Creating the outline and Loading data for TBC in 11.1.2.2
Hi all, feelin kinda dumb here because this task really should not be as difficult as it seems.
I am trying to Load the TBC application in 11.1.2.2 Essbase. I have followed the documentation to
1. Install EIS
2. create the metadata repository and load the xml file provided
I now need to create the essbase cube from this metadata repository, I cannot seem to find any real steps as to how to do this, everything I found was pertaining to creating the repository. Can anyone help define what needs to be done and what steps I need to take, I am new to EIS and Studio so the simpler the better :)
thanx
thanx, this did give me a better understanding of essbase studio, thank you. It did not help so much as getting the structure and data from the repository into essbase. For that from what I understand I can import models from EIS (where I loaded the TBC) one. In doing this I get an error saying that it cannot find any models (which I know are there because I can look at them in EIS. Unfortunately, looking over other posts, I installed Studio on a 64 bit server, which may be the issue I am facing (I hope)
I am going to try and reinstall studio on a 32 bit platform and try the import again.
Similar Messages
-
How to create the Query and T Code for Special Reports
Dear Freinds,
Could any one advise the process to create the Query and the T code for some special combination of reports. Where can we find the documentation on this if that exists?
Thanks for the help.
Regards
Moderator: Please, search SDN - you'll find the answersHI
Go to Tools -->ABAP WorkBench -->Utilities --> SQVI QuickViewer ( Query Builder)
Go to Tools -->ABAP WorkBench -->Utilities -->SAP Query -->SQ01,SQ02,SQ03
first create Infosets in SQ02, Assign Infoset to UserGroups in SQ03 and create a Query in SQ01.
Create a Transaction Code in SE93.
regards
Venkat -
Creating scenario dimension and loading data
Hi all,
We have two fact tables. The first one is sales that include quantity and subtotal columns. The other one is budget that include quantity and subtotal. We are working with hyperion essbase 9.3. First of all we are creating two model. For sales model we create 7 dimensions (product, chanell, time, company, currency, customer, account) and 3 attribute dimension and for budget model we create 4 dimensions (account,company,customer,product) in metaoutline. And we create 2 application for each metaoutline. We plan to report sales vs budget but we don't know how to join sales and budget data. Everybody recommends scenario dimension. we don't know how to create sceneraio dimension and in which application Essbase integration or Essbase administration services.
thank you.I agree with Cameron. The best way is to put them into one cube. Since you are using a SQL source you can manulate it to have your budget load to the same time level as your actuals. For example suppose you load actuals daily and Budget is Monthly. for consistancy, you could load the budget data into the 15th day of the month. At the Monthly level where you would compare budget to actual, the numbers will be correct. Loading into dummy members for the dimensions that don't exist for budget is a common practice when trying to sync up data. If you really want to make it easy, you could union a view to make it look like you have a single fact table (based on the combo of budget and actual) and have a single metadata outline to load everything. I prefer having two because of different load requirements, but this is an option.
If you don't want to go this way, the next option is to partition your budget data into the actuals cube. this would keep them seperate but allow you to see them togeter. Between the two option, I prefer the single cube approach better -
How to add a new field in the cube and load data
Hi,
The requirement is
We have ZLOGISTICS cube , the data souce of this filed has REFDCONR-reference dcument number filed . We have to create a new field in cube load data and get this new filed into the report also.
Please any one can help me with the step by step process of how to do?
How to get the data into BW and into the report.Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico -
How to create the IView and Roles ,User for WebdynPro Application in Portal
Hi,
I have one simple webdynpro application. i want to create the user,Role and Iview for my webdynpro application in the Portal . after that i need to assign the roles to the user and i want to see the different output for each user depends upon the Role.
Can anyone give me Tutorial page(PDF) or Guide me How to do?
