal window creates by js. You'll find the .ZIP tutorial visiting: http://www.beatfly.com/download.php
Tags: tips & tricks | JS
Author: patrizio Quatrini
Posted: 2010-02-04 10:57:48
Brought to you by: Developer-Online

Thanks Leonard
On the surface that looks a mighty powerful product that probably goes far beyond what we require. Looking at the system requirements, it seems that some specific Application Servers are needed (is this correct?), which we won't have. Am I correct in thinking this is a modular based product, in that I buy a base product (being LiveCycle ES ... not sure what this product does on it's own) and then add a module such as PDF Generator to it?
It's difficult to glean from the product web site exactly what this product is all about but my gut feel is it'll be a few steps beyond what we need to achieve. I might be wrong, so feel free to pull me up there but it seems this is along the lines of a total back-end Adobe solution.
If you have any other suggestions I'd be grateful, otherwise I may need to continue down the "clunky yet serviceable" HTML to PDF route
Adrian

Modify Transition element in work flow using for and not attributes to restrict access

Hi,
I have TFS 2013 for my premises and I am working on changing the work flow for TFS work item. I have created a work item as per requirement and it has 3 states
Active, In Review and Closed in work flow. When developer creates a work item it is in Active state and later it is sent to In Review and then to close after successful review.
My question is I want development team to be restricted to move the work item to Close state. At present when developer creates a new work item they see Active state. At this point they can not see any other states in the work item. Later they
fill the details and after checkin they will put that work item to In Review state. At this point they can see Active and In Review states. When they save this work item and modify it again they see Close state as well. I want to design the Transition element
in work flow in such a way then developers should not be able to see the Close state at all in a work item assigned to them. Only reviewer should be able to transit the work item from In Review to Close.
I checked the for and not attributes in the transition element but I have no idea about correct syntax I should use to enforce the restriction. I would also like to mention here that I have no separate groups defined in my TFS server. Every
one is a part of contributor's group. There is no specific group of reviewers and one developer reviews the code of another. I want to design the work flow in such a way that the developer who creates (or gets assigned) the work item should
not be able to put their own work item in Close state but they should be able to close another developer's work item if that work item has his name in the reviewer's box.
I have tried to simplify my question by elaborating it hope it is not complex to understand. Let me know if you want further clarification on this.
Regards, Premal Acharya

Hi Premal,
For your scenario, seems the "for" and "not" attributes not are unavailable to make it happens. Because of the developers not in groups, and the same type of work items can be assigned to all the developers hence the attributes cannot
be allow and deny users in the groups concurrently. Please check the
page for more information about transition xml element.
Based on your situation, you can separate the development group and test group. Then you can only allow test group to change the state.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Create a new Buffered Image using Raster and ColorModel

Sorry , I crosspost this message,because no one reply.
Recently,I write a programme combining C++ and Java .
The C++ part create a array containing image data in form of BI_RGB and biBitCount==32.
The java part create a image using Raster and ColorModel like this:
   static int[] data ;
   DataBuffer db = new DataBufferInt(data, data.length);
   WritableRaster wr =Raster.createPackedRaster(db, 1024,768, 32, null);
   ColorModel cm = new DirectColorModel(32,0xff0000,0x00ff00,0x0000ff);
   img = new BufferedImage(cm, wr, false, null);But it doesn't work .
it report this:
Exception in thread "main" java.lang.IllegalArgumentException: Raster sun.awt.im
age.SunWritableRaster@dff3a2 is incompatible with ColorModel DirectColorModel: r
mask=ff0000 gmask=ff00 bmask=ff amask=0
at java.awt.image.BufferedImage.<init>(BufferedImage.java:549)
at monitor.test.Perform2.main(Perform2.java:39)

