Creating this in flash

I took a job from my boss, and I really don't know how I will
go about doing this. I am very new to flash.
All I know is that I need something like this:
[URL=http://www.ryanair.com/site/EN/dests.php?flash=chk]Destinations
map [/URL]
I need something like this but for the whole world, where we
can put a mouse over the top of a point and see what routes are
established. This is for a game, where users create an airline and
their own routes. ANy helpful insight will be very much
appreciated!

"CanDurgut" <[email protected]> wrote in
message
news:f66e11$1b4$[email protected]..
>I have a deadline of next week for this.Is there any way
I could fin
>someone who can do this?
depending upon how many destinations you've got in mind,
you're looking at
at least one month lead-in time (assuming you want time for
creating the
graphics, getting approvals, tweaking, debugging and
testing)... and that's
only for what appears to be the "simple" part of your
project... if you're
planning on tying this into a game, there could very well be
many other
factors that could drag your project out and kill it without
the necessary
planning you guys have apparently been avoiding 'till now...
sorry for the
hard truth, but I think you're better off knowing just how
big a mountain
built from a molehill that you've got in front of yourself...
my condolences on your impending report to your boss... ;-p

Similar Messages

How to create this? A Flash Plugin?

I'm in CS3 / OS X I need to create the spinning effect that is in this link, I looked around and can't seem to find a way to do this.
http://www.jasonhildredesign.com/portfolio_flash/web_intro.html
any help?

No, you can use a third party app to create the images if you can't create them otherwise, but the key to creating this is placing a sequence of images in the timeline. It would be the same as if you made a little page flip animation, where each page has a different stage of motion position. Based on the speed of this one, I wouldn't be surprised if it only has a few images for each spin illusion.

Can I create MacOS on flash drive to run broken Imac?

So I've got an Imac that's all brokedy. Won't start up. I tried reinstalling Snow Leopard 10.6.7 on it from a boot disk, but got referred to Disk Utility. Disk Utility told me that the GB 500 drive was so fricked up that Disk Utility can't do a thing with it, I have to take it to a repair shop. But the Apple MacIntosh HD that's INSIDE the GB500 drive checks out OK according to Disk Utility.
It occurred to me that I could maybe install the Snow Leopard software into a flash drive and run the computer off of it, accessing the data and software on the MacIntosh HD via the flash drive, and at least being able to salvage important files that way. I'll need at least a 16 Gig flahs drive for that, no biggie, but my question is: is this feasible or some mad fantasy I've created out of an absurd desire not to get my wallet hijacked by Apple?

I think you'll find that your Hard Drive is failing, I hope you have some form of backup.
Your idea of creating a bootable flash drive could work but it will be useless if your HDD fails which according to your SMART status could happen soon.
I would make a full backup of your hard drive onto an external hard drive using Time Machine or another preferred backup method.
Then I would look into replacing the drive by myself or taking it to an Apple Store.
Good Luck!

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

Can anyone tell me how to do this in Flash? See the following link?

Can anyone tell me how to do this in Flash? See the following
link?
See this link. I want to know how to create the painting
excercise as made here.
http://disney.go.com/disneychannel/playhouse/littleeinsteins/activities/paint.html

Start by looking at the drawing api for AS

Can't creat a USB Flash key to recover my BIOS

Hi, i've been struggling for a week to make my Notebook back.
From what I've read, I need to make a BIOS recovery from a USB, but I can't get to make this USB key. I'm using a Cruzer Force 32gb Sandisk Pendrive. But the Bios recovery software doesn't recognize it.
I've already tried formatting the drive with FAT32 and rename it to HP_TOOLS. My laptop's recovery partition is missing.
Does it have any limitations? I'm talking about drive size or something else.
My warranty has already expired and I'd like to solve this myself.
Thanks in advance for reading.

Hi @Facu8990 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook and needing to create recovery usb drive. Here is a link to show you how.
Microsoft only allows 1 copy or USB to be created.
Do you receive an error message or number?
Here is a link to create a USB flash drive.
If all else fails then contact HP Support and Order the recovery disks. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here .
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How do I create an orange flash transition effect using Adobe Premiere CS6?

I am trying to create an orange flash transition effect using Adobe Premiere CS6 with my MAC computer.

Try this:
Add Cross Dissolve, cut and nest
Add a Fast Blur to the nest and tweak as in first screendump
Superimpose orange Color Matte and tweak as in second screendump
Make (fixed) effects into presets for future use.
Good luck.

How to create dynamic ed flash charts based on user selected fields in Orac

Hi all,
Can any of the experts please tellme "how to create dynamic ed flash charts based on user selected fields in Oracle apex".
Thanks
Manish

Hello,
Lots of different ways to do this, I blogged about one way (using a Pipelined function) here -
http://jes.blogs.shellprompt.net/2006/05/25/generic-charting-in-application-express/
Other options include using a PL/SQL function returning the string to use as the dynamic query etc.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Ever want to create a BIOS flash/rescue disk yourself?

Well, here is the trick:
First you have to reflash your BIOS at least one time with life update. During that process you get the question where to save the new version. It should something like this: X:\Program Files\Setup Files\MS-6702 v1.70
Where X is your system disk.
Well to (re)create a bootable flash/rescue floppy you just have to run: MSISetup.exe from that directory.
Some screenshots...
Click next
next...

And the rest...
After formatting setup is copying files...
Then click cancel on the following screen
You've now made a bootable flash/rescue disk!
And it works, I tested it. MSISetup makes the floppy bootable. You don't have to tranfer the system files while formatting.
Edit: O, just remember: if a new BIOS version comes out, just replace the AMIBOOT.ROM with the new file. Mostly called something like this: a6702vms.140, so you have to rename it first.