Thanks in Advance
Regards
RamkumarHello Ramkumar,
following please find the link to available documentation in SAP Help Portal:
http://help.sap.com/saphelp_nw70/helpdata/en/42/fa080514793ee6e10000000a1553f7/frameset.htm.
Regards,
SAP AG
Gesine Raith -
Error while building outline and loading data
Hi,
I am getting errors while deploying cube from essbase studio.
My hierarchy is Branch->Account->MonthYear->Flag. Dimensions are Debit amount, credit amount.
Kindly advice me.
The error file is located on the server at: D:\Hyperion\products\Essbase\EssbaseStudio\Server\.\ess_japihome\data\FPP_94.FPP_94_05-12-10_16-23-01.err
\\Record #2 - Member name (09-2007) already used
1360 136010051332 09-2007 Y
\\Record #3 - Member name (09-2007) already used
0 158011007242 09-2007 N
\\Record #4 - Member name (09-2007) already used
5840 584011011887 09-2007 Y
\\Record #5 - Member name (09-2007) already used
1300 130010012120 09-2007 Y
Error: 3303;Y;Y 143 239 143 239 ;
Thanks in advance,
Best,
Veeranna Ronad.Hi Glenn,
Thanks for the reply. The hierarchy Branch->Account->MonthYear->Flag is always unique row in the base table. Flag is 'Y' or 'N'. I want Branchwise, accountwise, monthwise and flagwise consolidated amounts (debit and credit). Flag indicate that the transactions is from base branch or other.
The data in the base table is:
ACCOUNTNO | BRANCH | TRANSACTIONDATE | DEPOSITORWITHDRAWAL | Flag | AMOUNT
305080000033 | 7500 | 9/1/2007 | W | Y | 12000
425010053402 | 4250 | 9/1/2007 | D | Y | 1100
103011008900 | 5100 | 10/1/2007 | W | Y | 281
103011008900 | 5100 | 11/1/2007 | W | N | 500
161011000243 | 4500 | 12/1/2007 | D | Y | 145940
Hope your doubts are cleared.
Thanks,
Best,
Veeranna Ronad. -
Define the start and end dates of an assigned academic period in fee calc.
Define the start and end dates of an assigned academic period
Message no. HRPIQ00ACCOUNTING132
Diagnosis
The academic calendar assigned to the top organizational unit does not contain a start or end date for the academic period (academic year and session) assigned to fee calculation period Z000.
System Response
The system will skip fee calculation period Z000 and continue processing with the next fee calculation period.
Procedure
1. Check which academic calendar is assigned to the top organizational unit.
2. Check which academic period is assigned to fee calculation period Z000. You check this setting in Customizing for Campus Management in the IMG activity Assign Academic Years and Sessions to Fee Calculation Periods.
3. In this academic calendar, create the start and end dates of the relevant academic period using standard time limit 0100 (standard duration of academic period) or a corresponding user-defined time limit.
For more information, see
Define Top Organizational Unit
Define Mandatory Time Limits for Academic Calendar
please give me the needful information to solve this problem.
Regards
Arun RaiArun,
Have you looked in the Student Accounting Cookbook
http://www.sdn.sap.com/irj/scn/advancedsearch?query=studentaccountingcookbook on page 13?
Page 1-18 will help you setup the Oranizational unit, the academic calendar and the modules.