hey epico
compiles & runs 4 me
see javadocs for SinglePixelPackedSampleModel
import java.awt.image.*;
public class Tester {
DataBuffer db;
WritableRaster wr;
ColorModel cm;
BufferedImage im;
int[] data;
int[] masks;
int w = 768;
int h = 576;
public Tester() {
    data = new int[768*576];
    for (int i = 0;i < w*h ;i++ ) {
      data[i] = 0;
    masks = new int[3];
    masks[0] = 0xff0000;
    masks[1] = 0x00ff00;
    masks[2] = 0x0000ff;
    db = new DataBufferInt(data,data.length);
    SinglePixelPackedSampleModel sm = new SinglePixelPackedSampleModel(DataBuffer.TYPE_INT,w,h,masks);
    cm = new DirectColorModel(32,0xff0000,0x00ff00,0x0000ff);
    wr = Raster.createWritableRaster(sm,db,null);
    im = new BufferedImage(cm,wr,false,null);
public static void main(String[] args) {
    Tester tester1 = new Tester();
}

Creating JNI DLL on WinXP using MinGW and GCC

Ohh man, I spent entire day fighting with "UnsatisfiedLinkError "while trying to cal my native method. After reading all the posts with similar problems, and checking for every little thing that was suggested I figured it out. So I'm reposting the solution here since no one else had suggested this.
The solution to my problem was that g++/gcc compiler needed an option "-Wl,--add-stdcall-alias". This was the killer. I had the "-shared", but it wouldn't link without the "-Wl,--add-stdcall-alias" option!!!
As a summary, while its fresh in my mind, here are the trouble shooting steps I used:
1) Check package names and the generated .h file using javah. I checked and rechecked the names, even created simpler static void method to try and get it to link.
2) Make sure to use the "jobject" parameter for dynamic methods and "jclass" for static methods in the signature as second argument.
3) That method name starts with "Java_" and I stress the CAPITAL "J", can not be lowercase. Although if you are using javah, that should not be the problem, since javah can not ommit this kind of detail. The only thing that you need to check for is that if you change method from dynamic to static, and don't rerun the javah, or javah doesn't replace the previous file. So make sure you restart clean and that javah regenerated the file with "jclass" or "jobject" whichever is the case.
4) Used the "java -verbose:jni" debug flag to see my native method loaded. In my case when it wasn't working I couldn't see the method load, but there were no error messages from "System.loadLibrary" or from the verbose output. Only the UnsatisfiedLinkError. Frustrating. After the fix it loads perfectly:
[Dynamic-linking native method org.jnetpcap.Pcap.openVoid ... JNI]5) I used "nm" found at "c:/MinGW/bin/nm.exe" to dump the symbol table, and I could see all my methods, with the appropriate named marked as text (T) flag. They were not being loaded when viewed using "java -verbose:jni" though.
6) I put "extern "C" {}" around all my JNI C++ methods.
7) Tried a gazilion other gcc options, posted in various messages, none worked.
8) Finally came accross the "-Wl,--add-stdcall-alias" flag which fixed it.
Here is a portion of my Makefile for reference:
$(LINK_TARGET) : $(OBJS)
     g++ \
          -shared \
          -Wl,--add-stdcall-alias \
          -o $@ $^ \
          $(LIBDIRS) $(LIBS)LIBDIR and LIBS point to a single external library dependency.
My IDE environment is Eclipse 3.2, but I run everything from Makefiles as external programs.
I wish this was documented somewhere, would have saved me an entire day of troubleshooting.
Cheers,
mark...
Message was edited by:
voytechs - added CODE tags

Glad my post helped out at least a few people.
Believe it or not, I'm in the same boat now on Linux.
Atleast I know its the name mangling problem again. I
see a few symbols unmangled with nm, but most are,
and those are then one's JNI is complaining about
with UnsatisfiedLinkError.
So now I'm going through various post related to
linux and trying to find the same type of flag. The
"alias" flag doesn't work with RH4 g++ version
4.0.2.You should not need a flag on Linux. A typical compile for me on my Linux box is:
gcc -shared -o libjnitest.so -I/usr/java/jdk1.6.0_01/include -I/usr/java/jdk1.6.0_01/include/linux jnitest.c>
Window builds perfectly fine, but now I'm creating a
new platform target. Everything compiles and creates
the shared library, just can't get JNI to be happy.
BTW, my project: http://jnetpcap.sf.net
Ah. You have .cpp extensions on your filenames. Are you using gcc or g++ to compile? If you don't use g++, you can get errors such as:
undefined symbol: __gxx_personality_v0
Jim S.