What programs used to create this site??

Hey there, I stumbled across this flash site and was
wondering if any of you had any ideas which programs would have
been used to create this site. Obviously flash for one, but would
they be importing rendered clips from say 3ds max? or perhaps swift
3d? I am wondering with things like the mail box, water etc. Or is
flash capable to achieve all of this.. Very impressive site none
the less..
http://www.saizenmedia.com

Hey great link. Man they are good. They have definitely used
some 3D programme like 3D Max or blender or even Maya maybe. I
don't think that Swift 3D has been used. The graphics are way too
complex. Also I think it is a combination of 3D software, vector
and image editing software.
Gaurav

Is this interactive flash movie possible in Adobe Edge?

Hi,
I´ve done this interactive flash applikation:
http://bit.ly/Uy6GEF
Is it possible to create this exactly the same in adobe edge? If you click on a hotspot, then a 3d-video (this video is already done in a 3d-animation-software) with a transparent background appears over the car-layer and on click to "back" it softly disapears.
(For this online version, I´ve just put a compressed video into "Gasoline & Diesel system". Normally, every hotspot has a different video.
So, are those interactions possible in Edge?
Best regards,
Maw

Everything except for the alpha transparency video is easily doable in Edge.
Rather then trying to shoehorn html5 video with an alpha transparency into Edge (not sure if this is doable), you could potentially use a png sequence or spriteSheet to play back those animations. Though the file size will be very large, and Edge does not have native implementation for png sequences or spriteSheet playback. yet.
John Dunning built a plugin for Fireworks to export a spritesheet as an Edge symbol:
http://johndunning.com/fireworks/about/EdgeAnimate

File created, now crashes Flash on open

I've created a file that I've worked on numerous times and
recently resaved as a new file.
Now, when I try to open that file, Flash crashes. I've moved
the file to other partitions, to an external drive and trashed the
main Flash preferences but still the file will not open.. the
interface of Flash comes up and WHAM, crash.
Other files open fine. The file isn't very big, about 1.8
megs
I want to add that I've tried to open the file as an external
library and that works. But, when I start a new file and try to
drag an item from the library to the new stage, it crashes.
Any other ways to try and get that open? I've even had a
friend open the file and resave and then resave as Flash 8 and it
doesn't open. I created this!! Crashes my Flash but not
hers?

I have had the same problem with several files, and the only
way I was able to get it to open, was to uninstall Flash, and then
reinstall it, then open my file. That has saved me twice now, but
COME ON, this should not be how one has to fix his/her projects.
Come on Adobe, fix the bug laden Flash CS4. Update is WAY over
due.

Creating Standby server ---- Flash archive/Alternate Boot Environment.

Dear All,
I want to patch upgrade the Centralized login server which holds more than 200 users. To avoid this production outage during the downtime of upgradation, we are planning to create all the logins and application in the alternate server manually. But i feel (lazy) hesitate to create logins and copy the applications in the statndby server. Since "chpasswd" is not in solaris, i can't copy the /etc/passwd & shadow file to standby server.
So i have the plan to achieve this by
i) creating flash archive of existing login server
ii) Creating Alternate boot environment in the standby server and flash restore the archive in it.
Whether the above mentioned plan is achievable, how to create the entire flash archive of solaris os?? and how to deploy it in the alternate boot environment.?
Regards,
Siva

Done, I've given the same path in Standby Database [datafiles, controlfiles] as it has been given in the Primary Database.
MoreOver, I m manually switching logfiles at primary database [alter system switch logfile] they are copied and applied sucessfully at standby database. But the archived files that I have copied with cold backup are not applied yet. Infact they are not retrieved executing the below query.
select name, applied from v$archived_log;
How can I apply those archived logs? [archives that copied with cold backup]
Regards.

How t o create breadcrumbs in flash cs 5 using action script 2.0?

how t o create breadcrumbs in flash cs 5 using action script 2.0?
If the user is going throungh some buttons then at last there is breadcrumb on last scene (like it is selected 1,2 or 3 button etc..)then final display should show last used button.
Am besically looking for breadcrumb.Can anyone know how to create breadcrumb with using movie clip?or any other code?
Can any one help me?

My problem is when i cross first,second and then third scene then on third scene if there is any crieteria like to show the value which user have used like if user have selected "a" on first scene and "b" on second scene.then on third scene if there is criteria-
first scene-
second scene-
then it should show value like-
first scene-"a"
second scene-"b"
This "a","b", have separet sound file.It should show "a","b" text and also sound should play after click on button.
Can any on help?

How much do I need to know in order to create this

I've thinking about this thing for a very long time - a thing that's really bugging me: the swatches panel's "list types".
Currently you can list your swatches as small or large thumbnails - or in a small or large list. Neither is really "satisfactory" to me.
I would like to have them in either a multi-column table or as a thumbnail matrix.
What would I need to create this and where do I start? I know no C++ at all, but I'm fairly good with scripting (learning javascript wouldn't be a problem) and I've used Flash in the past.
Also, I think that there's so little guiding material online: where are all plugin tutorials? I've found a few scripting tutorials but this task requires much bigger tools than a basic understanding of javascript.
So where the heck do I begin? Right now this task seems massive and time-consuming

You can't create that -- those functions are coded into the app and not accessible from a plugin.
The SDK contains very extensive documentation and examples on writing plugins.
And yes, writing C/C++ code does require more knowledge than writing scripts.

Creating this in flash

Similar Messages

Maybe you are looking for