Bev beck -
MIN and MAX date for each range
Hi folks,
I´ve got the following problem:
Given a table
create table t as select 'AT' OM_LANDTEXT, '12345' OM,
to_date('01-JAN-2004', 'DD-MON-YYYY') datum from dual
union
select 'AT' OM, '12345' OM_LANDTEXT,
to_date('02-JAN-2004', 'DD-MON-YYYY') datum from dual
union
select 'AT' OM, '12345' OM_LANDTEXT,
to_date('03-JAN-2004', 'DD-MON-YYYY') datum from dual
union
select 'AT' OM, '12345' OM_LANDTEXT,
to_date('05-JAN-2004', 'DD-MON-YYYY') datum from dual
union
select 'AT' OM, '12345' OM_LANDTEXT,
to_date('06-JAN-2004', 'DD-MON-YYYY') datum from dual
union
select 'AT' OM, '12345' OM_LANDTEXT,
to_date('01-FEB-2004', 'DD-MON-YYYY') datum from dual
union
select 'AT' OM, '12345' OM_LANDTEXT,
to_date('02-FEB-2004', 'DD-MON-YYYY') datum from dual
union
select 'AT' OM, '12345' OM_LANDTEXT,
to_date('03-FEB-2004', 'DD-MON-YYYY') datum from dual;
SQL> select * from t;
OM OM DATUM
AT 12345 01-JAN-04
AT 12345 02-JAN-04
AT 12345 03-JAN-04
AT 12345 05-JAN-04
AT 12345 06-JAN-04
AT 12345 01-FEB-04
AT 12345 02-FEB-04
AT 12345 03-FEB-04
8 rows selected.I need to have the first and last date for om and om_landtext for each date range (where "date range" means a set of consecutive dates with no gaps).
So the ouput should be
OM OM_LANDTEXT DATVON DATBIS
AT 12345 01-JAN-04 03-JAN-04
AT 12345 05-JAN-04 06-JAN-04
AT 12345 01-FEB-04 03-FEB-04Any ideas...?
Thanks for your help!
Best regards,
Gerd
Message was edited by: Gerd
Sorry, I forgot to mention this should be done in pure SQL if possible.
[email protected]This is the plodding, methodical approach I've always taken, which leaves me somewhat in awe of Rod West's solution.
SELECT om_landtext,
om,
MIN(datum) AS min_datum,
MAX(datum) AS max_datum
FROM (
SELECT om_landtext,
om,
datum,
prev_datum,
COUNT(
CASE
WHEN prev_datum IS NULL THEN 'x'
WHEN prev_datum != datum-1 THEN 'x'
ELSE NULL
END
) OVER (PARTITION BY om_landtext, om ORDER BY datum) AS grp
FROM (
SELECT om_landtext,
om,
datum,
LAG(datum) OVER (PARTITION BY om_landtext, om ORDER BY datum) AS prev_datum
FROM t
GROUP BY
om_landtext,
om,
grp;null -
Loading data for Cube Characteristics
Hi Experts,
I have basic questions on loading of data for InfoCube characterisctis.
1.Suppose I have 6 dimensions and total 26 characteristics are in dimensions.Do I need to load master data for 26 characteristis.
2.I have master data InfoProvider say 0Customer ,it does have navigational attributes and display attributes.Do I need to define Navigational attribute as a Master data Infoprovider and load data for them or any other way.
Please clarify my doubts which I am facing in my project now.I will awarded for all inputs.
Thanks,
Rani
Edited by: Rani on Aug 24, 2008 4:18 AMHi,
Actually its not really clear what your doubt is... If you question is whether you can load data to infocube without maintaining master data for the characteristics - the answer is yes. You can do that; just make sure that you do not tick the option of checking master data while loading. -
Slow creating ReportDocument object and loading report
Hi all,
I realise this question has come up several times before, I've been searching the internet and have found similar problems but non that match my own. Sorry this is a little long winded but I would like to give as much detail as possible.
I use CR 2008 and VS2010 on my development machine. And I have installed CR 2008 Redist SP3 on the production server.
My application is a simple console application accepting parameters such as report name, print or export, and of course the report parameters.
CrystalDecisions.CrystalReports.Engine.ReportDocument rptDoc = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
rptDoc.Load(sParamDOC); //sParamDOC being the report name passed in via command line
It has to be like this because it integrates into an old system in the background. Of course it being like this means I can not pre-load dll's on application startup (as I've seen suggested several times).