Problem in Creating new row & inserting data using CreateInsert and Commit

Hello All,
I have created a page there are few input text and i want to insert the data into a database table. I have created an Application Module I am using CreateInsert and Commit operation but there is one problem.
At first it created a row in database after that it is not creating the new row instead it is updating the same row with the new values.
In bindings of my jspx page I have created two binding for action (1) CreateInsert for the VO of that Application Module (2) Commit operation of that Application Module.
Here is the code snippet of my application:
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("CreateInsert");
Object result = operationBinding.execute();
*if (!operationBinding.getErrors().isEmpty()) {*
return null;
OperationBinding operationBinding1 = bindings.getOperationBinding("Commit");
Object result1 = operationBinding1.execute();
*if (!operationBinding1.getErrors().isEmpty()) {*
return null;
I have tried using Execute+Commit and Insert+Commit case also in every case it is updating the same row and not inserting a new row.
Is there anything I am missing?
Please Help.

hi user,
i dono. why are trying with codes. adf provides zero lines codes.
a wonderful drag and drop functionality provide by the framework.
while double click the button the codes are registered in your bean
    public String cb6_action() {
        BindingContainer bindings = getBindings();
        OperationBinding operationBinding = bindings.getOperationBinding("CreateInsert");
        Object result = operationBinding.execute();
        if (!operationBinding.getErrors().isEmpty()) {
            return null;
        return null;
    public String cb8_action() {
        BindingContainer bindings = getBindings();
        OperationBinding operationBinding = bindings.getOperationBinding("Commit");
        Object result = operationBinding.execute();
        if (!operationBinding.getErrors().isEmpty()) {
            return null;
        return null;
    public String cb7_action() {
        BindingContainer bindings = getBindings();
        OperationBinding operationBinding = bindings.getOperationBinding("Delete");
        Object result = operationBinding.execute();
        if (!operationBinding.getErrors().isEmpty()) {
            return null;
        return null;
    public String cb14_action() {
        BindingContainer bindings = getBindings();
        OperationBinding operationBinding =
            bindings.getOperationBinding("Delete4");   // some different here. after deleting usually do commit
        OperationBinding operationBinding1 =
            bindings.getOperationBinding("Commit");    // so here commit operation.
        Object result = operationBinding.execute();
        Object result1 = operationBinding1.execute();
        if (!operationBinding.getErrors().isEmpty()) {
            return null;
        if (!operationBinding1.getErrors().isEmpty()) {
            //add error handling here
            return null;
        return null;
    }if am not understud correctly. please some more explanation need.

Cash flow start date and first posting date in REFX-RECN contract

Hi,
While reviewing old contracts, I have noticed that in contracts where first posting date is mentioned, the cash flow start date is not editable in contract change screen. In contracts where first posting date is not mentioned, the cash flow start date is editable in the change screen.
Is this standard system behaviour? Because i have read in the forum that cash flow start date is not editable after first posting of the conditions.
I tried to change the field status of cash flow start date through RECACUST, but despite keeping the field status as display, the cash flow start date remains editable.
Please help on how to make the field status not editable.
sadhana

Hi Sidhharth,
Thanks a lot for your immediate reply.
I still have one query. You have written that
Where First posting date is not updated it indicates that posting of the contract is yet to be done,not a single posting has been performed hence Cashflow date is editable.
This means first posting date is always filled up after condition is posted. but in our system i find that the date is blank and greyed out even after the 1st posting.
Could it be due to having several conditions in the contract - some with one time posting, some with monthly posting? eg.most of our contracts have atleast two contions - one for deposit which is one time payment, one for rent. the first posting date is updated in individual condition for rent in conditions tab but first posting date in terms tab is blank. But even in single condition contracts, the first posting date is not getting updated in term tab (the field gets greyout out once contract is activated)
Thanks once again.
Sadhana.