All of this is in house, I'm an OU administrator and an administrator on the server. The server is only accessed via remote desktop and the OS is windows server 2003. I installed all of the neccesary software to make this work.
What is really puzzling me though is that when I use this program via command prompt, logged in as me, it creates the object and loads the report in a matter of seconds. Yet if anybody else runs it (even other administrators of the server) the program can take 30-60 seconds to create the ReportDocument object and the same again to load the report.
I initially only noticed this for the standard users, which was why I created another admin to test. I don't think it's a problem with the report design because it works quick for me. I read an article about this happening with reports created in Crystal version 9. So I tested with a report made from scratch in 2008 and still get the same result. I also read another article about default printers, 'dissociate printer' option is selected and locally the default printers are set to the same printer also.
Does anybody have any suggestions as to where I could look next?
I saw in another article some registry keys you can use to turn on logging for crystal reports, I want to do this but where does it put the log files?
Oh, one more thing the server orginally had redist 2.3 on when I noticed this issue, updating to SP3 (redist 3.3) if anything made it slower, and a little more inconsistant of load times.
Thanks
GavinI figured out what this was. I thought I would come back and post incase anyone else has the same issue... the reason it was slow for the other users is because they could not access the internet. My program doesn't use the internet but the operating system is automatically trying to verify the dll's publishers. you can disable this see the following blog:
[http://blogs.msdn.com/b/amolravande/archive/2008/07/20/startup-performance-disable-the-generatepublisherevidence-property.aspx|http://blogs.msdn.com/b/amolravande/archive/2008/07/20/startup-performance-disable-the-generatepublisherevidence-property.aspx]
Regards
Gav -
Creation and Change Date for Tcode and Function Groups
Hello All,
I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
regards,
MaheshHi,
TADIR and TRDIR is the tables where you can find all these data
Regards
Sudheer -
Performance and Load testing for Agentry applications in SMP2.3
Hello Experts,
We have a requirement to carry out the Performance and Load testing for our SAP Work Manager application (SMP2.3).
Please guide me if ATE (Agentry Test environment) / Jmeter / or any other testing tool can be utilized for the same.
Would be great if you could provide me the steps / references for the same.
Thanks,
AbhishekHi Abhishek,
Please refer this document Agentry - Assets for Admins & Architects. It has very good content which explains about performance testing and performance tuning.
Rgrds,
Jitendra -
Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoitThere is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up -
MacBook Pro was having Finder/Freezing issues, Tried restarting and now it wont reboot. Been stuck at the apple logo/loading screen for over an hour.
Step by Step to fix your Mac
Create a data recovery, undelete boot drive -
Hi All,
I have to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM. Either a table, or any Function module, Method, please let me know ASAP. Same i can use in my Program.
Thank you Very much.
Regards,
Ramesh J.Hi,
Refer the below wiki link it may help you.
Product catlog configuration for ECC - CRM - SCN Wiki
Maybe you are looking for
-
Getting parameter values from ITS to back end Modulepool program
Hi, I worked on external ITS developments for SRM project I was passing values from and to between ITS front end template and corresponding back end module pool program. I was using filed-set and field-get macro for passing values. It was working pe
-
I have two computers, my desktop has much more music on it, but my laptop is 10 times faster. I originally sync'd my iphone 4s with the desktop to try and keep the hard drive on the laptop from bogging down. My desktop is on it's way out and I'm tr
-
Calculated Date Range in Lookup Column
I want to have a lookup column on a list called Report Week. The report week is a date range between Sun and Sat. I could easily make a column of ranges in a seperate list and then use it as a lookup but I am hoping for something more elegant. Wha
-
Hi, I have a simple question, i have a column with a lot of non-word entries. All i need to select from that column are entries which are valid english characters. I tried this but this does not work: select a from abctest where not (regexp_instr(a,
-
How do I change my country in my apple account? Every time I sign in, the system automatically sends me back to the store my account is currently based in and I am unable to change this. I keep going in circles.