Creating an Order Processing System Using XML and JavaBean/EJB

Hi,
I'm looking to design a solution for the following problem:
A distributor creates a purchase order from a home grown system. This purchase order is sent to the company as a flat text file. This file must then be validated for both syntax and data values and then processed by their ERP system running on an AS/400.
The solution I would like to provide is to place the data from this text file into an XML file and then create a system composed of server side components (either Java Beans or Enterprise Java Beans) that would parse the information and call the back end ERP processes (using business methods from within the beans). I have already developed a web app that processes orders using JSP and Java Beans. In this case however, the order will never be seen by a human unless it fails validation. I figured using XML to do this would not only be good for this part but also improve the e-commerce side as well. My only question is how to submit an XML document to a bean for processing without user intervention. Any information you can give me on this or even to point me in the right direction would be greatly appreciated. Thank you for your time.

Hello,
Thank you for responding to my question. I have several books here on XML but have not gotten very far in them as of yet. I understand how to create an XML document and a DTD, but I guess I haven't gotten far enough to understand how "submit" per say an XML page like you would an HTML form and then proceed to retrieve the data from the request parameters. I will research this further.

How to process screen flow using PAPI and WAPI

Dear all,
I need to process the screen flow from PAPI or WAPI.
I want to know which API(PAPI or WAPI) i should use and how to achieve that.
as far as i know, there is two part in WAPI. (external to work portal, throungh the html process API, and internal to the work Portal, through the URLForAction java class).
where can i get documentation for (internal to the work Portal, through the URLForAction java class)?
With Regards,
Wai Phyo

Hi Bhaskar,
If you zip probably the size would come less which may increase his performance a little. But I feel SAP also dont recommend this much load with PI.
If I am in his shoes then I will do a simple FTP without using PI itself. Else will look into other options. Thats my two cents.
Hope this alexs blog will give an idea to Sai:
/people/alessandro.guarneri/blog/2007/02/21/sap-xi-acting-as-a-huge-file-mover
Regards,
---Satish
Edited by: Satish Reddy on Jul 20, 2011 3:02 PM

Creating Deskband for Windows 8 using C++ and its communication with C++/Qt application

I've already found described way of creating deskbands here -- http://msdn.microsoft.com/en-us/library/windows/desktop/cc144099%28v=vs.85%29.aspx and respective sources on SDK like https://github.com/theonlylawislove/WindowsSDK7-Samples/tree/e8fe83b043727e71f5179da11fc6228475e7973c/winui/shell/shellextensibility/deskbands
But can't find any simple and straight article on how to use it for example in/from Qt-written application.
Can someone recommend any resource where I can find way to implement own deskband for own application, please.
Thanks.

There is no API for creating or showing menus on desk bands written by others, with the exception that a task bar button representing an application
written by yourself, in that case you can use the Windows 7 Jump lists API (right click menu) or WM_SYSCOMMAND (shift+right click menu) to control the context menu of your own application. How other
deskbands handle menus are completely up to their authors.
A deskband is an in-process COM server which means you must build a 64 bit version if you want to use it in 64 bit Windows Explorer.
Visual C++ MVP

I have a poster sent to me created in illustrator and I have photoshop cs2. I used the same dimensions from the original to create the poster in cs2. After creating the poster in cs2 using images and texts from the original poster, I printed it off and

So there is a lot of white space at the top and bottom of the page when I print off poster. When I see the poster on the canvas on cs2 it looks how I want it to! I am confused! Help pls. Also I am new to photoshop.
When I sent the finished poster to the person I needed to send it to, it wasn't printing out how we wanted on A4.

What system? What printer? What print settings? Most of that has nothing to do with teh Adobe apps, but your printer's capabilities and nobody can advise without that info.
Mylenium

GL - FSG for Cash Flow

Hi,
I needed your help in defining cash-flow. I have rowset ready with account ranges but i am having difficulties defining column set for it.
How to get Beginning Cash?
Thanks in advance
Jim

Hi Jim
You can't define a cash-flow using FSG, a cash-flow means the money you will receive and pay in FUTURE periods weeks, months,gl periods. FSG uses actual and budget amounts, but not future amounts. You can define a cash-flow in CM module, it's tables will be populated with data extracted from AP , AR for example.
Hope been helpfull
Renan
[email protected]

Creating Statement of Cash Flows using FSGs and ADI

Similar Messages

Maybe you are looking for